Netgear orporated 13200235 LTE Gateway User Manual 61000D UM 31Oct13 temp4Han

Netgear Incorporated LTE Gateway 61000D UM 31Oct13 temp4Han

UserMan

Download: Netgear orporated 13200235 LTE Gateway User Manual 61000D UM 31Oct13 temp4Han
Mirror Download [FCC.gov]Netgear orporated 13200235 LTE Gateway User Manual 61000D UM 31Oct13 temp4Han
Document ID2117088
Application IDLIYfBBE+e558F21PjzOIQg==
Document DescriptionUserMan
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize158.6kB (1982492 bits)
Date Submitted2013-11-12 00:00:00
Date Available2014-05-11 00:00:00
Creation Date2017-10-25 04:20:11
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-25 04:20:11
Document TitleMicrosoft Word - 61000D_UM_31Oct13_temp4Han
Document CreatorPScript5.dll Version 5.2.2
Document Author: Betsy Miller

NETGEAR® LTE Gateway LG6100D
User Guide
[UG template version 13a]
Table of Contents
Get Started.................................................................................................................................... 1
Package Contents ................................................................................................................. 1
Your Gateway ........................................................................................................................ 1
Care and Maintenance .......................................................................................................... 2
System Requirements ........................................................................................................... 2
Set Up Your Gateway ............................................................................................................ 2
Attach the Antennas ....................................................................................................... 2
Place Your Gateway ....................................................................................................... 3
Start Your Gateway for the First Time ............................................................................ 4
Connect to Your Gateway’s Network ..................................................................................... 4
Get Help................................................................................................................................. 6
Visiting the Sprint Website ............................................................................................. 6
Contacting Sprint Customer Service .............................................................................. 6
Gateway Basics ............................................................................................................................ 7
Components of Your Gateway............................................................................................... 7
3G and LTE Networks ........................................................................................................... 8
Power Button ......................................................................................................................... 8
LEDs ...................................................................................................................................... 9
Micro-SIM ............................................................................................................................ 10
Launch Your Mobile Network Connection ........................................................................... 10
Web Browser Interface ............................................................................................................... 11
Log In to Your Gateway ....................................................................................................... 11
Home Page .......................................................................................................................... 11
Alerts ............................................................................................................................ 13
Activate Your Account from the Home Page ................................................................ 14
Data Usage .................................................................................................................. 14
My Account Summary .................................................................................................. 15
Connection Details ....................................................................................................... 15
Your Network Connections ......................................................................................................... 18
Launch Your Mobile Network Connection ........................................................................... 18
TOC
Set up a Guest Wi-Fi Network ............................................................................................. 18
Turn the Guest Wi-Fi Network On ................................................................................ 18
Turn the Guest Wi-Fi Network Off ................................................................................ 19
Share Your Wi-Fi Network ................................................................................................... 19
Manually Enter the Wi-Fi Information ........................................................................... 19
Connect Through WPS ................................................................................................ 19
Devices Page....................................................................................................................... 20
Wi-Fi Connect Page............................................................................................................. 21
Wi-Fi Options Page.............................................................................................................. 23
MAC Filter .................................................................................................................... 26
Wi-Fi security ....................................................................................................................... 27
Change Wi-Fi Network Names and Passwords ........................................................... 29
Enable or Disable the Block List................................................................................... 30
Display and Block Currently Connected Devices (Block List) ...................................... 31
View and Unblock Devices (Block List) ........................................................................ 31
Allow or Deny Computers Access to the Network (MAC Filter).................................... 32
Wi-Fi Channel ...................................................................................................................... 34
Set the Maximum Number of Wi-Fi Devices ........................................................................ 35
Wireless Distribution System (WDS) ................................................................................... 35
Set Up the WDS Base Station ...................................................................................... 36
Set Up a WDS Repeater .............................................................................................. 37
GPS Page ............................................................................................................................ 38
Enable or Disable GPS ................................................................................................ 41
Set the GPS Mode ....................................................................................................... 41
Use Metric Units for GPS ............................................................................................. 42
Dynamic DNS ...................................................................................................................... 42
File Sharing for USB Drives ........................................................................................................ 44
Gateway Settings ........................................................................................................................ 47
Settings ................................................................................................................................ 47
General......................................................................................................................... 47
General > Software and Reset ..................................................................................... 48
General > System Logs ................................................................................................ 50
General > Date & Time Settings................................................................................... 51
TOC
ii
General > MAC Address Cloning ................................................................................. 53
General > Remote Management .................................................................................. 54
Network > Setup ........................................................................................................... 55
Network > Access Point Name ..................................................................................... 57
Network > SIM Security ................................................................................................ 58
Network > Status Details .............................................................................................. 59
Network > Broadband Settings (Dual WAN) ................................................................ 62
Router > Basic .............................................................................................................. 63
Router > Port Forwarding ............................................................................................. 65
Router > Port Filtering .................................................................................................. 67
Router > Address Reservation ..................................................................................... 68
_Toc370826571
Firewall Rules ...................................................................................................................... 70
Support ................................................................................................................................ 72
About ................................................................................................................................... 73
Feedback ............................................................................................................................. 75
Ethernet WAN Settings ........................................................................................................ 76
Connect the Ethernet WAN Port .................................................................................. 76
Specify WAN Settings .................................................................................................. 77
MTU Size ...................................................................................................................... 78
Change the MTU Size .................................................................................................. 80
LED Settings ........................................................................................................................ 80
Router Settings .................................................................................................................... 80
UPnP (Universal Plug and Play) .................................................................................. 81
DHCP ........................................................................................................................... 81
DNS Mode .................................................................................................................... 82
Enable Port Forwarding ................................................................................................ 83
Enable Port Forwarding for an Application ................................................................... 83
Disable Port Forwarding for an Application .................................................................. 84
DMZ – General ............................................................................................................. 84
Enable DMZ ................................................................................................................. 84
Configure DMZ ............................................................................................................. 85
Enable Port Filtering ..................................................................................................... 85
TOC
iii
Enable Port Filtering for an Application ........................................................................ 86
Disable Port Filtering for an Application ....................................................................... 86
Login Settings ...................................................................................................................... 87
Change the Gateway URL ........................................................................................... 87
Change the admin Password ....................................................................................... 87
Mobile Network Settings ............................................................................................................. 89
View Network Activation Information ................................................................................... 89
View Data Usage ................................................................................................................. 89
Network Settings.................................................................................................................. 90
Set the Roaming Mode ................................................................................................. 90
Enable or Disable the Roaming Guard Warning Message ........................................... 91
Set the Network Mode .................................................................................................. 91
Configure Access Point Names ........................................................................................... 92
Software and Reset .................................................................................................................... 93
Export and Import Settings .................................................................................................. 93
Export Settings ............................................................................................................. 93
Import Settings ............................................................................................................. 93
Update the Software and Firmware ..................................................................................... 94
Download Software Updates ........................................................................................ 94
Upgrade Firmware from a File ...................................................................................... 95
Reset Your Gateway............................................................................................................ 95
Clear Account Details Only .......................................................................................... 95
Reset Device Settings Only .......................................................................................... 96
Reset the Gateway to Factory Default Settings ........................................................... 96
Set Up a Virtual Private Network (VPN) ...................................................................................... 98
VPN Overview ..................................................................................................................... 98
Set Up a Remote Client-to-Gateway VPN ........................................................................... 98
Add VPN Users ............................................................................................................ 98
Specify the Client-to-Gateway VPN Connection ........................................................ 100
Enable the Client-to-Gateway VPN ............................................................................ 102
Configure a Windows Computer as a Remote Client ................................................. 103
Configure a Mac Computer as a Remote Client ................................................................ 105
Set Up a Site-to-Site VPN.................................................................................................. 108
TOC
iv
Specify the Site-to-Site VPN Connection ................................................................... 108
Enable the Site-to-Site VPN ....................................................................................... 109
Frequently Asked Questions ..................................................................................................... 111
How Can I Tell I’m Connected to 3G or LTE? ................................................................... 111
How Do I Connect to Wi-Fi? .............................................................................................. 111
Is Roaming on LTE Supported? ........................................................................................ 111
What Do I Do if I Forget the Main or Guest Wi-Fi Password? ........................................... 112
What Do I Do if I Forget the Administrator (admin) Password? ......................................... 112
If the Connection is “Always On,” Am I Always Being Billed?............................................ 113
Questions About GPS........................................................................................................ 113
What is GPS? ............................................................................................................. 113
Where Can I Use GPS? ............................................................................................. 113
How Do I Enable or Disable GPS? ............................................................................. 113
What are some GPS Limitations? .............................................................................. 113
How Can I Stream GPS Data to Use With a Third-party GPS Application? ............... 113
Questions About WPS ....................................................................................................... 114
What is WPS? ............................................................................................................ 114
How do I Use WPS? ................................................................................................... 114
If a Wireless Device has a WPS Button or a WPS Software Option, Must I Use it to
Connect Via Wi-Fi? .................................................................................................... 114
How Do I Access My Corporate Network Through a VPN?............................................... 114
Are Terminal Sessions Supported? ................................................................................... 115
Tips ........................................................................................................................................... 116
Gateway Location .............................................................................................................. 116
Improving Signal Strength ................................................................................................. 116
Improving 3G Network Service .......................................................................................... 117
Improving Wi-Fi Performance ............................................................................................ 117
Security Tips ...................................................................................................................... 118
Finding the MAC Address .................................................................................................. 118
Finding the IP Address ...................................................................................................... 119
Troubleshooting ........................................................................................................................ 121
General Tips ...................................................................................................................... 121
Insufficient Signal Strength ................................................................................................ 121
TOC
Cannot Connect to Wi-Fi ................................................................................................... 121
Cannot Display the Home Page ........................................................................................ 122
Cannot Connect to the Mobile Broadband Network .......................................................... 123
GPS Doesn’t Seem to Be Available................................................................................... 124
Cannot Check for Updates ................................................................................................ 124
Technical Specifications ........................................................................................................... 125
Radio Frequency and Electrical Specifications.................................................................. 125
Software Specifications ..................................................................................................... 126
Environmental Specifications............................................................................................. 127
Mechanical Specifications ................................................................................................. 127
Safety Information ..................................................................................................................... 129
Important Notice ................................................................................................................ 129
Safety and Hazards ........................................................................................................... 129
Regulatory Notices .................................................................................................................... 130
Legal ......................................................................................................................................... 132
Patents .............................................................................................................................. 132
Licenses ............................................................................................................................ 132
GNU General Public License (Version 2) ................................................................... 132
GNU General Public License (Version 3) ................................................................... 138
GNU Lesser General Public License (Version 2.1) .................................................... 150
GNU Lesser General Public License (Version 3) ....................................................... 158
License ....................................................................................................................... 161
libxml2 License ........................................................................................................... 162
locapi License ............................................................................................................. 163
pimd License .............................................................................................................. 164
shadow License.......................................................................................................... 165
ISC License ................................................................................................................ 165
OpenSSL License ...................................................................................................... 166
Original SSLeay License ............................................................................................ 167
Trademarks........................................................................................................................ 168
Copyright ........................................................................................................................... 168
Limitation of Liability .......................................................................................................... 169
Additional Information and Updates................................................................................... 169
TOC
vi
Index ......................................................................................................................................... 170
TOC
vii
Get Started
The following topics give you all the information you need to set up your gateway and Sprint
service the first time.
Package Contents
Your package includes several items.
●
NETGEAR 4G LTE Gateway 6100D
●
Power adapter
●
Micro-SIM (pre-installed)
●
Ethernet cable
●
Get Started poster
Your Gateway
The following illustrations show your gateway’s LEDs, buttons, and connectors.
Front View
Get Started
Back View
Care and Maintenance
As with any electronic device, you should handle the gateway with care to ensure reliable
operation. Follow these guidelines in using and storing your device.
●
Protect your device from liquids, dust, and excessive heat.
●
Do not apply adhesive labels to your device. They may cause your device to overheat
and may alter the antenna’s performance.
System Requirements
The following items are required to use your NETGEAR 4G LTE Gateway 6100D.
●
One or more computers that support Wi-Fi (802.11b/g/n or 11ac)
●
Web browser (required if you’ll be using the browser interface to view status and to
configure settings). The following browsers are supported:

Internet Explorer (version 8 and above)

Firefox (version 3.6.24 and above)

Chrome (version 30 and above)
If you’ll be connecting to your gateway through Ethernet:

Computer with an available Ethernet port
Set Up Your Gateway
The following topics describe how to set up and start using your gateway.
Attach the Antennas
The gateway comes with two external antennas that are interchangeable.
1. Attach the antennas to the gateway.
Get Started
2. Adjust the antennas so that they are vertical.
Place Your Gateway
Place your gateway in a location with a good 3G or LTE signal.
1. Place your gateway in a location with good 3G or 4G coverage, such as near a window.
Note: When the gateway is powered on, you can use the Signal Quality LED
position the gateway in the location with the best signal strength.
to
2. Also, for best results, place your gateway:

Near the center of the area where your computers and other devices operate, and
preferably within line of sight to your Wi-Fi devices.
Get Started

So it is accessible to an AC power outlet and near Ethernet cables for wired
computers.

In an elevated location such as a high shelf, keeping the number of walls and
ceilings between the gateway and your other devices to a minimum.

Away from electrical devices that are potential sources of interference. Equipment
that might cause interference includes ceiling fans, home security systems,
microwaves, computers, the base of a cordless phone, or a 2.4 GHz cordless phone.

Away from any large metal surfaces, such as a solid metal door or aluminum studs.
Large expanses of other materials such as glass, insulated walls, fish tanks, mirrors,
brick, and concrete can also affect your wireless signal.
Start Your Gateway for the First Time
Learn how to start your gateway for the first time.
The gateway is designed to activate automatically the first time that it is turned on using ‘handsfree activation’. Typically, the activation process will be seamless, not requiring any action on
your part.
To start your gateway:
1. Connect the power adapter to the gateway and plug the power adapter into an electrical
outlet.
2. Make sure that the Power On/Off button on the rear panel of the gateway is pressed in.

The Power

The gateway automatically connects to a 3G or LTE network, and the 3G LED or the
LTE LED lights.

The Internet
and Wi-Fi LEDs light.
LED lights to show that you have Internet access.
If your account did not activate for some reason, connect to the gateway network and use a
Web browser to log in to the gateway. Alerts on the home page allow you to try the activation
again. You must activate your account before you can use Sprint data services.
Connect to Your Gateway’s Network
You can connect with Wi-Fi or you can use an Ethernet cable for a wired connection to an
Ethernet LAN port.
Tip: The Wi-Fi network name and password are on the label of the gateway.
Tip: Alternatively, you can use WPS to connect your computer or device to the gateway, if your
computer or device supports WPS. (See Connecting Through WPS.)
Get Started
To find and select a Wi-Fi network, then connect with Wi-Fi:
1. Do one of the following, depending on your operating system.

Windows 7: Right-click the Wi-Fi icon

Windows Vista: Click Control Panel > Network and Internet > Network and
Sharing Center > Connect to a network.

Windows XP: Click Control Panel > Network Connections > Wireless Network
Connections > View available wireless networks.

Mac: Click the AirPort icon

Linux: Please see the user documentation of the Linux distribution.

Other operating systems: Please see the user documentation for your operating
system or computer.
in the system tray.
(in the upper right corner of your screen).
2. Select the Wi-Fi network for the gateway and connect to it. (If prompted for a network
key/security key/password, enter the Wi-Fi password on the gateway label.)
To use WPS to connect with Wi-Fi:
3. Check the WPS instructions that came with your computer or wireless device.
4. Press the WPS button
■
on the gateway.
For 2 minutes, the gateway tries to detect a computer or wireless device that is using
WPS to connect to its Wi-Fi network.
5. On your computer or wireless device, press its WPS button or follow its WPS
instructions.
■
Your computer or wireless device connects to the Wi-Fi network.
To connect with Ethernet:
A yellow Ethernet cable comes in the package with your gateway.
1. Connect an Ethernet cable (included in the package) to one of the yellow Ethernet LAN
ports on the rear panel of the gateway.
3. Connect the other end of the Ethernet cable to an Ethernet port on your computer.
Get Started
The Ethernet LAN
LED on the gateway lights.
Your computer connects to the gateway’s local area network (LAN). A message might display
on your computer screen to notify you that an Ethernet cable is connected.
Get Help
Learn where you can get more information or assistance.
Visiting the Sprint Website
Sign on to sprint.com to get up-to-date information on Sprint services and options.
●
Review coverage maps.
●
Access your account information.
●
Add additional options to your service plan.
●
Purchase accessories.
●
Check out frequently asked questions.
●
And more.
Contacting Sprint Customer Service
You can reach Sprint Customer Service online or by calling toll-free.
●
Log in to your account at sprint.com.
●
Call us toll-free at 1-888-788-4727 (business use) or 1-888-211-4727 (personal use).
Get Started
Gateway Basics
Learn about the buttons, connectors, and other components of your gateway.
Your gateway provides a simple way to use your Internet connection (3G or LTE) with any
Wi-Fi-enabled device, and to share your Internet connection with friends and family.
Components of Your Gateway
Your gateway consists of several main components.
●
Main and Guest Wi-Fi networks: The Wi-Fi networks (access points) connect your
computers and other Wi-Fi-enabled devices to the gateway.
●
Main Wi-Fi dual-band: The gateway has two Main Wi-Fi networks, so you can connect
with 2.4 GHz or 5 GHz Wi-Fi. To connect with 5 GHz, your computer or Wi-Fi-enabled
device must support 5 GHz.
●
Modem: The modem connects your gateway to the Internet via the best available
network (customizable):

