NetView Technologies NI-1300 NETVUE II User Manual USER MANAUL

NetView Technologies (Shenzhen) Co., Ltd. NETVUE II USER MANAUL

Users Manual

     User’s Manual NETVUE II   Model Number: NI-1300, NI-1301, NI-1302          NetView Technologies keeps the right of the document updated with the new service offer or the service change Version:1.2
  1  Basic installation  1. Plug in the included Ethernet cable to the Ethernet port on the backside of the camera and connect it to the Ethernet port (Not WAN port) of the router, so as to access internet. (Note: DHCP service of the router must be available. You can check the DHCP service by a computer. The computer can automatically obtain IP address if the DHCP service is available. If not, please refer to User’s Manual of the router on how to set up DHCP.)  2. Plug in the included power adapter to the DC input port on the backside of the camera and connect it to an AC power outlet (Before connecting power, please check whether the power adapter and the power outlet are in good condition.). The camera is well powered if the Power indicator on the camera’s back panel stays lit in red.             Note: The Status indicator stays lit in green when the camera is working well.   After the basic installation, now you can choose to use or set the NetVue II camera by PC, iPhone, iPad, iPod touch, or android phone and tablet PC. Please refer to the specific instruction below accordingly. Some helpful tips are given only in the Part I below and not repeated in other two parts.    Part I.    Operate NetVue II camera by PC 1. Login to the website       Enter www.mynetvue.com in the address bar with a browser and come to camera’s login interface. You are able to manage your camera by this web system.  2. Register for a user account   On the login interface, click Sign Up for free and enter user register interface. Complete your register by following the prompt. Please fill with your correct information and read carefully the NetView Terms of Use. (Note: Email is required for password regain. Please ensure it correct.) Important note: One camera which has been in one user account can’t be added to use by another account at the same time, unless the camera has been deleted from this user account. Do remember the username which keeps the camera, and the register email.
  2  3. Add camera   After login, now click Add New Camera on the page of my camera in the user control center. In the popup window enter the camera’s ID in the bar Camera ID (This ID No. is a unique identity of the camera which is marked on the label of camera’s back panel or package of the camera), then give the camera your favorite name in the bar Camera Name (allow digits, letters and underline). Click Submit button to finish this step. Finally, the added camera is displayed in the list of My cameras. (Note: The camera can be successfully added when the Status indicator on camera’s back panel stays lit in green.)  4. Plugin installation Please ensure your computer has contained Java and Flash. If not, please download them from relative websites or the Download Software page on this website, and install them.   5. View video In the camera list of My cameras, Sharing with me and the Multi-screen, click an online camera (the camera with green words and play button) and its video will display. The multi-screen enables 4 cameras to display at the same time. (Browser: IE7+, Firefox 5.0+, Chrome 13.0+, Safari 3.2+, 360 official 4.0+ etc.. Don’t use compatible mode while using IE7+.)  6. Playback and Download On the page of a displaying camera, click Playback button to shift to the page of video playback and download. On this page, you can select the time slot when you want to playback and download video.   To use these two functions, please insert a piece of Micro SD card in the card slot of camera to keep the video data. Max 32G Micro SD card is enabled, roughly for a 24hours-by-7days duty cycle recording. Smaller Micro SD card will allow shorter recording.  Clock of recorded video refers to GMT (Greenwich Mean Time).    7. Share Share with friends: On the page of a displaying camera, click Share button. In the dialog box enter the username of the receiver with whom you want to share this camera. Click share to finish. (The username of the receiver is a username registered on this camera system by the receiver.)  8. WiFi configuration On the page of a displaying camera, click Camera Settings to enter interface of WiFi and firmware settings. The system will automatically search for available WiFi and information of the firmware version. When a WiFi list is enabled, please select your WiFi, and enter its password and submit. Then follow the actual prompt to finish the procedure.   The prompt may ask you to unplug Ethernet cable after 15seconds, and then wait for 3-5 minutes for the camera to get online and workable to play. If it fails, please plug in Ethernet cable and reconfigure WiFi again.
  3   9. Delete camera You can delete your camera from your user account. On the page of My cameras list, move the mouse to the top right corner of the camera icon, then click the button X when it appears. You can re-add the camera by the same steps as above if you want it again.  10. Two-way audio Click the talk icon , the camera side can hear your voice after you speak close to the microphone at your computer. Other users who receive your camera by Share function, will only hear the voice from the camera side, and can’t hear your voice at computer.    11. Night vision   The camera will automatically shift to night vision mode on condition of low light, so that you can see clear video when it’s at night. The image will be black & white when this night vision function works.    12. Other functions There are other functions like revoke camera, rename camera, remove shared camera, change password, and retrieve password etc. Please refer to specific operation on more detailed manual.  Part II. Operate NetVue II camera by iPhone, iPad and iPod touch At the beginning, please download MyNetVue APP from App store by your iPhone, iPad or iPod touch, and install it.     1. Start: Click the icon    of this APP and begin to use.   2. Register: On the interface of the APP, click Sign Up to register for your user account. Email address will be used to retrieve password in case it’s lost, please make sure it’s valid and correct. Meanwhile, please write down or remember well your username and password. 3. Login: Enter your username and password and click Login. 4. Add camera: On the page of My camera, click the Add button in the top right corner. Then input camera ID by scanning the QR code of the camera or manually inputting the serial numbers. Give a name to the camera. Click next step and finish.   5. Watch video: Click the camera in My camera list or Friends’ cam, and then click the play button    to watch video. (Note: Only when the camera is online can it be played. The camera is online if its dot icon is in green , offline in red .) 6. WiFi configuration: Please click the settings icon   in the top right corner on the page of playing video, and click Configure WiFi. When the WiFi list is enabled, select your WiFi and enter its password. Then click Confirm to configure.   There will be prompt that appears to instruct you, to unplug Ethernet cable after 15seconds, and then wait for 3-5 minutes for the camera to get online and workable to play. If it fails, please plug in Ethernet cable and reconfigure WiFi again. 7. Delete camera: Scribe a line across the camera in My camera list, click the Delete button that appears, then the camera will be deleted.
