Netgear orporated 11100159 LTE Broadband 11n Wireless Router User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1740161
Application ID	plGDV4VLAZ+fCclyBOUphg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	207.99kB (2599827 bits)
Date Submitted	2012-07-10 00:00:00
Date Available	2012-07-10 00:00:00
Creation Date	2017-10-31 00:25:46
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-31 00:25:46
Document Title	LTE Broadband 11n Wireless Router MBR1515 User Manual
Document Creator	FrameMaker 10.0.2
Document Author:	NETGEAR, Inc.

LTE
Broadband
11n
Mobile
Voice HSPA+
Wireless
Router
Broadband
11n Wireless
MBR1515
Router MVBR1210C
U s e r M anual
350 East Plumeria Drive
San Jose, CA 95134
USA02-10972-01
June 2012
202-10934-01
v1.0
LTE Broadband 11n Wireless Router MBR1515
© 2012 All rights reserved
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means without the written permission of NETGEAR, Inc.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change
without notice. Other brand and product names are registered trademarks or trademarks of their respective
holders. © 2012 All rights reserved.
Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online, or
for more information about the topics covered in this manual, visit the Support website at
http://support.netgear.com
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries): Check the list of phone numbers at
http://support.netgear.com/app/answers/detail/a_id/984
Statement of Conditions
To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes
to the products described in this document without notice. NETGEAR does not assume any liability that may occur
due to the use, or application of, the product(s) or circuit layout(s) described herein.
Table of Contents
Chapter 1 Connecting to the Internet
Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Router Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Router Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Router Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Router Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Log In to Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Access the Configuration Assistant after Installation . . . . . . . . . . . . . . . . . 13
Manually Configure Your Internet Settings. . . . . . . . . . . . . . . . . . . . . . . . . 14
Broadband Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Mobile Broadband Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Ethernet Broadband Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 2 Wireless Network Configuration
Planning Your Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Wireless Placement and Range Guidelines . . . . . . . . . . . . . . . . . . . . . . 25
Wireless Security Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Manually Configure Your Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . 27
Configuring WEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Configuring WPA, WPA2, or WPA + WPA2 . . . . . . . . . . . . . . . . . . . . . . 29
Use Push 'N' Connect (WPS) to Configure Your Wireless Network. . . . . . 30
WPS Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
WPS PIN Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Add Wireless Computers That Do Not Support WPS. . . . . . . . . . . . . . . 32
SIM Card PIN Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SIM Card Modem Unlock Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Chapter 3 Content Filtering
Viewing, Selecting, and Saving Logged Information . . . . . . . . . . . . . . . . . 37
Log Message Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Blocking Sites and Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Blocking Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Scheduling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting Your Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Scheduling Firewall Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Enabling Security Event Email Notification. . . . . . . . . . . . . . . . . . . . . . . . . 44
LTE Broadband 11n Wireless Router MBR1515
Chapter 4 Managing Your Network
Router Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Showing Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Connection Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Viewing Attached Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Backing Up, Restoring, or Erasing Your Settings. . . . . . . . . . . . . . . . . . . . 51
Backing Up the Configuration to a File . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Restoring the Configuration from a File . . . . . . . . . . . . . . . . . . . . . . . . . 51
Erasing the Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Protecting Access to Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Changing the Built-In Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Changing the Administrator Login Time-Out . . . . . . . . . . . . . . . . . . . . . 53
Running Diagnostic Utilities and Rebooting the Router . . . . . . . . . . . . . . . 53
Upgrading the Router Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Chapter 5 Advanced
SIM Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
SMS Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
View SMS Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Send SMS Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Advanced Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Wireless Station Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Restricting Access by MAC Address . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Wireless Repeating Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Port Forwarding and Port Triggering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Port Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Port Triggering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
WAN Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Setting Up a Default DMZ Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
LAN Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
DHCP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Reserved IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
QoS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
QoS Priority Rule List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
QoS Priority Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Dynamic DNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Using Static Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Static Route Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Enabling Remote Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Universal Plug and Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Traffic Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
IPv6 Internet Configuration and Status Check . . . . . . . . . . . . . . . . . . . . . . 81
Chapter 6 Troubleshooting
Basic Functioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Troubleshooting Access to the Router Main Menu . . . . . . . . . . . . . . . . . . 90
LTE Broadband 11n Wireless Router MBR1515
Troubleshooting the ISP Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Connecting to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Troubleshooting Internet Browsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Troubleshooting a TCP/IP Network Using the Ping Utility . . . . . . . . . . . . . 93
Testing the LAN Path to Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Testing the Path from Your Computer to a Remote Device . . . . . . . . . . 94
Problems with Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Restoring the Default Configuration and Password . . . . . . . . . . . . . . . . . . 95
Appendix A Supplemental Information
Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Appendix B Wall-Mounting
Appendix C Compliance Notification
Index
1.
Connecting to the Internet
This chapter describes how to configure your LTE Broadband 11n Wireless Router MBR1515
Internet connection.
•
Hardware Features
•
Log In to Your Router
•
Access the Configuration Assistant after Installation
•
Manually Configure Your Internet Settings
Note: For help with installation, see the LTE Broadband 11n Wireless
Router MBR1515 Installation Guide.
Note: For more information on the topics that are covered in this manual,
visit the support website at support.netgear.com.
LTE Broadband 11n Wireless Router MBR1515
Hardware Features
This section outlines the physical aspects of your LTE Broadband 11n Wireless Router.
Router Stand
Since the LTE Broadband 11n Wireless Router is a vertical-only device, use the stand to
position your router upright.
1. Insert the tabs on the stand into the slot on the bottom of your router.
2. Place your router near an AC power outlet in a location where you can connect the cables
you need for your home network.
The router must also be located where you can receive a strong mobile broadband signal
while indoors if you are planning to connect to the Internet using mobile broadband.
ld
eh
pla
Connecting to the Internet
LTE Broadband 11n Wireless Router MBR1515
Router Front Panel
The router front panel contains control buttons and status LEDs. Use the LEDs to verify
status and connections.
WPS
Mobile Broadband/Wi-Fi On/Off
Power
Internet
Wi-Fi
LAN
Ethernet WAN
2G/3G
Signal Quality
ld
Table 1 describes each LED and button located on the front panel of the router.
Table 1. LED Descriptions
LED
Activity
Description
WPS
Press the WPS button to open a 2-minute window for the router to connect with other
WPS-enabled devices. For more information about this function, see Use Push 'N' Connect
(WPS) to Configure Your Wireless Network on page 30.
Wi-Fi
This button can be used to control the WiFi radio or both the WiFi radio and mobile broadband
radio. Use the router interface to select the options. The default is set for Wi-Fi radio only.
Connecting to the Internet
LTE Broadband 11n Wireless Router MBR1515
Table 1. LED Descriptions
LED
Activity
Description
Power
Solid green
The router is turned on and operating normally.
Solid amber
POST (power-on self-test) in progress.
Off
Power is not supplied to the router.
Solid green
There is an Internet session.
Solid amber
Traffic meter limit has been reached, traffic is blocked.
Blinking green
Data is being transmitted over the Internet connection.
Blinking amber
Traffic meter limit has been reached, but traffic not blocked.
Internet Port
Blinking green and amber Failover from WAN to Mobile Broadband.
Wi-Fi
LAN Ports
WAN Port
2G/3G
Signal Quality
Off
No Internet connection detected.
Solid blue
The Wi-Fi local port is initialized.
Blinking blue
Data is being transmitted or received over the Wi-Fi link.
Off
The wireless access point is turned off.
Solid green
The local Ethernet ports have detected wired links with PCs.
Blinking
Data is being transmitted or received.
Off
No link is detected on these ports.
Solid green
The Ethernet WAN port has detected an active link.
Blinking
Data is being transmitted or received.
Off
No link is detected on these ports.
Solid blue
Indicates the router is in 3G+ coverage.
Solid green
Indicates the router is in 2G coverage.
Off
No coverage is detected.
Solid blue
Excellent coverage detected.
Solid green
Good coverage detected.
Solid amber
Marginal coverage detected.
Off
No coverage detected.
Restore Factory Locate the small hole outlined in red on the back of the router. Insert a paperclip into the hole
Settings
and push for 6 seconds. Depressing the reset button causes the LED to blink briefly. After the
button is held down for more than 6 seconds, the LED will flash AMBER, and then turn green
as the router resets to the factory defaults. See
Connecting to the Internet
LTE Broadband 11n Wireless Router MBR1515
Router Back Panel
The back panel of the router contains port connections.
Connector for required external antenna
ld
WAN port
Ethernet LAN ports
Slot for SIM card (if required by ISP)
Power On/Off button
Power adapter input
Router Label
The label on the left side of the router shows the router’s MAC address, serial number,
security PIN, IMEI or ESN number, and factory default login information. It also contains the
SSID and passphrase that is unique to each router.
Direction of SIM card insertion
ld
Restore
Factory
Settings:
Press for
6 seconds.
Router label
with unique
SSID and
passphrase
Router information
- Default access address
- Default user name and password
- Security PIN
- IMEI or ESN number
- Serial number
- MAC address
Connecting to the Internet
10
LTE Broadband 11n Wireless Router MBR1515
Log In to Your Router
When you first connect to your router during installation, a Setup Wizard displays. For help
using the Setup Wizard to configure your Internet and wireless network, see the LTE
Broadband 11n Wireless Router MBR1515 Installation Guide.
After the initial configuration, you can use your Web browser to log in to the router to view or
change its settings. Links to Knowledge Base and documentation are also available on the
router main menu.
Note: Your computer must be configured for DHCP. For help configuring
DHCP, refer to the documentation that came with your computer.
When you have logged in, if you do not click Logout, after 5 minutes of no activity the router
automatically logs you out.
¾
To log in to the router:
1. Type http://www.routerlogin.net in the address field of your browser, and then press
enter to display the login window.
2. Enter admin for the user name and your password (or the default, password).
For information about how to change the password, see Changing the Built-In Password
on page 52.
Note: If you do not remember your password, you can restore the router to
its factory default settings, which will reset the password. See
Factory Default Settings on page 97.
3. If the router has not been configured, the Smart Wizard screen displays. After the router has
been configured, one of the following screens appears:
Connecting to the Internet
11
LTE Broadband 11n Wireless Router MBR1515
•
Firmware Upgrade Assistant screen. After initial setup, the Firmware Upgrade
Assistant screen displays unless the Check for Updated Firmware Upon Log-in
check box is cleared.
Note: You can disable this automatic checking and updating feature during
future log ins by clearing the Check for Updated Firmware Upon
Log-in check box, but NETGEAR recommends that you keep this
feature enabled to ensure your router is using the latest updated
firmware.
•
Router Status screen. The Router Status screen displays the current router
connection status. See Router Status on page 46.
4. You can use different methods to configure your router.
• Select Setup Wizard from the router menu to set up your Internet connection and
wireless network configuration. See Access the Configuration Assistant after
Installation on page 13.
•
You can manually configure the router settings. See Manually Configure Your Internet
Settings on page 14.
Connecting to the Internet
12
LTE Broadband 11n Wireless Router MBR1515
Access the Configuration Assistant after Installation
1. Log in to the router as described in Log In to Your Router on page 11.
The Configuration Assistant opens.
2. Click Next.
The Configuration Assistant prompts you to set up your Internet connection and wireless
network as described in the LTE Broadband 11n Wireless Router MBR1515 Installation
Guide.
a. Select your Internet connection mode:
• Use Ethernet first and if fail use mobile broadband connection
•
Always use mobile broadband connection
•
Always use Ethernet connection
b. Click Next.
c. Select your country and then your Internet Service Provider.
d. Click Done.
Connecting to the Internet
13
LTE Broadband 11n Wireless Router MBR1515
Manually Configure Your Internet Settings
For you to connect to the network, an active broadband service account is required. Contact
your ISP for your user name, password, and the network name. You must also configure
some or all of the settings described in the following sections, depending on how you have
chosen to connect to the Internet:
•
Broadband Settings on page 14.
•
Mobile Broadband Settings on page 16 (not required if using Ethernet connection only).
•
Ethernet Broadband Settings on page 18 (not required if using mobile broadband
connection only).
Broadband Settings
¾
To manually configure your broadband Internet settings:
1. Log in to the router as described in Log In to Your Router on page 11.
2. From the main menu, select Broadband Settings.
3. Adjust the settings as needed based on your Internet connection. The fields in this screen
are described in Table 2.
Connecting to the Internet
14
LTE Broadband 11n Wireless Router MBR1515
4. The following buttons are available:
• Apply. Apply the changes that you made.
•
Cancel. Discard changes.
Table 2. Internet Connection Settings
Fields and Check Boxes
Description
Internet Connection Mode
The choices are:
• Always use an Ethernet connection (default)
• Use Ethernet first and if it fails use mobile broadband connection
• Always use mobile broadband connection
Failover Detection Method1
Select the failover method and enter the related information:
• DNS lookup using WAN DNS Server
• Perform a DNS lookup by a hostname
• Ping this IP address
Retry Interval is1
Enter the retry interval.
Failover after1
Enter how many retry attempts to make before failing over.
Resume after1
Enter how long to wait for primary link is stabilized before resuming to
use the primary link.
Enable Hardware link detection
Enter when to failover when the Ethernet link is dropped. This is
independent of the DNS / Ping detection methods.
1. This field is available only when the Internet Connection Mode is Use Ethernet first and if fail use 3G
mobile connection.
Connecting to the Internet
15
LTE Broadband 11n Wireless Router MBR1515
Mobile Broadband Settings
¾
To manually configure your mobile broadband Internet settings:
1. Log in to the router as described in Log In to Your Router on page 11.
2. From the main menu, select Mobile Broadband Settings.
3. Adjust the settings as needed based on your Internet connection. The fields in this screen
are described in Table 3.
4. Available buttons are:
• Connect. Manually connect to the network.
•
Disconnect. Disconnect from the current network.
•
Apply. Apply the changes that you made.
•
Cancel. Discard changes.
•
Refresh. Update the connection status
Connecting to the Internet
16
LTE Broadband 11n Wireless Router MBR1515
Table 3. Settings
Fields and Check Boxes
Description
User Name
Internet account login user name.
Password
Internet account password for authentication.
Country
Select your country from the drop-down list.
Internet Service Provider
Select your Internet Service Provider from the drop-down list.
Access Number
The remote site's phone number.
PIN code
Pin code of the SIM card, where applicable.
APN
Access point name.
PDP type
Select the type of packet data protocol:
• IP
• PDP-IP
• PPP
• PPP-IP
Connect automatically at startup
When this check box is selected, the modem automatically connects
to the network when powered up. This should be selected after login
information is provided.
Reconnect automatically when
connection is lost
When this check box is selected, the modem will attempt to
reconnect to the network when the connection is lost. Under normal
situations, this setting should be selected.
Roaming automatically
When this check box is checked, the unit might roam to any available
operator in range and might incur roaming charges.