LTE – Newer technology, faster speeds compared with 3G

3G – CDMA technology, more widely available compared with LTE
●
Routing hardware: The routing hardware handles traffic between the modem, the Wi-Fi
access point, and the Wi-Fi network.
●
USB port: You can connect a USB drive and share it.
3G and LTE Networks
These wireless networks connect you to the Internet.
Depending on your coverage area, you may have:
●
Only LTE coverage
●
Only 3G coverage
●
A combination of these networks
The gateway automatically connects to the fastest network that is available to you. If you have
both 3G and LTE coverage and your connection happens to get disrupted, your gateway can
automatically switch to the other network. (For more information, see Mobile Broadband
Information and Settings.)
Your gateway is designed to always connect to an available network if possible. If your gateway
is not connected (dropped signal, roaming not supported, etc.) the
Signal Strength
LED is off. The connection status can also be seen on your gateway’s Network > Status Details
Page.
Your gateway can be set to connect automatically to the best available network, or to connect to
LTE or 3G networks only. See Setting the Allowed Network Mode.
Your gateway can also be set to allow roaming on Sprint networks, domestically, and
internationally. See Setting the Roaming Mode.
Power Button
Use the Power button to turn your gateway on and off.
To turn your gateway on:
1. Make sure that power adapter for your gateway is plugged in to an electrical outlet.
2. Press the Power On/Off button so that it is in the on position.
Note: The LEDs on the gateway light unless you logged in to the gateway and turned off the
LEDs from the Device page.
To turn your gateway off:
■
Press the Power On/Off button so that it is in the off position.
Note: The LEDs on the gateway turn off.
LEDs
The LED status indicators show the gateway’s Internet and network connections.
LED
Description
Signal
Quality
5 bars: Excellent coverage.
4 bars: Strong coverage.
3 bars: Moderate coverage.
1 bar: Poor coverage.
Off: No coverage.
3G
Connection
Solid blue: The gateway has a connection with the 3G network.
Off: The gateway does not have a 3G connection.
LTE
Connection
Solid blue: The gateway has a connection with the 4G LTE network.
Off: The gateway does not have a 4G connection.
Wi-Fi
Solid green: The 2.4 GHz wireless radio is on.
Solid purple: The 5 GHz wireless radio is on.
Solid blue: Both the 2.5 GHz and the 5 GHz wireless radios are on.
Off: The wireless radios are off.
Ethernet
WAN
Solid blue: The Ethernet WAN port is connected to a device and is ready.
Off: The gateway does not detect a link on this port.
Ethernet LAN
Solid blue: One or more local Ethernet ports 1-4 have detected wired links.
Off: The gateway does not detect links on these ports.
USB
Solid blue: The gateway has accepted the USB device and the USB device
is ready.
Off: No USB device is connected.
Internet
Solid blue: The Internet connection is ready.
Solid amber: Network error.
Slow blinking amber: The gateway failed to cut over from an Internet WAN
connection to a mobile broadband connection.
Off: No Internet connection.
Power
Solid green: The gateway is ready.
Slow blinking green: The gateway is powering up.
Solid red: System failure.
Slow blinking red: Thermal cut off alarm.
Off: No power is supplied to the gateway.
Wi-Fi On/Off
Solid blue: The wireless radios are on.
Off: The wireless radios are off.
WPS
Solid blue: WPS security is enabled.
Blinking blue: Someone is using WPS to join the gateway’s Wi-Fi network.
Off: WPS is not in use.
Micro-SIM
Your gateway comes with a pre-installed micro-SIM that gives you access to the Sprint network.
Launch Your Mobile Network Connection
After your gateway powers on and boots up, a connection to the best available network (3G,
4G, or LTE) is launched automatically.
Your gateway remains connected at all times, unless:
●
You are out of signal range or the signal is blocked.
●
You are in a roaming area and you have chosen not to allow roaming.
Note: Even though your gateway is connected, you are only billed when data is sent or
received. See If the Connection is “Always On,” Am I Always Being Billed?
10
Web Browser Interface
When you connect to the gateway network (either with Wi-Fi or with an Ethernet cable), you can
use a Web browser to log in to your gateway to view or change its settings.
Log In to Your Gateway
Tip: If you want to change your gateway’s Wi-Fi settings, use a wired Ethernet connection to
avoid being disconnected when the new Wi-Fi settings take effect.
To log in to your gateway:
1. On a computer or wireless device that is connected to your gateway’s network, launch a
Web browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Note: If you’re using the Google Chrome Web browser, after typing in the address bar,
press the Down Arrow key and then press the Enter key. (If you don’t press the Down
Arrow first, a Google search starts and you are not prompted to log in to your gateway.)
4. If your Web browser displays an error message, see Cannot Display the Home Page.
Home Page
The home page is the entry page when you log in to the gateway.
You can:
●
Activate your account if it did not automatically activate.
●
View your data usage and status information for your data connection.
●
Manage your mobile broadband network connection and Wi-Fi connections.
●
View alert messages.
Web Browser Interface
11
Item
Description
Home
Click to view the Home Page.
Devices
Click to view the Devices Page.
Wi-Fi
Click to view the Wi-Fi Page.
GPS
Click to view the GPS Page.
Settings
Click to view the Settings Page.
Connection
Details
Mobile broadband connection information – See Mobile Broadband
Information and Settings.
Devices
Connected
List of devices connected to the gateway’s Main or Guest Wi-Fi networks.
My Account
Summary
Basic information about your Sprint data plan. For more details, click My
Sprint to connect to your account at mysprint.sprint.com/mysprint.
Twitter®
Click to view the AirCard Twitter feed in a new browser window or tab. (Your
Web Browser Interface
12
device must be connected to the network for this option to work.)
Facebook
®
Click to view the AirCard Facebook page in a new browser window or tab.
(Your device must be connected to the network for this option to work.)
Feedback
Click to send NETGEAR your comments on your gateway. See Feedback
Page. (Your device must be connected to the network for this option to work.)
International
Information
Click to view Sprint’s International Coverage Areas search feature in a new
browser window or tab. (Your device must be connected to the network for
this option to work.)
Important
Information
Click to read important safety information about the gateway.
Alerts
Alerts remain until issue is resolved.
Data Usage
Session
Estimated data usage for current session.
Data Usage
of This Month
Estimated data usage for current billing period.
Alerts
Alerts notify you about situations that require your attention and suggest the actions you need to
take to resolve them.
The following information is displayed for each alert.
Item
Description
Alert title
A short description of the issue to be addressed.
Description
The alert message and, if appropriate, links or buttons to take action on the
alert. (For example, the “Update now” link in the second alert shown above
would take you to the Software Update screen.)
The alerts disappear only when the issues they describe are resolved. See Alerts for a list of
alerts you may encounter and the corrective actions required.
Some of the alerts you may encounter include:
●
Software Update Available
●
Max Wi-Fi devices reached
Web Browser Interface
13
●
Mobile Broadband disconnected
●
Wi-Fi is off
●
Gateway is not activated
●
SIM errors
●
Roam Guard
Activate Your Account from the Home Page
Until your account is activated, you cannot use Sprint data services.
To activate your account:
1. On the home screen, go through the alerts until you see the Hotspot not activated
alert.
2. Click Retry Activation.
3. Follow any instructions that may appear.
Data Usage
Data usage estimates are shown in the Data Usage section of the home page.
Note: Data usage amounts are approximate and should not be used for billing purposes. For
accurate data usage amounts, check with Sprint or click the My Sprint link in the My Account
Summary section to view your account details.
Web Browser Interface
14
The Data Usage section displays monthly billing period statistics and current session statistics.
Item
Description
Current billing cycle
Usage of This
Month
The amount of data sent and received during the billing period for each
network type.
Reset button
Click to set the displayed monthly usage values to 0MB.
Important:
This does not reset the actual data usage for the billing cycle.
Session
Used
Data amount used since your device connected to the network
Elapsed time
Length of time that your device has been connected to the network
My Account Summary
The My Account Summary section shows basic information about your plan, and includes a link
to see more detailed information.
The following information is displayed.
Item
Description
My Data Plan
The type of Sprint data plan used on your gateway.
My Number
The telephone number linked to your data plan.
My Sprint
Click to connect to your account at mysprint.sprint.com/mysprint.
Connection Details
The Connection Details section shows details about your mobile broadband service and
connection state, and lists the devices that are connected to the Main and Guest Wi-Fi
networks.
Gateway Basics
15
The following information is displayed.
Item
Description
Signal
strength and
roaming
status
The more bars, the stronger the signal. A triangle in the icon means your
device is roaming. See Signal Information for details.
Network
carrier name
Name of the available network. For example, “Sprint”.
Network type
LTE or 3G
Send /
Receive
indicators
Up (sending data) / Down (receiving data)
This icon appears when you are connected to the mobile network.
Roaming
message
Indicates whether your device is roaming on a Sprint network, domestically,
or internationally.
Connect /
Disconnect
button
Click this button to connect or disconnect your device from the mobile
network.
Devices
Wi-Fi 2.4 GHz: A list of devices currently connected to the Main Wi-Fi 2.4
Gateway Basics
16
Connected
GHz network.
Wi-Fi 5 GHz: A list of devices currently connected to the Main Wi-Fi 5 GHz
network
Guest Wi-Fi: A list of devices currently connected to the Guest Wi-Fi
network.
You can click any of the device names to view their details, or to block them
from using your network. See Displaying and Blocking Currently Connected
Devices (Block List).
Gateway Basics
17
Your Network Connections
Find out how to launch, share, and end your Internet network connection.
Launch Your Mobile Network Connection
After your gateway powers on and boots up, a connection to the best available network is
launched automatically.
Your gateway remains connected at all times, unless:
●
You are out of signal range or the signal is blocked.
●
You are in a roaming area and you have chosen not to allow roaming.
Note: Even though your gateway is connected, you are only billed when data is sent or
received. See If the Connection is “Always On,” Am I Always Being Billed?
Set up a Guest Wi-Fi Network
You can create a separate Guest Wi-Fi network that you can share with temporary users.
Computers and wireless devices on the Guest Wi-Fi network:
●
Cannot access devices that are on the Main Wi-Fi network (such as printers or other
computers)
●
Cannot log in to the gateway to change its settings
Turn the Guest Wi-Fi Network On
You can turn on the Guest Wi-Fi network on the gateway’s Wi-Fi page.
To turn the guest Wi-Fi network on:
4. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
5. In the address or URL field of your browser, type http://myrouter.
6. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
7. Click Wi-Fi.
8. In the Guest Wi-Fi area, click Turn On.
Your Network Connections
18
Turn the Guest Wi-Fi Network Off
You can turn off the Guest Wi-Fi network on the gateway’s Wi-Fi page.
To turn the guest Wi-Fi network off:
9. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
10. In the address or URL field of your browser, type http://myrouter.
11. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
12. Click Wi-Fi.
13. In the Guest Wi-Fi area, click Turn Off.
Share Your Wi-Fi Network
Your gateway provides two ways of sharing your network connection with other users.
●
Users find and select the Main or Guest Wi-Fi network information.
●
User connects to the Main or Guest Wi-Fi network using WPS.
Manually Enter the Wi-Fi Information
Users can connect to the network by manually entering the Wi-Fi information.
Share your network connection with others:
1. Provide the Main or Guest Wi-Fi network name and password to them.
2. Users must open their device’s Wi-Fi network manager and connect to the Main or
Guest Wi-Fi network using the password you provided. (See How Do I Connect to
Wi-Fi?)
Connect Through WPS
Wi-Fi Protected Setup (WPS) provides a fast, simple, and secure way to connect WPS-enabled
devices to your Wi-Fi network.
With WPS, you don’t have to give the name (SSID) and Wi-Fi password of your Main or Guest
network to other users. The WPS feature is available on certain cameras, printers,
smartphones, and laptops. These devices have either a hardware button or a WPS-related
option in the software. Please consult the user documentation of your device.
WPS is always available for the Main and Guest Wi-Fi networks as long as the Wi-Fi radio is on.
WPS is not available in the following situations:
Your Network Connections
19
●
The Wi-Fi radio is off because someone pressed the Wi-Fi On/Off button on the
gateway.
●
The Wi-Fi security option is WPA Personal, WEP, or WEP-related (for example, “WEP
64 Bit Open”). (WPS is available if the Wi-Fi security option is WPA/WPA2 Personal.)
(See Wi-Fi Security.)
●
Broadcast network name is not enabled. (See Options Tab.)
●
MAC Filter Mode is “White list (Allow only those in list)”, but no computers have been
added to the list. (See “Specifying Computers That Can Access the Network” in Allowing
or Denying Computers Access to the Network (MAC Filter).)
If the maximum number of connected devices on the chosen network (Main or Guest) has
already been met, an error message indicating that the maximum number of devices has been
reached is displayed when you attempt WPS. Disconnect one of the connected devices and
then retry.
You can use the WPS button on the gateway or you can log in to the gateway and use the
Wi-Fi > Connect page.
Devices Page
The Devices page lets you see lists of devices that are connected to your Main and Guest Wi-Fi
networks.
Note: These lists are also shown in the Devices Connected section on the left side of the
page.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Your Network Connections
20
4. Click Devices.
The following information is displayed.
Item
Description
Main Wi-Fi
(2.4 GHz)
A list of devices currently connected to the Main Wi-Fi network in the 2.4 GHz
band.
Main Wi-Fi
(5 GHz)
A list of devices currently connected to the Main Wi-Fi network in the 5 GHz
band.
Guest Wi-Fi
A list of devices currently connected to the Guest Wi-Fi network.
Ethernet
A list of devices currently connected to the device through an Ethernet
connection to an Ethernet LAN port.
You can click any of the device names to view detailed information, and to block them from
using your network. See Displaying and Blocking Currently Connected Devices (Block List).
Wi-Fi Connect Page
From the Wi-Fi page, you can configure the Wi-Fi network, including Wi-Fi security.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Your Network Connections
21
4. Click Wi-Fi.
You can configure access to your Main and Guest Wi-Fi networks.
You can:
●
Edit the Main or Guest Wi-Fi names and passwords. See Change Wi-Fi Network Names
and Passwords.
●
Turn the Guest Wi-Fi network on or off. See Setting up a Guest Wi-Fi Network.
●
Connect devices using WPS. See Connecting Through WPS.
The following information is displayed.
Item
Description
Main Wi-Fi (2.4 GHz)
Name
This is the name that identifies your Main Wi-Fi network and is visible to other
Wi-Fi-enabled devices. See Change Wi-Fi Network Names and Passwords.
WPS
Connect a device to the Main Wi-Fi network using WPS. See Connecting
Through WPS.
Main Wi-Fi (5 GHz)
Name
This is the name that identifies your Main Wi-Fi network and is visible to other
Wi-Fi-enabled devices. See Change Wi-Fi Network Names and Passwords.
WPS
Connect a device to the Main Wi-Fi network using WPS. See Connecting
Through WPS.
Your Network Connections
22
Guest Wi-Fi
Turn Off /
Turn On
Click this button to turn the Guest Wi-Fi network on or off.
Note: The rest of the Guest Wi-Fi fields / buttons appear only when the
Guest Wi-Fi network is on.
Name
This is the name that identifies your Guest Wi-Fi network and is visible to
other Wi-Fi-enabled devices. See Change Wi-Fi Network Names and
Passwords.
Wi-Fi Options Page
From the Wi-Fi Options page, you can configure your Wi-Fi network’s connection settings and
security, and additional Wi-Fi options.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Your Network Connections
23
4. Click Wi-Fi > Options.
You can:
●
Edit the Main or Guest Wi-Fi names and passwords. See Change Wi-Fi Network Names
and Passwords.
Your Network Connections
24
●
Configure your Wi-Fi network’s connection parameters and security, and additional Wi-Fi
options.
●
Specify the maximum number of devices that can connect to the WiFi network.
Note: For some of these Wi-Fi settings, if you change them, all connected devices will be
disconnected and have to reconnect after the settings are saved.
The following information is displayed.
Item
Description
Main Wi-Fi
Network Name
This is the name that identifies your Main Wi-Fi network and is visible to
other Wi-Fi-enabled devices. (See Change Wi-Fi Network Names and
Passwords.)
Guest Wi-Fi
Network name
This is the name that identifies your Guest Wi-Fi network and is visible to
other Wi-Fi-enabled devices. (See Change Wi-Fi Network Names and
Passwords.)
Wi-Fi Options
Wi-Fi Range
Short
Medium
Long
Connection
Connection
Rate
This setting determines the type of Wi-Fi devices that can connect to your
network.
For the Main and Guest 2.4 GHz networks, the default connection is Up to
300 Mbps. The other choices are Up to 130 Mbps and Up to 54 Mbps.
For the 5 GHz network, the default connection rate is Up to 300 Mbps. The
other choices are Up to 400 Mbps and Up to 800 Mbps.
Wi-Fi Channel
This is the active channel of the Wi-Fi access point. If your network is
having performance issues (possibly caused by other Wi-Fi networks in the
vicinity using the same channel), try a different Wi-Fi channel. See Wi-Fi
Channel.
RTS Threshold
This setting specifies the smallest packet size, in bytes, for which RTS/CTS
(Request to Send/Clear to Send) handshaking is used. The recommended
value is 2347. Change this value only if you’re experiencing inconsistent
data flow. Make only minor changes to this value.
Your Network Connections
25
Fragmentation
Threshold
This setting specifies the largest allowable size, in bytes, for a packet. If the
packet is larger than this, it is fragmented into multiple packet before it is
transmitted. To prevent poor network performance, it’s recommended to
keep this value as large as possible (up to 2346).
Security
Broadcast
Network Name
If broadcast is enabled (Yes), the wireless network is displayed in the list of
Wi-Fi networks available in the local area. For increased security, set this
field to No. You will need to give the Wi-Fi network name (Main or Guest) to
the people who will be accessing your network, and WPS will not be
available.
Encryption
The type of security used by the Main Wi-Fi network. See Wi-Fi Security.
Guest
Encryption
The type of security used by the Guest Wi-Fi network. See Wi-Fi Security.
MAC Filter
MAC (Media Access Control) filtering can prevent unauthorized wireless devices from
connecting to your network.
The MAC filter is used to grant (“white list”) or block (“black list”) wireless devices access to the
Wi-Fi and mobile broadband (3G or LTE) networks. Access is based on the MAC address of
each wireless device.
MAC filtering increases security of your network. You can give access to your network, based
on the MAC address of the wireless devices. This makes it harder for a hacker to use a MAC
address to access your network.
To set up MAC filtering or turn it off:
5. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
6. In the address or URL field of your browser, type http://myrouter.
7. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Your Network Connections
26
8. Click Wi-Fi > MAC Filter.
You can:
●
Turn MAC filtering off (“None”) or on (“Block List” or “White List”).
●
Add or remove a device from the list. (See “Specifying Computers That Can Access the
Network” and “Specifying Computers That Are Not Allowed to Access the Network” in
Allowing or Denying Computers Access to the Network (MAC Filter)).
The following information is displayed.
Item
MAC Filter
Mode
Description
●
None – Any device can connect to the Wi-Fi networks.
●
Black List – The listed devices will not be able to connect to the
Wi-Fi networks.
●
White List – Only the listed devices will be allowed to connect to the
Wi-Fi networks.
Black List or White List
Name
A description of the device (the owner’s name, the device’s purpose, etc.)
MAC Address
The device’s MAC address.
Wi-Fi security
Learn about the Wi-Fi security options available to you.
By default Wi-Fi security is enabled for your device and its Wi-Fi networks.
Your Network Connections
27
Note: All devices used with the gateway must support the selected security type.
Note: WPS is available only if you select either a WPA2 Personal option (including WPA/WPA2
Personal) or no security (not recommended). (See Connecting Through WPS.)
Note: WEP is available only for the guest network.
You can change the security used for Wi-Fi:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi > Options.
5. In the list beside Encryption (for Main Wi-Fi) or Guest Encryption (for Guest Wi-Fi)
select one of the following options. Note that not all options may be available, depending
on the Connection Rate.

None: No security is used (no password is required to access the Wi-Fi network);
this setting is not recommended. Anyone may access your device and use your
Internet connection. (You are responsible for payment for data usage fees.)

WEP 64 Bit – Open: This option provides security, but it’s relatively weak. This
option works with older and newer Wi-Fi devices, and is recommended only if any of
your devices don’t support WPA or WPA2.
Open WEP uses the key for encryption, but not for authentication.

WEP 64 Bit – Shared: This option provides security, but it’s relatively weak. This
option works with older and newer Wi-Fi devices, and is recommended only if any of
your devices don’t support WPA or WPA2.
Shared WEP uses the same key for encryption and authentication; some consider
shared WEP to be less secure than open WEP.

WEP 128 Bit – Open: This option provides security, but it’s relatively weak (but
stronger than WEP 64 Bit – Open). This option works with older and newer Wi-Fi
devices, and is recommended only if any of your devices don’t support WPA or
WPA2.
Open WEP uses the key for encryption, but not for authentication.
Your Network Connections
28

WEP 128 Bit – Shared: This option provides security, but it’s relatively weak (but
stronger than WEP 64 Bit – Shared). This option works with older and newer Wi-Fi
devices, and is recommended only if any of your devices don’t support WPA or
WPA2.
Shared WEP uses the same key for encryption and authentication; some consider
shared WEP to be less secure than open WEP.

WPA PSK TKIP: This is a strong security standard that is supported by most Wi-Fi
devices.

WPA2 PSK AES: This is a stronger, newer security standard that is limited to newer
Wi-Fi devices.

WPA2 PSK TKIP: This is a stronger, newer security standard that is limited to newer
Wi-Fi devices.