  4  8. Two-way audio: Click the talk icon , the camera side can hear your voice after you speak close to the microphone at your iOS devices. Other users who receive your camera by Share function, will only hear the voice from the camera side, and can’t hear your voice at iOS devices.   9. Motion detection and alert: Click the settings icon    in the top right corner on the page of playing video, and you can enable or disable the motion detection and push notification. When the motion detection and push notification are enabled, your mobile device which last activated your mynetvue account will receive alert by push notification immediately when an object passes/enters/exits the area before the camera. After that, if you would like to view the captured image, please login your account, and click the Alarm button    on the page of playing video.   10. Night vision: The camera will automatically shift to night vision mode on condition of low light, so that you can see clear video when it’s at night. The image will be black & white when this night vision function works.   11. Record: When playing the video of a camera, you can click the  button below the video to start recording a video clip (with audio). Click this button again when you want to finish recording. Then you are able to save, upload or share this video clip.   12. Replay: Click this Replay button on the page of playing video, you will be able to review the video(with audio) recorded on Micro SD card you put in the camera. You can select the time slot to start and finish reviewing . 13. Other functions: There are other functions like revoke camera, rename camera, remove shared camera, change password, and retrieve password etc. Please refer to specific operation on more detailed manual.  Part III. Operate NetVue II camera by Android phone and tablet PC At first, please download application software MyNetVue to install on your phone and tablet PC. You can search and find it on Google Play Store, or Download Software/ Mynetvue Android apk at webpage www.mynetvue.com ). 1. Software setup: A ) Find the MyNetVue.apk software you have downloaded on your phone.   B ) Click install button to enter installation interface and automatically install it.   2. Use the software: Click the software icon   and enter the login interface.   3. Register: On the login interface, click Sign Up, and follow the indication to finish. Email address will be used to retrieve password in case it’s lost, please make sure it’s valid and correct. Meanwhile, please write down or remember well your username and password. 4. Add camera: On the My cams interface click Add button in the top right corner. Then input camera ID by scanning the QR code of the camera or manually inputting the serial numbers. Give a name to the camera. Click next step and finish.   5. Watch video: On the interface of My cams or Friend cams, select an online camera from the camera list to enter live streaming video page. Click play button   to see video. (Note: Only when the camera is online can it be played. The camera is online if its dot icon is in green , offline in red .)
  5  6. WiFi configuration: Please click the settings icon   in the top right corner on the page of playing video, and click Configure WiFi. When the WiFi list is enabled, select your WiFi and enter its password. Then click Confirm to configure.   There will be prompt that appears to instruct you, to unplug Ethernet cable after 15seconds, and then wait for 3-5 minutes for the camera to get online and workable to play. If it fails, please plug in Ethernet cable and reconfigure WiFi again. 7. Delete camera: Keep touching the camera in the My Cam list for 3secs, then the prompt appears asking you whether to delete the camera or not. Click Delete to remove the camera. 8. Two-way audio: Click the talk icon , the camera side can hear your voice after you speak close to the microphone at your android devices. Other users who receive your camera by Share function, will only hear the voice from the camera side, and can’t hear your voice at android devices.   9. Motion detection and alert: Click the settings icon    in the top right corner on the page of playing video, and you can enable or disable the motion detection and push notification. When the motion detection and push notification are enabled, your mobile device which last activated your mynetvue account will receive alert by push notification immediately when an object passes/enters/exits the area before the camera. After that, if you would like to view the captured image, please login your account, and click the Alarm button    on the page of playing video.   10. Night vision: The camera will automatically shift to night vision mode on condition of low light, so that you can see clear video when it’s at night. The image will be black & white when this night vision function works.   11. Record: When playing the video of a camera, you can click the  button below the video to start recording a video clip (with audio). Click this button again when you want to finish recording. Then you are able to save, upload or share this video clip.   12. Replay:  Click this Replay button on the page of playing video, you will be able to review the video(with audio) recorded on Micro SD card you put in the camera. You can select the time slot to start and finish reviewing. 13. Other functions: There are other functions like revoke camera, rename camera, remove shared camera, change password, and retrieve password etc. Please refer to specific operation on more detailed manual.
  6   14. FCC STATEMENT  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:    Reorient or relocate the receiving antenna.    Increase the separation between the equipment and receiver.    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.    Consult the dealer or an experienced radio/TV technician for help.   FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Navigation menu