Nero MediaHome Media Home User Guide Eng
User Manual: Nero MediaHome - User Guide Free User Guide for Nero Software, Manual - page1
Open the PDF directly: View PDF 
.
Page Count: 35
| Download | |
| Open PDF In Browser | View PDF |
QuickStart Nero MediaHome Nero AG Information on copyright and trade marks The Nero MediaHome QuickStart and all its contents are protected by copyright and are the property of Nero AG. All rights reserved. This QuickStart contains materials that are protected by internationally valid copyright laws. This QuickStart may not - in whole or in part - be copied, transmitted or otherwise reproduced without the express written permission of Nero AG. All trade names and trademarks are the property of the respective owners. Nero rejects any claims that transcend the clauses of the guarantee rights. Nero AG does not undertake any liability for the correctness of the content of the Nero MediaHome QuickStart. The contents of the software supplied as well as of the Nero MediaHome QuickStart may be changed without prior warning. The trademarks mentioned here are named for information purposes only. Copyright © 2005 Nero AG REV 1.0 Table of contents 1 2 3 4 5 6 General information .......................................................................... 5 1.1 About Nero MediaHome................................................................... 5 1.2 System requirements....................................................................... 5 1.3 1.3.1 1.3.2 1.3.3 1.3.4 Formats supported........................................................................... 6 Audio formats supported .................................................................... 6 Video formats supported .................................................................... 6 Image formats supported ................................................................... 6 Meta data ........................................................................................... 7 1.4 Installation ........................................................................................ 7 1.5 Conventions of the manual ............................................................. 8 Launching the program .................................................................... 9 2.1 Launching Nero MediaHome........................................................... 9 2.2 2.2.1 2.2.2 Starting Nero MediaHome Server ................................................... 9 Starting Nero MediaHome Server automatically .............................. 10 Starting Nero MediaHome server manually ..................................... 11 Sharing ............................................................................................. 12 3.1 Sharing directories......................................................................... 12 3.2 Sharing media types ...................................................................... 13 Settings ............................................................................................ 14 4.1 Server and cache settings............................................................. 14 4.2 Autostart and tray settings............................................................ 16 Network ............................................................................................ 18 5.1 Change network name ................................................................... 18 5.2 Specifying the port number........................................................... 19 5.3 Network connections ..................................................................... 20 Nero Premium Web Services.......................................................... 21 6.1 6.1.1 6.1.2 6.1.3 Nero MediaHome Nero Premium Web Service settings............................................ 21 Selecting the Web service................................................................ 22 Specifying the update options .......................................................... 23 Enabling Internet proxy .................................................................... 24 Table of contents • 3 7 Transcoding..................................................................................... 25 7.1 7.1.1 7.1.2 7.1.3 8 Status ............................................................................................... 31 8.1 9 Calling up the pop-up menu.......................................................... 32 Contact ............................................................................................. 33 10.1 Nero MediaHome Obtaining status information ........................................................ 31 Pop-up menu ................................................................................... 32 9.1 10 Transcoding settings ..................................................................... 