Nedap N V VP1801 RFID system User Manual

N. V. Nederlandsche Apparatenfabriek NEDAP RFID system Product name

a href="https://usermanual.wiki/Nedap-N-V" itemprop="url"> Nedap N V >

Manual

   Doc. part. no. 5278724 / Manual version 1.0 / 08-2016 EN Quick start manual VP1801 Reader Motor Control This sheet is only intended as quick start. See service manual for detailed instructions.  The VP1801 is a Velos component that is used to identify animals for feeding, weighing, milking, heat detection etc. The VP1801 is equipped with an internal switch to support a double Ethernet connection (web interface ready) and the existing VC3 interface. The Ethernet channel is used for the main functionality and communication like software updates and service. An extra communication channel is available for the VC3 systems. The function is the same as the existing Single Feeder. The VP1801 can be installed in a V-box.
Quick start manual | VP1801 Reader Motor Control   2 A VP1801 can be connected in different ways:   To a shielded Ethernet cable and controlled by a switch or VPU:                                                                                                                                                                                     When connecting the Ethernet cable, the VP1801 automatically detects TX/RX , plus and minus connections, and switches to the correct connection.    To a shielded four wire cable and controlled by a VC3 host:                       The SYNC connection is necessary for HDX ISO synchronization between other readers. For FDX a SYNC connection is possible, but not necessary if only one antenna is used. When two antennas are used the SYNC connection is always needed, even when FDX-only (no ISO) mode is enabled. The switching between the two antennas uses the ISO timing.  The F SYNC connection is necessary when the distance between two antennas is ≤ 3 m. Connect the F SYNC as shown in the picture below.                                      + - 1. Shielded cable 2. Shielded cable, shield not connected to VP1801.   LAN next VP1801  Power supply VC3 next VP1801  + - DR DS + - DR DS VC3 interface bridge Vin next VP1801  SYNC next VP1801  1. Shielded cable 2. Shielded cable, shield not connected to VP1801.   Switch VPU  F SYNC I next VP1801  O5 minus next VP1801
Download:
Mirror Download [FCC.gov]
Document ID3114501
Application IDJJOzqcnZxEQTPUQYWePqLQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize56.34kB (704223 bits)
Date Submitted2016-08-28 00:00:00
Date Available2016-08-30 00:00:00
Creation Date2016-08-23 15:49:47
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2016-08-23 15:49:47
Document TitleProduct name
Document CreatorMicrosoft® Word 2013
Document Author: Debbie van Rijswijk
FCC ID Filing: CGDVP1801

Navigation menu