Neets A S 313-0001 Touch Panel User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3558768
Application ID	MmUttayHAqKJ8Fv1hKlwMg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.23kB (540399 bits)
Date Submitted	2017-09-13 00:00:00
Date Available	2017-09-13 00:00:00
Creation Date	2017-06-22 09:03:14
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-09-01 23:07:26
Document Title	User Manual
Document Creator	Adobe InDesign CC 2017 (Macintosh)

Installation guide
Neets Touch Panel™
Thank you!
Thank you for including the Neets Touch
Panel as part of the user interface strategy
for your customer.
Specifications
Physical Dimensions:
H: 120 mm
W: 180 mm
D: 41,4 mm
In wall: 25,4 mm
On wall: 17,7 mm
Shipping dimensions:
65 mm x 280 mm x 240 mm (HxWxD)
Weight:
Product: 0,33 Kg
Wall Bracket: 0,175 Kg
Shipping: 0,85 Kg
Connections:
RJ45 with POE – For both Power and Ethernet
communication
Switches:
Pen hole switch:
1: Access to Admin settings
2: Factory Reset switch
3: For FW upgrade only
Touch Screen:
5-point capacitive touch screen
Scratch resistant glass-on-glass touch screen
Display:
7” IPS Display,
Resolution: 1024x595 pixels
Brightness: 350 nits (cd/m2)
Sensors:
Proximity sensor – For automatic display activation
Ambient Light sensor – For automatic backlight dimming
Power:
Power Over Ethernet (POE), IEEE802.3af, 48V (PoE injector
not included)
Environment:
Operating Temp: 0 to 40 C / 32 to 104 F
Storage Temp: 0 to 60 C / 32 to 140 F
Operation moisture: Humidity: 10% to 90% RH
Compliancy:
CE, FCC
Doc. 313-001-001 Rev. 2
What’s in the box
Wall mount bracket
7” Touch Panel
Cloth
Ejector pin for
menu settings
4 x Screws
USB OTG adapter (for application
and firmware upgrade)
4 x Wall plugs
Front
Proximity
sensor
Ambient light
sensor
180 mm
120 mm
Back
Magnet
Factory Reset
Firmware upgrade
USB
LAN/POE
Magnet
Magnets
Settings button
Steps
Touch Panel position
Mount Touch Panel on bracket
Bracket details
Connect PoE injector
Mounting the bracket
First start up
Connect LAN/PoE
1
Touch Panel position
The Touch Panel is designed to wall
mount in landscape orientation, and
depending on how tall the users are we
recommend locating the center of the
touch panel between 145 cm. – 165 cm.
(57” – 65”) above the finish floor.
165 cm / 65 in.
145 cm / 57 in.
2
Bracket details
The Touch Panel is designed to mount
into a 1- or 2-gang back box in EU, US or
DK standards or can be mounted without
a back box.
When using EU and US standards use
the threads that are already in the back
box and secure the bracket with fitting
screws.
When using a DK standard back box use
the holes marked with “W” for mounting
directly on the wall.
To mount the Touch Panel without back
box use holes marked with “W”.
The numbers on the bracket
refers to the back box it is
intended for.
EU 1-gang back box
EU 2-gang back box
US 1-gang back box
US 2-gang back box
Holes for mounting
directly into the wall
Alignment holes –
do not use these for screws
10
3
Mounting the bracket
When mounting the Touch Panel into a
EU/US back box follow the steps below.
In case you are not mounting on a EU/US
back box skip step 1.
Before you start make sure the wall is
even to prevent distorting the bracket.
11
Mount the bracket onto the back box
using the screws and screw holes for the
specific type of back box (see page 10)
Remove the bracket again
Level the bracket on the wall
(When mounting onto a back box do this
before tightening the screws)
Drill and insert wall plugs
Mark the center of the W-holes in the
bracket
Mount the bracket and tighten the screws
into the wall
12
4
Connect LAN / PoE
Connect the PoE cable from the wall
to the Touch Panel.
Note: PoE is not included, but you can
use the PoE Injector (Part number
302-000508).
13
5
Mount Touch Panel on bracket
Place the Touch Panel onto the bracket.
Make sure it is placed correctly and
the alignment holes are free to fix the
Touch Panel to all four magnets.
14
6
Connect PoE injector
Power outlet
PO
15
LA
LAN switch
7
First start up
The Touch Panel will automatically
power on when power is applied.
Wait for the unit to start up and
follow the instructions.
For a complete configuration guide
please go to:
www.neets.dk/products/touchpanels/155
You will find the instructions for
firmware updates the same place.
16
Removing the Touch Panel
Using two hands grasp on each
side of the Touch Panel and pull
straight out from the wall.
17
Learn more at neets.dk
Visit our website neets.dk for additional information
about the product and the latest firmware.
Neets A/S | Langballe 4, 8700 Horsens, Denmark | +45 75 666 099 | sales@neets.dk | www.neets.dk
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2017:06:22 09:03:14+02:00
Metadata Date                   : 2017:09:01 23:07:26+08:00
Modify Date                     : 2017:09:01 23:07:26+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:ac81cbca-6635-4e2d-9f98-6ba1d3ddb614
Original Document ID            : xmp.did:e56cce5c-47c8-4b64-a7fb-df0e539f9d8c
Document ID                     : xmp.id:a0c9a978-f6e8-4cd5-8edc-7a40323dcbd1
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:06cd2426-f258-456b-a284-ba0efd2245ba
Derived From Document ID        : xmp.did:3217a0d6-aa23-4cb3-9877-35185ef7e20d
Derived From Original Document ID: xmp.did:e56cce5c-47c8-4b64-a7fb-df0e539f9d8c
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:06:22 09:03:14+02:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 20
Language                        : da-DK
Creator                         : Adobe InDesign CC 2017 (Macintosh)

EXIF Metadata provided by EXIF.tools