WPA/WPA2 Enterprise (recommended setting if any of your devices are more than
two years old): Wi-Fi devices that use either WPA or WPA2 can connect to the
NETGEAR 6100D. Supported by most Wi-Fi devices.
6. Click Submit.
The option you select determines the Wi-Fi security used and also the maximum length of the
Wi-Fi password.
Change Wi-Fi Network Names and Passwords
The Main and Guest Wi-Fi network names identify your Wi-Fi networks and are visible to other
Wi-Fi-enabled devices.
You can change the names and passwords for your Main and Guest Wi-Fi networks on the
gateway’s Wi-Fi > Options page.
For optimal security, you should make your Wi-Fi network names and passwords unique, and
change them on a regular basis.
Note: If you change either of the Wi-Fi network names or passwords, all connected devices will
be disconnected and will have to reconnect using the new values.
Note: For security reasons, it’s recommended you disable SSID Broadcast. (See Options
Section.)
To make your Wi-Fi passwords more secure:
●
Use numbers and both uppercase and lowercase letters.
●
Use special characters (for example, ‘@’, ‘#’, etc.).
Your Network Connections
29
Also, the password length depends on the Wi-Fi encryption type that you’ve selected. (See
Wi-Fi Security.)
●
None – No password is required.
●
WEP 64 bit – Open: The password must be 5 ASCII characters.
●
WEP 64 bit – Shared: The password must be 5 ASCII characters.
●
WEP 128 bit – Open: The password must be 13 ASCII characters.
●
WEP 128 bit – Shared: The password must be 13 ASCII characters.
●
WPA-Personal TKIP: The password must be 8 to 63 ASCII characters.
●
WPA-Personal TKIP/AES: The password must be 8 to 63 ASCII characters.
●
WPA2-Personal TKIP/AES: The password must be 8 to 63 ASCII characters.
●
WPA/WPA2 Personal: The password must be 8 to 63 ASCII characters.
To change the Wi-Fi network name and password:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi > Options
5. In the Main Wi-Fi and Guest Wi-Fi sections, change the Network Name and Password
fields as desired. (The required lengths appear beneath the fields.)
6. Click Submit.
7. When prompted, click Submit again. (All devices that were connected will have to
reconnect with the new settings.)
Enable or Disable the Block List
You can enable your gateway’s block list on the gateway’s Wi-Fi MAC Filter page. This lets you
identify devices that should not be allowed to access your Wi-Fi networks.
To enable or disable the Wi-Fi block list (MAC filtering):
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
Your Network Connections
30
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi > MAC Filter.
5. Beside MAC Filter Mode, select Black List to block devices, or select White List to
prevent devices from being blocked.
6. Click Submit.
Display and Block Currently Connected Devices (Block List)
To detect a potential intruder, you may want to display a list of the Wi-Fi-enabled devices that
are currently connected to your gateway. You can view this list the gateway’s home page.
To stop a device from connecting to your network, you can add it to your gateway’s block list.
The blocked device will not be able to connect again until you choose to unblock it. (See View
and Unblock Devices (Block List).)
Note: You have to enable the block list before you can block devices from using your Wi-Fi
networks. (See Enable / Disable the Block List.)
To manage the block list:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
The Devices Connected section of the home page shows a list of the devices
connected to your Main and Guest Wi-Fi networks.
4. To block a listed device, click its device name. The device’s IP address and MAC
address display.
5. Click Block Device.
6. Click Block Device again.
View and Unblock Devices (Block List)
You can view a list of devices that you have blocked (see Displaying and Blocking Currently
Connected Devices (Block List)) from connecting to your gateway on your gateway’s Wi-Fi
MAC Filter page.
Your Network Connections
31
To allow any of these devices to connect to the network again, you can remove them from your
device’s block list.
To view and unblock devices on the block list:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi > MAC Filter. A list of the devices blocked from using your Wi-Fi networks
appears.
5. Click the
beside the device you want to unblock. The device is removed from the list
immediately.
Allow or Deny Computers Access to the Network (MAC Filter)
MAC (Media Access Control) filtering can prevent unauthorized wireless devices from
connecting to your network.
The MAC filter is used to grant (“white list”) or block (“black list”) wireless devices access to the
Main and Guest Wi-Fi networks. Access is based on the MAC address of each wireless device.
In the MAC Filter page (Wi-Fi > Mac Filter), you can choose one of three modes:
●
None – All computers are allowed to access the network.
●
Black list – All computers are allowed to access the network, unless they’re in this list.
●
White list – Only computers that are in this list are allowed to access the network.
Regardless of the mode, a user must provide the correct Wi-Fi password to access the network.
To specify computers that can access the network:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi > MAC Filter.
5. Beside MAC Filter Mode, select White list.
Your Network Connections
32
4. In the empty Name field, enter a name for the device. For example, “Amy’s PC”.
5. In the empty MAC Address field, enter the MAC address of the device you’re adding to
the list. (If you don’t know this address, see Finding the MAC Address.)
Click the
beside the row.
6. Repeat steps 4 and 5 for each computer for which you want to allow access.
IMPORTANT: Make sure you add the computer you are using, or else you will not be able to
access the network after your device resets.
7. Click Submit.
To specify computers that are not allowed to access the network:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi > MAC Filter.
5. Beside MAC Filter Mode, select Black list.
6. Determine and block an undesired user of your network:
●
In the Devices Connected section, if you see a device you don’t recognize, you can click
its name and compare its MAC address to the MAC address of each of the devices on
your network.
To determine the MAC address of each device you have, see Finding the MAC Address.
If none of your devices have this MAC address, that device might be an intruder.
●
In the empty Name field, enter a name for the device. For example, “Amy’s PC”.
●
In the empty MAC Address field, enter the MAC address of the device you’re adding to
the list.
●
Click the
beside the row.
7. For each device you want to block, repeat step 4.
Tip: You can also block the device from the device list. See Displaying and Blocking Currently
Connected Devices (Block List).
Your Network Connections
33
Removing a Device From the Allowed or Disallowed Lists
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi > MAC Filter.
5. In the list of allowed/disallowed devices, click the
beside the row.
6. Click Submit.
Wi-Fi Channel
The Wi-Fi channel is the active channel of the Wi-Fi access point. If your network is having
performance issues (possibly caused by other Wi-Fi networks in the vicinity using the same
channel), try a different Wi-Fi channel.
You can change the channel from your gateway’s Wi-Fi Options page.
Note: All connected devices will be disconnected and have to reconnect if the channel is
changed.
To change the Wi-Fi channel:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi > Options.
5. Select a different channel number in the Wi-Fi Channel list, or, to have your device
automatically determine the channel to use, select Auto.
Note: If you choose Auto, your device could reselect the same channel. If this happens,
try again.
6. Click Submit.
Your Network Connections
34
Set the Maximum Number of Wi-Fi Devices
You can enter the maximum number of Wi-Fi devices that are allowed to connect to the
gateway at the same time.
If your network is having performance issues, you might want to allow fewer Wi-Fi devices to
connect to your gateway at the same time, or change the maximum number of devices that can
connect to either the Main Wi-Fi or Guest Wi-Fi networks at the same time. (When Guest Wi-Fi
is turned on, the maximum number of Wi-Fi devices is shared between Main Wi-Fi and Guest
Wi-Fi.)
Note: Your gateway is factory preset to allow a maximum of 64 Wi-Fi devices
Note: If you change the Max Wi-Fi Devices value, the Main Wi-Fi and Guest Wi-Fi values
automatically adjust to match the new total.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi > Options.
5. Beside Max Wi-Fi, select the total number of Wi-Fi devices that can connect to your
device at the same time.
Note: The Main Wi-Fi limit cannot be set to 0.
6. Click Submit.
Wireless Distribution System (WDS)
The gateway can act as a wireless base station or a wireless repeater in a wireless distribution
system (WDS).
A WDS expands a wireless network through multiple access points. A wireless base station
connects to the Internet, can have wired and wireless clients, and sends its wireless signal to an
access point that functions as a wireless repeater. A wireless repeater can also have wired and
wireless clients, but connects to the Internet through the wireless base station. The following
figure shows a wireless repeating scenario.
To use the wireless repeating function, your gateway cannot have security enabled and cannot
use the auto channel feature.
You must set up a wireless base station and a wireless repeater:
Your Network Connections
35
●
Wireless base station. The router acts as the parent access point that bridges traffic to
and from the child repeater access point. The base station also handles wireless and
wired local computers. To configure this mode, you must know the MAC addresses of
the child repeater access point. Often, the MAC address is on the product label.
●
Wireless repeater. The router sends all traffic from its local wireless or wired computers
to a remote access point. To configure this mode, you must know the MAC address of
the remote parent access point.
The gateway is always in dual-band concurrent mode, unless you turn off one radio. If you
enable the wireless repeater in either radio band, the wireless base station or wireless repeater
cannot be enabled in the other radio band. However, if you enable the wireless base station in
either radio band and use the other radio band as a wireless router or wireless base station,
dual-band concurrent mode is not affected.
Before you can set up a wireless network with WDS, both access points must meet the following
conditions:
●
Use the same SSID, wireless channel, and encryption mode.
●
Be on the same LAN IP subnet. That is, all of the access point LAN IP addresses are in
the same network.
●
All LAN devices (wired and wireless computers) are configured to operate in the same
LAN network address range as the access points.
Set Up the WDS Base Station
You can use the Wireless Repeating Function to set up the base station for a wireless
distribution system (WDS).
The wireless repeating function works only in hub and spoke mode. The units cannot be daisychained. You must know the wireless settings for both units. You must know the MAC address
of the remote unit. First, set up the base station, then set up the repeater.
To set up the base station:
Both units must be set up using the same wireless settings. The wireless network name (SSID)
and the wireless mode must be the same and the wireless security option must be set to None.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Your Network Connections
36
4. Click Settings > Wireless Repeating Function.
5. Select the Enable Wireless Repeating Function check box.
6. Select the Wireless Base Station radio button.
7. To prevent wireless clients from associating with the base station and allow LAN client
associations only, select the Disable Wireless Client Association check box.
Note: You can leave the check box cleared if you prefer wireless clients to be able to
associate with the base stations.
8. In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the
access points that should function as repeaters.
9. If your gateway is the base station, it can function as the “parent” for up to four other
access points.
10. Click Submit.
Your changes are saved.
Set Up a WDS Repeater
You can use the Wireless Repeating Function to set up a repeater for a wireless distribution
system (WDS).
Note: Set up the WDS base station first. See Set Up the Base Station.
Your Network Connections
37
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
If you are using the router as the base station with a different brand of router or gateway as the
repeater, you might need to change more configuration settings. In particular, disable the DHCP
server function on the access point that is the repeater.
To configure the gateway as a repeater:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Wireless Repeating Function.
5. Select the Enable Wireless Repeating Function check box.
6. In the Repeater IP Address field, type the IP address of the repeater router.
Note: This IP address must be in the same subnet as the base station, but different from
the LAN IP address of the base station.
7. To prevent wireless clients from associating with the repeater and allowing LAN client
associations only, select the Disable Wireless Client Association check box.
Note: You can leave the check box cleared if you prefer wireless clients to be able to
associate with the repeater.
8. In the Base Station MAC Address field, enter the MAC addresses for the access point
that will be the base station.
9. Click Submit.
10. Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the gateway can connect to the Internet or
share files and printers with any other computer or server connected to the other access point.
GPS Page
From the GPS page, you can obtain your current location coordinates (latitude, longitude,
altitude, etc.).
You can also enable or disable GPS tracking, and choose the tracking method being used (onetime or continuous).
Your Network Connections
38
Your gateway provides GPS functionality to help you figure out where you are and get you
where you’re going.
There are a couple of requirements to access the GPS service.
●
You must accept the GPS privacy agreement.
●
GPS must be enabled.
The GPS service may not be available if you are indoors. (You may be able to get a GPS lock if
your device is very close to a window.) GPS receivers must be able to lock onto the global
positioning satellites to accurately determine position. The number of obstructions present
indoors often makes accurate position determination impossible.
To view or change the GPS settings:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click GPS.
You can:
●
Start or Stop tracking (if GPS Mode is Continuous)
Your Network Connections
39
●
Update the current location information (if GPS Mode is One-time)
Note: The first time that you access GPS, you will be prompted to read and accept the
Location-Based Services (LBS) end user license agreement. You must accept the agreement
before you can use the GPS feature.
Note: For best results, minimize the number of obstructions between your device and the GPS
satellites.
The following information is displayed.
Item
Description
Most recent position fix
Update location /
Cancel
or
Start / Stop
If the GPS Mode is:
●
One-time: Click Update location to get a location fix, or click
Cancel to stop waiting for the fix to complete.
●
Continuous: Click Start to begin tracking and refreshing the
location fix information regularly, or click Stop to stop tracking.
Status
Message indicating what the GPS system is doing (For example,
“Tracking a fix”, “Searching for satellites”, “Inactive”)
Time of fix
This is the date and time that the last fix was taken.
Latitude
Latitude at time of last fix. (For example, “N32.51.73”)
Longitude
Longitude at time of last fix. (For example, “W105.11.7”)
Altitude
Elevation at time of last fix. (For example, “40 meters”)
Speed
Speed at which device was moving at time of last fix. (For example,
“3.1 mph”)
Heading
Direction in which device was moving at time of last fix. (For example,
“East”)
Satellites
The number of satellites used to get the last fix.
GPS Settings
Enable GPS
Turns the GPS service on or off. See Enabling / Disabling GPS.
Note: For best results, minimize the number of obstructions between
your device and the GPS satellites.
Use Metric units
This setting specifies whether to use metric units when displaying the
GPS results (for example, for altitude, speed, and HEPE). See Using
Metric Units.
GPS mode
This setting determines how often your device should obtain a fix. See
Setting the GPS Mode.
Your Network Connections
40
●
One-time – A single fix is used. Use this option if you’ll be using
your device at the same location.
●
Continuous – Fixes are obtained every few seconds (also
known as auto-tracking). This is useful for turn-by-turn (TBT)
navigation applications, such as driving directions, and for
NMEA-enabled applications.
Enable or Disable GPS
Before you can access GPS services, you must enable GPS on the gateway’s GPS page.
To enable or disable GPS:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click GPS.
5. In the GPS Settings section, select the Enable GPS check box (or clear the check box
to disable GPS).
6. Click Submit.
Set the GPS Mode
The GPS mode determines how often location fixes are done.
Location fixes can be done:
●
Once (“one-time”, which can prolong the battery life), or
●
Periodically (“continuous”)
You can set the GPS mode on the gateway’s GPS page:
To set the GPS mode:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
Your Network Connections
41
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click GPS.
5. In the GPS Settings section beside GPS Mode, select the desired mode (One-time or
Continuous).
6. Click Submit.
Note: The GPS service must be enabled before you can set the GPS mode. (See Enabling /
Disabling GPS.)
Use Metric Units for GPS
You can use metric units in the display of location information (for example, speed and altitude).
You can choose the units on the gateway’s GPS page.
Note: The GPS service must be enabled before you can choose the units. (See Enabling /
Disabling GPS.)
To specify metric units for the GPS:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click GPS.
5. In the GPS Settings section beside Use Metric units, select Yes (or select No to use
standard measurements).
6. Click Submit.
Dynamic DNS
Learn about Dynamic DNS (DDNS), a service that lets you access your gateway by using a host
name or domain.
A Dynamic DNS (DDNS) service provides a central public database where information (such as
e-mail addresses, host names, and IP addresses) can be stored and retrieved. The Dynamic
DNS server also stores password-protected information and accepts queries based on e-mail
addresses.
Your Network Connections
42
If you want to use a DDNS service, you must register for it. The Dynamic DNS client service
provider will give you a password or key.
Note: The gateway supports only basic DDNS, and the login and password might not be
secure. If you have a private WAN IP address, do not use DDNS service as it can lead to
problems
To set up DDNS:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Dynamic DNS.
5. If you have registered with a DDNS service provider, select the Use a Dynamic DNS
Service check box.
6. Select the name of your Dynamic DNS service provider.
7. Type the host name that your Dynamic DNS service provider gave you. (The DDNS
service provider might call this the domain name.)
8. Type the user name for your DDNS account.
9. Type the password (or key) for your DDNS account.
10. Click Submit.
Your Network Connections
43
File Sharing for USB Drives
You can connect a USB drive to the gateway’s USB port and share it with others on your
network.
You can specify how you want file sharing to be managed for files on a USB device attached to
the gateway USB port.
To set up file sharing for a USB drive:
1. Connect a USB drive to the USB port on your gateway.
2. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
3. In the address or URL field of your browser, type http://myrouter.
4. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
File Sharing for USB Drives
44
5. Click Settings > File Sharing.
6. To allow file sharing, select Enable in the File Server field.
When this feature is enabled, all of the files on the USB drive are available as Windows
Shared Files to other devices on the local area network (LAN). Shared files are not
available to clients on the Internet outside of the local network.
7. In the Domain Name field, specify the network name.
This feature allows a computer on the LAN to access the share with a name rather than
the IP address. The Host Name displays in the Windows Network on local network
computers. Files can be accessed with the routers IP address (for example,
\\192.168.15.1), the hostname (for example, \\dslrouter), or the link in the network
neighborhood.
8. In the File Share Users, specify user names and passwords for access to network file
shares.
With this feature, anyone who tries to access the files on the USB device must enter a
user name and password. Each user can be set to read only or have write access to the
files on the USB drive. Existing passwords cannot be viewed. You must change it if it is
forgotten.
File Sharing for USB Drives
45
9. To add a user, click the Add button and type the user name and password.
10. To edit a user’s credentials or password, click the user name.
File Sharing for USB Drives
46
Gateway Settings
Manage the gateway settings.
Settings
From the Settings page, you can configure your device, network, and router settings.
General
From the General page, you can configure your device’s LED status indicators, the gateway’s
(web browser) URL and administrator password.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Gateway Settings
47
4. Click Settings > General.
The following information is displayed.
Item
Description
Router LED
Router LED
Indicates whether the LEDs are used (On) or not (Off). See Turning the
LED On or Off.
Homepage
(Web UI name)
URL
The URL used to show the homepage. See Changing the Gateway’s
URL.
Set Password
The password used to show the homepage. See Changing the
Password.
General > Software and Reset
From this page, you can save your current device settings and restore them later, update your
software, reset your device to default settings, and set your device startup options.
Gateway Settings
48
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Software and Reset.
You can:
●
Back up and restore your gateway’s configuration, if needed. See Export Settings and
Import Settings.
●
Update your gateway’s software. See Update the Software and Firmware.
●
Reset some or all of your gateway’s settings. See Reset Device Settings Only, Reset the
Gateway to Factory Default Settings, and Clear Account Details Only.
Gateway Settings
49
The following information is displayed.
Item
Description
Download /
Backup
Click Save to make a copy (export) of the gateway’s current
configuration, so that you can restore it later if needed. See Exporting
Settings.
Restore Settings
Click Choose file to use a previously saved copy of your device
configuration. See Importing Settings.
Software Update
Click Check for update to see if a new version of software has been
released and if there is, download and install it. The last time you
checked is shown on the screen (Last checked at). See Update the
Software and Firmware.
Note: Software downloads count against your plan’s data limit.
Firmware Update
Click Upload to see if a new version of your device’s firmware has been
released, and if there is, download and install it.
Factory Reset
Click to reset your device to factory default settings and clear your
account details. See Reset the Gateway to Factory Default Settings.
(You can only do this with assistance from Sprint.)
Reset
Settings Reset – Click to reset your device to factory default settings,
but leave your Sprint account details unchanged. See Reset Device
Settings Only.
Clear Programming – Click to clear your account details. See Clear
Account Details Only.
General > System Logs
Technical support staff may need you to configure system logging in this page for the purpose
of error diagnosis.
Note: You should only adjust settings on this page under the direction of technical support staff.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Gateway Settings
50
4. Click Settings > General > System Logs.
You can:
●
Stop Capturing Logs
●
Save as a File
●
Clear logs
General > Date & Time Settings
Configure the date and time settings.
Gateway Settings
51
To specify the date and time settings:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Date & Time.
Note: The Local Time field displays the local time.
5. In the Time Zone field, select the time zone.
6. If your location uses daylight saving, select the Daylight Saving Time check box.
■
Selecting this check box enables daylight saving time. If the current time falls within
the daylight saving period, then daylight saving time takes effect. The Start and End
fields display.
7. If needed, change the settings in the Start and End fields.
8. Select or clear the Automatic Time Update check box.
Gateway Settings
52
■
This check box enables or disables the NTP server. You can edit the first NTP server
entry and you can add, remove, or edit a second NTP server.
9. Click Submit.
Your changes are saved.
General > MAC Address Cloning
Your computer's local address is its unique address on your network. This is also referred to as
the computer's MAC (Media Access Control) address. The format for the MAC address is
XX:XX:XX:XX:XX:XX.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > MAC Address Cloning.
5. If your ISP does not require MAC authentication, select Use Default MAC Address.
6. If your ISP requires MAC authentication, select one of the following:

Use Computer MAC address. Disguise the router's MAC address with the MAC
address of the computer that you are currently using to configure the gateway.

Use This MAC Address and manually type the MAC address. Disguise the
router's MAC address with the MAC address of another computer (not the one that
you are currently using).
7. Click Submit.
Gateway Settings
53
General > Remote Management
The remote management feature lets you access your gateway over the Internet to view or
change its settings.
You need to know the gateway’s WAN IP address to use this feature.
Tip: Be sure to change the password for admin to a secure password. The ideal password
contains no dictionary words from any language and contains uppercase and lowercase letters,
numbers, and symbols. It can be up to 30 characters. See Change the admin Password.
To set up remote management:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Remote Management.
5. Select the Turn Remote Management On check box.
Gateway Settings
54
6. In the Allow Remote Access By section, specify the external IP addresses to be allowed
to access the gateway’s remote management:
7. For enhanced security, restrict access to as few external IP addresses as practical
8. Select one of the following:

To allow access from a single IP address on the Internet, select the Only This
Computer radio button. Enter the IP address to be allowed access.

To allow access from a range of IP addresses on the Internet, select the IP Address
Range radio button. Enter a beginning and ending IP address to define the allowed
range.

To allow access from any IP address on the Internet, select the Everyone radio
button.
9. Specify the port number for accessing the web browser interface.
■
Normal web browser access uses the standard HTTP service port 80. For greater
security, enter a custom port number for the remote web management interface.
Choose a number from 1024 to 65535, but do not use the number of any common
service port. The default is 8080, which is a common alternate for HTTP.
10. Click Submit.
To use remote access:
1. Launch a Web browser on a computer that is not on your home network.
2. Type your gateway’s WAN IP address into your browser’s address or location field
followed by a colon (:) and the custom port number.
For example, if your external address is 134.177.0.123 and you use port number 8080, enter
http://134.177.0.123:8080 in your browser.
Network > Setup
From the Network Setup page, you can specify how the gateway selects mobile networks and
roaming, and receive network configuration updates from Sprint.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Gateway Settings
55
4. Click Settings > Network.
You can:
●
Configure network selection and roaming options.
●
Check the network for a new Preferred Roaming List.
The following information is displayed.
Item
Description
Network Mode
The type of network that your device can connect to. See Setting the
Allowed Network Mode.
Roaming Mode
The areas in which your device can roam. See Setting the Roaming
Mode.
Gateway Settings
56
Roaming Guard
If selected, the roaming areas where a warning will appear when you
enter them. See Enabling / Disabling the Roaming Guard Warning
Message.
Update PRL
Click to check if a new PRL (Preferred Roaming List) is available on the
network, and use it to update your device.
Update Network
Settings
Click to re-run HFA (Hands Free Activation).
Manual
Configuration
Use only when instructed by Sprint.
Advanced
Settings
Use only when instructed by Sprint.
Network > Access Point Name
In this page, you can add, modify, or remove access point names (APN)s for the networks you
want to connect to.
To connect to a carrier’s network when roaming, your device must be configured with an Access
Point Name (APN) for that carrier. The APN is checked by the carrier to determine the type of
network connection to establish.
Note: Your gateway comes with the APN for Sprint preconfigured.
To view or change the access point names:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Gateway Settings
57
4. Click Settings > Network > APN.
To add (or modify) an APN, see Configuring Access Point Names.
The list of all APNs that have been set up includes the following information.
Item
Description
Active
The access point currently in use. Only one access point can be marked
as active.
Name
Network carrier name (for example, “Sprint”).
APN
The operator’s access point name (obtained from the operator).
Username
If required, the username (obtained from the operator) used to connect
to the APN.
Password
If required, the password (obtained from the operator) used to connect
to the APN.
Authentication
The network authentication code (None, PAP, CHAP, PAP or CHAP).
Network > SIM Security
If you are using a SIM that has security enabled, you can disable SIM Security from this page.
This page shows the current status of this security feature, and allows you to disable SIM
security if it has been enabled.
Gateway Settings
58
Note: The SIM PIN is required to disable SIM Security.
To disable SIM security:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Network > SIM Security.
5. If the SIM has security enabled, SIM Security will be Active. Click Disable to disable SIM
security.
The following information is displayed.
Item
Description
SIM Security
The current state of the SIM PIN feature (Inactive or Active). Click
Disable to disable SIM security.
Network > Status Details
This page shows you details about the current mobile broadband connection (3G or LTE).
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Gateway Settings
59
4. Click Settings > Network > Status Details.
The information that is displayed depends on your current connection.
4G/LTE Details
Item
Description
Connected Status
Indicates whether you are connected to an LTE network.
Service type
Indicates the LTE service type.
RSRP
The signal strength of the LTE network. (Reference Signal Received
Power)
RSRQ
The siqnal quality of the LTE network (Reference Signal Received
Quality). RSRQ is the ratio between the RSRP and the Received Signal
Strength Indicator (RSSI).
RS-SINR
Signal to Interference Noise Ratio based on Reference Signals
(narrowband and wideband)
PLMN ID
Gateway Settings
60
Serving Cell
TX Power
The transmitter power. A higher number is better.
IP Address
The IP address of the 4G LTE connection.
Channel UL
The channel that is used to upload to the 4G LTE network.
Channel DL
The channel that is used to download from the 4G LTE network.
IMSI
The International Mobile Station Identity is an identifier of a device on
the network.
Band
The LTE band being used for the connection.
Last Error Code
Technical support staff may request this value from you.
ICCID
The Integrated Circuit Card ID.
3G Details
Item
Description
Status
Indicates whether you are connected to a 3G network.
PS service type
Indicates the 3G service type (for example, CDMA, HRPD,
CDMA_HRPD).
IP Address
The IP address of the 3G connection.
Coverage Type
The type of 3G network available.
RSSI
Signal strength of the network.
Ec/Io
Dimensionless ratio of the average power of a channel, typically the pilot
channel, to the total signal power.
MDN
Mobile Directory Number. This is your 10-digit telephone number.
MSID
Mobile Station Identifier.
DRC Cover
Digital Rate Control Cover.
DRC Value
Digital Rate Control Value.
Gateway Settings
61
Channel
DRC Channel number.
Roaming
Indicates if you are roaming on Sprint, domestically, or internationally.
PRL Version
Preferred Roaming List version. To update the PRL, see Network Page.
1xRTT PN
Technical support staff may request this value from you.
EVDO PN
Technical support staff may request this value from you.
PRev
Technical support staff may request this value from you.
Rx Power
Technical support staff may request this value from you.
Serving SID
The Serving System ID identifies your home network area and is used to
determine if you are ‘home’ or ‘roaming’.
NID
Technical support staff may request this value from you.
Packet Zone ID
Technical support staff may request this value from you.
Frame Error Rate
Used to determine the quality of a signal connection. Technical support
staff may request this value from you.
Subnet Color
Code
Technical support staff may request this value from you.
AN-AAA
Technical support staff may request this value from you.
Packet Error Rate
Technical support staff may request this value from you.
MIP Error Code
The Mobile IP Error Code. Technical support staff may request this
value from you.
Network > Broadband Settings (Dual WAN)
This page is used to configure the broadband dual WAN Settings.
The default setting is to always use mobile broadband.
To specify broadband settings:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
Gateway Settings
62
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Network > Broadband Settings.
Available options are:
●
Used Fixedline Connection first if fails use Mobile Broadband Connection.
●
Always use Fixedline Broadband Connection.
●
Always use Mobile Broadband Connection
Router > Basic
From this page you can configure the router’s UPnP feature, LAN settings, and DMZ settings.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Gateway Settings
63
4. Click Settings > Router > Basic.
5. You can make changes to any of these fields. When you finish, click Submit.
The following information is displayed.
Item
Description
UPnP
UPnP
Gateway Settings
Current state of the Universal Plug and Play feature (On or Off). (See
UPnP (Universal Plug and Play).)
64
LAN
IP Address
The routing hardware’s IP address on the LAN.
Netmask
The routing hardware’s internal LAN subnet mask.
DHCP Server
This field enables (On) or disables (Off) DHCP. See DHCP.
DHCP IP Range
This specifies the starting and ending address of the range of IP
addresses available for your device to dynamically (that is, not
permanently) assign to computers connected to it. See DHCP.
DHCP Lease Time
This is the amount of time, in minutes, a computer can use its assigned
IP address before it is required to renew the lease. After this time is up,
the computer is automatically assigned a new dynamic IP address. See
DHCP.
Enter a number between 2 and 10080.
DNS Mode
This specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
Manual: The routing hardware assigns DHCP clients the DNS servers
specified in the DNS 1 and DNS 2 fields
Use this option to access a DNS server that provides customized
addressing or if you have a local DNS server on your network.
Note: The DNS 1 and DNS 2 fields appear only if DNS Mode is Manual.
Auto: The DNS server specified by Sprint is used.
DMZ
DMZ On/Off
Enable / disable demilitarized zone.
DMZ Address
If DMZ is enabled, this is the IP address of a single computer used to
receive all unsolicited incoming connections.
Submit
Router > Port Forwarding
Port forwarding lets you forward incoming traffic to specific ports and devices (per their local IP
address) on your network. (Normally, incoming traffic is blocked.)
Gateway Settings
65
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Port Forwarding.
You can:
●
Enable or disable port forwarding. See Enable Port Forwarding.
Note: You must enable port forwarding before you can view and update the port forwarding list.
●
●
Enter port forwarding details for an application. (See Enable Port Forwarding for an
Application.)
For example, you can configure port forwarding so that:

You can access your Remote Desktop from the Internet (by specifying the WAN
[public] IP address that your device is using).