Use internal antenna
If this check box is selected, the router will use the internal antenna
rather than the external antenna.
Wireless Button Configuration
Select the option to determine the behavior of the WPS push button
on the front panel when pressed.
• Control Wi-Fi Only: Pressing the push button toggles the Wi-Fi
function. If Wi-Fi is turned on, pressing the push button turns off
the Wi-Fi. Pressing it again will turn on the Wi-Fi. This function is
available only if the Wi-Fi function is enabled. The Wireless
Broadband function is unaffected.
• Control Both Wi-Fi and Wireless Broadband: Pressing the
push button toggles both the Wi-Fi function and wireless
broadband at the same time. If Wi-Fi is turned on, pressing the
push button turns off the Wi-Fi. At the same time, the wireless
broadband connection is disconnected. If you press the push
button again, Wi-Fi is turned on and the router attempts to
re-establish the wireless broadband connection. Depending on
the coverage, wireless broadband coverage might or might not
be connected successfully.
Connection status
Current WAN port status.
Connecting to the Internet
17
LTE Broadband 11n Wireless Router MBR1515
Ethernet Broadband Settings
¾
To manually configure your Ethernet Broadband Internet settings:
1. Log in to the router as described in Log In to Your Router on page 11.
2. From the main menu, select Ethernet Broadband Settings.
The following question displays at the top of the screen:
Select the option based on the type of account you have with your ISP.
•
If you need to enter login information every time you connect to the Internet, or you
have a PPPoE account with your ISP, select Yes.
•
Otherwise, select No.
Then fill out the appropriate screen.
For details, see:
step a, Login required on page 18
or
step b, Login not required on page 20.
Note: If you have installed PPP software such as WinPoET (from
Earthlink) or Enternet (from PacBell), then you have PPPoE. Select
Yes. After selecting Yes and configuring your router, you do not
need to run the PPP software on your PC to connect to the Internet.
a. Login required
Adjust the settings as needed based on your Internet connection. The fields in this
screen are described in Table 4.
Connecting to the Internet
18
LTE Broadband 11n Wireless Router MBR1515
Table 4. Ethernet Broadband Settings When Login Required
Fields and Checkboxes
Description
Internet Service Provider
Select the service provided by your ISP.
• Other (PPPoE) is the most common.
• PPTP is used in Austria and other European countries.
• Telstra BigPond is for Australia only.
Login
This is usually the name that you use in your email address. For example,
if your main mail account is JerAB@ISP.com, then put JerAB in this field.
Some ISPs (such as Mindspring, Earthlink, and T-DSL) require that you
use your full email address when you log in. If your ISP requires your full
email address, then type it in the Login field.
Password
Type the password that you use to log in to your ISP.
Service Name (If Required) If your ISP provided a service name, enter it here. Otherwise, this can be
left blank.
Connecting to the Internet
19
LTE Broadband 11n Wireless Router MBR1515
Table 4. Ethernet Broadband Settings When Login Required
Fields and Checkboxes
Description
Connection Mode
Set the connection mode to Dial on Demand, Always On, or Manually
Connect.
• With the default setting, Dial on Demand, a PPPoE connection
automatically starts when there is outbound traffic to the Internet, and
it automatically terminates if the connection is idle based on the value
in the Idle Timeout field.
• When the connection mode is set to Always On, the PPPoE
connection automatically starts when the computer boots up, but the
connection does not time out. The router will keep trying to bring up
the connection if it is disconnected for some reason.
• If you select Manually Connect, you must go to the Router Status
screen and click the Connect button to connect to the Internet. The
manual connection does not time out, and you have to click the
Disconnect button on the Router Status screen to disconnect it.
Idle Timeout (In Minutes)
An idle Internet connection will be terminated after this time period. If this
value is zero (0), then the router will keep the connection alive by
reconnecting immediately whenever the connection is lost.
Internet IP Address
If you log in to your service or your ISP did not provide you with a fixed IP
address, the router finds an IP address for you automatically when you
connect. Select Get Dynamically from ISP.
If you have a fixed (static, permanent) IP address, your ISP has provided
you with an IP address. Select Use Static IP Address and type in the IP
address.
Domain Name Server
(DNS) Address
The DNS server is used to look up site addresses based on their names.
• If your ISP gave you one or two DNS addresses, select Use These
DNS Servers and type the primary and secondary addresses.
• Otherwise, select Get Automatically From ISP.
Note: If you get “Address not found” errors when you go to a website, it is
likely that your DNS servers are not set up correctly. You should contact
your ISP to get DNS server addresses.
b. Login not required
Adjust the settings as needed based on your Internet connection. The fields in this
screen are described in Table 5.
Connecting to the Internet
20
LTE Broadband 11n Wireless Router MBR1515
MBR1515
Connecting to the Internet
21
LTE Broadband 11n Wireless Router MBR1515
Table 5. Ethernet Broadband Settings Fields When Login Not Required
Fields and Check Boxes
Description
Account Name (If Required)
This is also known as the host name or system name.
For most users, type your account name or user name in this field. For
example, if your main mail account is JerAB@ISP.com, then put JerAB
in this field.
If your ISP has given you a specific host name, then type it (for
example, CCA7324-A).
Domain Name (If Required)
For most users, you can leave this field blank, unless required by your
ISP. You can type the domain name of your ISP. For example, if your
ISP's mail server is mail.xxx.yyy.zzz, you would type xxx.yyy.zzz as the
domain name.
If you have a domain name given to you by your ISP, type it in this field.
(For example, Earthlink Cable might require a host name of home, and
Comcast sometimes supplies a domain name.)
If you have a cable modem, this is usually the workgroup name.
Internet IP Address
If you log in to your service or your ISP did not provide you with a fixed
IP address, the router finds an IP address for you automatically when
you connect. Select Get Dynamically From ISP.
If you have a fixed (or static IP) address, your ISP has provided you
with the required information. Select Use Static IP Address and type
the IP address, subnet mask and gateway IP address into the correct
fields.
For example:
• IP Address. 24.218.156.183
• Subnet Mask. 255.255.255.0
• Gateway IP Address. 24.218.156.1
Domain Name Server (DNS)
Address
The DNS server is used to look up site addresses based on their
names.
• If your ISP gave you one or two DNS addresses, select Use These
DNS Servers and type the primary and secondary addresses.
• Otherwise, select Get Automatically From ISP.
Note: If you get “Address not found” errors when you go to a website, it
is likely that your DNS servers are not set up correctly. You should
contact your ISP to get DNS server addresses.
Router MAC Address
Your computer's local address is its unique address on your network.
This is also referred to as the computer's MAC (Media Access Control)
address.
• Usually, select Use Default MAC Address.
• If your ISP requires MAC authentication, then select either Use
Computer MAC Address to disguise the router's MAC address
with the computer's own MAC address, or Use This MAC Address
to manually type the MAC address for a different computer.
The format for the MAC address is XX:XX:XX:XX:XX:XX. This value
might be changed if Use Computer MAC Address is selected once a
value has already been set in the Use This MAC Address selection.
Connecting to the Internet
22
LTE Broadband 11n Wireless Router MBR1515
3. The following buttons are available:
• Apply. Apply the changes that you made.
•
Cancel. Discard changes.
•
Test. Connect to the NETGEAR website. If you connect successfully, your settings
work, and you can click Logout to exit these screens.
Connecting to the Internet
23
2.
Wireless Network Configuration
For a wireless connection, the SSID, (also known as the wireless network name), and the
wireless security settings must be the same for the router and wireless computers or wireless
adapters. NETGEAR strongly recommends that you use wireless security.
The router is pre-configured with WPA-PSK/WPA2-PSK mixed mode and uses a unique SSID
and passphrase. This information is printed on the label on the bottom of the router. Use this
information to setup your WiFi computer and devices.
This chapter addresses the following:
•
Planning Your Wireless Network
•
Manually Configure Your Wireless Settings
•
Use Push 'N' Connect (WPS) to Configure Your Wireless Network
Note: Computers can connect wirelessly at a range of several hundred
feet. If you do not use wireless security, this can allow others outside
your immediate area to access your network.
24
LTE Broadband 11n Wireless Router MBR1515
Planning Your Wireless Network
For compliance and compatibility between similar products in your area, the operating
channel and region must be set correctly.
To configure the wireless network, you can either specify the wireless settings, or you can
use Wi-Fi Protected Setup (WPS) to automatically set the SSID and implement WPA/WPA2
security.
•
To manually configure the wireless settings, you must know the following:
SSID. The default SSID for the router is NETGEAR-3G.
The wireless mode (802.11n, 802.11g, or 802.11b) that each wireless adapter
supports.
Wireless security option. To successfully implement wireless security, check each
wireless adapter to determine which wireless security option it supports.
See Manually Configure Your Wireless Settings on page 27.
•
Push 'N' Connect (WPS) implements WPA/WPA2 wireless security on the router and your
wireless computer or device at the same time. The wireless computer or device must be
compatible with WPS.
See Use Push 'N' Connect (WPS) to Configure Your Wireless Network on page 30.
Wireless Placement and Range Guidelines
The range of your wireless connection can vary significantly based on the physical placement
of the router. The latency, data throughput performance, and notebook power consumption of
wireless adapters also vary depending on your configuration choices.
For best results, place your router according to the following guidelines:
•
Near the center of the area in which your computers will operate.
•
In an elevated location, such as a high shelf, where the wirelessly connected computers
have line-of-sight access (even if through walls).
•
Away from sources of interference, such as microwave ovens, and 2.4 GHz cordless
phones (see Interference Reduction Table on page 105).
•
Away from large metal surfaces.
•
Put the antenna in a vertical position to provide the best side-to-side coverage. Put the
antenna in a horizontal position to provide the best up-and-down coverage.
•
If using multiple access points, it is better if adjacent access points use different radio
frequency channels to reduce interference. The recommended channel spacing between
adjacent access points is 5 channels (for example, use Channels 1 and 6, or 6 and 11).
The time it takes to establish a wireless connection can vary depending on both your security
settings and placement. WEP connections can take slightly longer to establish. Also, WEP
encryption can consume more battery power on a notebook computer.
Wireless Network Configuration
25
LTE Broadband 11n Wireless Router MBR1515
Wireless Security Options
Indoors, computers can connect over 802.11n wireless networks at a maximum range of up
to 300 feet. Such distances can allow others outside your immediate area to access your
network.
Unlike wired network data, your wireless data transmissions can extend beyond your walls
and can be received by anyone with a compatible adapter. For this reason, use the security
features of your wireless equipment. The LTE Broadband 11n Wireless Router provides
highly effective security features, which are covered in detail in this chapter. Deploy the
security features appropriate to your needs.
Each router is preconfigured for WPA-PSK/WPA2-PSK mixed-mode, and comes with a
unique SSID and passphrase for each router.
There are several ways you can enhance the security of your wireless network:
ld
MBR1515
•
Restrict access based on MAC address. You can allow only trusted PCs to connect so
that unknown PCs cannot wirelessly connect to the router. Restricting access by MAC
address adds an obstacle against unwanted access to your network, but the data
broadcast over the wireless link is fully exposed.
•
Turn off the broadcast of the wireless network name (SSID). If you disable broadcast
of the SSID, only devices that have the correct SSID can connect. This nullifies wireless
network “discovery” feature of some products, such as Windows XP, but the data is still
exposed.
•
WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP
Shared Key authentication and WEP data encryption block all but the most determined
eavesdropper. This data encryption mode has been superseded by WPA-PSK and
WPA2-PSK.
•
WPA-PSK (TKIP), WPA2-PSK (AES). Wi-Fi Protected Access (WPA) using a pre-shared
key to perform authentication and generate the initial data encryption keys. The very
strong authentication along with dynamic per frame re-keying of WPA makes it virtually
impossible to compromise.
Wireless Network Configuration
26
LTE Broadband 11n Wireless Router MBR1515
Manually Configure Your Wireless Settings
Note: If you use a wireless computer to change the wireless network name
(SSID) or wireless security, you will be disconnected when you click
Apply. To avoid this occurrence, connect your computer directly to
the router with an Ethernet cable while you are making changes.
¾
To view or manually configure the wireless settings:
1. Log in to the router as described in Log In to Your Router on page 11.
2. Select Wireless Settings from the main menu.
The settings for this screen are explained in
the table below.
3. Select the region in which the router will
operate.
4. For initial configuration and test, leave the other
settings unchanged.
5. To save your changes, click Apply.
6. Configure and test your computers for wireless
connectivity.
Set up your wireless computers with the
same SSID and wireless security settings as your router. Check that they have a wireless
link and are able to obtain an IP address by DHCP from the router. If there is interference,
adjust the channel.
Settings
Wireless
Network
Description
Name (SSID)
The SSID is also known as the wireless network name. Enter a
32-character (maximum) name in this field. This field is
case-sensitive.
When there is more than one wireless network, SSIDs provide a
means for separating the traffic. To join a network, a wireless
computer or device must use the SSID.
Region
The location where the router is used.
Channel
The wireless channel used by the gateway. The default is Auto.
Do not change the channel unless you experience interference
(shown by lost connections or slow data transfers). If this happens,
you might need to try different channels to see which works best.
Mode
The default is Up to 145 Mbps.
Wireless Network Configuration
27
LTE Broadband 11n Wireless Router MBR1515
Settings
Security Options
Description
None
Use this setting to establish wireless connectivity before
implementing wireless security. NETGEAR strongly recommends that
you implement wireless security.
WEP
Use encryption keys and data encryption for data security. You can
select 64-bit or 128-bit encryption. See Configuring WEP on page 28.
WPA-PSK (TKIP)
Allow only computers configured with WPA to connect to the router.
See Configuring WPA, WPA2, or WPA + WPA2 on page 29.
WPA2-PSK (AES)
Allow only computers configured with WPA2 to connect to the router.
See Configuring WPA, WPA2, or WPA + WPA2 on page 29.
WPA-PSK (TKIP) +
WPA2-PSK (AES)
Allow computers configured with either WPA-PSK or WPA2-PSK
security to connect to the router. See Configuring WPA, WPA2, or
WPA + WPA2 on page 29.
Configuring WEP
Note: If you use a wireless computer to configure wireless security
settings, you will be disconnected when you click Apply.
Reconfigure your wireless computer to match the new settings, or
access the router from a wired computer to make further changes.
¾
To configure WEP data encryption:
1. Log in to the router as described in Log In to Your Router on page 11.
2. From the main menu, select Wireless Settings to display the Wireless Settings screen.
3. In the Security Options section, select the WEP
(Wired Equivalent Privacy) radio button:
4. Select the Authentication Type setting:
Automatic, Open System, or Shared Key. The
default is Open System.
Note: The authentication is separate from the
data encryption. You can select authentication
that requires a shared key, but still leaves data
transmissions unencrypted. Security is stronger
if you use both the Shared Key and WEP
encryption settings.
