Netgear orporated 12200195 Powerline 200 WiFi Range Extender, Powerline 500 WiFi Range Extender User Manual

Netgear Incorporated Powerline 200 WiFi Range Extender, Powerline 500 WiFi Range Extender

user manual

Download: Netgear orporated 12200195 Powerline 200 WiFi Range Extender, Powerline 500 WiFi Range Extender User Manual
Mirror Download [FCC.gov]Netgear orporated 12200195 Powerline 200 WiFi Range Extender, Powerline 500 WiFi Range Extender User Manual
Document ID1762690
Application IDlj/TG1QEy35Wu2BqVEg/Ig==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize160.46kB (2005689 bits)
Date Submitted2012-08-09 00:00:00
Date Available2012-08-09 00:00:00
Creation Date2012-07-18 12:06:05
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2012-07-18 16:02:22
Document TitleXAVN2001 Powerline AV 200 Wireless-N Extender User Manual
Document CreatorFrameMaker 9.0
Document Author: NETGEAR, Inc.

Powerline 500 WiFi Access
Point (XWN5001)
User Manual
350 East Plumeria Drive
San Jose, CA 95134
USA
July 2012
202-11003-01
v1.0
This manual is for certification purposes only.
The art, screen captures, and descriptions
might vary from the actual device.
Powerline 500 WiFi Access Point (XWN5001)
©2012 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means without the written permission of NETGEAR, Inc.
Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online,
visit us at http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries): Check the list of phone numbers at
http://support.netgear.com/app/answers/detail/a_id/984.
Trademarks
NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto Uplink, X-RAID2, and NeoTV are
trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista are
registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or
trademarks of their respective holders.
Statement of Conditions
To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes
to the products described in this document without notice. NETGEAR does not assume any liability that may occur
due to the use, or application of, the product(s) or circuit layout(s) described herein.
Contents
Chapter 1
Getting Started
Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
LED and Feature Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
How the Powerline AV 500 Access Point Fits in Your Network . . . . . . . . . . 7
Set Up the Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Set Up a New Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Add the Powerline Access Point to an Existing Powerline Network . . . . . 9
Set Up the Access Point Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . 10
Method A: Use the Powerline Utility for Wireless Setup . . . . . . . . . . . . . 10
Method B: Use the WPS Button for Wireless Setup . . . . . . . . . . . . . . . . 11
Join the Powerline Access Point Wireless Network . . . . . . . . . . . . . . . . . . 12
Powerline Network Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Use the Security Button to Set the Encryption Key . . . . . . . . . . . . . . . . . . 13
Set the Encryption Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Chapter 2
Powerline Utility
Install the Powerline Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Powerline Utility Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Security Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Change the Name of a Powerline Device. . . . . . . . . . . . . . . . . . . . . . . . . . 18
Turn LEDs Off or On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Set the Powerline Encryption Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reset a Device to Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Add a Device to the Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Set Up Quality of Service (QoS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Advanced Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Chapter 3
Troubleshooting
Basic Functioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
If You Do Not See All Your Devices with the Powerline Utility . . . . . . . . . . 29
Appendix A
Supplemental Information
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Appendix B
Notification of Compliance
Index
1.
Getting Started
This chapter describes your Powerline 500 WiFi Access Point (XWN5001), and how your
adapters can fit into a home network. It also explains the security features and how to customize
the encryption key for added security. For more information about the topics covered in this
manual, visit the support website at http://support.netgear.com.
This chapter includes the following sections:
•
Hardware Features
•
How the Powerline AV 500 Access Point Fits in Your Network
•
Set Up the Powerline Network
•
Powerline Network Security
•
Set Up the Access Point Wireless Network
•
Join the Access Point Wireless Network
•
Use the Security Button to Set the Encryption Key
•
Use the Security Button to Set the Encryption Key
•
Set the Encryption Key
Powerline 500 WiFi Access Point (XWN5001)
Hardware Features
The package includes a Powerline 500 WiFi Access Point (XWN5001), a Resource CD, and
an Ethernet cable.
Ethernet cable
Powerline 500 WiFi Access Point
Figure 1. Package contents
The following illustration shows the front and side panels of the XWN5001:
LEDs
Security
button
Ethernet
port
Reset
button
On/Off
button
Figure 2. Powerline 500 WiFi Access Point (XWN5001)
Getting Started
Powerline 500 WiFi Access Point (XWN5001)
LED and Feature Descriptions
The following table describes the status LEDs on the Powerline 500 WiFi Access Point.
Table 1. LED descriptions
Item
Description
Power
LED
• Solid green. The electrical power is on.
• Blinking green.The adapter is in the process of restarting or setting up security.
• Amber. Power saving mode. The unit enters power saving mode if the Ethernet port is not
linked for more than 10 minutes.
• Off. There is no electrical power, or power has been turned off through the Powerline
Utility.
Powerline LED
• Solid. The adapter is connected to a Powerline network.
• Blinking. The adapter is sending or receiving data.
• Off. The adapter has not found any other compatible Powerline devices using the same
encryption key, or has been turned off through the Powerline Utility.
The Pick A Plug feature lets you pick the electrical outlet with the strongest link rate, indicated
by the color displayed by the LED:
Green. Link rate > 80 Mbps
(Best) - Good for HD video
Ethernet LED
Amber. Link rate > 50, < 80
Mbps
(Better) - Good for SD Video
Red. Link rate < 50 Mbps
(Good) - Good for data
• Solid. The Ethernet port is linked, but there is no activity.
• Blinking. There is traffic on the Ethernet port.
• Off. There is no Ethernet connection, or it has been turned off through the Powerline
Utility.
Buttons
Three buttons are located on the side of the Access Point:
•
Reset. Press the Reset button for 1 second, and then release it to return the Powerline
adapter to its factory default settings.
•
Security. After you plug in your new AV adapters, press the Security button for 2
seconds on both of the AV adapters. You have to press both buttons within 2 minutes.
The Security button does not work in power saving mode. The unit enters power saving
mode if the Ethernet port is idle (not linked) for more than 10 minutes.
•
On/Off. This button is used for wireless setup with WPS. See Method B: Use the WPS
Button for Wireless Setup on page 12.
Ethernet Port
Plug one end of the Ethernet cable that comes with the Powerline 500 WiFi Access Point
(XWN5001) into this port and the other end either into your router, or into the computer or
another peripheral device.
Getting Started
Powerline 500 WiFi Access Point (XWN5001)
Product Label
The product label shows unique details specific to your adapter. The product label is located
on the back of the adapter. The label contains the following information.
•
Model number
•
MAC address
•
Device password
•
Serial number
How the Powerline AV 500 Access Point Fits in Your
Network
You can use one or more Powerline 500 WiFi Access Points to extend your home network
anywhere in your house using your electrical power lines.
A Powerline network consists of two or more compatible Powerline devices that
communicate with each other. One of the Powerline devices is connected with an Ethernet
cable to your router so that the Powerline network is linked to your local area network (LAN).
That way each Powerline device can communicate with the router and use its Internet
connection.
The following illustration shows an existing Powerline network with one Powerline device in
Room 1, a second Powerline device in Room 2, and an XWN5001 Powerline access point in
Room 3:
Room 1
Room 2
Powerline
Room 3
Powerline
Figure 3. Powerline access point connected to the Powerline network and wireless network
Getting Started
Powerline 500 WiFi Access Point (XWN5001)
To form a Powerline network you need at least two compatible Powerline devices (including
the Powerline 500 WiFi Access Point).
For best performance, plan the location of your Powerline devices:
•
Use an electrical outlet that is not controlled by a wall switch to avoid someone
unknowingly turning off the power to the outlet.
•
Do not plug in Powerline products to a power strip, extension cord, or surge protector as
this might prevent them from working correctly or reduce the network performance.
•
Avoid plugging Powerline products into electrical outlets located near an appliance that
uses a lot of power, such as a washer or dryer, or a refrigerator. This could potentially
prevent the adapters from working correctly, or reduce network performance.
Set Up the Powerline Network
You can set up a Powerline network that includes the Access Point, or you can add the Access
Point to an existing Powerline network.
Set Up a New Powerline Network
Different Powerline adapter models can share the network. All NETGEAR Powerline AV
products (models XAV101, XAV1004, XAV2001, XAV2501, and XAVN2001) are compatible.