25 Transcoding audio files .................................................................... 26 Transcoding video files..................................................................... 27 Transcoding image files ................................................................... 29 Contact details................................................................................ 33 11 Glossary ........................................................................................... 34 12 Index ................................................................................................. 35 Table of contents • 4 1 1.1 General information About Nero MediaHome Nero MediaHome is a certified UPnP™ AV (Audio / Video) Media Server, which automatically recognizes UPnP™ (Universal Plug and Play) within a network. With Nero MediaHome, audio, video and photo files can be exchanged between computers via the local network (using Nero ShowTime) or UPnP™ devices. It is also possible to stream the files, either with HTTP 1.0 or HTTP 1.1 (depending on the best possible compatibility). Nero MediaHome is thus a server application that allows clients (servicerequesting devices) to reproduce files that are located in shared lists. Thanks to Nero MediaHome, your computer can link up to other home entertainment electronics devices (for instance television sets, or stereos) to create a unified media center. But Nero MediaHome is much more besides; it also classifies the media files within your network. You will find a list of the certified UPnP devices at: http://www.upnp-ic.org/certification/ - devices 1.2 System requirements Nero MediaHome is installed together with NeroVision Express 3 - the system requirements are the same. You can find more detailed information on system requirements in the NeroVision Express 3 manual. Nero MediaHome General information • 5 1.3 Formats supported Nero MediaHome supports the most common audio, video, image, and meta file formats. 1.3.1 Audio formats supported MP3 MP4 (audio) WAVE AAC HE-AAC OGG Vorbis WMA AC3 AIFF 1.3.2 Video formats supported MPEG-1 MPEG-2 DV-AVI AVI DivX Xvid ASF WMV MP4 (video) 1.3.3 Image formats supported JPEG PNG GIF BMP TIFF Nero MediaHome General information • 6 1.3.4 Meta data Meta data contains information on the artist, album, title, length, bit rate, resolution, and so on. As a result, it is possible to categorize files according to their type (audio, video, or photos) and the user will then find them sorted according to artist, album, and genre, for example. Nero MediaHome supports the following formats' meta data: ID3 tags (V1.1/V2) JPEG PNG BMP GIF TIFF AVI MPEG-1 MPEG-2 Nero Digital™ (MPEG-4) WMV ASF MP3 OGG Vorbis WAV WMA 1.4 Installation Nero MediaHome is not installed separately but together with NeroVision Express 3. In other words, after installing NeroVision Express 3 you will automatically have Nero MediaHome, as well. Nero MediaHome General information • 7 1.5 Conventions of the manual In order to make best use of this manual, please note the following conventions: Formatting / symbol Meaning This symbol stands for warnings, preconditions or instructions that have to be followed strictly. If a text is marked with this symbol, its contents are important for the procedure concerned. This symbol refers to additional information or advice. If a text is marked with this symbol, it should be understood as supplementary information. Nero MediaHome 1. Start … If there is a number at the beginning of a line, a request for action will follow. Carry these actions out in the order specified. 'OK' In this QuickStart, text passages or command buttons which appear in the Nero MediaHome program interface are made in single quotes: 'X'. "Section" References to other sections in this QuickStart are made in (double) quotation marks: "X". General information • 8 2 2.1 Launching the program Launching Nero MediaHome You can start Nero MediaHome in two different ways – either directly or via Nero StartSmart, the 'command center' of the Nero family of products. Launch > (All) Programs > NeroVision Express 3 > Nero MediaHome. 2.2 Starting Nero MediaHome Server Depending on the setting, Nero MediaHome Server will either be launched automatically when you start Nero MediaHome or only after you have clicked on the appropriate button. You can choose which alternative you prefer at 'Settings', please read the "Settings" section. Before starting the server, please share at least one folder, otherwise the clients will not find any files that they can use. If Nero MediaHome Server is active, the digital player devices found in the network will be displayed in the 'Status' area - as well as the files that a client is currently using. Nero MediaHome Launching the program • 9 2.2.1 Starting Nero MediaHome Server automatically If the 'Settings' icon has been highlighted and the appropriate check box in the autostart and tray area ticked, Nero MediaHome Server will start automatically when Nero MediaHome is launched. Nero MediaHome Launching the program • 10 2.2.2 Starting Nero MediaHome server manually If the option to automatically start Nero MediaHome Server has been disabled, the server will only start if you click on the 'Start Server' button to initiate it. Nero MediaHome Launching the program • 11 3 3.1 Sharing Sharing directories You can only share directories when Nero MediaHome Server has not been started. If it is has already been started, please disable it by clicking on the 'Stop Server' button. 