5. Select the Encryption Strength setting:
• 64-bit. Enter 10 hexadecimal digits (any
combination of 0–9, a–f, or A–F).
Wireless Network Configuration
28
LTE Broadband 11n Wireless Router MBR1515
•
128-bit. Enter 26 hexadecimal digits (any combination of 0–9, a–f, or A–F).
6. Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and access points in your
network:
• Passphrase. To use a passphrase to generate the keys, enter a passphrase, and
click Generate. This automatically creates the keys. Wireless stations must use the
passphrase or keys to access the router.
Note: Not all wireless adapters support passphrase key generation.
•
Key 1–Key4. These values are not case-sensitive. You can manually enter the four
data encryption keys. These values must be identical on all computers and access
points in your network. Enter 10 hexadecimal digits (any combination of 0–9, a–f, or
A–F).
7. Select which of the four keys will be the default.
Data transmissions are always encrypted using the default key. The other keys can be
used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA
authentication is selected.
8. Click Apply to save your settings.
Configuring WPA, WPA2, or WPA + WPA2
Both WPA and WPA2 provide strong data security. WPA with TKIP is a software
implementation that can be used on Windows systems with Service Pack 2 or later; WPA2
with AES is a hardware implementation; see your device documentation before implementing
it. Consult the product documentation for your wireless adapter for instructions for configuring
WPA settings.
Note: If you use a wireless computer to configure wireless security
settings, you will be disconnected when you click Apply. If this
happens, reconfigure your wireless computer to match the new
settings, or access the router from a wired computer to make further
changes.
¾
To configure WPA or WPA2 in the router:
1. Log in to the router as described in Log In to Your Router on page 11.
2. Select Wireless Settings from the main menu.
Wireless Network Configuration
29
LTE Broadband 11n Wireless Router MBR1515
3. On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your
choice.
4. For WPA-PSK or WPA2-PSK, enter the passphrase.
5. To save your settings, click Apply.
Use Push 'N' Connect (WPS) to Configure Your Wireless
Network
To use Push 'N' Connect, your wireless computers or devices must support Wi-Fi Protected
Setup (WPS). Compatible equipment usually has the
WPS symbol on it. WPS can
configure the network name (SSID) and set up WPA/WPA2 wireless security for the router
and the wireless computer or device at the same time.
WPS considerations:
•
NETGEAR’s Push 'N' Connect feature is based on the WPS standard. All other
Wi-Fi-certified and WPS-capable products should be compatible with NETGEAR products
that implement Push 'N' Connect.
•
If your wireless network will include a combination of WPS-capable devices and
non-WPS-capable devices, NETGEAR suggests that you set up your wireless network
and security settings manually first, and use WPS only for adding WPS-capable devices.
WPS Button
Any wireless computer or wireless adapter that will connect to the router wirelessly is a client.
The client must support a WPS button, and must have a WPS configuration utility, such as
the NETGEAR Smart Wizard or Atheros Jumpstart.
¾
To use the router WPS button to add a WPS client:
1. Log in to the router as described in Log In to Your Router on page 11.
Wireless Network Configuration
30
LTE Broadband 11n Wireless Router MBR1515
2. On the router main menu, select Add
WPS Client, and then click Next.
By default, the Push Button
(recommended) radio button is
selected.
WPS
button
3. Either click the onscreen button or
press the WPS button on the front of
the router.
The router tries to communicate with the client (the computer that wants to join the
network) for 2 minutes.
4. Go to the client wireless computer, and run a WPS configuration utility. Follow the utility’s
instructions to click a WPS button.
5. Go back to the router screen to check for a message.
The router WPS screen displays a message
confirming that the client was added to the
wireless network. The router generates an
SSID, and implements WPA/WPA2 wireless
security. The router will keep these wireless
settings unless you change them, or you
clear the Keep Existing Wireless Settings
check box in the Advanced Wireless
Settings/WPS Settings screen.
6. Note the new SSID and WPA/WPA2
password for the wireless network. You can
view these settings in the Wireless Settings
screen. See Manually Configure Your
Wireless Settings on page 27.
To access the Internet from any computer connected to your router, launch a browser such
as Microsoft Internet Explorer or Mozilla Firefox. You should see the router’s Internet LED
blink, indicating communication to the ISP.
Note: If no WPS-capable client devices are located during the 2-minute
time frame, the SSID does not change, and no security is set up.
WPS PIN Entry
Any wireless computer or device that will connect to the router wirelessly is a client. The
client must support a WPS PIN, and must have a WPS configuration utility, such as the
NETGEAR Smart Wizard or Atheros Jumpstart.
The first time you add a WPS client, make sure that the Keep Existing Wireless Settings
check box on the WPS Settings screen is cleared. This is the default setting for the router,
and allows it to generate the SSID and WPA/WPA2 security settings when it implements
Wireless Network Configuration
31
LTE Broadband 11n Wireless Router MBR1515
WPS. After WPS is implemented, the router automatically selects this check box so that your
SSID and wireless security settings stay the same if other WPS devices are added later.
¾
To use a PIN to add a WPS client:
1. Log in to the router as described in Log In to Your Router on page 11.
2. On the router main menu, select Add WPS
Client (computers that will connect wirelessly to
the router are clients), and then click Next. The
Add WPS Client screen displays.
3. Select the PIN Number radio button.
4. Go to the client wireless computer. Run a WPS
configuration utility. Follow the utility’s
instructions to generate a PIN. Take note of the
client PIN.
5. In the router Add WPS Client screen, enter the client PIN number, and then click Next.
• The router tries to communicate with the client for 4 minutes. If no WPS clients
connect during this time, the router wireless settings do not change.
•
The router WPS screen confirms that the client was added to the wireless network.
The router generates an SSID, and implements WPA/WPA2 wireless security.
6. Note the new SSID and WPA/WPA2 password for the wireless network. You can view these
settings in the Wireless Settings screen. See Manually Configure Your Wireless Settings on
page 27.
To access the Internet from any computer connected to your router, launch an Internet
browser such as Mozilla Firefox. You should see the router’s Internet LED blink.
Add Wireless Computers That Do Not Support WPS
If you set up your network with WPS, and now you want to add a computer that does not
support WPS, you must manually configure that computer. For information about how to view
the wireless settings for the router, see Manually Configure Your Wireless Settings on
page 27.
Because WPA randomly creates the SSID and WPA/WPA2 keys, they might be difficult to
type or remember (that is one reason why the network is so secure). You can change the
wireless settings so that they are easier for you to remember. If you do that, then you will
need to set up the WPS-compatible computers again.
Note: Making these changes will cause all wireless computers to be
disconnected from network. You will then have to set them up with
the new wireless settings.
Wireless Network Configuration
32
LTE Broadband 11n Wireless Router MBR1515
¾
To change wireless settings for the network:
1. Use an Ethernet cable to connect a computer to the router. That way you will not get
disconnected when you change the wireless settings.
2. Log in to the router and select Wireless Settings (see Manually Configure Your Wireless
Settings on page 27).
3. Make the following changes:
• Change the wireless network name (SSID) to a meaningful name.
•
On the WPA/PSK + WPA2/PSK screen, select a passphrase.
•
Make sure that the Keep Wireless Settings check box is selected in the WPS
Settings screen so that your new settings will not be erased if you use WPS.
4. Click Apply so that your changes take effect. Write down your settings.
All existing wireless clients are disassociated and disconnected from the router.
5. For the non-WPS devices that you want to connect, open the networking utility and follow
the utility’s instructions to enter the security settings that you selected in Step 3 (the SSID,
WPA/PSK + WPA2/PSK security method, and passphrase).
6. For the WPS devices that you want to connect, follow the procedure WPS Button on
page 30 or WPS PIN Entry on page 31.
The settings that you configured in Step 3 are broadcast to the WPS devices so that they
can connect to the router.
SIM Card PIN Code
Some SIM cards may have a PIN code associated with them. Without the PIN code, you will
not be able to access the internet. This status appears when a PIN is required, but has not
yet been entered.
¾
To enter the PIN code:
1. Log into the router and select Mobile Broadband Settings from the navigation tab.
2. Enter the PIN Code.
Wireless Network Configuration
33
LTE Broadband 11n Wireless Router MBR1515
Check with the router company if you do not know the PIN code.
PIN Code
SIM Card Modem Unlock Code
If you have a SIM card that is not provided by the company where you got the router, you
might get an error indicating the modem is locked. To proceed, you must enter an unlock
code.
¾
To enter the modem unlock code:
1. Log into the router and select Mobile Broadband Settings from the navigation tab.
2. Enter the Modem Unlock Code.
Wireless Network Configuration
34
LTE Broadband 11n Wireless Router MBR1515
The modem unlock code can be obtained from the company that supplied the router.
Modem
Unlock
Code
Wireless Network Configuration
35
3.
Content Filtering
This chapter describes how to use the basic firewall features of the router to protect your
network.
•
Viewing, Selecting, and Saving Logged Information
•
Blocking Sites and Keywords
•
Blocking Services
•
Scheduling
•
Enabling Security Event Email Notification
Note: For information about the advanced content filtering features port
forwarding and port triggering, see Port Forwarding and Port
Triggering on page 64.
36
LTE Broadband 11n Wireless Router MBR1515
Viewing, Selecting, and Saving Logged Information
The router logs security-related events such as denied incoming service requests, hacker
probes, and administrator logins. If you enabled content filtering in the Block Sites screen,
the Logs screen can show you when someone on your network tries to access a blocked site.
On the main menu, under Content Filtering, select Logs to display this screen:
Note: You can enable email notification to receive these logs in an email
message. See Enabling Security Event Email Notification on
page 44.
Content Filtering
37
LTE Broadband 11n Wireless Router MBR1515
Log entries and action buttons are described in the following table.
Field or Button
Description
Current time
The date and time the log entry was recorded.
Description or action
The type of event and what action was taken, if any.
Source IP
The IP address of the initiating device for this log entry.
Source port and interface
The service port number of the initiating device, and whether it
originated from the LAN or WAN.
Destination
The name or IP address of the destination device or website.
Destination port and interface
The service port number of the destination device, and whether it is
on the LAN or WAN.
Refresh button
Refresh the log screen.
Clear Log button
Clear the log entries.
Send Log button
Email the log immediately.
Apply button
Apply the current settings.
Cancel button
Clear the current settings.
Selecting Which Information to Log
Besides the standard information listed previously, you can choose to log additional
information. Those optional selections are as follows:
•
Attempted access to blocked site
•
Connections to the router menu
•
Router operation (start up, get time, and so on)
•
Known DoS attacks and port scans
Saving Log Files on a Server
You can choose to write the logs to a computer running a syslog program. To activate this
feature, select to the Broadcast on LAN radio button, or enter the IP address of the server
where the syslog file will be written.
Content Filtering
38
LTE Broadband 11n Wireless Router MBR1515
Log Message Examples
Following are examples of log messages. In all cases, the log entry shows the time stamp as
Day, Year-Month-Date Hour:Minute:Second.
Activation and Administration
This entry indicates a power-up or reboot with initial time entry.
Tue, 2002-05-21 18:48:39 - NETGEAR activated
This entry shows an administrator logging in to and out from IP address 192.168.0.2.
Tue, 2002-05-21 18:55:00 - Administrator login successful - IP:192.168.0.2
Thu, 2002-05-21 18:56:58 - Administrator logout - IP:192.168.0.2
This entry shows a time-out of the administrator login.
Tue, 2002-05-21 19:00:06 - Login screen timed out - IP:192.168.0.2
This entry shows when the log was emailed.
Wed, 2002-05-22 22:00:19 - Log emailed
Dropped Packets
These entries show an inbound FTP (port 21) packet, User Datagram Protocol (UDP) packet
(port 6970), and Internet Control Message Protocol (ICMP) packet (port 0) being dropped as
a result of the default inbound rule, which states that all inbound packets are denied.
Wed, 2002-05-22 07:15:15 - TCP packet dropped - Source:64.12.47.28,4787,WAN
- Destination:134.177.0.11,21,LAN - [Inbound Default rule match]
Sun, 2002-05-22 12:50:33 - UDP packet dropped - Source:64.12.47.28,10714,WAN
- Destination:134.177.0.11,6970,LAN - [Inbound Default rule match]
Sun, 2002-05-22 21:02:53 - ICMP packet dropped - Source:64.12.47.28,0,WAN Destination:134.177.0.11,0,LAN - [Inbound Default rule match]
Content Filtering
39
LTE Broadband 11n Wireless Router MBR1515
Blocking Sites and Keywords
The router provides a variety of options for blocking Internet-based content and
communications services. With its content filtering feature, the router prevents objectionable
content from reaching your PCs. You can control access to Internet content by screening for
keywords within Web addresses. Content filtering options include:
•
Keyword blocking of HTTP traffic.
•
Outbound service blocking. Limits access from your LAN to Internet locations or services
that you specify as off-limits.
•
Denial of service (DoS) protection. Detects and thwarts DoS attacks such as Ping of
Death, SYN flood, LAND attack, and IP spoofing.
•
Blocking unwanted traffic from the Internet to your LAN.
The router allows you to restrict access to Internet content based on Web addresses and
Web address keywords.
1. Log in to the router as described in Log In to Your Router on page 11.
2. On the main menu, select Block Sites to display the Block Sites screen:
3. To enable keyword blocking, select one of the following:
• Per Schedule. Turn on keyword blocking according to the settings on the Schedule
screen.
•
Always. Turn on keyword blocking all the time, independent of the setting in the
Schedule screen.
4. Enter a keyword or domain in the Keyword field, click Add Keyword, and then click Apply.
Content Filtering
40
LTE Broadband 11n Wireless Router MBR1515
Some examples of keyword applications are shown in the following chart.
Keyword
Result
XXX
Block the URL http://www.badstuf.com/xxx.html.
.com
Only websites with other domain suffixes (such as .edu or .gov) can be viewed.
. ( a period)
Block all Internet browsing access.
Up to 32 entries are supported in the Keyword list.
Note: If you block sites, you can set up the router to log attempts to access
them. See Viewing, Selecting, and Saving Logged Information on
page 37.
5. To delete a keyword or domain, select it from the list, click Delete Keyword, and then click
Apply.
6. To specify a trusted user, enter that computer’s IP address in the Trusted IP Address field,
and then click Apply.
You can specify one trusted user, which is a computer that will be exempt from blocking
and logging. Since the trusted user will be identified by an IP address, you should
configure that computer with a fixed IP address.
7. Click Apply to save your settings.
Content Filtering
41
LTE Broadband 11n Wireless Router MBR1515
Blocking Services
1. Log in to the router as described in Log In to Your Router on page 11.
2. In the main menu, under Content Filtering, select Block Services to display this screen:
3. Select one of the following:
• Per Schedule. Turn on keyword blocking according to the settings in the Schedule
screen.