To set up a new Powerline network:
1. Make sure that your home router is up and running and that Ethernet wired connections
are working.
2. Install the first Powerline adapter based on the
installation instructions that came in the package.
Plug a compatible NETGEAR Powerline adapter
(sold separately) into a wall outlet near your
router, and connect it to the LAN port on your
router using an Ethernet cable.
3. For convenience during setup, plug the Access
Point into a wall outlet near your router.
Getting Started
Powerline 500 WiFi Access Point (XWN5001)
4. Connect a computer to the Access Point for
initial setup.
Use the supplied Ethernet cable to connect
the Access Point to an Ethernet port on a
computer.
The Powerline devices attempt to detect
each other and form a Powerline network.
This could take a few minutes.
5. Plug any additional Powerline devices you
are using into power outlets near the other
computers and devices to be included in
your Powerline network.
6. Wait for each Powerline adapter or access
point to be recognized by the Powerline network.
The Power, Ethernet, and Powerline LEDs should turn on. This could take as little as 5
seconds, or up to 80 seconds. If the Powerline LEDs are green or amber, the devices are
successfully connected. A red LED indicates a weak link rate. In this case, move the
adapter or access point to another electrical outlet with a better connection.
7. Set up the Access Point wireless network as explained in Set Up the Extender Wireless
Network on page 10.
Add the Access Point to an Existing Powerline Network
Your existing Powerline network needs to have two or more compatible Powerline devices
that communicate with each other. (models XAV101, XAV1004, XAV2001, XAV2501, and
XAVN2001). One of these Powerline devices has to be cabled with Ethernet to your router so
that the Powerline network is linked to your local area network (LAN).

To add the Access Point to an existing Powerline network:
1. If you used the Security buttons or the Powerline Utility to secure your Powerline
network, press the Reset button on each Powerline device to return it to its factory
settings.
This is the quickest way to allow your new Powerline 500 WiFi Access Point to
communicate with the other Powerline devices.
Getting Started
Powerline 500 WiFi Access Point (XWN5001)
2. Connect a computer to the Access Point for
initial setup.
Use the supplied Ethernet cable to connect
the Access Point to an Ethernet port on a
computer.
3. For convenience during setup, plug the
Access Point into an electrical outlet near
your router.
The Access Point attempts to detect the
other compatible Powerline devices in your
network and join the Powerline network.
This could take a few minutes.
4. Check the Powerline LEDs to make sure
that the Powerline devices are
communicating with each other. If the LEDs are green or amber, the devices are
successfully connected. A red LED indicates a weak link rate. In this case, move the adapter
or access point to another electrical outlet with a better connection.
5. Set up the Access Point wireless network as explained in Set Up the Extender Wireless
Network on page 10.
Set Up the Access Point Wireless Network
You need to set up the access point so that it can join your wireless network. To do this you
can use either the Powerline Utility or Wi-Fi Protected Setup (WPS).
•
If your router does not have WPS, or you are not sure, use Method A.
•
If your router does have WPS, use Method B.
Method A: Use the Powerline Utility for Wireless Setup