1. Start Nero MediaHome and highlight the 'Shared directories' icon. 2. Click on the 'Add Share' button and, in the window that opens, select the directory you would like to share. Please note: only the files located in this folder will be shared; any subfolders which may exist will not be shared. 3. Repeat this folder-sharing procedure until all the directories selected are shared. Nero MediaHome Sharing • 12 3.2 Sharing media types Nero MediaHome allows access to music, video and image files. However, if you want, you can share particular types of media only. 1. Start Nero MediaHome and highlight the 'Shared directories' icon. 2. Look in the 'Shared Media' area to see which types of media have been shared. If the 'All' check box has been ticked, then all types of media, i.e. music, video and image files will be shared. 3. Clear the 'All' check box only if you want to share specific types of media. 4. Highlight the selected types of media that you wish to share. If you would like to make a special selection of data types within the various types of media, click on the 'Advanced' button and highlight or deselect the file types concerned and then click on 'OK' to save the changes and to close the window. Example: If you do not want to share the 'mp4' file type from the 'Video' media type, then disable it. Nero MediaHome Sharing • 13 4 4.1 Settings Server and cache settings You can only make changes to the server and cache settings if Nero MediaHome Server has not been launched. If it is has already been started, please disable it by clicking on the 'Stop Server' button. Nero MediaHome let you make server and cache settings order to reduce the server's response time. 1. Start Nero MediaHome and highlight the 'Settings' icon. Nero MediaHome Settings • 14 2. Tick or clear the desired check box or click on the appropriate buttons. Number Explanation Nero MediaHome 1 If this has been activated, unknown filename extensions will be displayed in the client (e.g. Nero ShowTime). 2 If activated, Nero MediaHome Server will obtain the shared media from the hard disk by pre-caching, even though no client had requested data. As a result, the Nero MediaHome response time is reduced, though the server's start-up time is extended. 3 Clicking this button will delete the meta files contained in the cache memory. The next start the server is started, the current meta data will be read again – this prolongs the server's start-up time. If shared files have been removed it is particularly important to delete the meta data, in other words the meta files contained in the cache memory no longer correspond to the files being reproduced. 4 Clicking on this button will manually activate information and warnings that have been disabled. Example: Before Nero MediaHome Server is started, a security warning is given so that files in the network can be unblocked. You have to click on 'OK' to continue – only then will the server be started and the files shared. If this warning has been disabled, it will appear again after you have clicked on this button. Settings • 15 4.2 Autostart and tray settings Nero MediaHome can be launched automatically when the computer is switched on. You can make these and other settings at 'Autostart and tray settings'. 1. Start Nero MediaHome and highlight the 'Settings' icon. Nero MediaHome Settings • 16 2. Tick or clear the check boxes as desired. Number Explanation If this has been ticked, Nero MediaHome will be launched 1 automatically when the computer is started. If this has been ticked, Nero MediaHome Server will be launched 2 automatically when Nero MediaHome is started. If this option has been chosen, the program window will not appear 3 once Nero MediaHome has been launched. Instead, the program will be minimized and put in the system tray. If this has been checked, Nero MediaHome will be placed in the 4 system tray when it is minimized. The Nero MediaHome icon will always appear in the system tray if 5 this option has been selected, in other words, even if the program window is open. Nero MediaHome Settings • 17 5 5.1 Network Change network name 1. Start Nero MediaHome and highlight the 'Network' icon. 2. In the 'Network name' box, enter the desired network name. You can only change the name of the network or the port settings if Nero MediaHome Server has not been launched. If it is has already been started, please disable it by clicking on the 'Stop Server' button. Nero MediaHome Network • 18 5.2 Specifying the port number 1. Start Nero MediaHome and highlight the 'Network' icon. 2. Select the option you prefer. Number Explanation 1 If this is selected, Nero MediaHome will use a new port each time the program is launched. This option is recommended because it reduces conflicts with other devices. 