•
Always. Turn on keyword blocking all the time, independent of the Schedule screen.
4. Click Add, and the following screen displays:
5. Either select a service from the Service Type drop-down list, or use the Service/Type User
Defined field to create a custom service.
6. Click Add to create the service, and it will be listed in the Service Table on the Block
Services screen.
7. Click Apply to save your settings.
Content Filtering
42
LTE Broadband 11n Wireless Router MBR1515
Scheduling
The router uses Network Time Protocol (NTP) to obtain the current time and date from one of
several network time servers on the Internet.
Setting Your Time Zone
To localize the time for your log entries, you must
specify your time zone:
1. Log in to the router as described in Log In to
Your Router on page 11.
2. On the main menu under Content Filtering, select
Schedule:
3. Select your time zone. This setting will be used for
the blocking schedule according to your local time
zone and for time-stamping log entries.
If your time zone is currently in daylight savings
time, select the Automatically adjust for
daylight savings time check box.
4. Click Apply to save your settings.
Scheduling Firewall Services
If you enabled service blocking in the Block Services screen or port forwarding in the Ports
screen, you can set up a schedule for when blocking occurs or when access is not restricted.
1. Log in to the router as described in Log In to Your Router on page 11.
2. On the main menu, select the Schedule. The Schedule screen appears.
3. To block Internet services based on a schedule, select Every Day, or select one or more
days. If you want to limit access completely for the selected days, select All Day. Otherwise,
to limit access during certain times for the selected days, fill in the Start Blocking and End
Blocking fields.
4. Enter the values in 24-hour time format. For example, 10:30 a.m. would be 10 hours and 30
minutes, and 10:30 p.m. would be 22 hours and 30 minutes. If you set the start time after the
end time, the schedule will be effective through midnight the next day.
5. Click Apply to save your changes.
Content Filtering
43
LTE Broadband 11n Wireless Router MBR1515
Enabling Security Event Email Notification
To set up the router so that you can receive logs
and alerts by email, select Email from the router
menu to display the following screen:
¾
To receive alerts and logs by email:
1. Select the Turn Email Notification On check
box.
2. Fill in the fields to send alerts and logs through
email.
• Your Outgoing Mail Server. Enter the
name or IP address of the outgoing SMTP
mail server of your ISP (such as
mail.myISP.com).
•
Send to This Email Address. Enter the
e-mail address where you want to send
the alerts and logs. Use a full email
address, such as ChrisXY@myISP.com.
•
My mail server requires authentication. Select this check box if you need to log in
to your SMTP server to send email. If you select this feature, you must enter the user
name and password for the mail server.
Tip: If you cannot remember this information, check the settings in your email
program.
3. Specify when you want the alerts and logs to be sent:
• Send alert immediately. Select the corresponding check box if you would like
immediate notification of a significant security event, such as a known attack, port
scan, or attempted access to a blocked site.
•
Send logs according to this schedule. Specifies how often to send the logs:
Hourly, Daily, Weekly, or When Full.
Day for sending log. Specifies which day of the week to send the log. Relevant when
the log is sent weekly.
Time for sending log. Specifies the time of day to send the log. Relevant when the
log is sent daily or weekly.
If the Weekly, Daily, or Hourly option is selected and the log fills up before the specified
period, the log is automatically e-mailed to the specified email address. After the log is
sent, it is cleared from the router’s memory. If the router cannot e-mail the log file, the log
buffer might fill up. In this case, the router overwrites the log and discards its contents.
4. Click Apply so that your changes take effect.
Content Filtering
44
4.
Managing Your Network
This chapter describes how to perform network management tasks with your LTE Broadband
11n Wireless Router.
•
Router Status
•
Backing Up, Restoring, or Erasing Your Settings
•
Protecting Access to Your Router
•
Running Diagnostic Utilities and Rebooting the Router
•
Upgrading the Router Firmware
45
LTE Broadband 11n Wireless Router MBR1515
Router Status
From the main menu, under Maintenance, select Router Status to view this screen.
You can use this screen to view the status of the router, to show statistics, or to view the
connection status.
•
For information about the fields on this screen, see the table below.
•
See Showing Statistics on page 48 for information about statistics.
•
For information about the Internet connection, see Connection Status on page 49.
Managing Your Network
46
LTE Broadband 11n Wireless Router MBR1515
Field
Description
Firmware Version
This field displays the router firmware version.
Mobile Broadband
WAN Port
Modem Identity
Shows the modem in use.
Modem sw version
The software version of the modem.
Modem driver
version
The driver version of the modem.
IMSI
International Mobile Subscriber Identity. SIM card identity.
IMEI
International Mobile Equipment Identity.
Unique identity of the modem.
Operator
The ISP for the broadband wireless network.
Network mode
The mode of the current network the modem is connected to.
This is dependent on coverage and distance from the cell site.
Connection Status
The status of the Internet connection.
IP Address
The IP address used by the modem. If no address is shown,
the router cannot connect to the Internet.
Protocol
The protocol for the Internet connection, which is PPP
(Point-to-Point).
IP Subnet Mask
The IP subnet mask used by the router’s USB port.
Gateway IP Address The IP address used by the router.
LAN Port
Domain Name
Server
The DNS server IP addresses used by the router. These
addresses are usually obtained dynamically from the ISP.
MAC Address
The Ethernet MAC address used by the router’s LAN port.
IP Address
The LAN port IP address. The default is 192.168.0.1.
DHCP
•
•
IP Subnet Mask
Wireless Port
Name (SSID)
(See Manually
Region
Configure Your
Wireless Settings on
Channel
page 27.
Off. The router does not assign IP addresses to PCs on
the LAN.
On. The router assigns IP addresses to PCs on the LAN.
The LAN port IP subnet mask. The default is 255.255.255.0.
The service set ID, also known as the wireless network name.
The country where the unit is set up for use.
The current channel, which determines the operating
frequency.
Wireless AP
Indicates if the access point feature is disabled or not. If not
enabled, the Wireless LED on the front panel will be off.
Broadcast Name
Indicates if the router is configured to broadcast its SSID.
Managing Your Network
47
LTE Broadband 11n Wireless Router MBR1515
Showing Statistics
Click the Show Statistics button on the Router Status screen to display router usage
statistics:
The following table explains the statistic fields.
Field
Description
Status
The link status. Note that LAN2, LAN3, and LAN4 are guest
networks.
TxPkts
The number of packets transmitted on this port since reset or manual
clear.
RxPkts
The number of packets received on this port since reset or manual
clear.
Collisions
The number of collisions on this port since reset or manual clear.
Tx B/s
The average egress line utilization for this port.
Rx B/s
The average ingress line utilization for this port.
Up Time
The time elapsed since the last power cycle or reset.
Managing Your Network
48
LTE Broadband 11n Wireless Router MBR1515
Connection Status
Click the Connection Status button on the Router Status screen:
This screen shows the following statistics:
Field
Mobile Broadband
Service
Description
Connection Status
The status of the Internet connection.
• Scanning. The modem is scanning for broadband
wireless networks in your area.
• Connected. The router is connected to the Internet.
• No USB Device Attached. The router does not detect a
USB modem connected to its USB port. Either the modem
is disconnected, or it is not correctly seated. To correct the
problem remove the modem and reinsert it into the port.
Received Signal Quality Modem radio reception. A small, negative number indicates
(in dBm)
good signal quality.
Bytes Transmitted
The number of bytes transmitted in the most recent connection
session.
Bytes Received
The number of bytes received in the most recent connection
session.
Tx B/s
The transmission rate.
Rx B/s
The receiving rate.
System Uptime
Time elapsed since the last reboot.
Managing Your Network
49
LTE Broadband 11n Wireless Router MBR1515
Field
Connection Status
Description
Connection Time
The time elapsed since the last connection to the Internet
through the broadband port.
Connecting to Server
The connection status.
Negotiation
Success or Failed.
Authentication
Success or Failed.
Getting IP Address
The IP address assigned to the WAN port by the ADSL
Internet Service Provider.
Getting Network Mask
The network mask assigned to the WAN port by the ADSL
Internet Service Provider.
Viewing Attached Devices
The Attached Devices screen shows all IP devices that the router discovered on the local
network. From the main menu, under Maintenance, select Attached Devices:
For each device, the table shows the IP address, device name if available, and the Ethernet
MAC address. If the router is rebooted, this data is lost until the router rediscovers the
devices. To force the router to look for attached devices, click the Refresh button.
Managing Your Network
50
LTE Broadband 11n Wireless Router MBR1515
Backing Up, Restoring, or Erasing Your Settings
The configuration settings of the router are stored in a configuration file in the router. This file
can be backed up to your computer, restored, or reverted to factory default settings. The
procedures in the following sections explain how to do these tasks.
Backing Up the Configuration to a File
1. Log in to the router. Type http://www.routerlogin.net in the address field of your
Internet browser. Enter admin for the user name and your password (or the default,
password).
2. Under Maintenance on the main menu, select Backup Settings to display the Backup
Settings screen.
3. Click Save to save a copy of the current settings.
4. Store the .cfg file on a computer on your network.
Restoring the Configuration from a File
¾
To restore the configuration:
1. Log in to the router. Type http://www.routerlogin.net in the address field of your
Internet browser. Enter admin for the user name and your password (or the default,
password).
2. Under Maintenance on the main menu, select Backup Settings.
3. Enter the full path to the file on your network, or click Browse to locate the file.
4. When you have located the .cfg file, click Restore to upload the file to the router.
The router reboots.
Managing Your Network
51
LTE Broadband 11n Wireless Router MBR1515
Erasing the Configuration
You can use the Erase feature to erase its configuration settings and restore the router to the
factory default settings.
¾
To erase the configuration:
1. Under Maintenance on the main menu, select Backup Settings.
2. Click Erase.
The router reboots.
After an erase, the router password is password, the LAN IP address is 192.168.0.1, and
the router DHCP client is enabled.
Note: To restore the factory default settings when you do not know the
login password or IP address, press the Restore Factory Settings
button on the bottom of the router for 6 seconds.
Protecting Access to Your Router
For security reasons, the router has its own user name and password. Also, after a period of
inactivity, the login automatically disconnects. The user name and password are not the same
as a user name or password you might use to log in to your Internet connection.
NETGEAR recommends that you change this password to a more secure password. The
ideal password should contain no dictionary words from any language, and should be a
mixture of both uppercase and lowercase letters, numbers, and symbols. Your password can
be up to 30 characters.
Changing the Built-In Password
1. To log in to the router, type http://www.routerlogin.net in the address field of your
Internet browser. Enter admin for the user name and your password (or the default,
password).
Note: If you changed the password and do not remember what it is, you
can reset the router to its factory default settings. See Restoring the
Default Configuration and Password on page 95.
Managing Your Network
52
LTE Broadband 11n Wireless Router MBR1515
2. From the main menu, under Maintenance, select Set Password.
3. To change the password, first enter the old password, and then enter the new password
twice.
4. Click Apply to save your changes.
Note: After changing the password, you must log in again to continue the
configuration. If you have backed up the router settings previously,
you should do a new backup so that the saved settings file includes
the new password.
Changing the Administrator Login Time-Out
For security, the administrator login to the router configuration times out after a period of
inactivity. To change the login time-out period:
1. In the Set Password screen, type a number in the Administrator login times out field.
The suggested default value is 5 minutes.
2. Click Apply to save your changes, or click Cancel to keep the current period.
Running Diagnostic Utilities and Rebooting the Router
The router has a diagnostics feature. You can use the Diagnostics screen to perform the
following functions from the router:
•
Ping an IP address to test connectivity to see if you can reach a remote host. If Ping VPN
is enabled, the ping packet always goes through the VPN if the VPN tunnel is enabled
and working.
•
Perform a DNS lookup to test if an Internet name resolves to an IP address to verify that
the DNS server configuration is working.
•
Display the routing table to identify what other routers the router is communicating with.
•
Reboot the router to enable new network configurations to take effect or to clear problems
with the router’s network connection.
Managing Your Network
53
LTE Broadband 11n Wireless Router MBR1515
From the main menu, under Maintenance,
select Diagnostics.
•
Ping. Ping an IP address.
•
Lookup. A Domain Name Server (DNS)
converts the Internet name such as
www.netgear.com to an IP address. If
you need the IP address of a server on
the Internet, you can do a DNS lookup to
find the IP address.
•
Display. View the internal routing table.
Typically, this information is used only by
Technical Support.
•
Reboot. Shut down and restart the
router. If you reboot the router you will
lose your connection. To access the
router you will need to log in again after it has finished rebooting.
•
Save. Save diagnostic information.
•
Module Data. Click to view the module
data.
Managing Your Network
54
LTE Broadband 11n Wireless Router MBR1515
Upgrading the Router Firmware
The router firmware is stored in flash memory, and can be upgraded as new firmware is
released by NETGEAR. Upgrade files can be downloaded from the NETGEAR web site. If
the upgrade file is compressed (a .zip file), you must first extract the binary (.bin or .img) file
before uploading it to the router.
NETGEAR recommends that you back up your configuration before doing a firmware
upgrade. After the upgrade is complete, you might need to restore your configuration
settings.
1. Download and unzip the new firmware file from NETGEAR.
The Web browser used to upload new firmware into the router must support HTTP
uploads. NETGEAR recommends using Microsoft Internet Explorer 5.0 or later, or Mozilla
Firefox 2.0 or later.
2. Log in to the router. Type http://www.routerlogin.net in the address field of your Internet
browser. Enter admin for the user name and your password (or the default, password).
3. From the main menu, under Maintenance, select Router Upgrade to display this screen.
4. Click Browse to locate the binary (.bin or .img) upgrade file.
5. Click Upload.
WARNING:
When uploading firmware to the router, do not interrupt the Web
browser by closing the window, clicking a link, or loading a new
page. If the browser is interrupted, it might corrupt the firmware,
causing router to be unworkable and inaccessible. When the
upload is complete, your router will automatically restart. The
upgrade process typically takes about 1 minute. In some cases,
you might need to clear the configuration and reconfigure the
router after upgrading.
Managing Your Network
55
5.
Advanced
This chapter describes how to configure the advanced features of your LTE Broadband 11n
Wireless Router.
•
SIM Settings
•
SMS Messages
•
Advanced Wireless Settings
•
Wireless Repeating Function
•
Port Forwarding and Port Triggering
•
WAN Setup
•
LAN Setup
•
QoS Setup
•
Dynamic DNS
•
Using Static Routes
•
Enabling Remote Management
•
Universal Plug and Play
•
Traffic Meter
•
IPv6 Internet Configuration and Status Check
56
LTE Broadband 11n Wireless Router MBR1515
SIM Settings
From the main menu, select SIM Settings to display the following screen:
Field
Description
Enabling or Disabling the PIN Code
Controls whether the PIN code on the SIM card will be used to
connect to the network.