To set up your Access Point wireless network:
1. Download and install the Powerline Utility on your computer.
2. Temporarily connect your computer to the Ethernet port on the XWN5001.
Getting Started
10
Powerline 500 WiFi Access Point (XWN5001)
3. On the Powerline Utility screen, right-click the XWN5001 icon.
4. Select Wireless Configuration in the pop-up menu..
5. Enter the wireless settings.
Note: You can access advanced wireless settings by clicking the IP
address at the bottom of the Wireless Setting screen. The login and
password are admin and password.
Getting Started
11
Powerline 500 WiFi Access Point (XWN5001)
Method B: Use the WPS Button for Wireless Setup
You can use this method if you have a wireless router, or modem router with a WPS (Wi-Fi
Protected Setup) button. The WPS button might be labeled WPS, or it could look similar to
or

To use WPS to set up your Access Point wireless network:
1. Push the WPS button on the wireless client.
2. Push and hold the Security button on the wireless access point for about 2 seconds and release
it. The Wireless LED starts flashing.
When the Wireless LED stops flashing, the wireless pairing is done and the wireless device is
securely connected to the XWN5001 Wireless Access Point.
Note: This method pairs the XWN5001 with your wireless client, and at the same
time secures the connection with a random passphrase.
3. Connect your wireless device to the XWN5001. Connect a laptop, table, or smart phone to the
XWN5001 WiFi access point to gain access to the Internet.
a. Launch the application on your wireless client (laptop, tablet, or smart phone).
b. Refresh the WiFi network list to see the network SSID list.
c. Connect to the WiFi network SSID NETGEAR_EXT or the one you configured in
step 4, Method A.
Getting Started
12
Powerline 500 WiFi Access Point (XWN5001)
Join the Access Point Wireless Network
Use one of these methods to connect other wireless devices (such as a laptop, game
console, and so on), to your network through the Access Point.

To join the wireless network using a WPS button:
1. Press the WPS button on your wireless computer or device.
2. Press the On/Off button on the Access Point about 2 seconds, until the Wireless LED starts
flashing, then release it.
When the Wireless LED stops flashing, the wireless device is securely connected to the
XWN5001 Access Point.

To join the wireless network without a WPS button:
If your wireless device does not have a WPS button, you need to use the software that
manages your wireless connections for your wireless device and manually enter the wireless
settings to connect to the access point.
Powerline Network Security
A Powerline network consists of two or more Powerline adapters using the same network
encryption key. Securing your network is crucial. By encrypting the information you send over
the Powerline network, you help to keep it secure from hackers. If you do not set up security
on your network, anyone nearby with a Powerline network can potentially use their
connection to gain access to your network and information you send over the Internet. This is
especially relevant in settings such as apartment buildings, office buildings, dorm rooms, and
other more populated areas.
Powerline devices connected to the same network have to use an identical encryption key in
order to communicate with each other. The security used by Powerline network is similar to
the SSID and encryption keys used in wireless networks.
There are two ways to secure your Powerline network.
•
Use the Security button located on the adapter to automatically generate a random
encryption key. See Set the Encryption Key.
•
Use the Powerline Utility to configure your Powerline network with an encryption key that
you specify. If you are already using Powerline or HomePlug devices, then you will need
to use the Powerline Utility. If not already installed, the Powerline Utility should be
installed on your computer. See Install the Powerline Utility on page 16.
For information about using the Powerline Utility to configure Powerline security or to
prioritize Powerline network traffic using the Quality of Service (QoS) feature, see
Chapter 2.
To return the XWN5001 to its factory default settings, press its Reset button for 1 second.
Getting Started
13
Powerline 500 WiFi Access Point (XWN5001)
Use the Security Button to Set the Encryption Key
Note: An adapter can generate a private key only once. If you want to
replace a private key, first reset the adapters to their factory settings.
To do this either press the Reset button for 1 second, then release,
or use the Powerline Utility factory defaults feature (see Reset a
Device to Factory Settings on page 15).
You can use the Security button to change the default encryption key and set a private
encryption key instead. The default encryption key is HomePlugAV.

To set the encryption key:
1. Verify that all the Powerline adapters to be configured are plugged in.
CAUTION:
Do not press the Security button on the Powerline adapter until installation
is complete and all adapters on your network are plugged in and
communicating with each other. Pressing the Security button too soon can
temporarily disable Powerline communication. If this should occur, reset
the Powerline adapter to its factory default settings (press the Reset
button for 1 second, then release).
2. Press the Access Point Security button for 2 seconds.
• The Power LED starts blinking after you release the button.
•
The adapter automatically creates a new, randomly generated network encryption key
that each Powerline adapter on the network will use.
At this point, the other adapters in your network cannot communicate with each other.
3. Within 2 minutes of pressing the Security button on the Access Point, press the Security
button on the second adapter for 2 seconds.
In order to pair the devices, you need to press both buttons within 2 minutes.
This securely configures your Powerline network with the same network encryption key.
4. If your network has more than two adapters, press the Security button on the next adapter
for 2 seconds, and then push the Security button on any additional adapters in your network
for 2 seconds. The adapters retain security settings even if they are unplugged.
Getting Started
14
Powerline 500 WiFi Access Point (XWN5001)
Set the Encryption Key
You can use the Security button to change the default encryption key and set a private
encryption key instead. The default encryption key is HomePlugAV.
Note: Before you change the encryption key, you need to install the
Powerline adapters and get them up and running. Otherwise, they
might not be able to communicate with each other.