Internet users can access a Web, FTP, or email server, or gaming or Internet
application hosted by your computer.
Remove an application from the port forwarding list. (See Port Forward Panel: Disable
Port Forwarding for an Application.)
Note: Port forwarding creates a security risk. When not required, port forwarding should be
disabled.
Gateway Settings
66
Note: Port forwarding does not apply to normal browsing, file downloading, running most online
games or other applications hosted on the Internet. (Some online games require port
forwarding.)
The following information is displayed.
Item
Description
Port Forwarding
Indicates whether port forwarding is on (Enable) or off (Disable).
List of forwarded ports: This list appears only if port forwarding is on. Each port displays:
Name
A name describing the application using the port.
IP Address
The IP address of the server being accessed.
Port
The port that is forwarded. If the application uses more than one port,
each port must be forwarded separately.
Protocol
The protocol (TCP, UDP, etc.) being used for this application.
Actions
Router > Port Filtering
Port filtering lets you either allow (white list) or prevent (black list) which applications (for
example, http, ftp, email servers) can access the Internet.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Port Filtering.
You can:
Gateway Settings
67
●
Enable port filtering. (See Port Filtering Panel: Enable Port Filtering.)
●
Add an application to a port filtering list. (See Port Filtering Panel: Enable Port Filtering
for an Application.)
●
Remove an application from the port filtering list. (See Port Filtering Panel: Disable Port
Filtering for an Application.)
The following information is displayed.
Item
Description
Port Filtering
Indicates which type of filtering is being used.
●
No Filtering: All applications are allowed to access the Internet.
●
Black List: Applications in the list are not allowed to access the
Internet.
List of filtered ports: This list appears only if port filtering is on. Each port displays:
Name
A name describing the application using the port.
Port
The port that the application uses to access the Internet.
Protocol
The protocol (TCP, UDP, etc.) being used by the application.
Actions
Router > Address Reservation
Address reservation lets you specify a specific IP address that the gateway assigns to a
computer or device when it connects to the gateway’s local area network (LAN).
When you specify a reserved IP address for a computer on the gateway’s local area network
(LAN), that computer always receives the same IP address each time it accesses the DHCP
server. Reserved IP addresses should be assigned to servers that require permanent IP
settings.
To reserve an IP address:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Gateway Settings
68
4. Click Settings > Router > Address Reservation.
5. Click the
Add button.
6. Select the radio button of the computer in the Reservation Table.
7. If the computer is not on the Address Reservation Table, enter the IP address, MAC
address, and device name of the computer you want to add.
8. Click the
Add button when finished.
To edit a reserved IP address:
1. Select the radio button next to the reserved address.
2. Click the Edit button.
3. Edit the IP address, MAC address, or device name.
4. Click the Accept button when finished.
To delete a reserved IP address:
1. Select the radio button next to the reserved address.
2. Click the
Delete button.
Error! Bookmark not defined. Router > ALG
This page is used to configure the ALG Services.
Note: When the firewall level is set to High, some services may not be configurable.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
Gateway Settings
69
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > ALG.
5. Select the check boxes for the ALG services that you want.
6. Click the Apply button.
Firewall Rules
The Firewall Rules page sets the level of security on your local network.
You can:
●
Specify the security level for your network
●
Enable or disable Port Scan
●
Enable or Disable DoS protection
Gateway Settings
70
To specify the firewall security level:
All security levels, except “None,” protect against known Internet attacks and attempts at remote
access to your modem.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Firewall Rules.
6. Select the radio button for the security level that you want.
7. Click the Apply button.
The following settings are available.
Item
Description
High
The high security setting only allows basic Internet functionality. The
High security setting guarantees to only pass Mail, News, Web, FTP,
IPSEC and Telnet. All other traffic is not allowed. High security restricts
modification by NAT configuration options.
Medium
The medium security setting only allows basic Internet functionality by
Gateway Settings
71
default, just like High level security. Medium security, however, allows
customization through NAT configuration so certain traffic can pass
Low
The low security setting will allow all traffic except for known attacks.
With low, your modem is visible by other computers on the Internet
Custom
Custom is an advanced configuration option that allows you to edit the
firewall configuration directly. Only expert users should attempt this
To enable or disable Port Scan:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Firewall Rules.
5. Select or clear the Enable Port Scan check box.
6. Click the Apply button.
To enable or disable Denial of Service (DoS) protection
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Firewall Rules.
5. Select or clear the Enable DoS Protection check box.
6. Click the Apply button.
Support
This page provides links to resources that can help you use your device and manage your
Sprint account.
Gateway Settings
72
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click the Support link in the top right corner.
The following information is displayed.
Item
Description
User Guide
Open an online copy of this guide in a new Web browser window or tab.
(You must be connected to the Internet to use this link.)
Web
Click the link to open the online support website in a new Web browser
window or tab where you can find a variety of resources to help you with
your gateway. (You must be connected to the Internet to use this link.)
Manage Account
Contact Sprint Customer Service by telephone (for business use or
personal use).
Voice Your
Feedback
Send NETGEAR your comments on your device. See Feedback Page.
About
View information about your device and account.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
Gateway Settings
73
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click the About link in the top right corner.
You can:
●
Save the image on this page to a file on your computer. Click Save as a file.
The following information is displayed.
Item
Description
Account Details
My number
The gateway’s telephone number.
IMEI
International Mobile Equipment Identify number.
ICCID
The serial number of the SIM.
Gateway Settings
74
Wi-Fi Details
Wi-Fi Name
The Main Wi-Fi network name. (See also Change Wi-Fi Network Names
and Passwords.)
Wi-Fi MAC
Address
The MAC address of the LTE module. Each wireless device has a
unique MAC address (assigned by its manufacturer).
Wi-Fi Security
Type
The security standard used for the Wi-Fi network. (See Wi-Fi Security.)
Wi-Fi Range
SSID Broadcast
Indicates whether the SSI D (Wi-Fi network name) is being broadcast.
(See Options Section.) You could choose to not broadcast, and give the
Wi-Fi name directly to users.
Firmware
Firmware Version
The gateway’s firmware version.
Build Date
The date the firmware version was created.
PRI Version
The PRI version.
Network Status
View Details
Click the link to jump to the Network > Status Details Page.
Feedback
Use the links on this page to send your comments on your device, look up support information,
and participate in a customer survey.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click the Feedback link in the bottom left corner of any page.
Gateway Settings
75
The following information is displayed.
Item
Description
Connect with us
Facebook
Click to view the AirCard Facebook page in a new browser window or
tab. (Your device must be connected to the network for this option to
work.)
Twitter
Click to view the AirCard Twitter feed in a new browser window or tab.
(Your device must be connected to the network for this option to work.)
Product Support
User Guide
Open an online version of this user guide in a new window or tab.
FAQs
Read frequently asked questions and answers.
Survey
Customer
Feedback Survey
Participate in a NETGEAR customer survey.
Ethernet WAN Settings
Your gateway has an Ethernet WAN port on the rear panel. You can use an Ethernet cable to
connect the gateway to Internet service.
Connect the Ethernet WAN Port
You can connect the gateway to a cable or DSL modem with an Ethernet cable and set up the
router to use that modem’s Internet service instead of the mobile service.
To install the gateway with an Ethernet Internet connection:
1. Prepare your modem.

Unplug your modem’s power.

If the modem has a battery backup, remove its batteries.

If your modem was already connected to another router, disconnect the cable
between your modem and that router.

Make sure that your modem is turned off and is cabled only to the wall jack for your
Internet service.
Gateway Settings
76
2. Connect your modem.
3. Plug in, then turn on your modem. (Replace the batteries if you removed them.)
4. Use an Ethernet cable to connect your modem to the Ethernet WAN port of your
gateway.
5. Connect the power adapter to the gateway, and plug the power adapter into an outlet.
6. If no LEDs are lit, press the Power On/Off button on the rear panel of the gateway.

The Power

When the gateway connects to the Internet, the Ethernet WAN
LED lights.
LED lights.
Specify WAN Settings
The WAN Setup screen lets you configure advanced settings for the Ethernet WAN port.
To specify WAN settings:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Gateway Settings
77
4. Click Settings > General > WAN Setup.
5. Specify the following settings:
●
Disable Port Scan and DoS Protection. DoS protection protects your LAN against
denial of service attacks such as Syn flood, Smurf Attack, Ping of Death, Teardrop
Attack, UDP Flood, ARP Attack, Spoofing ICMP, Null Scan, and many others. This
feature should be disabled only in special circumstances.
●
Respond to Ping on Internet Port. If you want the gateway to respond to a ping from
the Internet, select this check box. Use this feature only as a diagnostic tool because it
allows your gateway to be discovered. Do not select this check box unless you have a
specific reason.
●
Disable IGMP Proxy. IGMP proxying allows a computer on the local area network
(LAN) to receive the multicast traffic it is interested in from the Internet. If you do not
need this feature, you can select this check box to disable it.
●
MTU Size (in bytes). The normal MTU (maximum transmit unit) value for most Ethernet
networks is 1500 bytes, or 1492 bytes for PPPoE connections. For some ISPs, you
might need to reduce the MTU. Reduce the MTU only if you are sure that it is necessary
for your ISP connection.
6. Click Submit.
MTU Size
Learn about maximum transmission unit (MTU) size and how to change this setting.
The maximum transmission unit (MTU) is the largest data packet a network device transmits.
When one network device communicates across the Internet with another, the data packets
travel through many devices along the way. If a device in the data path has a lower MTU setting
than the other devices, the data packets must be split or “fragmented” to accommodate the
device with the smallest MTU.
Gateway Settings
78
The best MTU setting for your gateway is often the default value. In some situations, changing
the value fixes one problem but causes another. Leave the MTU unchanged unless one of
these situations occurs:
You have problems connecting to your ISP or other Internet service, and the technical support
of either the ISP recommends changing the MTU setting. These web-based applications might
require an MTU change:
●
A secure website that does not open, or only part of a web page displays
●
Yahoo! Mail
●
MSN portal
●
America Online’s DSL service
●
You use VPN and have severe performance problems.
●
You used a program to optimize MTU for performance reasons, and now you have
connectivity or performance problems.
●
An incorrect MTU setting can cause Internet communication problems. For example, you
might not be able to access certain websites, frames within websites, secure login
pages, or FTP or POP servers.
If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are
willing to experiment, you can gradually reduce the MTU from the maximum value of 1500 until
the problem goes away. The following table describes common MTU sizes and applications.
The following table lists common MTU sizes.
MTU Size
Application
1500
The largest Ethernet packet size. This setting is typical for connections that
do not use PPPoE or VPN, and is the default value for NETGEAR gateways,
adapters, and switches
1492
Used in PPPoE environments
1472
Maximum size to use for pinging. (Larger packets are fragmented.)
1468
Used in some DHCP environments.
1460
Usable by AOL if you do not have large email attachments, for example.
1436
Used in PPTP environments or with VPN.
1400
1400
Gateway Settings
Maximum size for AOL DSL.
79
576
576
Typical value to connect to dial-up ISPs.
Change the MTU Size
The default MTU size usually works, but you can change the MTU size.
To change the MTU size:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > WAN Setup.
5. In the MTU Size field, enter a value from 64 to 1500.
6. Click Submit.
LED Settings
By default, the LEDs are on because they are status indicators. You can log in to the gateway
and turn the LEDs off and on.
To turn the LEDs off and on:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Device.
5. Beside LED, select On or Off as desired.)
6. Click Submit.
Router Settings
Adjust your gateway’s router settings through the Basic, Port Forwarding, and Port Filtering
pages.
Gateway Settings
80
UPnP (Universal Plug and Play)
UPnP provides simple and robust connectivity among consumer electronics, intelligent
appliances, and mobile devices from many different vendors. (For more information, see
upnp.org.)
Note: If UPnP is enabled, there are potential security risks.
To enable UPnP:
Before you can use UPnP, you must enable it.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Basic.
5. Next to UPnP, select On.
6. Click Submit.
DHCP
DHCP (Dynamic Host Control Protocol) automatically assigns an IP address to each device on
the network and manages other network configuration information for devices connected to your
network. You do not need to manually configure the IP address on each device that’s on your
network.
The assigned IP addresses are not permanent (as opposed to when using static IP).
Most ISPs (Internet Service Providers) use DHCP.
Normally, you should enable DHCP, in which case you must configure each device on the
network with one of the following:
●
TCP/IP settings set to “Obtain an IP address automatically.”
●
TCP/IP bound to the Ethernet connection with DHCP.
If DHCP is disabled, you must configure each device on the network with:
●
Fixed (permanent/static) IP address.
●
DNS server addresses (provided by Sprint).
Error! Reference source not found.
81
To enable DHCP:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Basic.
5. Next to DHCP Server, select Enabled.
6. You can set the following DHCP settings:
●
DHCP IP Range: This is the starting and ending address of the range of IP addresses
available for your device to dynamically (that is, not permanently) assign to computers
connected to it.
The start address must be 192.168.0.10 or above and the ending address must be
192.168.0.50 or below.
●
DHCP Lease Time: This is the amount of time, in minutes, a computer can use its
assigned IP address before it is required to renew the lease. After this time is up, the
computer is automatically assigned a new dynamic IP address.
Note: Enter a number between 2 and 10080.
●
DNS Mode — This specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained. (See DNS Mode.)
7. Click Submit.
DNS Mode
The DNS Mode setting specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Basic.
5. Set DNS Mode to one of the following:
Error! Reference source not found.
82

Auto: The DNS server specified by Sprint is used.

Manual: The routing hardware assigns DHCP clients the DNS servers specified in
the DNS 1 and DNS 2 fields. (These fields appear when Manual is selected.)
Use this option to access a DNS server that provides customized addressing or if
you have a local DNS server on your network.
6. Click Submit.
Enable Port Forwarding
Before you can use or configure Port Forwarding, you must enable it.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Port Forwarding.
5. Next to Port Forwarding, select Enable.
6. Click Submit.
Enable Port Forwarding for an Application
You can enable port forwarding for certain application types.
Note: Port forwarding must currently be enabled. (See Enabling Port Forwarding.)
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Port Forwarding.
5. In the blank row of the list, enter a Name that describes the application (for example,
“RandomEmailApp”).
6. In the IP field, enter the IP address of the server to be accessed.
7. In the Port field, enter the port used by the application. (If the application uses more than
one port, each port must be forwarded separately.)
Error! Reference source not found.
83
8. In the Protocol list, click the protocol(s) used for this application (TCP, UDP).
9. Click the
to add this row to the list.
10. Click Submit.
Disable Port Forwarding for an Application
If you want to stop forwarding any ports, you can remove them from the forwarding list.
Note: Port forwarding must currently be enabled. (See Enabling Port Forwarding for an
Application.)
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Port Forwarding.
5. Click the
beside the row that you want to remove.
6. Click Submit.
DMZ – General
You can select one computer to receive all unsolicited incoming connections.
The IP address of the DMZ (“demilitarized zone”) is the default recipient of incoming packets
(from the Internet) that are not handled by port forwarding rules or NAT’d connections:
●
If port forwarding is enabled, incoming traffic is routed according to the port forwarding
rules or NAT’d connections.
●
If incoming traffic was not routed as a result of the above:

If DMZ is enabled, then incoming traffic is routed to the computer that uses the IP
address specified by the DMZ settings.

If DMZ is not enabled, the incoming traffic is blocked.
Note: Putting a computer in the DMZ opens all the ports of that computer, and exposes that
computer to various security risks. Use this option only as a last resort — if possible, use other
options instead (for example, port forwarding).
Enable DMZ
Before you can use or configure DMZ, you must enable it.
Error! Reference source not found.
84
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Basic.
5. Next to DMZ Enabled, select ON.
6. Click Submit.
Configure DMZ
Specify which computer is to receive all unsolicited incoming connections.
Note: DMZ must currently be enabled. (See Enable DMZ.)
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Basic.
5. In the DMZ Address, enter the IP address of the computer that you want exposed to
the Internet. (If you don’t know how to find the IP address, see Finding the IP Address.)
Enable Port Filtering
Before you can use or configure Port Filtering, you must enable it.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Port Filtering.
5. In the Port Filtering list, select Black List to prevent specific applications from using the
Internet.
6. Click Submit.
Error! Reference source not found.
85
Enable Port Filtering for an Application
You can enable port filtering for certain application types.
Note: Port Filtering must currently be enabled. (See Port Filtering Panel: Enabling Port
Filtering.)
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Port Filtering.
5. In the Name field, enter a name that describes the application being filtered (for
example, “RandomEmailApp”).
6. In the Port field, enter the port used by the application.
7. In the Protocol list, click the protocol(s) used for this application (TCP, UDP, or both).
8. Click the
to add this filter to the list.
9. Click Submit.
Disable Port Filtering for an Application
If you currently have port filtering enabled and some ports already in the list (Black List or White
List), you can remove any of those rows.
Note: Port Filtering must currently be enabled. (See Port Filtering Panel: Enable Port Filtering.)
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router > Port Filtering.
5. Select Black List.
6. To remove an application from the list click the
remove.
Error! Reference source not found.
86
beside the row that you want to
7. Click Submit.
Login Settings
You can customize the URL that you use to log in to the gateway and you can change the
administrator password.
Change the Gateway URL
You may want to change the URL for the gateway to something more memorable.
To change the URL:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Device.
5. In the URL field (in the Homepage section), type the new value (maximum 31 letters
and numbers).
6. Click Submit.
Change the admin Password
For security reasons, you should change the gateway’s admin password on a regular basis.
It is strongly recommended that you enable password recovery, so that if you forget the
password you can recover it.
Note: If you forget the admin password and you have not enabled password recovery, you’ll
need to reset your device to its default settings and go through the device setup. (See What Do
I Do if I Forget the Administrator Password?)
To change the administrator password and enable password recovery:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Device.
Error! Reference source not found.
87
5. In the Old Password field, type the old password.
6. In the New Password field, type the new password (1–31 letters, numbers, and
symbols).
7. In the Confirm New Password field, type the new password again.
8. Select the Enable Password Recovery check box.
9. Select two security questions and provide answers to them.
10. Click Submit.
Error! Reference source not found.
88
Mobile Network Settings
View information about your mobile network activation, data usage, and settings.
View Network Activation Information
You can check whether network access is activated.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click About in the top right corner of the page.
5. Check the Activation Date in the WWAN Info section. This is the date that the gateway
was activated on the Sprint network.
View Data Usage
You can view an estimate of your data usage on your device’s home and Data Usage screens,
and on the gateway’s home page.
Note: The data usage shown is an estimate only and is not accurate for billing purposes.
Note: The session data counter resets automatically each time your device is powered off and
on, and when the mobile broadband network connection disconnects and reconnects (for
example, when going through a tunnel). The billing plan data counter resets automatically when
the next billing cycle starts.
To view an estimate of your data usage:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
The Data Usage Session section displays:
●
Amount of data used in the current session.
●
The length of time the connection has been active.
Mobile Network Settings
89
The Data Usage Billing Cycle section displays:
●
Total amount of data used in the current billing cycle, and amounts used for each
network type
●
Number of days remaining in the current billing cycle.
●
Date that the next billing cycle begins.
●
Check Carrier Usage – Click to connect to Sprint’s website and view detailed billing
plan information.
Network Settings
Adjust your device’s network settings to select the network types that can be connected, and set
roaming options.
Set the Roaming Mode
Use this feature to choose where your device can be used in roaming mode.
You can adjust this setting on your gateway’s Settings > Network > Setup page, using the
following options:
●
Sprint Only – Your device can be used only in Sprint service areas.
●
Domestic CDMA (Including Sprint) – Your device can roam only in North America.
●
Any Network – Your device can roam anywhere in the world.
To set the roaming mode:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Network.
5. Beside Roaming Mode, select the desired value.
6. Click Submit.
Mobile Network Settings
90
Enable or Disable the Roaming Guard Warning Message
Use this feature to have your device display a warning when you enter a roaming area.
To enable or disable the roaming guard warning message:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Network.
5. Beside Roaming Guard, select the warnings you would like to display (Domestic and/or
International).
6. Click Submit.
Set the Network Mode
Use this feature to select the types of networks that your device can connect to.
You can adjust this setting on the gateway’s Settings > Network page, to one of the following
options:
●
Automatic (LTE preferred) – The connection will be established on the fastest available
network.
●
LTE only – The connection can be established only on an LTE network. Your device
will not connect to CDMA networks.
●
CDMA only – The connection can be established only on a CDMA (3G) network. Your
device will not connect to LTE networks.
To set the network mode:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Network.
5. Beside Network Mode, select the desired network mode that your device can connect to.
Mobile Network Settings
91
6. Click Submit.
Configure Access Point Names
Your gateway comes preconfigured with the Access Point Name (APN) for Sprint.
To add an APN for another network:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Network > Access Point Names.
5. In the blank line, enter the APN details:
●
Active: If the new APN is going to be used now, select this button.
●
Name: Enter a short description (for example, the carrier name).
●
APN: Enter the APN you obtained from the carrier.
●
Username: Enter the username you obtained from the carrier (if required).
●
Password: Enter the password you obtained from the carrier (if required).
●
Select the Authentication mode to be used (None, PAP, CHAP, PAP or CHAP).
6. Click Submit
7. Click the
beside the new APN entry.
To select the APN to be used:
■
Select the Active button at the beginning of the entry.
To remove an APN from the list:
■
Click the
Mobile Network Settings
beside the APN entry.
92
Software and Reset
Export and Import Settings
You can save your gateway settings so that you can make changes to your configuration and, if
necessary, restore the original settings.
Export Settings
Settings include configuration information for your gateway and its Wi-Fi networks.
You can, for example, export (save) the current configuration, then make some changes and
test them. You can then import (restore) the saved configuration.
To export the settings to a text file:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Software and Reset.
5. In the Download / Backup Settings section, click Save as.
6. Save the file to an appropriate location in your computer. By default, the file (export.cfg)
is saved to your Downloads folder.
Import Settings
This feature lets you restore a saved configuration.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Software and Reset.
5. In the Restore Settings section, click Browse.
6. Navigate to the folder where your previously saved configuration file is stored.
Software and Reset
93
7. Click Open to restore your device with the imported settings.
Note: Your device may reset, and you may need to reconnect to Wi-Fi and the Internet. (See
How Do I Connect to Wi-Fi? and Launching Your Network Connection.)
Update the Software and Firmware
From time to time, updates may become available for your gateway, and your gateway will
receive an alert. You can also check for new updates manually.
The updates may improve performance and add or modify features. The updates may include
the following:
●
Firmware
●
Software
●
Other files
Download Software Updates
You can download software updates from your device or from the web page.
When a software update becomes available:
●
If your device is connected to Sprint’s LTE network, the update downloads automatically
and an Alert message appears on the home page. Click Install now to install the
update. Your device reboots automatically to use the new software. Any devices that
were previously connected will have to be reconnected.
●
If your device is connected to Sprint’s 3G network, an Alert message appears on you’re
the home page. Click Download now to download and install the software update. Your
device reboots automatically to use the new software. Any devices that were previously
connected will have to be reconnected.
You can also check for updates manually without having received an alert.
There are two ways to get the software update. You can get it from the Alert message, or from
the Software and Reset page.
To get the update from the Alert:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Software and Reset
94
4. In the Alert message for the available update, click Install Now.
5. Follow the onscreen instructions.
To get the update from the Software and Reset page:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Software and Reset.
5. Click Check for update. If an update is available, an Install Now button appears.
6. Click Install Now.
7. Click Continue.
Upgrade Firmware from a File
A one-click tool may be available for upgrading firmware from a file in enterprise environments.
Contact Sprint for details.
Reset Your Gateway
In some cases, you may want or need to clear your account information to use your gateway
with another account, reset most settings (except for your account and network activation), or
reset your device to its factory default settings.
You can clear these settings from your device’s Reset screen, or from the gateway’s Software
and Reset page.
Clear Account Details Only
If you want to use your device with another account, you need to clear your current account.
You can clear these settings from your gateway’s Reset page, or from the Software and Reset
page.
Note: All connected devices will be disconnected and your device will reboot automatically. You
will have to activate your device with your new account before they can reconnect.
To clear account details:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
Software and Reset
95
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Software and Reset.
5. Below Clear Programming, click Reset.
6. Click Begin Reset.
Reset Device Settings Only
If you want to reset your device to its default behavior, but don’t want to change your account or
network activation, you need to reset your device settings.
You can reset these settings from your gateway’s Reset page or from the Software and Reset
page.
Note: All connected devices will be disconnected and your device will reboot automatically.
After the reset finishes, they can reconnect.
To reset device settings:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Software and Reset.
5. Below Settings Reset, click Reset.
6. Click Begin Reset.
Reset the Gateway to Factory Default Settings
In some cases you will need to reset your device’s software to its factory default settings.
WARNING: If you reset the software to default settings, you must go through the device setup,
as if you’ve just purchased your device. (See Starting Your Device for the First Time.)
You’ll need to reset the software to default settings if:
●
You’ve forgotten the administrator password.
●
You’ve changed the DHCP settings such that your device is inoperable. (For example,
there’s no communication with your device.)
Software and Reset
96
You can reset your device to factory settings from the gateway’s Software and Reset page.
Note: All connected devices will be disconnected and your device will reboot automatically.
To reset the gateway to its factory settings:
Note: You can only do a factory reset of your device with Sprint’s assistance. Contact Sprint
Customer Service to obtain an SPC code that you will need to enter to perform the reset.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Software and Reset.
5. Below Factory Reset, click Reset.
6. Enter the SPC code provided by Sprint, then click Submit.
7. Click Begin Reset.
Software and Reset
97
Set Up a Virtual Private Network (VPN)
Learn about and set up virtual private network (VPN) client-to-gateway and site-to-site tunnels.
A VPN is a network that uses primarily public telecommunication infrastructure, such as the
Internet, to provide remote offices or traveling users an access to a central organizational
network. You need networking knowledge to implement these features.
VPN Overview
Learn about VPN client-to-gateway VPN tunnels and site-to-site VPN tunnels, which use IPSec
IKEv1 (PSK/XAuth).
●
Remote-client to gateway VPN. The gateway must be connected to the public network
either through DSL or a WAN uplink. Remote users on the Internet can create an IPSec
tunnel from their computers to the gateway using the WAN IP address of the gateway.
Once connected, the remote users can access the LAN-side resources of the gateway.
The gateway supports the following clients:
●