Changing the PIN Code
Changes the PIN code on the SIM card.
SIM status
Current SIM card access status.
SMS Messages
Short Message Service (SMS) is a text messaging service for communication systems. The
SMS screens enable you to perform the tasks that are explained in the following sections:
•
View SMS Messages
•
Send SMS Messages
View SMS Messages
New SMS messages are available when the SMS
Advanced
57
LED on the front panel is solid green.
LTE Broadband 11n Wireless Router MBR1515
¾
To view new SMS messages:
1. On the main menu, under Advanced, select SMS Messages, and then select Inbox
from the drop-down list to display the SMS Message screen:
2. Click a particular message to view it.
• Click Forward or Reply to forward or reply to the specified message.
•
Click Delete to delete the specified SMS message.
3. Otherwise, do one of the following:
• Click Refresh to redisplay all SMS messages from the SIM card.
¾
•
Click Delete All to delete all SMS messages from the SIM card
•
Click New to open a new message. See Send SMS Messages on page 59 for more
information.
To view sent SMS messages:
1. On the main menu, under Advanced, select SMS Settings, and then select Sent from
the drop-down list to display the SMS Message screen:
2. Click a particular message to display it.
• Click Forward to forward the specified SMS message.
•
Click Resend to resend the specified SMS message.
•
Click Delete to delete the specified SMS message.
Advanced
58
LTE Broadband 11n Wireless Router MBR1515
3. Click New to open a new message. See Send SMS Messages on page 59 for more
information.
¾
To view draft SMS messages:
1. On the main menu, under Advanced, select SMS Settings, and then select Draft from
the drop-down list to display the SMS Message screen:
2. Click a particular message to display it.
• Click Edit to edit the specified SMS message.
•
Click Send to send the specified SMS message.
•
Click Delete to delete the specified SMS message.
3. Click New to open a new message. See Send SMS Messages on page 59 for more
information.
Send SMS Messages
You can create a new SMS message or send an SMS message over email.
¾
To send SMS messages:
1. From either the SMS Message Inbox or Sent screen, click New to display the SMS
Message Compose screen:
2. In the To field, enter the phone number that you want to send your SMS message to, or the
email address to send a SMS message over email.
For multitarget messages, you can send a message to multiple phone numbers. Each
phone number has to be separated by a comma (,).
Advanced
59
LTE Broadband 11n Wireless Router MBR1515
3. In the Content field, enter the content of the SMS message. The length of the message is
shown at the bottom of the content box.
4. Click Send to send the SMS message.
Alternatively, you can also take one of the following actions:
•
Click Clear to remove the information in the To and Content fields.
•
Click Save to save message to Draft.
•
Click Cancel to return to the Inbox without sending the message.
Advanced Wireless Settings
From the main menu, select Advanced Wireless Settings to display the following screen:
Field
Description
Enable Wireless Router Radio
Selected by default, this setting enables the wireless radio, which
allows the router to work as a wireless access point.
Turning off the wireless radio can be helpful for configuration,
network tuning, or troubleshooting.
Fragmentation Length, CTS/RTS
Threshold, and Preamble Mode
These should be left at their default settings.
Router PIN
The PIN number used for Push 'N' Connect.
Disable Router PIN
By default, this check box is cleared. This allows the WPS clients to
discover the router’s PIN.
Advanced
60
LTE Broadband 11n Wireless Router MBR1515
Field
Description
Keep Wireless Settings
By default, this check box is cleared. This allows the router to
automatically generate the SSID and WPA/WPA2 security settings
when it implements WPS. After WPS is implemented, the router
automatically selects the Keep Existing Wireless Settings check
box so that your SSID and wireless security settings remain the
same if other WPS-enabled devices are added later.
Turn Access Control On
Access control is disabled by default so that any computer
configured with the correct SSID can connect. See Restricting
Access by MAC Address on page 61.
Wireless Station Access Control
By default, any wireless PC configured with the correct SSID and wireless security settings is
allowed access to your wireless network. You can use wireless access point settings in the
Wireless Setting screen to further restrict wireless access to your network:
•
Turn off wireless connectivity completely.
You can completely turn off the wireless portion of the router. For example, if you use
your notebook computer to wirelessly connect to your router, and you take a business
trip, you can turn off the wireless portion of the router while you are traveling. Other
members of your household who use computers connected to the router via Ethernet
cables can still use the router. To do this, clear the Enable Wireless Router Radio check
box on the Wireless Settings screen, and then click Apply.
•
Hide your wireless network name (SSID).
By default, the router is set to broadcast its wireless network name (SSID). You can
restrict wireless access to your network by not broadcasting the wireless network name
(SSID). To do this, clear the Enable SSID Broadcast check box on the Wireless Settings
screen, and then click Apply. Wireless devices will not “see” your router. You must
configure your wireless devices to match the wireless network name (SSID) of the router.
Note: The SSID of any wireless access adapters must match the SSID
you configure in the router. If they do not match, you will not get a
wireless connection to the router.
Restricting Access by MAC Address
For increased security, you can restrict access to the wireless network to allow only specific
PCs based on their MAC addresses. You can restrict access to only trusted PCs so that
unknown PCs cannot wirelessly connect to the LTE Broadband 11n Wireless Router. MAC
address filtering adds an obstacle against unwanted access to your network, but the data
broadcast over the wireless link is fully exposed.
Advanced
61
LTE Broadband 11n Wireless Router MBR1515
Note: If you configure the router from a wireless computer, add your
computer’s MAC address to the access list. Otherwise you will lose
your wireless connection when you click Apply. You must then
access the router from a wired computer, or from a wireless
computer that is on the access control list, to make any further
changes.
¾
To restrict access based on MAC addresses:
1. From the main menu, under Advanced, select Wireless Settings. Click Setup Access
List to display the Wireless Station Access List screen.
2. Adjust the list as needed for your network. You can add devices to the Trusted Wireless
Stations list. Click Add to display the following screen:
3. You can add devices to the list using either of the following methods:
• If the computer is in the Available Wireless Cards table, select its radio button to
capture its MAC address.
•
Use the Wireless Card Entry fields to enter the MAC address of the device to be
added. The MAC address can usually be found on the bottom of the wireless device.
•
If no device name appears when you enter the MAC address, you can type a
descriptive name for the computer that you are adding.
4. Click Apply to save these settings. Now, only devices on this list will be allowed to wirelessly
connect to the router.
Advanced
62
LTE Broadband 11n Wireless Router MBR1515
Wireless Repeating Function
From the main menu, select Wireless Repeating Function to display the following screen:
Field
Description
Enable Wireless Repeating
Enable this if you wish to use either Bridge mode or Repeater mode,
and then select the mode you want for your environment.
• Wireless Repeater. In this mode, the MBR1515 will
communicate only with another Base Station–mode wireless
station. You must enter the MAC address (physical address) of
the other Base Station–mode wireless station in the field
provided. WEP / WPA-PSK [TKIP] can (and should) be used to
protect this communication.
• Wireless Base Station. Select this only if this MBR1515 is the
"master" for a group of Repeater-mode wireless stations. The
other Repeater–mode wireless stations must be set to Wireless
Repeater–mode, using this MBR1515's MAC address. They
then send all traffic to this master, rather than communicate
directly with each other. WEP / WPA-PSK [TKIP] can (and
should) be used to protect this traffic. If this option is selected,
you must enter the MAC addresses of the other access points in
the fields provided.
Advanced
63
LTE Broadband 11n Wireless Router MBR1515
Port Forwarding and Port Triggering
Port forwarding and port triggering are advanced features that affect the behavior of the
firewall in your router. In the Port Forwarding / Port Triggering screen, you can make local
computers or servers available to the Internet for different services (for example, FTP or
HTTP), to play Internet games (like Quake III), or to use Internet applications (like
CU-SeeMe).
•
Port forwarding is designed for FTP, Web server, or other server-based services. Once
port forwarding is set up, requests from the Internet are forwarded to the correct server.
•
Port triggering monitors outbound traffic. When the router detects traffic on the specified
outbound port, it remembers the IP address of the computer that sent the data and
triggers the incoming port. Incoming traffic on the triggered port is then forwarded to the
triggering computer. Port triggering allows requests from the Internet only after a
designated port is triggered. Port triggering applies to chat and Internet games.
Port Forwarding
¾
To set up port forwarding:
1. From the main menu, under Advanced, select Port Forwarding/Port Triggering. The
following screen displays:
By default, the Port Forwarding radio button is selected.
2. You can select a service or create a custom service.
• Select a service from the Service Name drop-down list and specify the computer’s IP
address.
•
If you want to add a service that is not in the list, click the Add Custom Service
button. Fill in the fields in the Add Custom Service screen.
The service appears in the list.
Advanced
64
LTE Broadband 11n Wireless Router MBR1515
Port Triggering
¾
To set up port triggering:
1. From the main menu, under Advanced, select Port Forwarding/Port Triggering.
2. Select the Port Triggering radio button to display the following screen:
3. Click Add Service and fill in the fields in the Add Service screen.
The service appears in the list. For more detailed information, see the Port
Forwarding/Port Triggering help.
WAN Setup
To change broadband Internet connection settings, use the Broadband Settings screen, as
described in Manually Configure Your Internet Settings on page 14.
¾
To view or change the WAN setup:
1. From the main menu, select WAN Setup to display the
WAN Setup screen.
2. Make the changes that you want, and then click Apply to
save the settings.
Advanced
65
LTE Broadband 11n Wireless Router MBR1515
The WAN Setup fields are described in the table below.
Setting
Description
Disable SPI Firewall
This check box is usually cleared so that the firewall protects your
LAN against port scans and denial of service attacks. This check box
should be selected only in special circumstances.
Default DMZ Server
This feature is sometimes helpful when you are using some online
games and videoconferencing. Be careful when using this feature
because it makes the firewall security less effective. See Setting Up
a Default DMZ Server on page 66.
Respond to Ping on Internet
If you want the router to respond to a ping from the Internet, select
this check box. This should be used only as a diagnostic tool, since it
allows your router to be discovered. Do not select this check box
unless you have a specific reason to do so.
MTU Size
Maximum Transmit Unit (MTU) value. For most Ethernet networks
this is 1500 bytes, or 1492 bytes for PPPoE connections, or 1436
bytes for PPTP connections.
NAT Filtering
This is set to Secured to provide a secure firewall to protect
computers on the LAN from attacks from the Internet. The Open
setting is less secure.
Disable SIP ALG
Some VoIP applications do not work well with SIP ALG. Selecting
this check box might help your VoIP devices create or accept a call
through the router.
Setting Up a Default DMZ Server
WARNING:
For security reasons, you should avoid using the default DMZ
server feature. When a computer is designated as the default DMZ
server, it loses much of the protection of the firewall, and is
exposed to many exploits from the Internet. If compromised, the
computer can be used to attack your network.
The default DMZ server feature is helpful when you are using some online games and
videoconferencing applications that are incompatible with NAT. The router is programmed to
recognize some of these applications and to work correctly with them, but there are other
applications that might not function well. In some cases, one local computer can run the
application correctly if that computer’s IP address is entered as the default DMZ server.
Incoming traffic from the Internet is normally discarded by the router unless the traffic is a
response to one of your local computers or a service that you have configured in the Ports
screen. Instead of discarding this traffic, you can have it forwarded to one computer on your
network. This computer is called the default DMZ server.
Advanced
66
LTE Broadband 11n Wireless Router MBR1515
¾
To assign a computer or server to be a default DMZ server:
1. Go to the WAN Setup screen as described in the previous section.
2. Select the Default DMZ Server check box.
3. Type the IP address for that server.
4. Click Apply to save your changes.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as DHCP and RIP.
These features can be found under Advanced in the router main menu.
The router is shipped preconfigured to use private IP addresses on the LAN side, and to act
as a DHCP server. The router default LAN IP configuration is:
•
LAN IP address. 192.168.0.1
•
Subnet mask. 255.255.255.0
These addresses are part of the Internet Engineering Task Force (IETF)–designated private
address range for use in private networks, and should be suitable in most applications. If your
network has a requirement to use a different IP addressing scheme, you can make those
changes in this screen.
Tip: If you change the LAN IP address of the router while connected through
the browser, you will be disconnected, and so will others connected to
the router. To connect to the router, you must open a new connection to
the new IP address and log in again. Others using the router must restart
their computers to connect to the router again.
¾
To view or change the LAN setup:
1. Select LAN IP to display the LAN Setup screen.
2. Change the settings. For more information, see DHCP Settings on page 68, or Reserved IP
Addresses on page 69.
Advanced
67
LTE Broadband 11n Wireless Router MBR1515
3. Click Apply to save the changes.
The LAN TCP/IP Setup parameters are explained in the table below.
Settings
Description
Device Name
LAN TCP/IP
Setup
IP Address
The LAN IP address of the router.
IP Subnet Mask
The LAN subnet mask of the router. Combined with the IP
address, the IP subnet mask allows a device to know which other
addresses are local to it, and which must be reached through a
gateway or router.
RIP Direction
RIP (Routing Information Protocol, RFC1058 and RFC1389)
allows a router to exchange routing information with other routers.
The RIP Direction selection controls how the router sends and
receives RIP packets. Both is the default.
• When set to Both or Out Only, the router broadcasts its
routing table periodically.
• When set to Both or In Only, it incorporates the RIP
information that it receives.
RIP Version
RIP Version: This controls the format and the broadcasting
method of the RIP packets that the router sends. (It recognizes
both formats when receiving.) By default, this is set for Disabled.
• RIP-1 is universally supported. RIP-1 is probably adequate for
most networks, unless you have an unusual network setup.
• RIP-2 carries more information. Both RIP-2B and RIP-2M
send the routing data in RIP-2 format.
- RIP-2B uses subnet broadcasting.
- RIP-2M uses multicasting.
Use Router as a DHCP
DHCP Server
Server
For more
information, see
DHCP Settings
Starting IP Address
on page 68.
Ending IP Address
Address Reservation
For more information, see DHCP Settings
on page 68.
This check box is usually selected so that the router functions as a
Dynamic Host Configuration Protocol (DHCP) server. See DHCP
Settings on page 68.
Specify the start of the range for the pool of IP addresses in the
same subnet as the router.
Specify the end of the range for the pool of IP addresses in the
same subnet as the router.
When you specify a reserved IP address for a computer on the
LAN, that computer receives the same IP address each time it
access the router’s DHCP server. Assign reserved IP addresses
to servers that require permanent IP settings.
DHCP Settings
By default, the router functions as a Dynamic Host Configuration Protocol (DHCP) server,
allowing it to assign IP, DNS server, and default gateway addresses to all computers
connected to the router’s LAN. The assigned default gateway address is the LAN address of
the router. IP addresses is assigned to the attached PCs from a pool of addresses specified
Advanced
68
LTE Broadband 11n Wireless Router MBR1515
in this screen. Each pool address is tested before it is assigned to avoid duplicate addresses
on the LAN.