To set a private encryption key:
1. Verify that all the Powerline devices to be configured are plugged in.
2. On the first Powerline device, press its Security button for 2 seconds.
The Power LED starts blinking after you release the button.
The Powerline device automatically produces a new, randomly generated network
encryption key that each Powerline device will use.
At this point, the other Powerline devices in your network cannot communicate with each
other.
3. Within 2 minutes of pressing the Security button on the first adapter, press the Security
button on the second Powerline device for 2 seconds.
In order to pair the devices, you must press both buttons within 2 minutes.
This securely configures your Powerline network with the same network encryption key.
4. If your network has more than two Powerline devices, press the Security button on the
additional Powerline device for 2 seconds, then press the Security button on any additional
Powerline devices in your existing network for 2 seconds. Press both buttons within 2
minutes. The Powerline devices retain security settings even if they are unplugged.
Note: A Powerline device can generate a private encryption key only once
unless you reset it. To start over, first reset the adapter back to its
factory defaults, and then press its Reset button for 1 second to
restore its factory settings.
Getting Started
15
2.
Powerline Utility
This chapter explains how to install and use the Powerline Utility. The Powerline Utility works
with many Powerline AV products. NETGEAR Powerline models XAV1004, XAV2001, and
XAVN2001 are compatible and can share the same Powerline network.
You can use the Powerline Utility to access a local Powerline device that is connected to your
computer with an Ethernet cable and also to access remote Powerline devices. Remote devices
are on the Powerline network, but are not directly cabled to the computer on which you are using
the Powerline Utility.
You can use the NETGEAR Powerline Utility to:
•
Change the name of a Powerline device
•
Turn LEDs on or off
•
Set encryption keys
•
Set up Quality of Service (QoS)
•
Restore a device to default configuration settings
This chapter includes the following sections:
•
Install the Powerline Utility
•
Powerline Utility Screen
•
Change the Name of a Powerline Device
•
Turn LEDs Off or On
•
Set the Powerline Encryption Key
•
Reset a Device to Factory Settings
•
Add a Device to the Powerline Network
•
Set Up Quality of Service (QoS)
•
Wireless Settings
•
Advanced Wireless Settings
15
Powerline 500 WiFi Access Point (XWN5001)
Install the Powerline Utility
This utility allows you to set your own unique Powerline network encryption key, and prioritize
traffic passing through your Powerline network.
All devices on a Powerline network can be managed from one computer. If you add another
Powerline device to a Powerline network, you can install the Powerline Utility on the
computer connected locally to the new adapter, or open the utility on the computer originally
used to set up the Powerline network encryption key. You can use any computer to manage
the network, but this procedure assumes that you are working from the computer that is
connected to a Powerline adapter.

To install the Powerline Utility:
The Powerline Utility is a free download available from the NETGEAR support website.
1. Launch an Internet browser, and visit
http://support.netgear.com/app/products/model/a_id/16189.
2. Click the Downloads tab, and then click on the utility that you want to download.
3. Scroll down to display the download instructions:
4. Click the Click here to download button, and download the utility to your computer.
5. Run the file that you downloaded, and follow the wizard prompts to install the Powerline
Utility. Click Finish to complete the wizard.
The Powerline Utility shortcut icon displays on your desktop.
6. There are two ways to launch the Powerline Utility:
• Click this icon located on your desktop.
•
Select Start > Programs > NETGEAR > NETGEAR Powerline Utility.
Powerline Utility
16
Powerline 500 WiFi Access Point (XWN5001)
Powerline Utility Screen
When launched, the Powerline Utility opens to a screen that shows all the devices in your
Powerline network.
•
Click the image of the device that you want to manage.
•
If all devices are not shown, click the Refresh button to update the screen.
•
The Information box at the bottom of the screen provides tips and information for using
this screen.
Security Icon
You can click the Security icon
on the Powerline Utility main screen to go to the Security
screen or the QoS (Quality of Service) screen:
Powerline Utility
17
Powerline 500 WiFi Access Point (XWN5001)
Change the Name of a Powerline Device
Powerline devices are identified by their model number and name. Any Powerline devices
that are plugged in and connected are detected by the Powerline Utility, and are shown on
the Powerline Utility main screen. If no name has been assigned to a Powerline device, it is
shown as un-named.

To name a Powerline device in your Powerline network:
1. From the Powerline Utility main screen, click the device you want to name, and the
following pop-up menu displays:
2. Select Device Name. The Powerline Utility responds that connectivity will be temporarily lost
if you continue.
3. Click OK. The following screen displays:
4. Enter a new name for the Powerline device, and click OK.
Powerline Utility
18
Powerline 500 WiFi Access Point (XWN5001)
Turn LEDs Off or On
For each device in your Powerline network, you can turn the LEDs off or on. This feature is a
toggle. You can turn off LEDs if they are on, or turn them on if they are currently turned off.

To turn the LEDs off or on:
1. On the Powerline Utility main screen, click the Powerline device icon.
2. On the pop-up menu, select Turn LED off.
A screen displays advising you that connectivity will be temporarily lost while the LEDs are
being reset.
Set the Powerline Encryption Key
Powerline devices that share the same Powerline network have to use the same encryption
key. The factory default encryption key is HomePlugAV.
In locations such as apartment buildings or office buildings, others might share the same
electrical power lines that you use for your Powerline network. To protect your Powerline
network from unwanted access, you can customize the encryption key for your Powerline
devices. Make sure that you set up exactly the same encryption key for all of your Powerline
devices so that they can communicate with each other.
You use the Security screen in the Powerline Utility to set encryption keys. If you customize
the encryption key and then forget what it is, you can return your Powerline devices to their
factory default Powerline encryption key of HomePlugAV.