NETGEAR ProSAFE VPN Client VPNG01L/VPNG05L Professional Software
Version 5.14.003, available here:
http://kb.netgear.com/app/answers/detail/a_id/20316

IPSecuritas VPN client Version 3.4 for MAC OS platforms from Lobotomo Software,
available here: http://www.lobotomo.com/products/IPSecuritas/
Site-to-site VPN. You can establish an IPSec tunnel between two gateways. The LANside users from either gateway can access the other through the site-to-site tunnel.
When you are configuring the site-to-site tunnel, each gateway must have a unique IP
address range for its LAN side.
Set Up a Remote Client-to-Gateway VPN
To set up a remote client-to-gateway VPN, you must complete the following tasks:
1. Add the VPN users (the remote client users).
2. Specify the VPN connection information.
3. Enable the VPN.
4. Use VPN client software to configure the remote clients.
Add VPN Users
The VPN users are the remote users for client-to-gateway VPN tunnels.
Set up a Virtual Private Network (VPN)
98
To add VPN users:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > VPN.
5. In the VPN Users section, click the + (Add) button.
6. Enter the user name and password.
7. Click the Save button.
The new VPN user displays on the Manage VPN Connection screen.
Set up a Virtual Private Network (VPN)
99
To edit a VPN user:
1. Select the VPN user from the VPN Users list.
2. Click the Edit button.
3. Type the changes for the user name and password
4. Click the Save button.
The changes are saved.
To delete a VPN user:
1. Select the VPN user from the VPN Users list.
2. Click the Delete button.
The user is removed from the VPN user list.
Specify the Client-to-Gateway VPN Connection
Enter a pre-shared key to be used for the Phase 1 IKEv1 negotiation.
To specify the VPN connection:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Set up a Virtual Private Network (VPN)
100
4. Click Settings > General > VPN.
5. In the Remote Client to GW VPN Configuration section, click the Edit button next to the
Pre-Shared Key field.
6. Type the pre-shared key.
Note: The key is an alphanumeric string with a maximum length of 32 characters.
7. Verify that the VPN remote virtual IP and Mask fields have the correct values.
Note: By default, these fields show the IP address and subnet mask for this gateway.
This is how the remote clients will access this gateway.
8. Click the Save button.
To change the PSK for a remote client:
1. Click Settings > General > VPN.
Set up a Virtual Private Network (VPN)
101
2. In the Remote Client to GW VPN Configuration section, click the Edit button next to the
Pre-Shared Key field.
3. Enter the new value
4. Click the Save button.
The new pre-shared key is saved.
Enable the Client-to-Gateway VPN
Enabling the VPN activates the remote client-to-gateway VPN server feature on the gateway. If
you disable the VPN, your settings are retained.
To enable the VPN:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > VPN.
5. Select the VPN Status Enable radio button.
6. Click the Apply button.
The VPN connection is activated.
To disable the VPN:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > VPN.
5. Select the VPN Status Disable radio button.
6. Click the Apply button.
The VPN connection is disabled, but your VPN settings are retained.
Set up a Virtual Private Network (VPN)
102
Configure a Windows Computer as a Remote Client
This example describes how to use NETGEAR ProSAFE VPN client software to set up a VPN
client for the gateway.
To use NETGEAR ProSAFE to set up a VPN client:
Download the trial version of NETGEAR ProSAFE VPN client (VPNG01L/VPNG05L
Professional Software Version 5.14.003) and install it on the Windows computer.
1. This software is available here: http://kb.netgear.com/app/answers/detail/a_id/20316.
2. Launch the VPN client software.
3. In the left pane, select Global Parameters.
4. Specify the following settings:



Lifetime (sec):
•
Authentication (IKE): Enter 3600, 360, 28800.
•
Encryption (IPSec): Enter 3600, 300, 28800.
Dead Peer Detection (DPD):
•
Check interval: Enter 30.
•
Max. number of retries: Enter 5.
•
Delay between retries: Enter 15.
Miscellaneous:
•
Retransmissions: Enter 2.
•
X-Auth timeout: Enter 60.
5. In the left pane, select Gateway, and click the Authentication tab.
6. In the Authentication screen, specify these settings:


In the Addresses section, specify the following:
•
In the Remote Gateway field, enter the WAN IP address.
•
Select the Pre-Shared Key radio button and enter the same key that is
configured on the gateway.
In the IKE section, specify the following:
•
Encryption: Select 3DES.
Set up a Virtual Private Network (VPN)
103
•
Authentication: Select SHA-1.
•
Key Group: Select DH2 (1024).
7. Click the Advanced tab.
8. Specify these settings in the Advanced screen:

In the Advanced Features section, select the Mode Config check box and leave the
other settings as shown.

In the X-Auth section, specify how the client user enters credentials:

•
To enable a pop-up, select the X-Auth Popup check box.
With this setting, the client opens a pop-up window prompting the user to enter
the user name and password.
•
To avoid using a pop-up, clear the X-Auth Popup check box and type the user
name and password in the Login and Password fields.
Leave the Local ID field and Remote ID field blank.
9. Under the Gateway heading, select Tunnel, and click the IPSec tab.
10. Specify these settings on the IPSec screen:

In the Address type list, select Subnet Address.

In the Remote LAN address and Subnet mask fields, enter the gateway IP address
and subnet mask.
Note: The gateway and the client’s network must have different subnet ranges that
do not overlap.


In the ESP section, specify the following:
•
Encryption. Select 3DES.
•
Authentication. Select SHA-1.
•
Mode. Select Tunnel.
In the PFS section, specify the following:
•
Select the PFS check box.
•
In the Group list, select DH2(1024).
11. Leave the rest of the tabs with their default values.
12. Click the Apply button.
Set up a Virtual Private Network (VPN)
104
13. Click the Save button.
14. To initiate the VPN connection to the gateway, right-click the tunnel on the left pane and
select Open Tunnel.
When the connection is initiated, the icon on the Tunnel menu on the left pane turns green to
indicate that the tunnel is established.
The remote client device can access the LAN-side resources of the gateway including access to
the gateway web management interface.
Configure a Mac Computer as a Remote Client
This example uses the IP Securitas VPN client software.
To configure a Mac computer as a remote client:
1. Download the trial version of IP Securitas VPN client and install it on the Mac computer.
IPSecuritas VPN client Version 3.4 for MAC OS platforms from Lobotomo Software is
available here: http://www.lobotomo.com/products/IPSecuritas/
2. Launch the VPN client software.
3. Click Connections > Edit Connections.
Set up a Virtual Private Network (VPN)
105
4. In the Connections pane, click the + (plus) icon in the lower left corner.
5. Enter a connection name that is easy to understand.
6. Click the General tab.
7. Specify the following:

In the Remote IPSec Device field, enter the WAN IP address of the gateway.
Set up a Virtual Private Network (VPN)
106

In the Remote Side section, enter the LAN-side IP subnet of the gateway with the
subnet mask in CIDR format.
The gateway and the client’s network must have different subnet ranges that do not
overlap.
8. Click the Phase 1 tab.
9. Specify the following:

Lifetime: Enter 1800 and select Seconds.

DH Group: Select 1024 (2).

Encryption: Select 3DES.

Authentication: Select SHA-1.

Exchange Mode: Select Main.

Proposal Check: Select Obey.

Nonce Size: Enter 16.
10. Click the Phase 2 tab.
11. Specify the following:

Lifetime: Enter 1800 and select Seconds.

PFS Group: Select 1024 (2).

Encryption: Select the DES, 3DES, AES 2256, AES 192, and AES 128 check boxes.

Authentication: Select the HMAC MDS and HMAC SHA-1 check boxes.
12. Click the ID tab.
13. Specify the following:

Leave the Local Identifier and Remote Identifier fields set to Address.

Select XAuth PSK in the Authentication Method section and type the pre-shared
key, user name, and password that you specified in the gateway.
14. Click the Options tab.
15. Specify the following:
●
Select these check boxes:

IPSec DOI
Set up a Virtual Private Network (VPN)
107
●

SIT_IDENTITY_ONLY

Initial Contact

Enable MODE_CFG

Request Certificate

Send Certificate

Unique SAs

IKE Fragmentation
Leave NAT-T set to Disable and the Action after connection timeout set to Give up.
16. Close the Edit Connection window. The settings are saved.
17. In the main screen, highlight the connection name and select Start.
Once the connection is established, the icon to the right of the connection name turns green.
The client computer can access the LAN-side resources of the gateway including the web
management interface of the gateway.
Set Up a Site-to-Site VPN
This example describes how to set up a site-to-site VPN tunnel between two gateways at
different locations. The LAN subnets of these two gateways must each be in a unique range.
To do this, you must complete the following tasks:
1. Make sure that each gateway uses a different subnet range and that the ranges do not
overlap.
2. Specify the VPN connection for each gateway.
3. Enable the VPN on each gateway.
Specify the Site-to-Site VPN Connection
To specify the VPN connection information:
1. On the first gateway, select Settings > General > VPN.
2. In the Site-to-Site VPN configuration section, click the Edit button next to the Pre-Shared
Key (PSK) field.
3. Type a unique pre-shared key.
Note: The key is an alphanumeric string with a maximum length of 32 characters.
Set up a Virtual Private Network (VPN)
108
Note: This pre-shared key is unique to the site-to-site VPN configuration. If you set up a
client-to-gateway VPN tunnel with this gateway, you must use a different pre-shared key
for the site-to-site VPN.
4. In the Site-to-Site Configuration Details section, click the Add button.
5. In the Site Name field, type a meaningful name that is easy to understand.
6. In the WAN IP field, enter the remote gateway’s WAN IP address.
7. In the Remote Site IP address and Subnet field, enter these settings from the remote
gateway.
Note: Each gateway must have a unique non-overlapping IP address range.
8. Click the Save button.
9. For the second gateway, repeat Steps 1–8 of this procedure.
Enable the Site-to-Site VPN
Enabling the VPN activates the VPN server feature on the gateway.
To enable the VPN:
1. On the first gateway, select Settings > General > VPN.
2. Select the VPN Status Enable radio button.
3. Click the Apply button. The VPN connection is activated.
4. On the second gateway, select Settings > General > VPN.
5. Select the VPN Status Enable radio button.
6. Click the Apply button. The VPN connection is activated.
The IPSec VPN tunnel is established between the two gateways. The LAN-side resources from
one gateway can access the other through this tunnel.
To disable the VPN:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > VPN.
Set up a Virtual Private Network (VPN)
109
5. Select the VPN Status Disable radio button.
6. Click the Apply button.
The VPN connection is disabled, but your VPN settings are retained.
Set up a Virtual Private Network (VPN)
110
Frequently Asked Questions
Find out answers to questions you may have.
How Can I Tell I’m Connected to 3G or LTE?
When you log in to the gateway (http://myrouter), the network type icon (3G or LTE) appears in
the Status section on the left side of the page, and the connection status is shown on the
Network > Status Details Page.
How Do I Connect to Wi-Fi?
You may have to manually connect to Wi-Fi after certain events — for example, as part of the
initial device setup, or after a software update.
Tip: The Wi-Fi network name and password are displayed on the label of the gateway.
Tip: Alternatively, you can use WPS to connect a device to the gateway, if your device
supports WPS. (See Connecting Through WPS.)
To connect to Wi-Fi:
7. Do one of the following, depending on your operating system.

Windows 7: Right-click the Wi-Fi icon

Windows Vista: Click Control Panel > Network and Internet > Network and
Sharing Center > Connect to a network.

Windows XP: Click Control Panel > Network Connections > Wireless Network
Connections > View available wireless networks.

Mac: Click the AirPort icon

Linux: Please see the user documentation of the Linux distribution.

Other operating systems: Please see the user documentation for your operating
system or computer.
in the system tray.
(in the upper right corner of your screen).
8. Select one of the Wi-Fi networks provided by the gateway and connect to it. (If prompted
for a network key/security key/password, enter the Wi-Fi password.)
Is Roaming on LTE Supported?
At the time of this release, roaming (that is, using a network other than Sprint) on LTE is not
supported.
Frequently Asked Questions
111
To change the roaming setting, see Setting the Roaming Mode.
What Do I Do if I Forget the Main or Guest Wi-Fi
Password?
To see the Main Wi-Fi password and Guest Wi-Fi password:
1. Look on the gateway’s label.
2. If you changed the Wi-Fi password and have forgotten what it is, use an Ethernet cable
to connect a computer to one of the gateway’s yellow Ethernet LAN ports.
3. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
4. In the address or URL field of your browser, type http://myrouter.
5. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
6. Click Wi-Fi > Options.
What Do I Do if I Forget the Administrator (admin)
Password?
The default password is password. If you changed the password and enabled password
recovery, you can recover your password.
To recover a forgotten administrator (admin) password:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter
3. When you are prompted to login, click Cancel.
Note: If password recovery is enabled, you are prompted to answer two security
questions.
4. Enter the saved answers to the security questions.
5. Enter the serial number of your router.
Note: The serial number is on the gateway’s label.
Frequently Asked Questions
112
If you forgot the administrator password and you did not enable password, you will need to
contact Sprint Customer Support for assistance with resetting the software to default settings.
(See Resetting to Factory Default Settings.)
If the Connection is “Always On,” Am I Always Being
Billed?
No. The connection to the network goes dormant after a period of inactivity, but the connection
can be re-established faster than having to reconnect. Billing occurs only when data is passed
across the network.
Questions About GPS
Find answers to common questions about GPS.
What is GPS?
GPS stands for Global Positioning System, which is a system that uses a series of 24
geosynchronous satellites to provide location data.
GPS satellites transmit signals to equipment on the ground. GPS receivers passively receive
satellite signals, but do not transmit.
Where Can I Use GPS?
GPS works wherever you have line-of-sight access to the GPS satellites.
How Do I Enable or Disable GPS?
By default, GPS is disabled. To enable GPS, see Enabling / Disabling GPS.
What are some GPS Limitations?
Weather conditions or tall nearby buildings may affect your ability to get a clear view of the
satellites and thus to acquire a GPS fix.
How Can I Stream GPS Data to Use With a Third-party GPS
Application?
GPS NMEA data is streamed over Wi-Fi or over a tethered USB connection using a virtual COM
port.
To stream NMEA data for a third party GPS application:
1. Set GPS Mode to Continuous. (See Setting the GPS Mode.)
2. Determine the COM port number that your NETGEAR device (that is, your NETGEAR
6100D) is using.
In the following example for Windows, the Device Manager shows that COM 16 is used.
Frequently Asked Questions
113
In your case, the COM port number might be different.
Note: If you don't know how to access the Device Manager, see
http://kb.netgear.com/app/answers/detail/a_id/22868.)
3. Configure your GPS application to use the same COM port. For help, see the
documentation of the GPS application.
Questions About WPS
Find answers to common questions about WPS.
What is WPS?
Wi-Fi Protected Setup (WPS) provides a fast, simple, and secure way to connect WPS-enabled
devices to your Wi-Fi network. You don’t have to give the name (SSID) and Wi-Fi password of
your network to other users.
The WPS feature is available on certain cameras, printers, smartphones, and laptops. These
devices have either a hardware button or a WPS-related option in the software. Please consult
the user documentation of your device.
How do I Use WPS?
Please see Connecting Through WPS.
If a Wireless Device has a WPS Button or a WPS Software
Option, Must I Use it to Connect Via Wi-Fi?
If this is the only way your device provides to connect through Wi-Fi, then you must use the
WPS button or the WPS software option. Some laptops support two methods — a WPS button
or software option, and Wi-Fi network manager software where you can connect by entering the
Wi-Fi network name (SSID) and password, as described in How Do I Connect to Wi-Fi?.
Please consult the user documentation of your device.
How Do I Access My Corporate Network Through a
VPN?
Once you complete a wireless connection, you may need to launch an extranet client provided
by your company and supply the appropriate user name and password to gain access. For
support, contact your company help desk.
Frequently Asked Questions
114
Are Terminal Sessions Supported?
Terminal sessions (for example, via telnet or ssh) are not supported.
Frequently Asked Questions
115
Tips
This section provides information on getting the most out of your device and your network
connection.
Gateway Location
Follow these guidelines in placing your device.
●
Avoid moisture or extreme temperatures.
●
For improved reception, place your gateway near a closed window.
●
Place your device within easy reach of a reliable power supply and the computer to
which it will be connected.
Improving Signal Strength
There are several ways you can improve the signal strength.
●
Make sure you’re inside a network coverage area.
●
Try reorienting your device.
●
Move your device and your computer to another location — you may be in or near a
structure that is blocking the signal. Every obstacle (for example, walls, ceilings,
furniture) between the gateway and other wireless devices decreases the signal
strength.
●
Place your gateway in a centralized location, as high as possible in the room.
●
Make sure there’s plenty of space around your gateway to provide the best signal
reception.
●
Keep your gateway at least 3–6 feet away from electrical devices that generate RF
interference (for example, microwaves, TVs, 2.4 GHz cordless phones, cellular phones,
baby monitors, wireless speakers). If you’re not using these electrical devices, turn them
off.
●
If possible, place your gateway and your computers and devices so that the signal
passes through open doorways or drywall, as opposed to concrete, brick, metal, walls
with insulation, and so on.
●
If you cannot obtain service, contact Sprint — a network or account problem may be
preventing you from obtaining service.
Tips
116
Improving 3G Network Service
To improve your network service, periodically check for PRL and profile updates.
The PRL (Preferred Roaming List) is an account configuration item set by your service provider.
It controls the radio channels and network carrier used by the 3G modem.
To check for these updates:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Network > Preferences.
5. Click Update PRL.
Improving Wi-Fi Performance
There are several ways you can improve Wi-Fi performance.
●
Try a different channel number. (See Wi-Fi Channel.)
●
Check whether any device updates are available. (See Update Software and Firmware.)
●
See the tips in Improving Signal Strength.
Windows XP and Windows 7 Users
1. Open the Device Manager.
In Windows XP:
•
Click Start > Settings > Control Panel.
•
Double-click System.
•
Click Hardware.
•
Click Device Manager.
In Windows 7:
Tips
•
Click Start > Control Panel.
•
Click Device Manager.
117
2. Double-click Network adapters.
3. Double-click the Wi-Fi client network adapter of your computer — for example, “Intel(R)
WiFi Link 5100 AGN” in the screenshot below.
4. If the Wi-Fi client network adapter is by Intel, click Advanced and, in the Property list,
click Power Management and move the slider all the way to the right (to Highest). Click
OK.
— or —
If the Wi-Fi client network adapter is not by Intel, select a configuration with minimal
power savings (to maximize throughput).
Note: The above settings are often controlled by 3rd-party value-add applications and may be
automatically changed. If Wi-Fi performance improves for a while after performing the above
steps, but then declines, recheck the above settings.
Security Tips
Follow these tips to minimize security risks.
●
Change the Wi-Fi network name (SSID) and Wi-Fi password on a regular basis. (See
Change Wi-Fi Network Names and Passwords.)
●
Disable SSID Broadcast. (See Options Section.)
●
Use the highest level of Wi-Fi security that your devices support. (See Wi-Fi Security.)
●
Change the login password. (See Changing the Password.)
●
Use MAC filtering to specify computers that are or aren’t allowed to connect to the
network. (See Allowing or Denying Computers Access to the Network (MAC Filter).)
Finding the MAC Address
You’ll need to know the MAC address of a device in a couple of cases.
●
Tips
Allowing or denying computers access to the network. (See Allowing or Denying
Computers Access to the Network.)
118
Tip: You can display a list of connected devices, including the MAC address of each device.
See Displaying and Blocking Currently Connected Devices (Block List).
The steps to finding the MAC address of a device vary, depending on your operating system.
Windows
1. Open a command prompt window.