For most applications, the default DHCP and TCP/IP settings of the router are satisfactory.
Use Router as DHCP Server
If another device on your network will be the DHCP server, or if you will manually configure
the network settings of all of your computers, clear the Use Router as DHCP Server check
box on the LAN IP Setup screen. Otherwise, leave it selected.
Specify the pool of IP addresses to be assigned by filling in the Starting IP Address and
Ending IP Address fields. These addresses should be part of the same IP address subnet
as the router’s LAN IP address. Using the default addressing scheme, you should define a
range between 192.168.0.2 and 192.168.0.254, although you might want to save part of the
range for devices with fixed addresses.
The router delivers the following parameters to any LAN device that requests DHCP:
•
An IP address from the range you have defined.
•
Subnet mask.
•
Gateway IP address is the router’s LAN IP address.
•
Primary DNS server, if you entered a primary DNS address in the Basic Settings screen;
otherwise, the router’s LAN IP address.
•
Secondary DNS server, if you entered a secondary DNS address in the Basic Settings
screen.
•
WINS server (Windows Internet Naming Service Server) determines the IP address
associated with a particular Windows computer. A WINS server records and reports a list
of names and IP address of Windows PCs on its local network. If you connect to a remote
network that contains a WINS server, enter the server’s IP address here. This allows your
PCs to browse the network using the Network Neighborhood feature of Windows.
Reserved IP Addresses
When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it access the router’s DHCP server. Reserved IP
addresses should be assigned to servers that require permanent IP settings.
¾
To reserve an IP address:
1. Click the Add button.
2. In the IP Address field, type the IP address to assign to the computer or server. Choose an
IP address from the router’s LAN subnet, such as 192.168.0.x.
3. Type the MAC address of the computer or server.
Advanced
69
LTE Broadband 11n Wireless Router MBR1515
Tip: If the computer is on your network, it is listed on the same screen for your
convenience. Clicking the radio button for each entry in the attached
device list fills in the fields automatically with the computer’s MAC
address and name.
4. Click Apply to enter the reserved address into the table.
Note: The reserved address will not be assigned until the next time the
computer contacts the router’s DHCP server. Reboot the computer
or access its IP configuration and force a DHCP release and renew.
¾
To edit or delete a reserved address entry:
1. Click the button next to the reserved address you want to edit or delete.
2. Click Edit or Delete.
Advanced
70
LTE Broadband 11n Wireless Router MBR1515
QoS Setup
QoS is an advanced feature that can be used to prioritize some Internet applications and
online gaming, and to minimize the impact when the bandwidth is busy.
From the main menu, select QoS Setup to display the following screen:
Field
Description
Wi-Fi Multi-media (WMM) Settings
WMM (Wireless Multimedia) is a subset of the 802.11e standard. WMM
allows wireless traffic to have a range of priorities depending on the kind
of data. Time-dependent information, such as video or audio, has a higher
priority than normal traffic. For WMM to function correctly, wireless clients
must also support WMM.
Turn Internet Access QoS On
If you enable QoS, the QoS function works to prioritize Internet access
traffic. For the applications that already exist in the drop-down list (e.g.,
On-line Gaming, Ethernet LAN Port, or a specified MAC address), you can
modify the priority level by clicking the Edit button, or clicking the Delete
button to erase the priority rule. Otherwise, you can also define the priority
policy for online gaming, an application, a LAN port, or the computer's
MAC address by clicking the Add Priority Rule button.
Bandwidth Control
To set up the total maximum uplink bandwidth, click the Check button to
detect current uplink bandwidth that will help you to determinate the
maximum bandwidth setting.
Advanced
71
LTE Broadband 11n Wireless Router MBR1515
QoS Priority Rule List
From the QoS Setup screen, click Setup QoS Rule to display the following screen:
QoS Priority Rules
From the QoS Priority Rule List, click Add Priority Rule to display the following screen:
Advanced
72
LTE Broadband 11n Wireless Router MBR1515
For Applications or Online Gaming
¾
To set up the priority for an application or online gaming:
1. Select Applications or On-line Gaming from the Priority Category lists.
2. Select the Internet application or game for which you want to set the priority from the
relevant list.
3. Select the priority level: Highest, High, Normal, or Low.
4. You can also type the name in the QoS Policy field for this rule if you prefer.
5. Click Apply.
For Ethernet LAN Ports
To set up the priority for LAN port:
1. Select Ethernet LAN Port from the Priority Category list.
2. Select the LAN port number you plan to specify the priority level for those computers
connecting on this LAN port.
3. Select the priority level: Highest, High, Normal, or Low.
4. You can also type the name in the QoS Policy field for this rule if you prefer.
5. Click Apply.
Advanced
73
LTE Broadband 11n Wireless Router MBR1515
For MAC Addresses
¾
To set up the priority for specified computer via its MAC address:
1. Select MAC Address from the Priority Category list.
2. Click the Refresh button to update the list of computers already connected to the router.
3. Select the entry's radio button.
4. Modify the information in the MAC Address and Device Name fields.
5. Select the priority level: Highest, High, Normal, or Low.
6. You can also type the name in the QoS Policy field for this rule if you prefer.
7. Click the Edit button.
8. Click Apply.
¾
To add the priority for specified computer via its MAC address:
1. Choose MAC Address from the Priority Category list.
2. Enter the MAC address for the computer for which you are specifying the priority.
3. You can also type a name that is easy to remember in the Device Name fields.
4. Select the priority level: Highest, High, Normal, or Low.
5. You can also type a name in the QoS Policy field for this rule if you prefer.
6. Click the Add button.
7. Click Apply.
¾
To delete a priority rule entry:
1. Select the entry's radio button of the table.
2. Click the Delete button.
3. Click Apply.
Advanced
74
LTE Broadband 11n Wireless Router MBR1515
Dynamic DNS
If your network has a permanently assigned IP address, you can register a domain name and
have that name linked with your IP address by public Domain Name Servers (DNS).
However, if your Internet account uses a dynamically assigned IP address, you will not know
in advance what your IP address will be, and the address can change frequently. In this case,
you can use a commercial Dynamic DNS service to register your domain to their IP address,
and forward traffic directed at your domain to your frequently changing IP address.
The router contains a client that can connect to a Dynamic DNS service provider. To use this
feature, you must select a service provider and obtain an account with them. After you have
configured your account information in the router, whenever your ISP-assigned IP address
changes, your router will automatically contact your Dynamic DNS service provider, log in to
your account, and register your new IP address.
WARNING:
If your ISP assigns a private WAN IP address such as 192.168.x.x
or 10.x.x.x, the Dynamic DNS service will not work because
private addresses will not be routed on the Internet.
¾
To configure Dynamic DNS:
1. From the main menu, select Dynamic DNS
to display the Dynamic DNS screen:
2. Access the website of one of the Dynamic DNS
service providers whose names appear in the
Service Provider drop-down list, and register
for an account.
For example, for dyndns.org, go to
www.dyndns.org.
3. Select the Use a Dynamic DNS Service check
box.
4. Select the name of your Dynamic DNS service provider.
5. Fill in the Host Name, User Name, and Password fields.
The Dynamic DNS service provider might call the host name a domain name. If your URL
is myName.dyndns.org, then your host name is myName. The password can be a key for
your Dynamic DNS account.
If your Dynamic DNS provider allows the use of wildcards in resolving your URL, you can
select the Use wildcards check box to activate this feature.
For example, the wildcard feature will cause *.yourhost.dyndns.org to be aliased to the
same IP address as yourhost.dyndns.org.
6. Click Apply to save your configuration.
Advanced
75
LTE Broadband 11n Wireless Router MBR1515
Using Static Routes
Static routes provide additional routing information to your router. Under normal
circumstances, the router has adequate routing information after it has been configured for
Internet access, and you do not need to configure additional static routes. You must configure
static routes only for unusual cases such as multiple routers or multiple IP subnets located on
your network.
Static Route Example
As an example of when a static route is needed, consider the following case:
•
Your primary Internet access is through a cable modem to an ISP.
•
You have an ISDN router on your home network for connecting to the company where
you are employed. This router’s address on your LAN is 192.168.0.100.
•
Your company’s network is 134.177.0.0.
When you first configured your router, two implicit static routes were created. A default route
was created with your ISP as the router, and a second static route was created to your local
network for all 192.168.0.x addresses. With this configuration, if you attempt to access a
device on the 134.177.0.0 network, your router forwards your request to the ISP. The ISP
forwards your request to the company where you are employed, and the request is likely to
be denied by the company’s firewall.
In this case you must define a static route, telling your router that 134.177.0.0 should be
accessed through the ISDN router at 192.168.0.100.
In this example:
¾
•
The Destination IP Address and IP Subnet Mask fields specify that this static route
applies to all 134.177.x.x addresses.
•
The Gateway IP Address fields specify that all traffic for these addresses should be
forwarded to the ISDN router at 192.168.0.100.
•
In the Metric field, a value of 1 will work since the ISDN router is on the LAN.
This represents the number of routers between your network and the destination. This is
a direct connection, so it is set to 1.
•
Private is selected only as a precautionary security measure in case RIP is activated.
To configure static routes:
1. From the main menu, under Advanced, select Static Routes to view the Static Routes
screen.
Advanced
76
LTE Broadband 11n Wireless Router MBR1515
2. Select the radio button of the static route you want to configure.
3. Click Add or Edit to display the following screen:
4. Fill in or change the fields:
• Route Name. The route name is for identification purposes only.
•
Private. Select this check box if you want to limit access to the LAN only.
The static route will not be reported in RIP.
•
Active. Select this check box to make this route effective.
•
Destination IP Address, and IP Subnet Mask. If the destination is a single host,
type a subnet value of 255.255.255.255.
•
Gateway IP Address. This must be a router on the same LAN segment as the router.
•
Metric. Type a number between 2 and 15. This represents the number of routers
between your network and the destination. Usually, a setting of 2 or 3 works, but if this
is a direct connection, set it to 2.
5. Click Apply to save your changes. If you added a static route, it is added to the Static
Routes screen.
Enabling Remote Management
Using the Remote Management screen, you can allow a user or users on the Internet to
configure, upgrade, and check the status of your router.
Tip: Be sure to change the router default password to a very secure
password. The ideal password should contain no dictionary words from
any language, and should be a mixture of letters (both upper-case and
lower-case), numbers, and symbols. Your password can be up to 30
characters.
¾
To configure Remote Management
1. Log in to the router. Type http://www.routerlogin.net in the address field of your
Internet browser. Enter admin for the user name and your password (or the default,
password).
Advanced
77
LTE Broadband 11n Wireless Router MBR1515
2. Under Advanced, select Remote Management:
3. Select the Turn Remote Management On
check box.
4. Specify which external addresses will be
allowed to access the router’s remote
management.
For security, restrict access to as few external
IP addresses as practical:
•
To allow access from any IP address on
the Internet, select Everyone.
•
To allow access from a range of IP
addresses on the Internet, select IP
Address Range. Enter a beginning and ending IP address to define the allowed
range.
•
To allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address that will be allowed access.
5. Specify the port number that will be used for accessing the router menu.
Access normally uses the standard HTTP service port 80. For greater security, you can
enter a different port number. Choose a number between 1024 and 65535, but do not use
the number of any common service port. The default is 8080, which is a common
alternate for HTTP.
6. Click Apply to have your changes take effect.
When accessing your router from the Internet, type your router WAN IP address in your
Internet browser address or location field, followed by a colon (:) and the custom port
number. For example, if your external address is 134.177.0.123 and you use port number
8080, enter: http://134.177.0.123:8080. Be sure to include http:// in the address.
Universal Plug and Play
Universal Plug and Play (UPnP) helps devices such as Internet appliances and computers
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
1. Select UPnP on the main menu to display the UPnP screen:
2. Fill in the settings on the UPnP screen:
Advanced
78
LTE Broadband 11n Wireless Router MBR1515
•
Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration.
The default setting for UPnP is enabled. If this feature is disabled, the router will not
allow any device to automatically control the resources, such as port forwarding
(mapping), of the router.
•
Advertisement Period. The advertisement period is how often the router advertises
(broadcasts) its UPnP information. This value can range from 1 to 1440 minutes. The
default period is 30 minutes. Shorter durations ensure that control points have current
device status at the expense of additional network traffic. Longer durations might
compromise the freshness of the device status but can significantly reduce network
traffic.
•
Advertisement Time To Live. The time to live for the advertisement is measured in
hops for each UPnP packet sent. A hop is the number of steps allowed to propagate
for each UPnP advertisement before it disappears. The number of hops can range
from 1 to 255. The default value for the advertisement time to live is 4 hops, which
should be fine for most home networks. If you notice that some devices are not being
updated or reached correctly, then it might be necessary to increase this value a little.
•
UPnP Portmap Table. The UPnP Portmap Table displays the IP address of each
UPnP device that is currently accessing the router and which ports (internal and
external) that device has opened.
3. To save or cancel your changes or refresh the table:
• Click Apply to save the new settings to the router.
•
Click Cancel to disregard any unsaved changes.
•
Click Refresh to update the portmap table and to show the active ports that are
currently opened by UPnP devices.
Advanced
79
LTE Broadband 11n Wireless Router MBR1515
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic passing through your
router’s Internet port. With the Traffic Meter utility, you can set limits for traffic volume, set a
monthly limit, and get a live update of traffic usage. You enable separate traffic meters for the
mobile broadband connection and the Ethernet connection.
¾
To monitor traffic on your router:
1. Under Advanced on the router menu, select
Traffic Meter.
2. Click the appropriate Show Traffic Meter
Application for ... radio button for the type of
Internet connection (e.g., mobile broadband or
Ethernet) you are setting up.
3. To enable the traffic meter, select the Enable
Traffic Meter check box.
4. If you would like to record and restrict the
volume of Internet traffic, select the Traffic
volume control by radio button. You can
select one of the following options for
controlling the traffic volume:
• No Limit. No restriction is applied when
the traffic limit is reached.
•
Download only. The restriction is applied
to incoming traffic only.
•
Both Directions. The restriction is
applied to both incoming and outgoing
traffic.
5. You can limit the amount of data traffic allowed
per month:
• By specifying how many Mbytes per
month are allowed.
•
By specifying how many hours of traffic are allowed.
6. Set the Traffic Counter to begin at a specific time and date.
7. Set up traffic control to issue a warning message before the monthly limit of Mbytes or hours
is reached. You can select one of the following to occur when the limit is attained:
• The Internet LED flashes green or amber.
•
The Internet connection is disconnected and disabled.
8. Set up Internet Traffic Statistics to monitor the data traffic.
9. Click the Traffic Status button if you want a live update on Internet traffic status on your
router.