2 If this option is selected, Nero MediaHome will use a fixed port each time it is started. This option makes it necessary to specify a port number. This setting has the advantage that (when streaming files) the port number is identical even when Nero MediaHome is restarted, and the file can be played again. If, on the other hand, the port number has been changed, it will no longer be possible to play back the file. You can only change the name of the network or the port settings if Nero MediaHome Server has not been launched. If it is has already been started, please disable it by clicking on the 'Stop Server' button. Nero MediaHome Network • 19 5.3 Network connections In this area you can see the network connections that have been installed, their conditions, the name of the network card, the computer's IP address and the network type. Nero MediaHome supports the use of a number of network cards at the same time. 1. Start Nero MediaHome and highlight the 'Network' icon. 2. Select the network interface(s) that you would like to assign to Nero MediaHome. Please note that you can only assign interfaces that belong to the local area network (LAN). Nero MediaHome Network • 20 6 6.1 Nero Premium Web Services Nero Premium Web Service settings The settings for the Nero Premium Web Service are found here. 1. Start Nero MediaHome and highlight the 'Web Services' icon. You can only change the settings for the Nero Premium Web Service when Nero MediaHome Server has not been launched. If it is has already been started, please disable it by clicking on the 'Stop Server' button. Nero MediaHome Nero Premium Web Services • 21 6.1.1 Selecting the Web service If you would like to take advantage of the Nero Premium Web Services, you will need a functioning Internet connection. 1. Start Nero MediaHome and highlight the 'Web Services' icon. 2. Tick the appropriate check box if you would like to access 'Nero Premium Web Services'. You can only select Nero Premium Web Services when Nero MediaHome Server has not been launched. If it is has already been started, please disable it by clicking on the 'Stop Server' button. Nero MediaHome Nero Premium Web Services • 22 6.1.2 Specifying the update options 1. Start Nero MediaHome and highlight the 'Web Services' icon. 2. Tick the appropriate check box if you would like to use 'Nero Premium Web Services'. 3. Specify which update option you prefer: the automatic option, which checks whether an update is available for the Web Service each time Nero MediaHome is started, or the manual option, allowing searches for an update only when you click on the 'Update now' button. You can only change the update method or the settings for the Nero Premium Web Service when Nero MediaHome Server has not been started. If it is has already been started, please disable it by clicking on the 'Stop Server' button. Nero MediaHome Nero Premium Web Services • 23 6.1.3 Enabling Internet proxy Nero MediaHome can also operate as a proxy server if you would like the clients connected to have access to media that is to be found on the Internet. Example: You have a laptop without Internet access, to which Nero ShowTime (amongst other programs) has been installed. This laptop forms part of a network with Nero MediaHome, which has been set up in such a way that it operates as an Internet proxy. Nero ShowTime can now access the desired files on the Internet via the Nero MediaHome Server, without the need to have a direct Internet connection. 1. Start Nero MediaHome and highlight the 'Web Services' icon. 2. Tick the appropriate check box if you would like Nero MediaHome to operate as an Internet proxy. You can only change the Internet proxy settings when Nero MediaHome Server has not been launched. If it is has already been started, please disable it by clicking on the 'Stop Server' button. Nero MediaHome Nero Premium Web Services • 24 7 7.1 Transcoding Transcoding settings Here you can find the settings for transcoding audio, video and image files. 'Auto-detect' should be the standard setting with all formats – it means that the original format is used when playing. If a client is not capable of playing a particular format, when this setting is chosen the file will be transcoded prior to reproduction. This procedure calls for computing capacity and may possibly impair the quality of reproduction. 