To set the encryption key:
1. On the Powerline Utility main screen, click the Powerline device icon or the Security
icon
Powerline Utility
19
Powerline 500 WiFi Access Point (XWN5001)
The top section of the Security screen shows information about each device that the
Powerline Utility detects.
•
Device Name. This lists the Powerline devices detected on the network after the
utility completes a scan for devices. The device name is initially set by the utility, but
you can change it to a descriptive name such as Office or Master Bedroom.
•
Model. This identifies the model number of the Powerline adapter.
•
MAC Address. The MAC address for the Powerline device. This is also on the
product label, which might not be visible when the device is plugged in.
•
Device Password. To change settings for a remote Powerline device, you have to
enter its password. The device password is located on the product label.
2. Select the check box for each device for which you want to set the encryption key.
3. In Step 2 on your screen, select the option that you want:
• Create a new Encryption Key. To set your own network encryption key, type your
network encryption key in the field.
•
Use default Encryption Key. When you select this option, the factory default
encryption key automatically displays in the field. The default network encryption key
is HomePlugAV.
Note: Before you can reset the encryption key for a remote device, you have
to enter its password. The password is printed on the product label located on
the back of the adapter.
4. Click the Apply Security to Selected Devices button.
When you are finished setting the encryption key, the utility displays a message indicating
that the operation was successful.
5. Click OK.
Reset a Device to Factory Settings
This option returns the network encryption key to its factory default of HomePlugAV.
Note: If you customized your network encryption key, the local Powerline
device is disconnected from the network when you reset it to the
factory defaults. To avoid this problem, reset all remote devices
before you reset the local device.
Powerline Utility
20
Powerline 500 WiFi Access Point (XWN5001)

To reset a device to its factory settings:
1. On the Powerline Utility main screen, click the Powerline device icon. The pop-up menu
displays:
2. Select Factory Reset. A message displays asking you to confirm the reset.
3. Click OK to reset the device. A message indicates whether or not the operation succeeded.
Add a Device to the Powerline Network
If you are adding a device to a Powerline network, and the network encryption key has been
left at its default setting, all you need to do is plug the new device into a power outlet.
If the network encryption key has been customized, there are two ways to set the security:
•
You can use the Security button to add the new device to your network. See Use the
Security Button to Set the Encryption Key on page 8.
•
You can use the Powerline Utility to add the new device to the network, as described in
the following sections.
The procedure for setting the network encryption key depends on whether you use the
Powerline Utility on a computer connected directly to the new Powerline adapter (local) or a
different Powerline adapter (remote).

To add a Powerline device from a local computer:
1. Plug the Powerline adapter into an available AC power outlet.
2. Use the provided cable to connect the Powerline device to an Ethernet port on the
computer.
3. Start the Powerline Utility, click the Refresh button, and wait for the utility to detect the new
device.
4. Click the device, and select Security from
the menu.
5. Set the encryption key for the device
(see Set the Powerline Encryption Key on
page 19).
Verify that the devices in the Powerline network
are in the device list by clicking the Refresh
button. It might take a minute or two for all
devices in the network to be detected.
6. Select QoS (Quality of Service).
Powerline Utility
21
Powerline 500 WiFi Access Point (XWN5001)
Wireless Settings
You can use the Powerline Utility to view the current wireless settings, or to change them. On
the Powerline Utility main screen, use the mouse to move the pointer over the picture of the
XWN5001. A pop-up displays the wireless settings as shown in the following figure:

To change the wireless settings for your XWN5001 adapter:
1. From the Powerline Utility main screen, click the XWN5001, and the following pop-up
menu displays:.
Powerline Utility
22
Powerline 500 WiFi Access Point (XWN5001)
2. Select Wireless Settings. A screen similar to the following displays:
3. In the field provided enter the network name that you want to use for the access point
network (the network broadcast from the XWN5001 Access Point).
4. If you want to change the wireless security, select a setting from the Wireless Security Type
drop-down list. Enter a passphrase (network password).
5. Click Apply so that your changes take effect.

To search for your NETGEAR router:
1. Click the Search my NETGEAR Router button.
The Access Point detects your wireless network and displays the settings.
2. Confirm that you want to use the same wireless network settings for the Access Point.
Powerline Utility
23
Powerline 500 WiFi Access Point (XWN5001)
Advanced Wireless Settings
You can use the Advanced Wireless Security screen to change wireless settings including the
wireless mode and channel.