10. Click Apply to save your settings.
Advanced
80
LTE Broadband 11n Wireless Router MBR1515
IPv6 Internet Configuration and Status Check
The IPv6 screen allows you to configure and check the status of your IPv6 Internet
connection.
¾
To configure the Internet connection type:
1. From the main menu, under Advanced, select IPv6. The IPv6 Configuration screen
displays.
The default setting is Disabled, which turns off the IPv6 function.
2. Select the IPv6 Internet connection type you want to use, which should be provided by your
ISP.
• 6to4 Tunnel. If your ISP does not provide a specific IPv6 connection, select 6to4
Tunnel.
This screen specifies the remote relay router to which your router creates the 6to4
tunnel. If your ISP provides the address of its own relay router, you can put it here.
You can also leave it as Auto, and the router will use any address that is available.
Note: The 6to4 tunnel connection needs the IPv4 Internet connection to be
up first.
In the LAN Setup section, enter the requested information:
Router’s IPv6 Address on LAN. This shows the IPv6 address acquired for the
router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also roughly indicated by the underline (_) under the IPv6 address.
Advanced
81
LTE Broadband 11n Wireless Router MBR1515
•
IP Address Assignment. You can select how you want to assign IPv6 addresses
to the devices on the LAN (for example, your home network). You can select
either the Use DHCP Server or Auto Config option to assign IPv6 addresses.
Using a DHCP server might pass more information to LAN devices, but some IPv6
systems might not support the DHCv6 client function. Auto Config is selected by
default.
Use This Interface ID. You can enable this option and specify the interface ID you
want for the IPv6 address for the router’s LAN interface. If you do not specify an
ID here, the router will generate one automatically from its MAC address.
Auto Detect. If you are not clear about the IPv6 connection, select Auto Detect, and
let the router decide the correct type for you.
Enter the requested information:
Connection Type. This indicates the connection type detected.
Router’s IPv6 Address on WAN. This shows the IPv6 address acquired for the
router’s WAN (or Internet) interface. The number after the slash (/) is the length of
the prefix, which is also roughly indicated by the underline (_) under the IPv6
address.
Router’s IPv6 Address on LAN. This shows the IPv6 address acquired for the
router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also roughly indicated by the underline (_) under the IPv6 address.
IP Address Assignment. You can select how you want to assign IPv6 addresses
to the devices on the LAN (for example, your home network). You can select
either the Use DHCP Server or Auto Config option to assign IPv6 addresses.
Using a DHCP server might pass more information to LAN devices, but some IPv6
systems might not support the DHCv6 client function. Auto Config is selected by
default.
Use This Interface ID. You can enable this option and specify the interface ID you
want for the IPv6 address for the router’s LAN interface. If you do not specify an
ID here, the router will generate one automatically from its MAC address.
Advanced
82
LTE Broadband 11n Wireless Router MBR1515
•
DHCP. If your ISP indicates that your IPv6 connection is DHCP, select DHCP.
Enter the requested information:
User Class. Most users should not need to fill in this field, but if your ISP has
given you a specific host name, then enter it here.
Domain Name. This is not needed for most users. You can type the domain name
of your ISP. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, you would
type xxx.yyy.zzz as the domain name. If you have a domain name given to you by
your ISP, type it in this box. (For example, Earthlink Cable might require a host
name of home, and Comcast sometimes supplies a domain name.)
Note: This is the domain name for the IPv6 connection. The domain name
for the IPv4 connection is not specified here.
Router’s IPv6 Address on WAN. This shows the IPv6 address acquired for the
router’s WAN (or Internet) interface. The number after the slash (/) is the length of
the prefix, which is also roughly indicated by the underline (_) under the IPv6
address.
Router’s IPv6 Address on LAN. This shows the IPv6 address acquired for the
router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also roughly indicated by the underline (_) under the IPv6 address.
IP Address Assignment. You can select how you want to assign IPv6 addresses
to the devices on the LAN (for example, your home network). You can select
either the Use DHCP Server or Auto Config option to assign IPv6 addresses.
Using a DHCP server might pass more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function. Auto Config is selected
by default.
Use This Interface ID. You can enable this option and specify the interface ID you
want for the IPv6 address for the router’s LAN interface. If you do not specify an
ID here, the router will generate one automatically from its MAC address.
Advanced
83
LTE Broadband 11n Wireless Router MBR1515
•
PPPoE. If your ISP indicates that your IPv6 connection is PPPoE, select PPPoE.
Enter the requested information:
Login. This is usually the name that you use in your e-mail address. For example,
if your main mail account is JerAB@ISP.com, then put JerAB in this field. Some
ISPs (like Mindspring, Earthlink, and T-DSL) require that you use your full e-mail
address when you log in. If your ISP requires your full e-mail address, then type it
in the Login field.
Password. Type the password that you use to log in to your ISP.
Service Name. If your ISP provided a service name, enter it here. Otherwise, this
may be left blank.
Connection Mode. This is the setting specifies when the router should establish
the PPPoE connection. Currently the connection mode is always on in order to
provide a steady IPv6 connection. The router will never disconnect the
connection, and in case the connection is broken (for example, the cable/DSL
modem is turned off somehow), the router will bring up the connection right after
the PPPoE connection is available.
Router’s IPv6 Address on WAN. This shows the IPv6 address acquired for the
router’s WAN (or Internet) interface. The number after the slash (/) is the length of
the prefix, which is also roughly indicated by the underline (_) under the IPv6
address.
Router’s IPv6 Address on LAN. This shows the IPv6 address acquired for the
router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also roughly indicated by the underline (_) under the IPv6 address.
IP Address Assignment. You can select how you want to assign IPv6 addresses
to the devices on the LAN (for example, your home network). You can select
either the Use DHCP Server or Auto Config option to assign IPv6 addresses.
Advanced
84
LTE Broadband 11n Wireless Router MBR1515
Using a DHCP server might pass more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function. Auto Config is selected
by default.
•
Use This Interface ID. You can enable this option and specify the interface ID you
want for the IPv6 address for the router’s LAN interface. If you do not specify an
ID here, the router will generate one automatically from its MAC address.
Fixed. If your ISP indicates that your IPv6 connection is Fixed IP, select Fixed.
Enter the requested information:
Fixed. The fixed IPv6 connection is very rarely used. If you need this type of
connection, your ISP provides you with the IPv6 address configurations.
WAN Setup:
•
IPv6 Address/Prefix Length. This specifies the IPv6 address and prefix
length of the router’s WAN interface.
•
Default IPv6 Gateway. This specifies the IPv6 address of the default IPv6
gateway, which is supposed to be on the router’s WAN interface.
•
Primary/Secondary DNS Server. These specify the DNS servers that will
resolve IPv6 domain name records for you. If these fields are not specified,
the router uses the DNS servers configured for the IPv4 Internet connection
(on the Basic Settings screen).
•
IP Address Assignment. You can select how you want to assign IPv6
addresses to the devices on the LAN (for example, your home network). You
can select either the Use DHCP Server or Auto Config option to assign IPv6
addresses. Using a DHCP server might pass more information to LAN
devices, but some IPv6 systems might not support the DHCv6 client function.
Auto Config is selected by default.
LAN Setup:
•
IPv6 Address/Prefix Length. This setting specifies the IPv6 address and
prefix length of the router’s LAN interface.
Advanced
85
LTE Broadband 11n Wireless Router MBR1515
•
Pass Through. If your ISP explicitly indicates that your IPv6 connection is not DHCP,
PPPoE, or Fixed IP, or your ISP indicates that it is IPv6 auto config, select Pass
Through.
3. Click Apply to save the new settings to the router.
4. Click Cancel to discard any unsaved changes.
5. Click Status Refresh to update the screen and see the information about the current IPv6
connection.
Advanced
86
6.
Troubleshooting
This chapter gives information about troubleshooting your LTE Broadband 11n Wireless Router.
After each problem description, instructions are provided to help you diagnose and solve the
problem. For the common problems listed, go to the section indicated.
•
Is the router on?
Go to Basic Functioning on page 88.
•
Have I connected the router correctly?
Go to Basic Functioning on page 88.
•
I can’t access the router’s configuration with my browser.
Go to Troubleshooting Access to the Router Main Menu on page 90.
•
I’ve configured the router but I can’t access the Internet.
Go to Troubleshooting the ISP Connection on page 91.
•
I want to clear the configuration and start over again.
Go to Restoring the Default Configuration and Password on page 95.
87
LTE Broadband 11n Wireless Router MBR1515
Basic Functioning
After you turn on power to the router, the following sequence of events should occur:
1. When power is first applied, verify that the Power
LED is on.
2. After approximately 10 seconds, verify that:
a. The Power LED is still solid green. An amber light indicates the unit has failed its
power-on self-test (POST).
b. The Internet LED is lit.
c. The Wi-Fi radio LED is lit. The Wi-Fi radio is on by default.
d. The Ethernet LAN port LED is lit when any local ports are connected.
If a LAN port’s LED is lit, a link has been established to the connected device. If a LAN
port is connected to a 100 Mbps device, verify that the port’s LED is green. If the port
is 10 Mbps, the LED is amber.
e. The Ethernet WAN port LED is lit when the router is connected to a wired modem.
f.
The Signal LED is lit when the router has detected a mobile broadband signal.
• A blue LED indicates excellent coverage.
•
A green LED indicates good coverage.
•
An amber LED indicates marginal coverage.
If any of these conditions does not occur, refer to the following table.
LED
Power
Action
Power LED is off.
•
•
•
Power LED is
amber.
Make sure the power cord is correctly connected to your router, and
that the power supply adapter is correctly connected to a functioning
power outlet.
Check that you are using the power adapter supplied by NETGEAR for
this product.
If the error persists, you might have a hardware problem and should
contact Technical Support.
There is a fault within the router. Try to clear the fault as follows:
• Cycle the power to see if the router recovers.
• Clear the router’s configuration to factory defaults. This sets the router’s
IP address to 192.168.0.1. This procedure is explained in Restoring the
Default Configuration and Password on page 95.
If the error persists, you might have a hardware problem and should contact
Technical Support.
Troubleshooting
88
LTE Broadband 11n Wireless Router MBR1515
LED
Action
Internet Port Internet LED is off.
Be sure the SIM card you received is in the router. SIM cards from
other devices will not function in the router, and the this SIM card will
not function in other devices.
Internet LED is
amber.
The router cannot connect to the Internet. Check the Internet connection
option being used.
• For the mobile broadband connection option, check the Signal LED.
• For the Ethernet connection option, check the WAN LED.
Internet LED is
blinking amber and
green.
The Traffic Meter feature is enabled, and the limit set has been reached.
Wi-Fi LED is off.
The Wi-Fi radio has been turned off. If you want a Wi-Fi connection with the
router, push the Wi-Fi button to turn the Wi-Fi radio back on.
Wi-Fi LED is not
blinking.
If this LED does not blink when you are attempting to send data over the
Wi-Fi link, log in to the router menu using the Ethernet LAN connection and
check your router’s wireless (Wi-Fi) configuration.
LAN Ports
LAN LED is off.
If this LED does not light when an Ethernet connection is made, check the
following:
• Make sure that the Ethernet cable connections are secure at the router
and at the hub or workstation.
• Make sure that power is turned on to the connected hub or workstation.
WAN Port
WAN LED is off.
If this LED does not light when an Ethernet connection is made using the
Ethernet connection option, check the following:
• Make sure that the Ethernet cable connections are secure at the router
and at the modem.
• Make sure that power is turned on to the modem.
2G/3G
2G/3G LED is off.
The router cannot tell if the mobile broadband connection uses 2G or 3G
signals.
Signal
Signal LED is off or
amber.
If this LED does not light when the Mobile Broadband connection option is
used, check the following:
• Check with your ISP to ensure that there is good coverage in the area.
• Ensurethat your mobile broadband account is active.
• Ensure that the SIM card is inserted correclty into the router.
• Locate the router near the window or other area of the building. Make
sure that the Signal LED is lit, indicating there is mobile broadband
coverage with the router.
• Log in to the router menu and check the Internet configuration. Check
that the user name, password, and APN with ISP are set correctly. If
you use a PIN to connect to the Internet, make sure it is entered
correctly.
Wi-Fi
Troubleshooting
89
LTE Broadband 11n Wireless Router MBR1515
Troubleshooting Access to the Router Main Menu
If you are unable to access the router main menu from a computer on your local network,
check the following:
•
If you are using an Ethernet-connected computer, check the Ethernet connection
between the computer and the router as described in the previous section.
•
Make sure your computer’s IP address is on the same subnet as the router. If you are
using the recommended addressing scheme, your computer’s address should be in the
range of 192.168.0.2 to 192.168.0.254.
Note: If your computer’s IP address is shown as 169.254.x.x:
Recent versions of Windows and MacOS generate and assign an IP
address if the computer cannot reach a DHCP server. These
auto-generated addresses are in the range of 169.254.x.x. If your IP
address is in this range, check the connection from the computer to
the router, and reboot your computer.
•
If your router’s IP address was changed and you do not know the current IP address,
clear the router’s configuration to factory defaults. This will set the router’s IP address to
192.168.0.1. This procedure is explained in Restoring the Default Configuration and
Password on page 95.
•
Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using
Internet Explorer, click Refresh to be sure that the Java applet is loaded.
•
Try quitting the browser and launching it again.
•
Make sure that you are using the correct login information. The factory default login name
is admin, and the password is password. Make sure that Caps Lock is off when entering
this information.
If the router does not save changes you have made in the Web Man agement Interface,
check the following:
•
When entering configuration settings, be sure to click the Apply button before moving to
another screen or tab, or your changes are lost.
•
Click the Refresh or Reload button in the Web browser. The changes might have
occurred, but the Web browser might be caching the old configuration.
Troubleshooting
90
LTE Broadband 11n Wireless Router MBR1515
Troubleshooting the ISP Connection
Check these possible sources of trouble if you are having difficulty connecting to or browsing
the Internet.
Connecting to the Internet
If unable to connect to Internet, check the following:
1. The Internet account is active.
If your ISP has provided you with
a SIM card and you haven’t
inserted it into the SIM card slot on
the back of the router yet, do so
now.
2. Wireless broadband coverage is
available where the unit is located.
ld
eh
pla
3. Access the router main menu to
verify that the broadband settings
are correct. Check with your ISP if
you are unsure.
4. Check the location of the router.
a. Move the router closer to a window for better access to the Internet signal.
• A blue Signal LED indicates excellent coverage.
•
A green Signal LED indicates good coverage.
•
An amber Signal LED indicates marginal coverage.
•
An unlighted Signal LED indicates no coverage.
b. Maintain recommended minimum distances between NETGEAR equipment and
household appliances to reduce interference (see Interference Reduction Table on
page 105).