Click Start and Run.

Type cmd or command, and click OK.
2. At the command prompt, type ipconfig/all and press Enter.
3. Write down the Physical Address for the entry that relates to the wireless network
connection; it appears as a series of numbers and letters — this is the MAC address of
your wireless adapter.
Mac OS X
1. From the Apple menu, select System Preferences.
2. Select Network.
3. Select the adapter that is connecting to the routing hardware.
4. Select Advanced.
5. Select Ethernet. The Ethernet ID is listed. This is the same as the MAC address.
Linux
Please see the user documentation of the Linux distribution.
Other Operating Systems
Please see the user documentation for your operating system or computer.
Finding the IP Address
You’ll need to know the IP address of a device when configuring certain features.
●
Port forwarding
●
DMZ
The steps to finding the IP address of a device vary, depending on your operating system.
Tips
119
Windows
1. Open a command prompt window.
2. Type cmd or command, and click OK.
3. At the command prompt, type ipconfig and press Enter.
4. Write down the IP Address for the entry that relates to the wireless network connection.
(The IP address might be listed under “Ipv4 Address,” or something similar.)
Mac OS X
1. From the Apple menu, select System Preferences.
2. Select Network.
3. Select the wireless adapter. The IP address is displayed in the right pane.
Other Operating Systems
Please see the user documentation for your operating system or computer
Tips
120
Troubleshooting
Learn about various troubleshooting tips, and what to do when a specific message is displayed.
General Tips
Here are some general tips to get you started.
●
If some settings are preventing you from connecting to Wi-Fi, connect via Ethernet.
Cable your computer to an Ethernet LAN port on your device.
●
Go to sprint.com/support to access troubleshooting and other resources.
●
The knowledge base at the NETGEAR website (support.netgear.com) may also be
useful.
Insufficient Signal Strength
If you have insufficient signal strength, an icon is displayed on your device’s home screen, and
on the web page’s Connection Details section.
Insufficient signal strength, indicated by
, may occur because:
●
You are outside network coverage areas.
●
Your device’s internal antenna is pointing in the wrong direction.
●
You are in or near a structure that is blocking the signal.
●
You are near a device that is causing radio signal interference.
●
A network or account problem is preventing you from obtaining service.
See also Improving Signal Strength.
Cannot Connect to Wi-Fi
If your computer cannot connect to the Main or Guest Wi-Fi networks of the NETGEAR 6100D,
there are several things you should check.
Make sure that:
●
The maximum number of Wi-Fi devices has not been reached. (To determine the
number of connected Wi-Fi devices and set the maximum, see Displaying and Blocking
Currently Connected Devices (Block List) and Setting the Maximum Number of Wi-Fi
Devices.)
Troubleshooting
121
●
You’re connecting to the correct Wi-Fi network (SSID), and you’re using the correct
Wi-Fi password.
●
Nobody has changed the name or password of the Wi-Fi network.
●
Your computer supports the type of Wi-Fi security that the network is set to use.
Note: To connect to the gateway’s Wi-Fi network, each computer or Wi-Fi device must
support the gateway’s Wi-Fi security type.
●
Your computer supports Wi-Fi 802.11g (if Connection Rate is set, in the Wi-Fi Options
Section to 802.11g only).
●
Your computer has not been blocked through MAC filtering. (See Allowing or Denying
Computers Access to the Network (MAC Filter).)
Cannot Display the Home Page
Your Web browser may display an error message when you try to display the home page. The
error message depends on your Web browser.
●
“Could not connect to remote server” (Opera)
●
“Internet Explorer cannot display the webpage” (Internet Explorer)
●
“Oops! This link appears to be broken” (Google Chrome)
●
“Safari can’t open the page” (Safari)
●
“The connection has timed out” (FireFox)
Check the following:
●
Your gateway is turned on. (See Turning Your Device On and Off.)
●
You have established a connection to your device (through Wi-Fi or through an Ethernet
cable).
●
Make sure that you’re typing the correct address in the Web browser.
●

Try http://myrouter (unless you’ve changed the URL in Changing the URL.)

If the home page is still not displayed, try http://192.168.0.1 or, if you’re using
custom routing settings, replace “192.168.0.1” with the appropriate IP address.
The Web browser is a recent version, and Java-enabled. The following are
recommended:

Internet Explorer 10.0 or Higher

Firefox 21.0
Troubleshooting
122

Google Chrome (version 30 or higher)
●
If your computer has other adapters (for example, Ethernet) connected to other
networks, disable or remove them from your computer.
●
If Internet security software is running on your computer, disable it and see whether the
error message still occurs. Some firewall software may block access to the home page.
●
If DHCP is enabled on your device, make sure DHCP is enabled on your computer. (See
DHCP.)
●
Check your Web browser settings:
1. Open the Control Panel in Windows.
2. Double-click Internet Options.
3. From the Security tab, restore the default settings.
4. From the Connections tab, select Never dial a connection.
5. From the Advanced tab, restore the default settings.
6. Close and reopen your Web browser.
●
Disconnect your device from your computer (if you’re using the micro-USB cable).
Remove the battery from your device. Reinsert the battery.
If, after checking all of the above, you still cannot display the home page, consider resetting the
software to default settings. (See Resetting to Factory Default Settings.)
Cannot Connect to the Mobile Broadband Network
If this message is displayed, go through the following steps.
●
Make sure your computer is connected to your device (through Wi-Fi or with an Ethernet
cable). (See How Do I Connect to Wi-Fi? or Connecting with Ethernet.)
●
Make sure you’re in a network coverage area.
●
Check the Network Mode setting (See Setting the Allowed Network Mode). For
example, if it’s set to LTE Only, you won’t be able to connect if you don’t have LTE
coverage.
●
If you’re roaming on 3G, make sure that roaming is enabled. (See Setting the Roaming
Mode.) (Roaming is not supported on LTE.)
Note: Roaming charges may apply.
Troubleshooting
123
●
If you’re roaming internationally, make sure that Any Network is selected. (See Setting
the Roaming Mode.)
●
Try the tips in Improving Signal Strength.
●
Check with Sprint — a network or account problem may be preventing your device from
obtaining service.
GPS Doesn’t Seem to Be Available
Make sure that GPS is enabled. (See Enabling / Disabling GPS.)
For best results, minimize the number of obstructions between your device and the GPS
satellites.
Cannot Check for Updates
Make sure your device is connected to the AC charger or computer through the micro-USB
cable.
Troubleshooting
124
Technical Specifications
This section lists the electrical, radio frequency, and other parameters of your device for those
who require technical information.
Radio Frequency and Electrical Specifications
This section lists the radio frequency and electrical parameters of your device.
Item
Description
Approvals
FCC
Current
Maximum: ~900 mA
Standby current:
- 4 mA (1xEV-DO/IS2000 hybrid mode)
- ~6.5 mA (LTE)
Transmit
PCS: 1850-1910 MHz
Cellular: 824-849 MHz
Secondary 800 MHz: 817-824 MHz
LTE:
- Band 25: 1850-1915 MHz
- Band 26: 814-849 MHz
- Band 41 (TDD): 2496-2690 MHz
UMTS/HSPA+:
- Band 1: 1920-1980 MHz
- Band 2: 1850-1910 MHz
- Band 5: 824-849 MHz
- Band 8: 880-915 MHz
Receive
PCS: 1930-1990 MHz
Cellular: 869-894 MHz
Secondary 800 MHz: 862-869 MHz
LTE:
- Band 25: 1930-1995 MHz
- Band 26: 859-894 MHz
- Band 41 (TDD): 2496-2690 MHz
UMTS/HSPA+:
- Band 1: 2110-2170 MHz
- Band 2: 1930-1990 MHz
- Band 5: 869-894 MHz
- Band 8: 925-960 MHz
GPS: 1575.42 MHz
Technical Specifications
125
Software Specifications
This section lists the specifications that your device supports.
Item
Description
CDMA (3G) specification
IS-2000 Release 0
Data service
IS-707A
3GPP
Release 9
Wi-Fi specification
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n
Wi-Fi security and
encryption protocols
WEP Open & Shared
WEP-64
WEP-128
WPA-Personal TKIP & AES (Pre-Shared Key or WPA-PSK)
WPA2-Personal TKIP & AES (WPA2-PSK)
WPA+WPA2-Personal (WPA+WPA2 PSK)
WPS
Wi-Fi Simple Configuration 2.0 (WSC 2.0) based Wi-Fi
Protected Setup (WPS)
SMS (IS-637)
Not supported
FAX
Not supported
IOTA
Supported
OTASP (IS-683A, IS-683B,
IS-683C)
Supported
OTAPA
Supported
PRL (Preferred Roaming
List)
Supported
Authentication
Supported
Voice
Not supported
NAM
Single
Position Location
Standalone
TTY/Accessibility
Not supported
Mobile IP
Supported
Network protocols
(routing hardware)
TCP, UDP, ARP, RARP, ICMP
VPN
Pass-through of the following VPN types:
PPTP
IPSec
Tunneling of multiple VPN sessions simultaneously is
supported.
Technical Specifications
126
Environmental Specifications
This section describes the environmental conditions that your gateway can be used in.
Item
Description
Operating temperature
32 to 140°F
Storage temperature
14 to +140°F
Humidity
149°F, 90% relative humidity for 24 hours
Mechanical Specifications
This section describes the dimensions and physical features of your device.
Item
Description
Dimensions (W x L x H)
2.72" x 4.33" x 0.61"
Weight
3.70 oz.
Headset jack
Not supported
LED
Blue / Amber / Orange
Wall Mounting
You can wall-mount your gateway.
To wall-mount the gateway:
1. Drill holes in the wall where you will wall-mount the gateway.
Technical Specifications
127
2. Install wall anchors in the holes.
Note: Use pan head Phillips wood screws, 3.5 x 20 mm (diameter x length, European) or #6
type screw, 1 inch long (U.S.).
3. Insert screws into the wall anchors, leaving 3/16 in. (0.5 cm) of each screw exposed.
Technical Specifications
128
Safety Information
Read important safety information about your device.
Important Notice
Due to the nature of wireless communications, transmission and reception of data can never be
guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although
significant delays or losses of data are rare when wireless devices such as the NETGEAR
6100D are used in a normal manner with a well-constructed network, your device should not be
used in situations where failure to transmit or receive data could result in damage of any kind to
the user or any other party, including but not limited to personal injury, death, or loss of property.
NETGEAR accepts no responsibility for damages of any kind resulting from delays or errors in
data transmitted or received using your device, or for failure of your device to transmit or receive
such data.
Safety and Hazards
Do not operate your device under the following conditions.
●
In areas where blasting is in progress
●
Where explosive atmospheres may be present
●
Near medical equipment
●
Near life support equipment, or any equipment that may be susceptible to any form of
radio interference.
In such areas, your device MUST BE POWERED OFF. Your device can transmit signals that
could interfere with this equipment.
Do not operate your device in any aircraft, whether the aircraft is on the ground or in flight. In
aircraft, your device MUST BE POWERED OFF. When operating, your device can transmit
signals that could interfere with various onboard systems.
Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground
and the door is open. Your device may be used at this time.
The driver or operator of any vehicle should not operate the device while in control of a vehicle.
Doing so will detract from the driver or operator’s control and operation of that vehicle. In some
jurisdictions, operating such communications devices while in control of a vehicle is an offense.
Safety Information
129
Regulatory Notices
This section contains regulatory information for your device.
The design of the NETGEAR 6100D complies with U.S. Federal Communications Commission
(FCC) guidelines respecting safety levels of radio frequency (RF) exposure for mobile devices,
which in turn are consistent with the following safety standards previously set by U.S. and
international standards bodies:
●
ANSI / IEEE C95.1-1999, IEEE Standard for Safety Levels with Respect to Human
Exposure to Radio Frequency Electromagnetic Fields, 3kHz to 300 GHz
●
National Council on Radiation Protection and Measurements (NCRP) Report 86, 1986,
Biological Effects and Exposure Criteria for Radio Frequency Electromagnetic
Fields
●
International Commission on Non-Ionising Radiation Protection (ICNIRP) 1998,
Guidelines for limiting exposure to time-varying electric, magnetic, and
electromagnetic fields (up to 300 GHz)
FCC ID: PY313200235
Radiation Exposure Statement - This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Country Code selection feature to be disabled for products marketed to the US/CANADA
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
WARNING (EMI) - United States FCC Information - This equipment has been tested and
found to comply with the limits for a Class B computing device peripheral, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Regulatory Notices
130
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by NETGEAR could void the
user’s authority to operate the equipment.
This device complies with Parts 15, 24, and 27 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Regulatory Notices
131
Legal
This section contains important license and legal information.
Patents
This product contains technology developed by or for NETGEAR, Inc.
This product includes technology licensed from QUALCOMM®.
Licenses
A large amount of the source code to this product is available under various free and open
source licenses. Most is available under one or more versions of the GNU General Public
License and/or GNU Limited General Public License.
The remainder of the open source software which is not under the GPL is available under one of
a variety of more permissive licenses. Those that require reproduction of the license text in the
distribution are listed in the sections that follow (starting with fontconfig License).
GNU General Public License (Version 2)
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA
02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but
changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it.
By contrast, the GNU General Public License is intended to guarantee your freedom to share
and change free software--to make sure the software is free for all its users. This General Public
License applies to most of the Free Software Foundation's software and to any other program
whose authors commit to using it. (Some other Free Software Foundation software is covered
by the GNU Library General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public
Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish), that you receive source code or can get it if
you want it, that you can change the software or use pieces of it in new free programs; and that
you know you can do these things.
Legal
132
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights
or to ask you to surrender the rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must
give the recipients all the rights that you have. You must make sure that they, too, receive or
can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license
which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands
that there is no warranty for this free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is not the original, so that any
problems introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the
danger that redistributors of a free program will individually obtain patent licenses, in effect
making the program proprietary. To prevent this, we have made it clear that any patent must be
licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General Public License.
The “Program”, below, refers to any such program or work, and a “work based on the Program”
means either the Program or any derivative work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim or with modifications and/or translated
into another language. (Hereinafter, translation is included without limitation in the term
“modification”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License; they
are outside its scope. The act of running the Program is not restricted, and the output from the
Program is covered only if its contents constitute a work based on the Program (independent of
having been made by running the Program). Whether that is true depends on what the Program
does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it,
in any medium, provided that you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to
this License and to the absence of any warranty; and give any other recipients of the Program a
copy of this License along with the Program.
Legal
133
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work
based on the Program, and copy and distribute such modifications or work under the terms of
Section 1 above, provided that you also meet all of these conditions: a) You must cause the
modified files to carry prominent notices stating that you changed the files and the date of any
change. b) You must cause any work that you distribute or publish, that in whole or in part
contains or is derived from the Program or any part thereof, to be licensed as a whole at no
charge to all third parties under the terms of this License. c) If the modified program normally
reads commands interactively when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you
provide a warranty) and that users may redistribute the program under these conditions, and
telling the user how to view a copy of this License. (Exception: if the Program itself is interactive
but does not normally print such an announcement, your work based on the Program is not
required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work
are not derived from the Program, and can be reasonably considered independent and separate
works in themselves, then this License, and its terms, do not apply to those sections when you
distribute them as separate works. But when you distribute the same sections as part of a whole
which is a work based on the Program, the distribution of the whole must be on the terms of this
License, whose permissions for other licensees extend to the entire whole, and thus to each
and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or
with a work based on the Program) on a volume of a storage or distribution medium does not
bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object
code or executable form under the terms of Sections 1 and 2 above provided that you also do
one of the following: a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or, b) Accompany it with a written offer, valid for at
least three years, to give any third party, for a charge no more than your cost of physically
performing source distribution, a complete machine-readable copy of the corresponding source
code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily
used for software interchange; or, c) Accompany it with the information you received as to the
offer to distribute corresponding source code. (This alternative is allowed only for
noncommercial distribution and only if you received the program in object code or executable
form with such an offer, in accord with Subsection b above.)
Legal
134
The source code for a work means the preferred form of the work for making modifications to it.
For an executable work, complete source code means all the source code for all modules it
contains, plus any associated interface definition files, plus the scripts used to control
compilation and installation of the executable. However, as a special exception, the source code
distributed need not include anything that is normally distributed (in either source or binary form)
with the major components (compiler, kernel, and so on) of the operating system on which the
executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated
place, then offering equivalent access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not compelled to copy the source
along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly
provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the
Program is void, and will automatically terminate your rights under this License. However,
parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Program or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Program (or any work based on the Program), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not impose any further restrictions on
the recipients' exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other
reason (not limited to patent issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse you
from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent license would not permit royaltyfree redistribution of the Program by all those who receive copies directly or indirectly through
you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance,
the balance of the section is intended to apply and the section as a whole is intended to apply in
other circumstances.
Legal
135
It is not the purpose of this section to induce you to infringe any patents or other property right
claims or to contest validity of any such claims; this section has the sole purpose of protecting
the integrity of the free software distribution system, which is implemented by public license
practices. Many people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and
a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the
rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents
or by copyrighted interfaces, the original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General
Public License from time to time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version
number of this License which applies to it and “any later version”, you have the option of
following the terms and conditions either of that version or of any later version published by the
Free Software Foundation. If the Program does not specify a version number of this License,
you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will be guided by the two goals of preserving
the free status of all derivatives of our free software and of promoting the sharing and reuse of
software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS
WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
Legal
136
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER
OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public,
the best way to achieve this is to make it free software which everyone can redistribute and
change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of
each source file to most effectively convey the exclusion of warranty; and each file should have
at least the "copyright" line and a pointer to where the full notice is found.