To change the advanced settings for the Access Point wireless network:
1. From the Wireless Setting screen, click the link for wireless settings.
The advanced Wireless Settings screen displays:
2. Change the wireless settings for the network broadcast by the Access Point:
• Name (SSID). The wireless network name. You can type in a new name to customize
your access point network.
•
Region. The country or region where the Access Point is located.
•
Channel. The wireless channel for the network.
•
Mode. The wireless mode.
Powerline Utility
24
Powerline 500 WiFi Access Point (XWN5001)
3. In the Security Options section of the screen, select the type of wireless security that you
want to use on your network.
• None. This is an open wireless network. Any wireless computer or device is allowed
to join this network.
•
WEP. WEP is an older standard, and is less secure than WPA or WPA2. WEP uses
encryption keys and data encryption for data security. You can select 64-bit or 128-bit
encryption.
•
WPA-PSK [TKIP]. WPA is more secure than WEP. When using wireless computers or
devices that support WPA, you can enter a passphrase to join the access point’s
wireless network.
•
WPA2-PSK [AES]. WPA2 is even more secure, but some older computers do not
support this standard. When using wireless computers or devices that support WPA2,
you can enter the passphrase to join the access point’s wireless network.
•
WPA-PSK [TKIP] + WPA2-PASK [AES]. When using wireless computers or devices
that support either WPA or WPA2, you can enter the passphrase to join the access
point’s wireless network.
4. Click Apply so that your changes take effect.
Powerline Utility
25
3.
Troubleshooting
Basic Functioning
After you plug in the Powerline adapter, the following sequence of events should occur:
1. The Power LED lights up.
2. After approximately 10 seconds, verify that:
a. The Power LED is solid green.
b. The Powerline LED is lit.
c. The Ethernet LED lights or blinks.
Troubleshooting Tips
The Reset and Security buttons are located on the side panel of the Access Point.
•
Pressing the Reset button longer than 2 seconds does not reset the device.
•
Pressing the Security button longer than 2 seconds does not activate security.
LEDs
The LEDs indicate activity, and can be used for troubleshooting.
LEDs Are Off When the Adapter Is Plugged In
•
First check to make sure that the electrical outlet has power.
•
If power is supplied and the LEDs stay off, someone might have used the Powerline
Utility to turn off the LEDs. Use the Powerline Utility to see if that is the case. If so, then
use the Powerline Utility to turn them back on.
Power LED
•
Off. Make sure that power is supplied to the electrical outlet, and that the Powerline
devices are not plugged into an extension cord, power strip, or surge protector.
28
Powerline 500 WiFi Access Point (XWN5001)
•
Amber. Power saving mode occurs when the Ethernet LED is off. This can occur when:
The Ethernet cable is unplugged.
The device connected through the Ethernet cable is turned off.
The adapter is idle for 10 minutes.
The adapter returns to normal mode within 2 seconds once the Ethernet link is up.
Powerline LED
•
•
Off. The Powerline devices cannot find each other. Make sure that the Powerline devices
are plugged into outlets with power, and that they use the same network encryption key.
Move the Powerline device to a location closer to the computer or devices.
If you have set up network security, make sure that all Powerline devices are using
the same encryption key.
If the problem occurred after you changed the network encryption key, reset each
device to its factory default settings. Then you can customize the encryption key.
Amber or red. Move the Powerline device to a closer location.
Ethernet LED Does Not Blink
There is no data traffic. Make sure that:
Your router and modem are switched on.
The adapter’s cable is securely connected to a router LAN port.
The PC connected directly to the router can access the Internet.
Press the Reset button on each Powerline device for 1 second to return the
Powerline adapter to its factory default settings.
If You Do Not See All Your Devices with the Powerline
Utility
If you click Refresh on the main screen of the Powerline Utility, and do not see all the devices
you expect, it could be that a Powerline adapter is in power saving mode or is set to use a
different encryption key.
•
Power saving mode. You might see a message at the bottom of the screen regarding
the power saving feature. If a unit goes into power saving mode, the Powerline Utility
does not find it. Keeping a connected Ethernet cable plugged into the device keeps it
active so that it does not go in to power saving mode.
•
Encryption keys are different. To fix this, you can do one of the following:
Reset your Powerline adapters to their factory settings and default encryption key.
Then set the encryption for all of your Powerline adapters.
Connect your computer to each Powerline device and set up the network encryption
key for one adapter at a time.
Troubleshooting
29
A.
Supplemental Information
This appendix provides technical specifications and safety information for the Powerline 500
WiFi Access Point (XWN5001).
This appendix includes the following sections:
•
Technical Specifications
•
Safety Information
30
Powerline 500 WiFi Access Point (XWN5001)
Technical Specifications
Feature
Specification
Data and routing protocols
IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-Tx)
AC input
100–240V~, 0.2A (Max)
Power consumption
Normal: 4W, Power saving mode: 3W
Dimensions
112 x 74 x 45 mm (4.41 x 2.91 x 1.77 in).
Weight
0.245 kg (0.54 lb)
Socket ratings
EU: 15A 250V~
NA: 14A 125V~
UK: 12A 250V~
Operating temperature
0 to 40 C
Operating humidity
10–90% maximum relative humidity, noncondensing
Storage humidity
5–95% maximum relative humidity, noncondensing
Security encryption type
128-bit AES
MAC addresses
64: number of nodes that can be added to a single network
Bandwidth
200 Mbps
Compatibility
Not HomePlug v1.0 or HomePlug v1.0 Turbo compatible
Data transfer rate
Up to 200 Mbps with real throughput greater than 80 Mbps
Frequency band:
2–30 Mbps
Modulation type:
OFDM symbol modulation
Electromagnetic emissions:
FCC Part 15 Class B; CE-EMC Class B; 3-home FCC Certificate
Safety agency approvals:
UL Listed (UL 1950) /cUL IEC950; CE LVD; TUV CB, TUV CG
Wireless
Enabled
Wireless communication
(32º to 104º F)
Wireless Network Name
(SSID)
Security
Transmission speed
Autoa
Country/Region
United States (varies by region)
Operating mode
802.11n, 802.11g, 802.11b
Data rate
Up to 300 Mbps
a. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions
and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
Supplemental Information
31
Powerline 500 WiFi Access Point (XWN5001)
Safety Information