Troubleshooting
91
LTE Broadband 11n Wireless Router MBR1515
5. Using an external antenna for improved signal strength:
ld
eh
pla
a. Install an external antenna.
(The external antenna is an
optional accessory that you
can purchase.)
b. Clear the Use Internal Antenna
check box on the Mobile
Broadband Settings screen
and then click Apply.
c. Click Connect to connect to the
Internet.
Troubleshooting Internet Browsing
If your router can obtain an IP address but your computer is unable to load any Web pages
from the Internet:
•
The traffic meter is enabled, and the limit might have been reached.
By configuring the traffic meter not to block, you can resume Internet access. If you have
an usage limit, your ISP might charge you for the overage.
•
Your computer might not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www
addresses) to numeric IP addresses. Typically your ISP provides the addresses of one or
two DNS servers for your use. If you entered a DNS address during the router’s
configuration, reboot your computer and verify the DNS address. Alternatively, you can
configure your computer manually with DNS addresses, as explained in your operating
system documentation.
•
Your computer might not have the router configured as its TCP/IP router.
If your computer obtains its information from the router by DHCP, reboot the computer,
and verify the router address.
Troubleshooting
92
LTE Broadband 11n Wireless Router MBR1515
Troubleshooting a TCP/IP Network Using the Ping Utility
Most TCP/IP terminal devices and routers contain a ping utility that sends an echo request
packet to the designated device. The device then responds with an echo reply. You can
easily troubleshoot a TCP/IP network by using the ping utility in your computer.
Testing the LAN Path to Your Router
You can ping the router from your PC to verify that the LAN path to your router is set up
correctly.
¾
To ping the router from a PC running Windows 95 or later:
1. From the Windows toolbar, click the Start button, and select Run.
2. In the field provided, type ping followed by the IP address of the router, as in this example:
ping 192.168.0.1
3. Click OK.
You should see a message like this one:
Pinging  with 32 bytes of data
If the path is working, you see this message:
Reply from < IP address >: bytes=32 time=NN ms TTL=xxx
If the path is not working, you see this message:
Request timed out
If the path is not working correctly, you could have one of the following problems:
•
•
Wrong physical connections
Make sure that the LAN port LED is on. If the LED is off, follow the instructions in
Connecting to the Internet on page 91.
Check that the corresponding Link LEDs are on for your network interface card
and for the hub ports (if any) that are connected to your workstation and router.
Wrong network configuration
Verify that the Ethernet card driver software and TCP/IP software are both
installed and configured on your PC or workstation.
Verify that the IP address for your router and your workstation are correct and that
the addresses are on the same subnet.
Troubleshooting
93
LTE Broadband 11n Wireless Router MBR1515
Testing the Path from Your Computer to a Remote Device
After verifying that the LAN path works correctly, test the path from your PC to a remote
device.
1. From the Windows toolbar, click the Start button, and select Run.
2. In the Windows Run window, type:
ping -n 10 IP address
where IP address is the IP address of a remote device such as your ISP’s DNS server.
If the path is functioning correctly, replies as in the previous section are displayed. If you do
not receive replies:
•
Check that your PC has the IP address of your router listed as the default router. If the IP
configuration of your PC is assigned by DHCP, this information is not visible in your PC’s
Network Control Panel. Verify that the IP address of the router is listed as the default
router.
•
Make sure that the network address of your PC (the portion of the IP address specified by
the netmask) is different from the network address of the remote device.
•
Check that your cable or DSL modem is connected and functioning.
•
If your ISP assigned a host name to your PC, enter that host name as the account name
in the Basic Settings screen.
•
Your ISP could be rejecting the Ethernet MAC addresses of all but one of your PCs. Many
broadband ISPs restrict access by allowing only traffic from the MAC address of your
broadband modem, but some ISPs additionally restrict access to the MAC address of a
single PC connected to that modem. If this is the case, you must configure your router to
clone or spoof the MAC address from the authorized PC. See the LTE Broadband 11n
Wireless Router MBR1515 Installation Guide.
Troubleshooting
94
LTE Broadband 11n Wireless Router MBR1515
Problems with Date and Time
The email screen displays the current date and time of day. The LTE Broadband 11n
Wireless Router uses the Network Time Protocol (NTP) to obtain the current time from one of
several network time servers on the Internet. Each entry in the log is stamped with the date
and time of day. Problems with the date and time function can include the following:
•
Date shown is January 1, 2000.
Cause: The router has not yet successfully reached a network time server. Check that
your Internet access settings are configured correctly. If you have just completed
configuring the router, wait at least 5 minutes, and check the date and time again.
•
Time is off by one hour.
Cause: The router does not automatically sense daylight savings time. On the E-mail
screen, select or clear the Adjust for Daylight Savings Time check box.
Restoring the Default Configuration and Password
This section explains how to restore the factory default configuration settings, changing the
router’s admin password to password and the IP address to 192.168.0.1. You can erase the
current configuration and restore factory defaults in two ways:
•
Use the Erase feature (see Erasing the Configuration on page 52).
•
Press the Restore Factory Settings button on the bottom of the router for 6 seconds. Use
this method for cases when the administration password or IP address is not known.
The factory default settings are shown in Factory Default Settings on page 97.
Troubleshooting
95
A.
Supplemental Information
This appendix provides the following information:
•
Factory Default Settings
•
Technical Specifications
96
LTE Broadband 11n Wireless Router MBR1515
Factory Default Settings
Use the Restore Factory Settings button located on the bottom of your router to reset all
settings to their original factory default settings. This is called a hard reset. To perform a hard
reset, push and hold the Restore Factory Settings button for 6 seconds. Your router will
return to the factory configuration settings that are shown in the following table.
Feature
Router
login
Default Behavior
User login URL
http://www.routerlogin.net or http://www.routerlogin.com
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
WAN MAC address
Connection
WAN MTU size
Local
network
(LAN)
Firewall
Use default address
1500
Port speed
AutoSense
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
None
DHCP server
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
DMZ
Disabled
Time zone
PST for North America
Daylight saving time adjustment
Disabled
Inbound communication from the
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet)
Enabled (all)
Source MAC filtering
Disabled
Supplemental Information
97
LTE Broadband 11n Wireless Router MBR1515
Feature (continued)
Default Behavior (continued)
Mobile
Broadband
Internet Service Provider:
Bell Mobility
APN:
inet.bell.ca
Access Number:
*99#
PDP Type:
IP
Username:
none required
Wireless communication
Enabled
SSID name
See label on the bottom of router
Security
WPA-PSK/WPA2-PSK mixed mode
Broadcast SSID
Enabled
Transmission speed
Auto (maximum wireless signal rate derived from IEEE
Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors,
including volume of network traffic, building materials and
construction, and network overhead, lower actual data
throughput rate.)
Country/Region
Canada
RF channel
Auto
Operating mode
Up to 145 Mbps
Data rate
Best
Output power
Full
Access point
Enabled
Authentication type
Open system
Wireless Card Access List
All wireless stations allowed
WiFi
Supplemental Information
98
LTE Broadband 11n Wireless Router MBR1515
Technical Specifications
Technical Specifications
Network Protocol and Standards
Compatibility
TCP/IP, DHCP
Power adapter
•
•
North America: 120V AC, 60 Hz, input
12V DC @ 1.5A output
Physical specifications
•
•
Dimensions: 6.8 in. x 5.03 in. x 1.28 in. (173 mm x 128 mm x 33 mm)
Weight: 0.65 lbs. without the stand (0.29 kg)
Environmental Specifications
•
•
Operating temperature: 0° to 40° C (32º to 104º F)
Operating humidity: 90% maximum relative humidity, noncondensing
Electromagnetic Emissions
FCC Part 15 Class B; IC; EN 55 022 (CISPR 22), Class B
Interface Specifications
•
•
LAN: 10BASE-T or 100BASE-Tx, RJ-45
WAN: 10BASE-T or 100BASE-TX, RJ-45
Antenna Connection (Optional)
•
R-TNC connector
Supplemental Information
99
B.
Wall-Mounting
This appendix provides instructions for wall-mounting your router.
Your router’s location can affect wireless connections. For example, the thickness and number of
walls the wireless signal needs to pass through might limit its range. For best results, place your
router:
¾
•
Near an AC power outlet, close to computers you plan to connect with Ethernet cables,
and near locations where you use wireless computers. For best signal strength, the
router should be within line of sight of your wireless devices.
•
In an elevated location, keeping the number of walls and ceilings between the router and
your wireless computers to a minimum.
•
Away from electrical devices that are potential sources of interference, such as ceiling
fans, home security systems, microwaves, or the base for a cordless phone.
To wall-mount the router:
1. Drill holes in the wall where you will wall-mount the router.
Holes should be 9.5 in.
(24.1 cm) center to center.
100
LTE Broadband 11n Wireless Router MBR1515
2. Install wall anchors in the holes.
Use pan head Phillips wood screws, 3.5 x 20 mm (diameter x length, European) or #6
type screw, 1 inch long (U.S.).
3. Insert screws into the wall anchors, leaving 3/16 in. (0.5 cm) of each screw exposed.
ld
eh
pla
Wall-Mounting
101
LTE Broadband 11n Wireless Router MBR1515
4. For best wireless performance, position the wireless antennas as shown.
ld
Wall-Mounting
102
C.
Compliance Notification
NETG EAR Wireless Routers, G ateways, AP’s
Regulatory Compliance Information
Note: This section includes user requirements for operating this product in accordance with National laws for usage
of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable
requirements may result in unlawful operation and adverse action against the end-user by the applicable National
regulatory authority.
Note: This product's firmware limits operation to only the channels allowed in a particular Region or Country.
Therefore, all options described in this user's guide may not be available in your version of the product.
FCC Requirements for Operation in the United States
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas only.
Any product changes or modifications will invalidate all applicable regulatory certifications and approvals.
FCC Guidelines for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Declaration of Conformity
We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the
LTE Broadband 11n Wireless Router MBR1515 complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is
subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
FCC Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following methods:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
103
LTE Broadband 11n Wireless Router MBR1515
FCC Caution
• Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
• For product available in the USA market, only channel 1~11 can be operated. Selection of other channels is not
possible.
• This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or
transmitter.
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (LTE Broadband 11n Wireless Router MBR1515) does not exceed the Class B limits for
radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian
Department of Communications.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada
Industry Canada
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE: Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
Caution:
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
NOTE IMPORTANTE: Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.
GPL License Agreement
GPL may be included in this product; to view the GPL license agreement go to
ftp://downloads.netgear.com/files/GPLnotice.pdf.
For GNU General Public License (GPL) related information, please visit
http://support.netgear.com/app/answers/detail/a_id/2649.
Compliance Notification
104
LTE Broadband 11n Wireless Router MBR1515
Interference Reduction Table
The table below shows the Recommended Minimum Distance between NETGEAR equipment and household
appliances to reduce interference (in feet and meters).
Household Appliance
Recommended Minimum Distance
(in feet and meters)
Microwave ovens
30 feet / 9 meters
Baby Monitor - Analog
20 feet / 6 meters
Baby Monitor - Digital
40 feet / 12 meters
Cordless phone - Analog
20 feet / 6 meters
Cordless phone - Digital
30 feet / 9 meters
Bluetooth devices
20 feet / 6 meters
ZigBee
20 feet / 6 meters
Compliance Notification
105
Index
Numerics
ethernet broadband settings 18
2G/3G LED 9
factory defaults 9, 52
Firmware Upgrade Assistant 12
flash memory 55
access 52
restrict by MAC address 61
restricting by MAC address 26
router password 52
access control 61
administrator login 53
attached devices 50
auto-detect connection 13
interference 25
internet port LED 9
Internet traffic statistics 80
IP addresses, auto-generated 90
IPv6 connections, configuring 81
blocking
keywords 40
services 42
sites 40
broadband settings 14
keywords, blocking 40
LAN
setup 67
LED descriptions 8
log files, save 38
log in 11
log messages 39
log out 11
login not required 20
login required 18
logs, sending 44
compliance, adapters 103
configuration backup 51
connection mode 13
connection status 49
control buttons 8
date and time 95
daylight savings time 43, 95
Denial of Service (DoS) 40
DHCP 11, 68
diagnostics 53
DMZ server 66
Dynamic DNS, configure 75
MAC address 94
location of 62
restricting access 26
manual configuration 14
metric (static route) 77
mobile broadband settings 16
modem unlock code 34
mounting modem router on wall 100
email notification 37, 44
106
LTE Broadband 11n Wireless Router MBR1515
network management 45
Network Time Protocol (NTP) 43, 95
TCP/IP network, troubleshooting 93
technical support 2
time of day 95
time zone 43
timeout 53
time-stamping 43
trademarks 2
traffic counter 80
traffic meter 80
traffic status 80
troubleshooting 87
trusted host 41
password
change 52
restoring 95
placement 25
port forwarding 64
port triggering 64
ports
LAN 9
WAN 9
power LED 9
Push ’N’ Connect 30
Universal Plug and Play (UPnP) 78
update firmware 12
Quality of Service (QoS) 71
wall-mounting modem router 100
WAN
setup 65
WAN port LED 9
websites, blocking 40
WEP
26
configure 28
Wi-Fi
button 8
LED 9
WINS 69
wireless
access control 61
configuration 24
repeat function 63
security 26
settings 27
WPA
26, 29
configure 29
WPA + WPA2 29
WPA2
26, 29
configure 29
WPS
8, 30
PIN entry 31
unsupported 32
range 25
remote management 77
reserved IP addresses 69
restore factory defaults 9, 52
restricted access 61
router
access 52
assembly 7
back panel 10
front panel 8, 88
label 10
logs 37
status 46
show statistics 48
signal quality 9
SIM
modem unlock 34
PIN Code 33
settings 57
SMS (Short Message Service), configuring 59
SMTP 44
static routes 76
status LEDs 8, 88
syslog 38
107

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : NETGEAR, Inc.
Create Date                     : 2012:07:10 15:50:07+08:00
Keywords                        : LTE, Broadband, 11n, Wireless, Router, MBR1515
Modify Date                     : 2012:07:10 17:25:20+08:00
Subject                         : LTE Broadband 11n Wireless Router MBR1515
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : FrameMaker 10.0.2
Metadata Date                   : 2012:07:10 17:25:20+08:00
Format                          : application/pdf
Description                     : LTE Broadband 11n Wireless Router MBR1515
Title                           : LTE Broadband 11n Wireless Router MBR1515 User Manual
Creator                         : NETGEAR, Inc.
Producer                        : Acrobat Distiller 9.5.1 (Windows)
Copyright                       : ? 2012
Document ID                     : uuid:a1526369-dcc5-4207-842b-6b934b93d7ae
Instance ID                     : uuid:23a160f5-28ad-4e8e-813c-256b4a9d28f2
Page Count                      : 107

EXIF Metadata provided by EXIF.tools