Copyright (C)  
This program is free software; you can redistribute it and/or modify it under the terms of the
GNU General Public License as published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if
not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive
mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type 'show w'.
This is free software, and you are welcome to redistribute it under certain conditions; type 'show
c' for details.
Legal
137
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the
General Public License. Of course, the commands you use may be called something other than
‘show w’ and ‘show c’; they could even be mouse-clicks or menu items--whatever suits your
program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign
a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’ (which
makes passes at compilers) written by James Hacker.
, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary
programs. If your program is a subroutine library, you may consider it more useful to permit
linking proprietary applications with the library. If this is what you want to do, use the GNU
Library General Public License instead of this License.
GNU General Public License (Version 3)
Version 3, 29 June 2007
Copyright © 2007 Free Software Foundation, Inc. 
Everyone is permitted to copy and distribute verbatim copies of this license document, but
changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for software and other kinds of
works.
The licenses for most software and other practical works are designed to take away your
freedom to share and change the works. By contrast, the GNU General Public License is
intended to guarantee your freedom to share and change all versions of a program--to make
sure it remains free software for all its users. We, the Free Software Foundation, use the GNU
General Public License for most of our software; it applies also to any other work released this
way by its authors. You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public
Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for them if you wish), that you receive source code or can get it if you want
it, that you can change the software or use pieces of it in new free programs, and that you know
you can do these things.
Legal
138
To protect your rights, we need to prevent others from denying you these rights or asking you to
surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the
software, or if you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must
pass on to the recipients the same freedoms that you received. You must make sure that they,
too, receive or can get the source code. And you must show them these terms so they know
their rights.
Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the
software, and (2) offer you this License giving you legal permission to copy, distribute and/or
modify it.
For the developers' and authors' protection, the GPL clearly explains that there is no warranty
for this free software. For both users' and authors' sake, the GPL requires that modified versions
be marked as changed, so that their problems will not be attributed erroneously to authors of
previous versions.
Some devices are designed to deny users access to install or run modified versions of the
software inside them, although the manufacturer can do so. This is fundamentally incompatible
with the aim of protecting users' freedom to change the software. The systematic pattern of such
abuse occurs in the area of products for individuals to use, which is precisely where it is most
unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for
those products. If such problems arise substantially in other domains, we stand ready to extend
this provision to those domains in future versions of the GPL, as needed to protect the freedom
of users.
Finally, every program is threatened constantly by software patents. States should not allow
patents to restrict development and use of software on general-purpose computers, but in those
that do, we wish to avoid the special danger that patents applied to a free program could make it
effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render
the program non-free.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS
0. Definitions
“This License” refers to version 3 of the GNU General Public License.
“Copyright” also means copyright-like laws that apply to other kinds of works, such as
semiconductor masks.
“The Program” refers to any copyrightable work licensed under this License. Each licensee is
addressed as “you”. “Licensees” and “recipients” may be individuals or organizations.
Legal
139
To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring
copyright permission, other than the making of an exact copy. The resulting work is called a
“modified version” of the earlier work or a work “based on” the earlier work.
A “covered work” means either the unmodified Program or a work based on the Program.
To “propagate” a work means to do anything with it that, without permission, would make you
directly or secondarily liable for infringement under applicable copyright law, except executing it
on a computer or modifying a private copy. Propagation includes copying, distribution (with or
without modification), making available to the public, and in some countries other activities as
well.
To “convey” a work means any kind of propagation that enables other parties to make or receive
copies. Mere interaction with a user through a computer network, with no transfer of a copy, is
not conveying.
An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a
convenient and prominently visible feature that (1) displays an appropriate copyright notice, and
(2) tells the user that there is no warranty for the work (except to the extent that warranties are
provided), that licensees may convey the work under this License, and how to view a copy of
this License. If the interface presents a list of user commands or options, such as a menu, a
prominent item in the list meets this criterion.
1. Source Code.
The “source code” for a work means the preferred form of the work for making modifications to
it. “Object code” means any non-source form of a work.
A “Standard Interface” means an interface that either is an official standard defined by a
recognized standards body, or, in the case of interfaces specified for a particular programming
language, one that is widely used among developers working in that language.
The “System Libraries” of an executable work include anything, other than the work as a whole,
that (a) is included in the normal form of packaging a Major Component, but which is not part of
that Major Component, and (b) serves only to enable use of the work with that Major
Component, or to implement a Standard Interface for which an implementation is available to
the public in source code form. A “Major Component”, in this context, means a major essential
component (kernel, window system, and so on) of the specific operating system (if any) on
which the executable work runs, or a compiler used to produce the work, or an object code
interpreter used to run it.
The “Corresponding Source” for a work in object code form means all the source code needed
to generate, install, and (for an executable work) run the object code and to modify the work,
including scripts to control those activities. However, it does not include the work's System
Libraries, or general-purpose tools or generally available free programs which are used
unmodified in performing those activities but which are not part of the work. For example,
Corresponding Source includes interface definition files associated with source files for the
Legal
140
work, and the source code for shared libraries and dynamically linked subprograms that the
work is specifically designed to require, such as by intimate data communication or control flow
between those subprograms and other parts of the work.
The Corresponding Source need not include anything that users can regenerate automatically
from other parts of the Corresponding Source.
The Corresponding Source for a work in source code form is that same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of copyright on the Program, and
are irrevocable provided the stated conditions are met. This License explicitly affirms your
unlimited permission to run the unmodified Program. The output from running a covered work is
covered by this License only if the output, given its content, constitutes a covered work. This
License acknowledges your rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not convey, without conditions so
long as your license otherwise remains in force. You may convey covered works to others for
the sole purpose of having them make modifications exclusively for you, or provide you with
facilities for running those works, provided that you comply with the terms of this License in
conveying all material for which you do not control copyright. Those thus making or running the
covered works for you must do so exclusively on your behalf, under your direction and control,
on terms that prohibit them from making any copies of your copyrighted material outside their
relationship with you.
Conveying under any other circumstances is permitted solely under the conditions stated below.
Sublicensing is not allowed; section 10 makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological measure under any
applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20
December 1996, or similar laws prohibiting or restricting circumvention of such measures.
When you convey a covered work, you waive any legal power to forbid circumvention of
technological measures to the extent such circumvention is effected by exercising rights under
this License with respect to the covered work, and you disclaim any intention to limit operation
or modification of the work as a means of enforcing, against the work's users, your or third
parties' legal rights to forbid circumvention of technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an
appropriate copyright notice; keep intact all notices stating that this License and any nonpermissive terms added in accord with section 7 apply to the code; keep intact all notices of the
absence of any warranty; and give all recipients a copy of this License along with the Program.
Legal
141
You may charge any price or no price for each copy that you convey, and you may offer support
or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to produce it from the
Program, in the form of source code under the terms of section 4, provided that you also meet
all of these conditions:
a) The work must carry prominent notices stating that you modified it, and giving a relevant
date.
b) The work must carry prominent notices stating that it is released under this License and any
conditions added under section 7. This requirement modifies the requirement in section 4 to
“keep intact all notices”.
c) You must license the entire work, as a whole, under this License to anyone who comes into
possession of a copy. This License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts, regardless of how they are
packaged. This License gives no permission to license the work in any other way, but it does
not invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display Appropriate Legal Notices;
however, if the Program has interactive interfaces that do not display Appropriate Legal Notices,
your work need not make them do so.
A compilation of a covered work with other separate and independent works, which are not by
their nature extensions of the covered work, and which are not combined with it such as to form
a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate”
if the compilation and its resulting copyright are not used to limit the access or legal rights of the
compilation's users beyond what the individual works permit. Inclusion of a covered work in an
aggregate does not cause this License to apply to the other parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms of sections 4 and 5,
provided that you also convey the machine-readable Corresponding Source under the terms of
this License, in one of these ways:
a) Convey the object code in, or embodied in, a physical product (including a physical
distribution medium), accompanied by the Corresponding Source fixed on a durable physical
medium customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product (including a physical
distribution medium), accompanied by a written offer, valid for at least three years and valid for
as long as you offer spare parts or customer support for that product model, to give anyone who
possesses the object code either (1) a copy of the Corresponding Source for all the software in
the product that is covered by this License, on a durable physical medium customarily used for
Legal
142
software interchange, for a price no more than your reasonable cost of physically performing
this conveying of source, or (2) access to copy the Corresponding Source from a network server
at no charge.
c) Convey individual copies of the object code with a copy of the written offer to provide the
Corresponding Source. This alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord with subsection 6b.
d) Convey the object code by offering access from a designated place (gratis or for a charge),
and offer equivalent access to the Corresponding Source in the same way through the same
place at no further charge. You need not require recipients to copy the Corresponding Source
along with the object code. If the place to copy the object code is a network server, the
Corresponding Source may be on a different server (operated by you or a third party) that
supports equivalent copying facilities, provided you maintain clear directions next to the object
code saying where to find the Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is available for as long as needed
to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided you inform other peers
where the object code and Corresponding Source of the work are being offered to the general
public at no charge under subsection 6d.
A separable portion of the object code, whose source code is excluded from the Corresponding
Source as a System Library, need not be included in conveying the object code work.
A “User Product” is either (1) a “consumer product”, which means any tangible personal
property which is normally used for personal, family, or household purposes, or (2) anything
designed or sold for incorporation into a dwelling. In determining whether a product is a
consumer product, doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, “normally used” refers to a typical or common use of that
class of product, regardless of the status of the particular user or of the way in which the
particular user actually uses, or expects or is expected to use, the product. A product is a
consumer product regardless of whether the product has substantial commercial, industrial or
non-consumer uses, unless such uses represent the only significant mode of use of the product.
“Installation Information” for a User Product means any methods, procedures, authorization
keys, or other information required to install and execute modified versions of a covered work in
that User Product from a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object code is in no case
prevented or interfered with solely because modification has been made.
If you convey an object code work under this section in, or with, or specifically for use in, a User
Product, and the conveying occurs as part of a transaction in which the right of possession and
use of the User Product is transferred to the recipient in perpetuity or for a fixed term
(regardless of how the transaction is characterized), the Corresponding Source conveyed under
this section must be accompanied by the Installation Information. But this requirement does not
Legal
143
apply if neither you nor any third party retains the ability to install modified object code on the
User Product (for example, the work has been installed in ROM).
The requirement to provide Installation Information does not include a requirement to continue
to provide support service, warranty, or updates for a work that has been modified or installed
by the recipient, or for the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and adversely affects the
operation of the network or violates the rules and protocols for communication across the
network.
Corresponding Source conveyed, and Installation Information provided, in accord with this
section must be in a format that is publicly documented (and with an implementation available to
the public in source code form), and must require no special password or key for unpacking,
reading or copying.
7. Additional Terms.
“Additional permissions” are terms that supplement the terms of this License by making
exceptions from one or more of its conditions. Additional permissions that are applicable to the
entire Program shall be treated as though they were included in this License, to the extent that
they are valid under applicable law. If additional permissions apply only to part of the Program,
that part may be used separately under those permissions, but the entire Program remains
governed by this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option remove any additional
permissions from that copy, or from any part of it. (Additional permissions may be written to
require their own removal in certain cases when you modify the work.) You may place additional
permissions on material, added by you to a covered work, for which you have or can give
appropriate copyright permission.
Notwithstanding any other provision of this License, for material you add to a covered work, you
may (if authorized by the copyright holders of that material) supplement the terms of this
License with terms:
a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this
License; or
b) Requiring preservation of specified reasonable legal notices or author attributions in that
material or in the Appropriate Legal Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions
of such material be marked in reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or authors of the material; or
e) Declining to grant rights under trademark law for use of some trade names, trademarks, or
service marks; or
Legal
144
f) Requiring indemnification of licensors and authors of that material by anyone who conveys the
material (or modified versions of it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on those licensors and authors.
All other non-permissive additional terms are considered “further restrictions” within the meaning
of section 10. If the Program as you received it, or any part of it, contains a notice stating that it
is governed by this License along with a term that is a further restriction, you may remove that
term. If a license document contains a further restriction but permits relicensing or conveying
under this License, you may add to a covered work material governed by the terms of that
license document, provided that the further restriction does not survive such relicensing or
conveying.
If you add terms to a covered work in accord with this section, you must place, in the relevant
source files, a statement of the additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the form of a separately
written license, or stated as exceptions; the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly provided under this
License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate
your rights under this License (including any patent licenses granted under the third paragraph
of section 11).
However, if you cease all violation of this License, then your license from a particular copyright
holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally
terminates your license, and (b) permanently, if the copyright holder fails to notify you of the
violation by some reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is reinstated permanently if the
copyright holder notifies you of the violation by some reasonable means, this is the first time you
have received notice of violation of this License (for any work) from that copyright holder, and
you cure the violation prior to 30 days after your receipt of the notice.
Termination of your rights under this section does not terminate the licenses of parties who have
received copies or rights from you under this License. If your rights have been terminated and
not permanently reinstated, you do not qualify to receive new licenses for the same material
under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or run a copy of the Program.
Ancillary propagation of a covered work occurring solely as a consequence of using peer-topeer transmission to receive a copy likewise does not require acceptance. However, nothing
other than this License grants you permission to propagate or modify any covered work. These
Legal
145
actions infringe copyright if you do not accept this License. Therefore, by modifying or
propagating a covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically receives a license from the
original licensors, to run, modify and propagate that work, subject to this License. You are not
responsible for enforcing compliance by third parties with this License.
An “entity transaction” is a transaction transferring control of an organization, or substantially all
assets of one, or subdividing an organization, or merging organizations. If propagation of a
covered work results from an entity transaction, each party to that transaction who receives a
copy of the work also receives whatever licenses to the work the party's predecessor in interest
had or could give under the previous paragraph, plus a right to possession of the Corresponding
Source of the work from the predecessor in interest, if the predecessor has it or can get it with
reasonable efforts.
You may not impose any further restrictions on the exercise of the rights granted or affirmed
under this License. For example, you may not impose a license fee, royalty, or other charge for
exercise of rights granted under this License, and you may not initiate litigation (including a
cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making,
using, selling, offering for sale, or importing the Program or any portion of it.
11. Patents.
A “contributor” is a copyright holder who authorizes use under this License of the Program or a
work on which the Program is based. The work thus licensed is called the contributor's
“contributor version”.
A contributor's “essential patent claims” are all patent claims owned or controlled by the
contributor, whether already acquired or hereafter acquired, that would be infringed by some
manner, permitted by this License, of making, using, or selling its contributor version, but do not
include claims that would be infringed only as a consequence of further modification of the
contributor version. For purposes of this definition, “control” includes the right to grant patent
sublicenses in a manner consistent with the requirements of this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the
contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run,
modify and propagate the contents of its contributor version.
In the following three paragraphs, a “patent license” is any express agreement or commitment,
however denominated, not to enforce a patent (such as an express permission to practice a
patent or covenant not to sue for patent infringement). To “grant” such a patent license to a
party means to make such an agreement or commitment not to enforce a patent against the
party.
Legal
146
If you convey a covered work, knowingly relying on a patent license, and the Corresponding
Source of the work is not available for anyone to copy, free of charge and under the terms of
this License, through a publicly available network server or other readily accessible means, then
you must either (1) cause the Corresponding Source to be so available, or (2) arrange to
deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a
manner consistent with the requirements of this License, to extend the patent license to
downstream recipients. “Knowingly relying” means you have actual knowledge that, but for the
patent license, your conveying the covered work in a country, or your recipient's use of the
covered work in a country, would infringe one or more identifiable patents in that country that
you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or arrangement, you convey, or
propagate by procuring conveyance of, a covered work, and grant a patent license to some of
the parties receiving the covered work authorizing them to use, propagate, modify or convey a
specific copy of the covered work, then the patent license you grant is automatically extended to
all recipients of the covered work and works based on it.
A patent license is “discriminatory” if it does not include within the scope of its coverage,
prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that
are specifically granted under this License. You may not convey a covered work if you are a
party to an arrangement with a third party that is in the business of distributing software, under
which you make payment to the third party based on the extent of your activity of conveying the
work, and under which the third party grants, to any of the parties who would receive the
covered work from you, a discriminatory patent license (a) in connection with copies of the
covered work conveyed by you (or copies made from those copies), or (b) primarily for and in
connection with specific products or compilations that contain the covered work, unless you
entered into that arrangement, or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting any implied license or other
defenses to infringement that may otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or otherwise) that
contradict the conditions of this License, they do not excuse you from the conditions of this
License. If you cannot convey a covered work so as to satisfy simultaneously your obligations
under this License and any other pertinent obligations, then as a consequence you may not
convey it at all. For example, if you agree to terms that obligate you to collect a royalty for
further conveying from those to whom you convey the Program, the only way you could satisfy
both those terms and this License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have permission to link or combine any
covered work with a work licensed under version 3 of the GNU Affero General Public License
into a single combined work, and to convey the resulting work. The terms of this License will
Legal
147
continue to apply to the part which is the covered work, but the special requirements of the GNU
Affero General Public License, section 13, concerning interaction through a network will apply to
the combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of the GNU General
Public License from time to time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies that a certain
numbered version of the GNU General Public License “or any later version” applies to it, you
have the option of following the terms and conditions either of that numbered version or of any
later version published by the Free Software Foundation. If the Program does not specify a
version number of the GNU General Public License, you may choose any version ever
published by the Free Software Foundation.
If the Program specifies that a proxy can decide which future versions of the GNU General
Public License can be used, that proxy's public statement of acceptance of a version
permanently authorizes you to choose that version for the Program.
Later license versions may give you additional or different permissions. However, no additional
obligations are imposed on any author or copyright holder as a result of your choosing to follow
a later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE
OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR
CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT
LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Legal
148
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided above cannot be given local legal
effect according to their terms, reviewing courts shall apply local law that most closely
approximates an absolute waiver of all civil liability in connection with the Program, unless a
warranty or assumption of liability accompanies a copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public,
the best way to achieve this is to make it free software which everyone can redistribute and
change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of
each source file to most effectively state the exclusion of warranty; and each file should have at
least the “copyright” line and a pointer to where the full notice is found.