Follow these safety guidelines to ensure your own personal safety and to help protect your
system from potential damage.
•
AC input: 100–240V~, 0.2A (Max).
•
Operating temperature: 0C~40 degrees C.
•
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications.
•
Actual data throughput will vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead,
lower actual data throughput rate.
•
Do not service any product except as explained in your system documentation.
•
Opening or removing covers that are marked with the triangular symbol with a lightning
bolt can expose you to electrical shock. Only a trained service technician should service
components inside these compartments.
•
Use the product only with approved equipment.
•
Allow the product to cool before removing covers or touching internal components.
•
To help avoid damaging your system, be sure that the voltage selection switch (if
provided) on the power supply is set to match the power available at your location:
110 volts (V), 60 hertz (Hz) in most of North and South America and some Far
Eastern countries such as South Korea and Taiwan.
100 V, 50 Hz in eastern Japan and 100 V, 60 Hz in western Japan.
230 V, 50 Hz in most of Europe, the Middle East, and the Far East.
•
The peripheral power cables are equipped with three-prong plugs to help ensure proper
grounding. Do not use adapter plugs or remove the grounding prong from a cable.
•
Observe extension cable and power strip ratings. Make sure that the total ampere rating
of all products plugged into the extension cable or power strip does not exceed 80
percent of the ampere ratings limit for the extension cable or power strip.
•
To help protect your system from sudden, transient increases and decreases in electrical
power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
•
For additional safety instructions, see Appendix B, Notification of Compliance.
Supplemental Information
32
B.
Notification of Compliance
NETGEAR Powerline Products
Safety Instructions and Precautions
WARNING!
Use the following safety guidelines to ensure your own personal
safety and to help protect your product from potential damage. To
reduce the risk of bodily injury, electrical shock, fire, and damage
to the equipment, observe the following precautions.
•
The socket-outlet shall be installed near the equipment and shall be easily accessible
•
Observe and follow service markings.
•
If any of the following conditions occur, unplug the product from the electrical outlet and
replace the part or contact your service provider/retailer:
The power cable, extension cable, or plug is damaged.
An object has fallen into the product.
The product has been exposed to water.
The product has been dropped or damaged.
The product does not operate correctly when you follow the operating instructions.
•
Keep your system away from radiators and heat sources. Also, do not block cooling
vents.
•
Do not spill food or liquids on your system components, and never operate the product in
a wet environment.
•
Do not push any objects into the openings of your system. Doing so can cause fire or
electric shock by shorting out interior components.
•
Operate the product only from the type of external power source indicated on the
electrical ratings label.
•
Also, be sure that attached devices are electrically rated to operate with the power
available in your location.
•
Use only approved power cables. If you have not been provided with a power cable for
your system or for any AC powered option intended for your system, purchase a power
cable that is approved for use in your country. The power cable must be rated for the
product and for the voltage and current marked on the product’s electrical ratings label.
33
Powerline 500 WiFi Access Point (XWN5001)
The voltage and current rating of the cable should be greater than the ratings marked on
the product.
•
To help prevent electric shock, plug the system and peripheral power cables into properly
grounded electrical outlets.
•
Do not use adapter plugs. If you must use an extension cable, use a three-wire cable with
properly grounded plugs.
•
Observe extension cable and power strip ratings. Make sure that the total ampere rating
of all products plugged into the extension cable or power strip does not exceed 80
percent of the ampere ratings limit for the extension cable or power strip.
•
To help protect your system from sudden, transient increases and decreases in electrical
power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
•
Position system cables and power cables carefully; route cables so that they cannot be
stepped on or tripped over. Be sure that nothing rests on any cables.
•
Do not modify power cables or plugs.
•
Always follow your local and national wiring rules.
Regulatory Compliance Information
FCC Statement
Federal Communication Commission Interference Statement
This equipment has been tested and complies with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used according to the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which is found by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experience radio/TV technician for help.
FCC Caution: Any changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
Notification of Compliance
34
Powerline 500 WiFi Access Point (XWN5001)
(2) This device must accept any interference received, including interference that may cause
undesired operation.
For products available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operated in conjunction with any
other antenna or transmitter.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and your body.
FCC Requirements for Operation in the United States
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Declaration Of Conformity
We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the
Powerline 500 Access Point (XWN5001) complies with Part 15 of FCC Rules. Operation is subject to the following
two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received, including interference that may cause undesired operation.
European Union
Europe – EU Declaration of Conformity
Marking with the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the
European Union (1999/5/EC).
This equipment meets the following conformance standards:
• EN300 328 (2.4Ghz), EN301 489-17, EN60950-1
For complete DoC, visit the NETGEAR EU Declarations of Conformity website at:
http://support.netgear.com/app/answers/detail/a_id/11621/
Table 1. EDOC in Languages of the European Community
Language
Statement
Cesky [Czech]
NETGEAR Inc. tímto prohlašuje, že tento Radiolan je ve shode se základními
požadavky a dalšími príslušnými ustanoveními smernice 1999/5/ES.
Dansk [Danish]
Undertegnede NETGEAR Inc. erklærer herved, at følgende udstyr Radiolan
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Notification of Compliance
35
Powerline 500 WiFi Access Point (XWN5001)
Language
Statement
