NetComm Wireless POE02 PoE Injector User Manual NTC 05 Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	3018624
Application ID	VneNxKgZnjTueh6kVy+AlQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.88kB (336016 bits)
Date Submitted	2016-06-06 00:00:00
Date Available	2016-12-04 00:00:00
Creation Date	2016-04-11 11:26:26
Producing Software	Microsoft® Word 2016
Document Lastmod	2016-05-24 16:11:34
Document Title	NTC-05 Quick Start Guide
Document Creator	Microsoft® Word 2016
Document Author:	johnm

Installation Guide
POE-02 – Antenna Power Supply
Welcome
Thank you for choosing a NetComm Wireless Antenna Power Supply. This guide provides simple instructions to help you quickly
and easily set up your device.
Package contents
This package includes:
1 x Antenna Power Supply
1 x Power cord with North American plug (ungrounded)
Device overview
POE-02 Installation Guide
v1.0
ITEM
DESCRIPTION
Blue RJ45 port
Provides Data + Power to the antenna.
Red RJ45 port
Provides Power to the Residential Gateway.
Power switch
Turns the antenna power supply on or off.
IEC-C8 (Figure 8) power inlet
Accepts the included power cable to provide power to the Antenna Power Supply.
POE-02 LED indicators
POWER
ANTENNA
The table below describes the status of the POWER and ANTENNA LEDs on the PoE injector.
LED
STATUS
DESCRIPTION
POWER
Solid green
PoE injector is connected to AC power.
ANTENNA
Solid green
PoE injector is connected to AC power and the POE port is connected to the OWA.
POE-02 Installation Guide
v1.0
Installing the Antenna Power Supply
Power over Ethernet (PoE) is a method of connecting network devices through Ethernet cable where power and data are passed
along a single cable. It is therefore a convenient method of powering the Outdoor antenna.
To supply power to the Outdoor antenna:
1.
Connect a straight-through Ethernet cable (not included in the package) to the Ethernet port of the Outdoor antenna then
connect the other end of the cable to the Blue RJ45 Ethernet port on the POE-02.
2.
Use another Ethernet cable (not included in the package) to connect the indoor router to the Red RJ45 Ethernet port of
the POE-02.
3.
Connect the power cable to the POE-02 and then plug it in to an available wall socket. Examine the Power and ANTENNA
LEDs of the POE-02 and compare them with the LED table below. When both the POWER and ANTENNA LEDs are solid
green, the Outdoor antenna is correctly powered and connected.
POE-02 Installation Guide
v1.0
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
POE-02 Installation Guide
v1.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2016:04:11 11:26:26+10:00
Creator Tool                    : Microsoft® Word 2016
Modify Date                     : 2016:05:24 16:11:34+08:00
Metadata Date                   : 2016:05:24 16:11:34+08:00
Format                          : application/pdf
Creator                         : johnm
Title                           : NTC-05 Quick Start Guide
Producer                        : Microsoft® Word 2016
Document ID                     : uuid:e26d6c01-0f22-4be8-91d6-279c499aba8b
Instance ID                     : uuid:6211eb2a-4531-4d51-af8a-99106fb12831
Page Count                      : 5
Language                        : en-AU
Author                          : johnm

EXIF Metadata provided by EXIF.tools