1. Start Nero MediaHome and highlight the 'Transcoding' icon. You can only change the transcoding settings when Nero MediaHome Server has not been launched. If it is has already been started, please disable it by clicking on the 'Stop Server' button. Nero MediaHome Transcoding • 25 7.1.1 Transcoding audio files Nero MediaHome can transcode audio files if you prefer a specific format. However, we recommend transcoding audio files only if the client cannot reproduce the original format, as this procedure may impair the quality of reproduction. 1. Start Nero MediaHome and highlight the 'Transcoding' icon. 2. Click on the dropdown button in the transcoding area for audio and choose the option you prefer. Nero MediaHome Setting Explanation Retain original format Nero MediaHome will not check whether the client can play the desired file – instead the original format will be retained. Auto-detect Nero MediaHome checks whether the client can reproduce the format before transferring the file. If this is the case, the original format will be preserved. If the client cannot play the file, Nero MediaHome will 'ask' which formats can be read and will then transcode the file. Transcoding • 26 MP3 Each file will be transcoded into the target format if it is not available in the desired format. WAVE Each file will be transcoded into the target format if it is not available in the desired format. AAC Each file will be transcoded into the target format if it is not available in the desired format. HE-AAC Each file will be transcoded into the target format if it is not available in the desired format. You can only change the transcoding settings when Nero MediaHome Server has not been launched. If it is has already been started, please disable it by clicking on the 'Stop Server' button. 7.1.2 Transcoding video files Nero MediaHome can transcode video files if you prefer a specific format. However, we recommend transcoding video files only if the client cannot reproduce the original format, as this procedure may impair the quality of reproduction. 1. Start Nero MediaHome and highlight the 'Transcoding' icon. 2. Click on the dropdown button in the transcoding area for video and choose the option you prefer. Nero MediaHome Transcoding • 27 Setting Explanation Retain original format Nero MediaHome will not check whether the client can display the desired file – instead the original format will be retained. Auto-detect Nero MediaHome checks whether the client can reproduce the format before transferring the file. If this is the case, the original format will be preserved. If the client cannot play the file, Nero MediaHome will transcode the file into the format with the best quality. MPEG-1 Each file will be transcoded into the target format if it is not available in the desired format. MPEG-1 (low bit rate) Each file will be transcoded into the target format if it is not available in the desired format. MPEG-2 Each file will be transcoded into the target format if it is not available in the desired format. MPEG-1 (high bit Each file will be transcoded into the target format if it is not available in the desired format. rate) MPEG-2 (low bit rate) Each file will be transcoded into the target format if it is not available in the desired format. Nero Digital / MPEG-4 Each file will be transcoded into the target format if it is not available in the desired format. Nero Digital / MPEG-4 (low bit rate) Each file will be transcoded into the target format if it is not available in the desired format. 3. Click on the dropdown button in the transcoding area for video and choose the option you prefer. Nero MediaHome Setting Explanation NTSC Video files are transcoded in accordance with the NTSC standard. PAL Video files are transcoded in accordance with the PAL standard. Original resolution The original resolution is employed. Transcoding • 28 You can only change the transcoding settings when Nero MediaHome Server has not been launched. If it is has already been started, please disable it by clicking on the 'Stop Server' button. 7.1.3 Transcoding image files Nero MediaHome can transcode image files if you prefer to use a specific format. However, we recommend transcoding image files only when the client cannot reproduce the original format, as this procedure may impair the quality of reproduction. 1. Start Nero MediaHome and highlight the 'Transcoding' icon. 2. Click on the dropdown button in the transcoding area for images and choose the option you prefer. Nero MediaHome Setting Explanation Retain original format Nero MediaHome will not check whether the client can display the desired file – instead the original format will be retained. Transcoding • 29 Auto-detect Nero MediaHome checks whether the client can reproduce the format before transferring the file. If this is the case, the original format will be preserved. If the client cannot play the file, Nero MediaHome will transcode the file into the format with the best quality. JPEG Each file will be transcoded into the target format if it is not available in the desired format. PNG Each file will be transcoded into the target format if it is not available in the desired format. BMP Each file will be transcoded into the target format if it is not available in the desired format. 