Deutsch [German]
Hiermit erklärt NETGEAR Inc., dass sich das Gerät Radiolan in Übereinstimmung mit
den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen
der Richtlinie 1999/5/EG befindet.
Eesti [Estonian]
Käesolevaga kinnitab NETGEAR Inc. seadme Radiolan vastavust direktiivi 1999/5/EÜ
põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, NETGEAR Inc., declares that this Radiolan is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Español [Spanish]
Por medio de la presente NETGEAR Inc. declara que el Radiolan cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR Inc. ΔΗΛΩΝΕΙ ΟΤΙ Radiolan ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ
ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français [French]
Par la présente NETGEAR Inc. déclare que l'appareil Radiolan est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la directive
1999/5/CE.
Italiano [Italian]
Con la presente NETGEAR Inc. dichiara che questo Radiolan è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian]
Ar šo NETGEAR Inc. deklarē, ka Radiolan atbilst Direktīvas 1999/5/EK būtiskajām
prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių [Lithuanian]
Šiuo NETGEAR Inc. deklaruoja, kad šis Radiolan atitinka esminius reikalavimus ir
kitas 1999/5/EB Direktyvos nuostatas.
Nederlands [Dutch]
Hierbij verklaart NETGEAR Inc. dat het toestel Radiolan in overeenstemming is met
de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti [Maltese]
Hawnhekk, NETGEAR Inc., jiddikjara li dan Radiolan jikkonforma mal-htigijiet
essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar [Hungarian
Alulírott, NETGEAR Inc. nyilatkozom, hogy a Radiolan megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski [Polish]
Niniejszym NETGEAR Inc. oświadcza, że Radiolan jest zgodny z zasadniczymi
wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese] NETGEAR Inc. declara que este Radiolan está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko [Slovenian]
NETGEAR Inc. izjavlja, da je ta Radiolan v skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
Slovensky [Slovak]
NETGEAR Inc. týmto vyhlasuje, že Radiolan spĺňa základné požiadavky a všetky
príslušné ustanovenia Smernice 1999/5/ES.
Suomi [Finnish]
NETGEAR Inc. vakuuttaa täten että Radiolan tyyppinen laite on direktiivin 1999/5/EY
oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska [Swedish]
Härmed intygar NETGEAR Inc. att denna Radiolan står I överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
Notification of Compliance
36
Powerline 500 WiFi Access Point (XWN5001)
Language
Statement
Íslenska [Icelandic]
Hér með lýsir NETGEAR Inc. yfir því að Radiolan er í samræmi við grunnkröfur og
aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Norsk [Norwegian]
NETGEAR Inc. erklærer herved at utstyret Radiolan er i samsvar med de
grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and
EFTA countries, except in France and Italy where restrictive use applies. In Italy, the end user should apply for a
license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor
radio links and/or for supplying public access to telecommunications and/or network services.
This device may not be used to setting up outdoor radio links in France, and in some areas, the RF output power may
be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information, the end user should
contact the national spectrum authority in France.
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (TBD) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set
out in the Radio Interference Regulations of the Canadian Department of Communications.
Industry Canada
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE: Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This Class B
digital apparatus complies with Canadian ICES-003.
Caution:
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
NOTE IMPORTANTE: Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
GPL License Agreement
GPL may be included in this product; to view the GPL license agreement, go to
ftp://downloads.netgear.com/files/GPLnotice.pdf
For GNU General Public License (GPL) related information, please visit
http://kbserver.netgear.com/db_web_files/open_src.asp
Notification of Compliance
37
Index
installing the Powerline Utility 16
AC Input 31
adding devices to Powerline network 21
adding Powerline Access Point to network 9
label 7
LEDs 6
descriptions 6
troubleshooting 28
turning off and on with the Powerline Utility 19
bandwidth 31
basic functioning 28
buttons 6
mode, wireless 26
modulation type 31
compatibility 31
compliance 33
name, changing for Powerline devices 18
networks, Powerline 7
networks, wireless 10
data transfer rate 31
dimensions 31
package contents 5
Powerline devices, changing names 18
Powerline Access Point wireless network 12
Powerline networks 7, 8
Powerline networks, encryption keys 14
Powerline Utility 19
installing and launching 16
wireless setup 10
Powerline Utility main screen 17
encryption keys, setting 19
Security button 13
Ethernet port 6
features 5
frequency band 31
front panel 5
Quality of Service (QoS) 22
hardware 5
humidity, operating and storage 31
resetting to factory settings 20
icons
PowerlineUtility 16
Security 17
WPS 11
safety information 32
Security button 13
36
Powerline 500 WiFi Access Point (XWN5001)
Security icon 17
security, Powerline encryption 12
security, wireless 27
setting encryption keys 19
shortcut icon, Powerline Utility 16
side panel 5
SSID 26
technical specifications 30, 31
technical support 2
temperature 31
trademarks 2
troubleshooting 28
weight 31
wireless mode 26
wireless network name (SSID) 26
wireless networks 10, 11, 12
wireless security 27
wireless settings 24
wireless settings, advanced 26
WPS 11
37

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Keywords                        : NETGEAR XAVN2001 Powerline AV 200 Wireless-N Extender User Manual
Format                          : application/pdf
Title                           : XAVN2001 Powerline AV 200 Wireless-N Extender User Manual
Creator                         : NETGEAR, Inc.
Description                     : XAVN2001 Powerline AV 200 Wireless-N Extender
Create Date                     : 2012:07:18 12:06:05Z
Creator Tool                    : FrameMaker 9.0
Modify Date                     : 2012:07:18 16:02:22-07:00
Metadata Date                   : 2012:07:18 16:02:22-07:00
Copyright                       : ?2011
Document ID                     : uuid:8728ba5a-fa39-4591-977e-fad448a49d1e
Instance ID                     : uuid:75410fd5-cb95-41f3-9d31-1e3ba227a473
Page Mode                       : UseOutlines
Page Count                      : 38
Author                          : NETGEAR, Inc.
Subject                         : XAVN2001 Powerline AV 200 Wireless-N Extender
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PY312200195

Navigation menu