3. Click on the dropdown button in the transcoding area for images and choose the option you prefer. Setting Explanation NTSC Image files are transcoded in accordance with the NTSC standard. PAL Image files are transcoded in accordance with the PAL standard. Original resolution The original resolution is employed. You can only change the transcoding settings when Nero MediaHome Server has not been launched. If it is has already been started, please disable it by clicking on the 'Stop Server' button. Nero MediaHome Transcoding • 30 8 8.1 Status Obtaining status information If the server is active, you will see (in real time) the status information, the streaming clients, the number of connection queries, the amount of data transferred, and so on. If the server is not active, this area will not contain any entries. 1. Launch Nero MediaHome, highlight the 'Status' icon and inform yourself when the server has been launched about the server status. Nero MediaHome Status • 31 9 9.1 Pop-up menu Calling up the pop-up menu If the Nero MediaHome icon is situated in the system tray, you can open the pop-up menu by clicking on the right-hand mouse button. The chosen action will be carried out by highlighting the appropriate command. Nero MediaHome Number Explanation 1 Clicking on this command will return you to the Nero MediaHome window last shown. 2 If you click on this command you will start up or close down Nero MediaHome Server. 3 Clicking on a command in this section will open the corresponding Nero MediaHome feature. 4 Clicking on this command will provide information on Nero MediaHome. Among other things, you will be informed of the current version number of the program, as well as the address of Nero AG and a link to the http://www.nero.com/ homepage. 5 Clicking on this command will close Nero MediaHome. Pop-up menu • 32 10 Contact 10.1 Contact details Nero MediaHome has been created by Nero AG. Nero AG Im Stoeckmaedle 18 76307 Karlsbad Germany Internet: www.nero.com Help: http://englishsupport.nero.com/ http://germansupport.nero.com http://frenchsupport.nero.com E-Mail: techsupport@nero.com Hotline: 0190 871086 (only accesible from within Germany: € 1.86 per min) Fax: +49 7248 928 499 Copyright © 2005 Nero AG. All rights reserved. Nero MediaHome Contact • 33 11 Glossary Client A client is a computer, program or device, that utilizes the services of a server. For example, Nero ShowTime is a client for Nero MediaHome. Server A server is a computer or program, which provides data and resource clients. For example, Nero MediaHome is a server for Nero ShowTime. Streaming Streaming means the continuous transmission of data that can already be heard or played during the transmission procedure. This means it is unnecessary to wait until a media file has been transmitted completely before it can be reproduced. UPnP Abbreviation of "Universal Plug and Play". UPnP™ is a manufacturerindependent system for controlling devices in a local area network; it can be used to connect peripheral devices to a PC in order to create a home network. Nero MediaHome Glossary • 34 Port number 17 Pre-caching 14 Program start 9 12 Index S Selecting the Nero Premium Web Service 20 Server settings 13 Sharing directories 11 Sharing media types 12 A Starting Nero MediaHome server Manual 10 Activating information 14 Autostart settings 14 Starting Nero MediaHome Server 9 Automatic 10 C Cache settings 13 Contact 31 Conventions 8 Status information 29 T Transcoding Audio files 24 E Enabling Internet proxy 22 I image files 27 Settings 23 Video files 25 Tray settings 14 Image formats 6 Installation 7 L Launching Nero MediaHome 9 M V Video formats 6 W Web Service update 21 Meta data 7, 14 N Nero Premium Web Service settings 19 Network 16 Network connections 18 P Pop-up menu 30 Nero MediaHome Index • 35
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Page Count : 35 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:1aeae8f0-05d4-4be6-98eb-44de107a4248 Producer : Acrobat Distiller 6.0 (Windows) Source Modified : D:20050103092806 Headline : Create Date : 2005:01:03 16:21:24+01:00 Creator Tool : Acrobat PDFMaker 6.0 for Word Modify Date : 2005:01:03 16:25:08+01:00 Metadata Date : 2005:01:03 16:25:08+01:00 Document ID : uuid:bcc128d6-3993-4747-b41f-97da247a5c6e Version ID : 8 Format : application/pdf Title : Nero MediaHome Creator : Nero AG Subject : Tagged PDF : Yes Author : Nero AGEXIF Metadata provided by EXIF.tools