Copyright (C)  
This program is free software: you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation, either
version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
details.
You should have received a copy of the GNU General Public License along with this
program. If not, see .
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short notice like this when it starts in
an interactive mode:
 Copyright (C)  
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it under certain conditions;
type `show c' for details.
Legal
149
The hypothetical commands `show w' and `show c' should show the appropriate parts of the
General Public License. Of course, your program's commands might be different; for a GUI
interface, you would use an “about box”.
You should also get your employer (if you work as a programmer) or school, if any, to sign a
“copyright disclaimer” for the program, if necessary. For more information on this, and how to
apply and follow the GNU GPL, see .
The GNU General Public License does not permit incorporating your program into proprietary
programs. If your program is a subroutine library, you may consider it more useful to permit
linking proprietary applications with the library. If this is what you want to do, use the GNU
Lesser General Public License instead of this License. But first, please read
.
GNU Lesser General Public License (Version 2.1)
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copiesof this license document, but
changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU
Library Public License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it.
By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share
and change free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software
packages--typically libraries--of the Free Software Foundation and other authors who decide to
use it. You can use it too, but we suggest you first think carefully about whether this license or
the ordinary General Public License is the better strategy to use in any particular case, based
on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute copies of
free software (and charge for this service if you wish); that you receive source code or can get it
if you want it; that you can change the software and use pieces of it in new free programs; and
that you are informed that you can do these things.
Legal
150
To protect your rights, we need to make restrictions that forbid distributors to deny you these
rights or to ask you to surrender these rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the
recipients all the rights that we gave you. You must make sure that they, too, receive or can get
the source code. If you link other code with the library, you must provide complete object files to
the recipients, so that they can relink them with the library after making changes to the library
and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you
this license, which gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free
library. Also, if the library is modified by someone else and passed on, the recipients should
know that what they have is not the original version, so that the original author's reputation will
not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish
to make sure that a company cannot effectively restrict the users of a free program by obtaining
a restrictive license from a patent holder. Therefore, we insist that any patent license obtained
for a version of the library must be consistent with the full freedom of use specified in this
license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public
License. This license, the GNU Lesser General Public License, applies to certain designated
libraries, and is quite different from the ordinary General Public License. We use this license for
certain libraries in order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the
combination of the two is legally speaking a combined work, a derivative of the original library.
The ordinary General Public License therefore permits such linking only if the entire combination
fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking
other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the
user's freedom than the ordinary General Public License. It also provides other free software
developers Less of an advantage over competing non-free programs. These disadvantages are
the reason we use the ordinary General Public License for many libraries. However, the Lesser
license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible
use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free
programs must be allowed to use the library. A more frequent case is that a free library does the
same job as widely used non-free libraries. In this case, there is little to gain by limiting the free
library to free software only, so we use the Lesser General Public License.
Legal
151
In other cases, permission to use a particular library in non-free programs enables a greater
number of people to use a large body of free software. For example, permission to use the GNU
C Library in non-free programs enables many more people to use the whole GNU operating
system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does
ensure that the user of a program that is linked with the Library has the freedom and the
wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close
attention to the difference between a "work based on the library" and a "work that uses the
library". The former contains code derived from the library, whereas the latter must be combined
with the library in order to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a
notice placed by the copyright holder or other authorized party saying it may be distributed
under the terms of this Lesser General Public License (also called "this License"). Each licensee
is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be
conveniently linked with application programs (which use some of those functions and data) to
form executables.
The "Library", below, refers to any such software library or work which has been distributed
under these terms. A "work based on the Library" means either the Library or any derivative
work under copyright law: that is to say, a work containing the Library or a portion of it, either
verbatim or with modifications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it.
For a library, complete source code means all the source code for all modules it contains, plus
any associated interface definition files, plus the scripts used to control compilation and
installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they
are outside its scope. The act of running a program using the Library is not restricted, and
output from such a program is covered only if its contents constitute a work based on the Library
(independent of the use of the Library in a tool for writing it). Whether that is true depends on
what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you
receive it, in any medium, provided that you conspicuously and appropriately publish on each
copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that
refer to this License and to the absence of any warranty; and distribute a copy of this License
along with the Library.
Legal
152
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work
based on the Library, and copy and distribute such modifications or work under the terms of
Section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed
the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties
under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied
by an application program that uses the facility, other than as an argument passed when the
facility is invoked, then you must make a good faith effort to ensure that, in the event an
application does not supply such function or table, the facility still operates, and performs
whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely welldefined independent of the application. Therefore, Subsection 2d requires that any applicationsupplied function or table used by this function must be optional: if the application does not
supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work
are not derived from the Library, and can be reasonably considered independent and separate
works in themselves, then this License, and its terms, do not apply to those sections when you
distribute them as separate works. But when you distribute the same sections as part of a whole
which is a work based on the Library, the distribution of the whole must be on the terms of this
License, whose permissions for other licensees extend to the entire whole, and thus to each
and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or
collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with
a work based on the Library) on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this
License to a given copy of the Library. To do this, you must alter all the notices that refer to this
License, so that they refer to the ordinary GNU General Public License, version 2, instead of to
this License. (If a newer version than version 2 of the ordinary GNU General Public License has
Legal
153
appeared, then you can specify that version instead if you wish.) Do not make any other change
in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU
General Public License applies to all subsequent copies and derivative works made from that
copy.
This option is useful when you wish to copy part of the code of the Library into a program that is
not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in
object code or executable form under the terms of Sections 1 and 2 above provided that you
accompany it with the complete corresponding machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange.
If distribution of object code is made by offering access to copy from a designated place, then
offering equivalent access to copy the source code from the same place satisfies the
requirement to distribute the source code, even though third parties are not compelled to copy
the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work
with the Library by being compiled or linked with it, is called a "work that uses the Library". Such
a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope
of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a
derivative of the Library (because it contains portions of the Library), rather than a "work that
uses the library". The executable is therefore covered by this License. Section 6 states terms for
distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library,
the object code for the work may be a derivative work of the Library even though the source
code is not. Whether this is true is especially significant if the work can be linked without the
Library, or if the work is itself a library. The threshold for this to be true is not precisely defined
by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and
small macros and small inline functions (ten lines or less in length), then the use of the object
file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing
this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the
work under the terms of Section 6. Any executables containing that work also fall under Section
6, whether or not they are linked directly with the Library itself.
Legal
154
6. As an exception to the Sections above, you may also combine or link a "work that uses the
Library" with the Library to produce a work containing portions of the Library, and distribute that
work under terms of your choice, provided that the terms permit modification of the work for the
customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that
the Library and its use are covered by this License. You must supply a copy of this License. If
the work during execution displays copyright notices, you must include the copyright notice for
the Library among them, as well as a reference directing the user to the copy of this License.
Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code
for the Library including whatever changes were used in the work (which must be distributed
under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the
complete machine-readable "work that uses the Library", as object code and/or source code, so
that the user can modify the Library and then relink to produce a modified executable containing
the modified Library. (It is understood that the user who changes the contents of definitions files
in the Library will not necessarily be able to recompile the application to use the modified
definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable
mechanism is one that (1) uses at run time a copy of the library already present on the user's
computer system, rather than copying library functions into the executable, and (2) will operate
properly with a modified version of the library, if the user installs one, as long as the modified
version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the
same user the materials specified in Subsection 6a, above, for a charge no more than the cost
of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place,
offer equivalent access to copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have
already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data
and utility programs needed for reproducing the executable from it. However, as a special
exception, the materials to be distributed need not include anything that is normally distributed
(in either source or binary form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component itself accompanies the
executable.
It may happen that this requirement contradicts the license restrictions of other proprietary
libraries that do not normally accompany the operating system. Such a contradiction means you
cannot use both them and the Library together in an executable that you distribute.
Legal
155
7. You may place library facilities that are a work based on the Library side-by-side in a single
library together with other library facilities not covered by this License, and distribute such a
combined library, provided that the separate distribution of the work based on the Library and of
the other library facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library,
uncombined with any other library facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work
based on the Library, and explaining where to find the accompanying uncombined form of the
same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly
provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under this License will not have
their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Library or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Library (or any work based on the Library), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or modifying the
Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient
automatically receives a license from the original licensor to copy, distribute, link with or modify
the Library subject to these terms and conditions. You may not impose any further restrictions
on the recipients' exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other
reason (not limited to patent issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse you
from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royaltyfree redistribution of the Library by all those who receive copies directly or indirectly through
you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance,
the balance of the section is intended to apply, and the section as a whole is intended to apply
in other circumstances.
Legal
156
It is not the purpose of this section to induce you to infringe any patents or other property right
claims or to contest validity of any such claims; this section has the sole purpose of protecting
the integrity of the free software distribution system which is implemented by public license
practices. Many people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and
a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the
rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents
or by copyrighted interfaces, the original copyright holder who places the Library under this
License may add an explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser
General Public License from time to time. Such new versions will be similar in spirit to the
present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number
of this License which applies to it and "any later version", you have the option of following the
terms and conditions either of that version or of any later version published by the Free
Software Foundation. If the Library does not specify a license version number, you may choose
any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution
conditions are incompatible with these, write to the author to ask for permission. For software
which is copyrighted by the Free Software Foundation, write to the Free Software Foundation;
we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH
YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
Legal
157
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO
OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
GNU Lesser General Public License (Version 3)
Version 3, 29 June 2007
Copyright © 2007 Free Software Foundation, Inc. 
Everyone is permitted to copy and distribute verbatim copies of this license document, but
changing it is not allowed.
This version of the GNU Lesser General Public License incorporates the terms and conditions
of version 3 of the GNU General Public License, supplemented by the additional permissions
listed below.
0. Additional Definitions.
As used herein, “this License” refers to version 3 of the GNU Lesser General Public License,
and the “GNU GPL” refers to version 3 of the GNU General Public License.
“The Library” refers to a covered work governed by this License, other than an Application or a
Combined Work as defined below.
An “Application” is any work that makes use of an interface provided by the Library, but which is
not otherwise based on the Library. Defining a subclass of a class defined by the Library is
deemed a mode of using an interface provided by the Library.
A “Combined Work” is a work produced by combining or linking an Application with the Library.
The particular version of the Library with which the Combined Work was made is also called the
“Linked Version”.
The “Minimal Corresponding Source” for a Combined Work means the Corresponding Source
for the Combined Work, excluding any source code for portions of the Combined Work that,
considered in isolation, are based on the Application, and not on the Linked Version.
The “Corresponding Application Code” for a Combined Work means the object code and/or
source code for the Application, including any data and utility programs needed for reproducing
Legal
158
the Combined Work from the Application, but excluding the System Libraries of the Combined
Work.
1. Exception to Section 3 of the GNU GPL.
You may convey a covered work under sections 3 and 4 of this License without being bound by
section 3 of the GNU GPL.
2. Conveying Modified Versions.
If you modify a copy of the Library, and, in your modifications, a facility refers to a function or
data to be supplied by an Application that uses the facility (other than as an argument passed
when the facility is invoked), then you may convey a copy of the modified version:
a) under this License, provided that you make a good faith effort to ensure that, in the event an
Application does not supply the function or data, the facility still operates, and performs
whatever part of its purpose remains meaningful, or
b) under the GNU GPL, with none of the additional permissions of this License applicable to that
copy.
3. Object Code Incorporating Material from Library Header Files.
The object code form of an Application may incorporate material from a header file that is part of
the Library. You may convey such object code under terms of your choice, provided that, if the
incorporated material is not limited to numerical parameters, data structure layouts and
accessors, or small macros, inline functions and templates (ten or fewer lines in length), you do
both of the following:
a) Give prominent notice with each copy of the object code that the Library is used in it and that
the Library and its use are covered by this License.
b) Accompany the object code with a copy of the GNU GPL and this license document.
4. Combined Works.
You may convey a Combined Work under terms of your choice that, taken together, effectively
do not restrict modification of the portions of the Library contained in the Combined Work and
reverse engineering for debugging such modifications, if you also do each of the following:
a) Give prominent notice with each copy of the Combined Work that the Library is used in it and
that the Library and its use are covered by this License.
b) Accompany the Combined Work with a copy of the GNU GPL and this license document.
c) For a Combined Work that displays copyright notices during execution, include the copyright
notice for the Library among these notices, as well as a reference directing the user to the
copies of the GNU GPL and this license document.
Legal
159
d) Do one of the following:
0) Convey the Minimal Corresponding Source under the terms of this License, and the
Corresponding Application Code in a form suitable for, and under terms that permit, the user to
recombine or relink the Application with a modified version of the Linked Version to produce a
modified Combined Work, in the manner specified by section 6 of the GNU GPL for conveying
Corresponding Source.
1) Use a suitable shared library mechanism for linking with the Library. A suitable
mechanism is one that (a) uses at run time a copy of the Library already present on the user's
computer system, and (b) will operate properly with a modified version of the Library that is
interface-compatible with the Linked Version.
e) Provide Installation Information, but only if you would otherwise be required to provide such
information under section 6 of the GNU GPL, and only to the extent that such information is
necessary to install and execute a modified version of the Combined Work produced by
recombining or relinking the Application with a modified version of the Linked Version. (If you
use option 4d0, the Installation Information must accompany the Minimal Corresponding Source
and Corresponding Application Code. If you use option 4d1, you must provide the Installation
Information in the manner specified by section 6 of the GNU GPL for conveying Corresponding
Source.)
5. Combined Libraries.
You may place library facilities that are a work based on the Library side by side in a single
library together with other library facilities that are not Applications and are not covered by this
License, and convey such a combined library under terms of your choice, if you do both of the
following:
a) Accompany the combined library with a copy of the same work based on the Library,
uncombined with any other library facilities, conveyed under the terms of this License.
b) Give prominent notice with the combined library that part of it is a work based on the Library,
and explaining where to find the accompanying uncombined form of the same work.
6. Revised Versions of the GNU Lesser General Public License.
The Free Software Foundation may publish revised and/or new versions of the GNU Lesser
General Public License from time to time. Such new versions will be similar in spirit to the
present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library as you received it specifies
that a certain numbered version of the GNU Lesser General Public License “or any later
version” applies to it, you have the option of following the terms and conditions either of that
published version or of any later version published by the Free Software Foundation. If the
Library as you received it does not specify a version number of the GNU Lesser General Public
Legal
160
License, you may choose any version of the GNU Lesser General Public License ever
published by the Free Software Foundation.
If the Library as you received it specifies that a proxy can decide whether future versions of the
GNU Lesser General Public License shall apply, that proxy's public statement of acceptance of
any version is permanent authorization for you to choose that version for the Library.
License
Copyright © 2001 Keith Packard
Permission to use, copy, modify, distribute, and sell this software and its documentation for any
purpose is hereby granted without fee, provided that the above copyright notice appear in all
copies and that both that copyright notice and this permission notice appear in supporting
documentation, and that the name of Keith Packard not be used in advertising or publicity
pertaining to distribution of the software without specific, written prior permission. Keith Packard
makes no representations about the suitability of this software for any purpose. It is provided
"as is" without express or implied warranty.
THE AUTHOR(S) DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Copyright © 2002-2003 by Juliusz Chroboczek
Permission is hereby granted, free of charge, to any person obtaining a copy of this software
and associated documentation files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the Software is furnished to
do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Legal
161
libxml2 License
Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio files,
which are covered by a similar licence but with different Copyright notices) all the files are:
Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software
and associated documentation files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the Software is furnished to
do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising
or otherwise to promote the sale, use or other dealings in this Software without prior written
authorization from him.
hash.c License
hash.c: chained hash tables
Reference: Your favorite introductory book on algorithms
Copyright (C) 2000 Bjorn Reese and Daniel Veillard.
Permission to use, copy, modify, and distribute this software for any purpose with or without fee
is hereby granted, provided that the above copyright notice and this permission notice appear in
all copies.
THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE AUTHORS AND
CONTRIBUTORS ACCEPT NO RESPONSIBILITY IN ANY CONCEIVABLE MANNER.
Author: breese@users.sourceforge.net
Legal
162
list.c License
list.c: lists handling implementation
Copyright (C) 2000 Gary Pennington and Daniel Veillard.
Permission to use, copy, modify, and distribute this software for any purpose with or without fee
is hereby granted, provided that the above copyright notice and this permission notice appear in
all copies.
THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE AUTHORS AND
CONTRIBUTORS ACCEPT NO RESPONSIBILITY IN ANY CONCEIVABLE MANNER.
Author: Gary.Pennington@uk.sun.com
trio.c License
Copyright (C) 1998 Bjorn Reese and Daniel Stenberg.
Permission to use, copy, modify, and distribute this software for any purpose with or without fee
is hereby granted, provided that the above copyright notice and this permission notice appear in
all copies.
THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE AUTHORS AND
CONTRIBUTORS ACCEPT NO RESPONSIBILITY IN ANY CONCEIVABLE MANNER.
locapi License
Copyright (c) 2009, QUALCOMM USA, INC.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
Legal
Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
Neither the name of the QUALCOMM USA, INC. nor the names of its contributors may
be used to endorse or promote products derived from this software without specific prior
written permission.
163
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
pimd License
Copyright (c) 1998-2001
University of Southern California/Information Sciences Institute.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. Neither the name of the project nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Part of this program has been derived from mrouted.
Legal
164
The mrouted program is covered by the license in the accompanying file named
"LICENSE.mrouted".
The mrouted program is COPYRIGHT 1989 by The Board of Trustees of Leland Stanford Junior
University.
shadow License
Copyright (c) 1989 - 1994, Julianne Frances Haugh
Copyright (c) 1996 - 2000, Marek Michałkiewicz
Copyright (c) 2001 - 2006, Tomasz Kłoczko
Copyright (c) 2007 - 2009, Nicolas François
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. The name of the copyright holders or contributors may not be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ISC License
Copyright 2004-2010 by Internet Systems Consortium, Inc. ("ISC")
Copyright 1995-2003 by Internet Software Consortium
Legal
165
Permission to use, copy, modify, and/or distribute this software for any purpose with or without
fee is hereby granted, provided that the above copyright notice and this permission notice
appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY
SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
OpenSSL License
Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the
following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or
promote products derived from this software without prior written permission. For written
permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL”
appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS
Legal
166
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This
product includes software written by Tim Hudson (tjh@cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions
are adhered to. The following conditions apply to all code found in this distribution, be it the
RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with
this distribution is covered by the same copyright terms except that the holder is Tim Hudson
(tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be
removed. If this package is used in a product, Eric Young should be given attribution as the
author of the parts of the library used. This can be in the form of a textual message at program
startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and
the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the
following acknowledgement:
“This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com)”
Legal
167
The word ‘cryptographic’ can be left out if the routines from the library being used are not
cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps
directory (application code) you must include an acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publicly available version or derivative of this code
cannot be changed. I.e. this code cannot simply be copied and put under another distribution
licence [including the GNU Public Licence.]
Trademarks
SPRINT and the logo are trademarks of Sprint.
NETGEAR and the NETGEAR logo are trademarks of NETGEAR, Inc.
Windows® is a registered trademark of Microsoft Corporation.
Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Wi-Fi, WPA, and WPA2 are registered marks of the Wi-Fi Alliance.
QUALCOMM® is a registered trademark of QUALCOMM Incorporated.
Other trademarks are the property of the respective owners.
Copyright
©2013 Sprint. All rights reserved. No reproduction in whole or in part without prior written
approval.
Legal
168
Limitation of Liability
The information in this manual is subject to change without notice and does not represent a
commitment on the part of NETGEAR, Inc. NETGEAR AND ITS AFFILIATES SPECIFICALLY
DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL,
INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT
NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR
REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY NETGEAR PRODUCT,
EVEN IF NETGEAR AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD
PARTY.
Notwithstanding the foregoing, in no event shall NETGEAR and/or its affiliates aggregate liability
arising under or in connection with the NETGEAR product, regardless of the number of events,
occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for
the NETGEAR product.
Additional Information and Updates
For up-to-date product descriptions, documentation, application notes, firmware upgrades,
troubleshooting tips, and press releases, visit netgear.com.
Legal
169
Index
3G
Cannot connect, 123
Coverage type, 61
Ec/Io of network connection, 61
Network service, improving, 117
Overview, 8
RSSI of network connection, 61
Service type (PS), 61
3G Connection LED, 9
4G LTE
Cannot connect, 123
802.11
Mode, options, 25
Standards supported, 126
About page, 73
Access Point Name (APN), 57
Active, 58
Authentication code, 58
Configuring, 92
Password, 58
Username, 58
Accessories, purchasing, 6
Account
Activate from the Home page, 14
Details, resetting, 95
Information, accessing, 6
Summary, 15
Activate your account
Hands-free, 4
Home page, 14
Activation date, viewing, 89
Active APN, 58
Address reservation, 68
admin (administrator)
Password, changing, 87
admin password
Forgotten; what do I do?, 112
Alerts
Common types, 13
Description, 13
Index
Title, 13, 79
Allowed network mode, setting the, 91
Altitude, 40
"Always on", and billing, 113
Antennas, attaching, 2
Application
Port filtering, disable, 86
Port filtering, enable, 86
Port forwarding, disable, 84
Port forwarding, enable, 83
Application notes, 169
Authentication code
APN, 58
Auto (DNS Mode), 65, 83
Baby monitors, 116
Back up settings, 50
Back view of gateway, 2
Band
LTE network connection, 61
Bands supported
Receive, 125
Transmit, 125
Base station, WDS, 36
Billing and "always on", 113
Billing cycle
Data usage, 14, 15
Reset displayed data usage, 15
Black list
MAC filter, 32
MAC filtering, 26, 27
Port filtering, 68
Block list
Wi-Fi, enable/disable, 30
Blocked devices
Display, 31
Unblock, 31
Box contents, 1
Broadband settings, 62
Broadcast Wi-Fi network name, 26, 75
Browsers supported, 2
170
Button
Power, 8
Wi-Fi On/Off, 10
WPS, 10
Cannot check for updates, 124
Cannot connect to the 3G or LTE network,
123
Cannot connect to Wi-Fi, 121
Cannot display the Home page, 122
Care of your gateway, 2
Carrier name, 16
Changing the gateway URL, 87
Channel
Number, LTE, 61
UL, LTE, 61
Wi-Fi, 34
Check for Update, 50
Clear Programming, 50
Client-to-Gateway VPN, 98
Enabling, 102
Cloning, MAC address, 53
Components of your gateway, 7
Configure
Gateway, 47
Network settings, 47
Router settings, 47
Wi-Fi connection settings, 23
Wi-Fi security, 23
Connect to Internet
3G network service, improving, 117
Cannot connect, 123
Launching a connection, 10
Connect to mobile network, button, 16
Connected
How to connect with Wi-Fi, 111
How to tell you’re connected to
GSM/3G/LTE, 111
Connected devices
Display, 31
Information, 20
List, 16
Connection
3G network service, improving, 117
Internet connection status, 60
Index
Connection Rate, 25
Connection status, 61
LEDs, 9
Contents, package, 1
Continuous GPS fix, 40
Copyright information, 168
Cordless phones, 116
Corporate network, accessing through VPN,
114
Could not connect to remote server, 122
Coverage
Maps, 6
Type, 3G, 61
CTS/RTS handshaking, 25
Current, electrical (specifications), 125
Customer Service, contacting, 6
Data
Connection, launching, 10
Plan type, 15
Transmit indicators, 16
Usage, viewing, 89
Data Usage details, 14
Date & Time Settings page, 51
Default settings, software reset, 96
Destination IP Address (DMZ), 85
Devices
Connected to Guest Wi-Fi, 21
Connected to Main Wi-Fi, 21
Connected, list, 16
Devices page, 20
DHCP
Description, 81
Enabling, 82
IP Address Range, 65, 82
Lease time, 65, 82
Server, enable/disable, 65
Start and end address, 82
Digital Rate Control
Channel number, 62
Cover, 61
Value, 61
Dimensions of gateway, 127
Disable
GPS, 40, 41
171
Disconnect from mobile network, button, 16
Display
Blocked devices, 31
Connected devices, 31
DMZ
Address, 65
Configuring, 85
Enable/disable, 65
Enabling, 84
DNS mode, 65
Setting, 82
Domestic roaming guard, 57
Downloading
Firmware, 95
Software updates, 94
DRC
Channel number, 62
Cover, 61
Value, 61
Dual WAN settings, 62
Dynamic DNS, 42
Dynamic Host Control Protocol. See DHCP
Ec/Io
3G, 61
Electrical specifications, 125
Email server, accessing, 66
Enable
GPS, 41
Enable GPS, 40
Encryption
Method in use, 75
Protocols supported, 126
Type, Guest Wi-Fi, 26
Type, Main Wi-Fi, 26
Environmental specifications, 127
Ethernet
LAN connections, 5
LAN LED, 9
WAN connection, 76
WAN LED, 9
Ethernet WAN settings, 76
Export, gateway settings, 93
Facebook link, 76
Factory Reset, 50
Index
FAQ, 114
FAX, 126
FCC
ID, 130
Regulatory notices, 130
Feedback, 75
Link, 73
File sharing, USB, 44
Filtered ports list, 68
Firewall rules, 70
Firewall software, 123
Firmware
Upgrading, 95
Version, 75
First time usage, 4
Fix
GPS, type of fix, 40
Forgot admin password, 112
Forgot Wi-Fi password, 112
Fragmentation Threshold, 26
Frequencies, transmit and receive, 125
Front view of gateway, 1
FTP server, accessing, 66
Gaming, Internet, 66
gateway
URL, 48
Gateway
Components, 7
Drawing, 1
Information, viewing, 73
Resetting, 95
Settings, resetting, 96
Settings, restoring, 93
Settings, saving, 93
Telephone number, 74
User Guide, 76
Where to place, 3
Gateway basics, 7
gateway URL, changing, 87
General page, 47
General Public License, GNU, 132
GNU General Public License, 132
GPL (v2) License, 132
GPL (v3) License, 138
172
GPS
Altitude, 40
Availability, 113
Enable ./ disable, 40
Enable/disable, 41
FAQ, 113
Heading, 40
Latitude, 40
Limitations, 113
Longitude, 40
Metric units, 40
Mode, 40
Mode, setting, 41
Not working or doesn’t seem to be
available, 124
Overview, 113
Satellites, number used, 40
Speed, 40
Standard units, 40
Status, 40
Streaming data, 113
Timestamp, 40
Units, select metric or standard, 42
GPS page, 38
GSM
Roaming support, 111
Guest Wi-Fi
Devices connected, list, 21
Guest Wi- Fi name
Changing, 29
Guest Wi-Fi network
Name, 23, 25
Setting up, 18
Turn on / off, 23
Guest Wi-Fi Network
Turning off, 19
Turning on, 18
Guest Wi-Fi password
Changing, 29
Hands-free activation, 4
Re-run, 57
Hardware (drawing), 1
Hazards, 129
Heading, 40
Index
Height of gateway, 127
Help, getting
Customer Service, contacting, 6
FAQ (Frequently Asked Questions), 111
Sprint website, 6
Tips, 116
Troubleshooting, 121
Home page, 11
Cannot display, 122
Humidity specification, 127
ICCID, 74
ICCID, 61
Import (router settings), 94
Import gateway settings, 93
Important notice, 129
IMSI, LTE, 61
Information about your gateway, 73
Installation requirements, 2
International roaming guard, 57
Internet connection
Data usage, viewing, 89
Launching, 10, 18
Sharing, 19
Internet Explorer cannot display the
webpage, 122
Internet LED, 10
IOTA, 126
IP address
3G, 61
DHCP Range, 65
Finding for a device, 119
LTE, 61
Port forwarding, 83
Routing hardware, 65
IP address obtain automatically, 81
IP address reservation, 68
ipconfig command, 120
ipconfig/all command, 119
ISC License, 165
Knowledge base, 121
Latitude, 40
LBS. See GPS
Lease time, DHCP, 65, 82
LED colors, 127
173
LEDs, 9
3G, 9
Ethernet LAN, 9
Ethernet WAN, 9
Internet, 10
LTE, 9
Power, 10
Signal Quality, 9
Turn off and on, 48, 80
USB, 9
Wi-Fi, 9
Length of gateway, 127
LGPL (v2.1) License, 150
LGPL (v3) License, 158
Liability, limitation of, 169
libxml2 License, 162
Licenses, 132, 161
Limitation of liability, 169
Limitations, GPS, 113
locapi License, 163
Location Based Services. See GPS
Log In to your gateway, 11
Logging events, 50
Login password
Changing, 87
Forgotten; what do I do?, 112
Longitude, 40
LTE
IP address of 3G network connection, 61
IP address of LTE network connection, 61
Overview, 8
Radio channel number for LTE network
connection, 61
Roaming support, 111
RSRP of LTE network connection, 60
RSRQ of LTE network connection, 60
RS-SINR of LTE network connection, 60
TX power of LTE network connection, 61
Upload channel for LTE network
connection, 61
LTE Connection LED, 9
MAC address, cloning, 53
MAC address, finding for a device, 118
Mac computer
Index
VPN client, 105
MAC Filter, 26
Black list, 32
Control network access, 32
Mode, 27
White list, 32
Wi-Fi page, 26
Main Wi-Fi
Changing the name, 29
Changing the password, 29
Devices connected, list, 21
name, 22
Network, name, 25
Maintenance of your gateway, 2
Manage your Sprint account by telephone,
72, 73
Manual (DNS Mode), 65, 83
Manual configuration, 57
Manual DNS Server fields, 83
Maximum number
Of Wi-Fi devices, set, 35
MDN, 61
Mechanical specifications, 127
Metric units for GPS, 40
Metric units for GPS, 42
Micro-SIM, 10
Microwaves, 116
Mobile broadband
Connection details, 59
Overview, 8
Mobile Directory Number of device, 61
Mobile Station Identifier, 61
MSID, 61
MTU size, 78
MTU size, changing, 80
My Sprint link, 15
Name
Guest Wi-Fi, changing, 29
Main Wi-Fi, changing, 29
NETGEAR knowledge base, 121
Network
3G, overview, 8
4G LTE, overview, 8
Activation date, viewing, 89
174
Cannot connect, 123
Carrier name, 16
Connection status, 61
Internet Connection status, 60
Mobile broadband connection details, 59
Mobile broadband status details, 59
Mode allowed, setting the, 91
Protocols supported, 126
Service, 3G, improving, 117
Type to connect, 56
Type, current connection, 16
network connections, 18
Network Setup page, 55
Network, corporate, accessing through
VPN, 114
Notice, important, 129
Notices, regulatory, 130
One-time GPS fix, 40
Online games, 67
Oops! This link appears to be broken, 122
OpenSSL License, 166
Operating temperature, 127
Operator name, 16
Original SSLeay License, 167
OTAPA, 126
OTASP, 126
Package contents, 1
Packet size, 25
Password
admin, changing, 87
admin, forgotten - what do I do?, 112
APN, 58
Guest Wi-Fi, changing, 29
Main Wi-Fi, changing, 29
Wi-Fi, forgotten - what do I do?, 112
Password recovery, 87
Patents, 132
Performance, Wi-Fi, improving, 117
pimd License, 164
Place for your gateway, tips, 116
Plug and Play, Universal (UPnP), 81
Port filtering
Adding application to list, 86
Description, 67
Index
Disabling for an application, 86
Enable/disable, 68
Enabling, 85
Port Filtering tab, 67
Port forwarding
Description, 65
Disabling for an application, 84
Enable/disable, 67
Enabling, 83
Enabling for an application, 83
Port Forwarding tab, 65
Power button
Usage, 8
Power LED, 10
Powering the gateway on or off, 9
Preferred Roaming List. See PRL
PRL version, 62
PRL, update, 57
Problems. See Troubleshooting
Protocol field
Port filtering, 86
Port forwarding, 84
Protocols, network, supported, 126
PS service type, 3G, 61
Questions, frequently asked (FAQ), 111
Radio frequency (RF) specifications, 125
Receive data indicator, 16
Receive frequencies, 125
Regulatory notices, 130
Remote Desktop, accessing, 66
Remote Management page, 54
Repeater, WDS, 37
Require SIM PIN to use gateway, 58
Requirements, installation, 2
Resetting
Account details, 95
Gateway, 95
Gateway settings, 96
Software to default settings, 96
Restore settings, 50, 93
RF (Radio Frequency) specifications, 125
RF Exposure notice, 130
Roaming
GSM support, 111
175
Indicator, 62
LTE support, 111
Message, 16
Mode, 56
Mode, setting, 90
Status, 16
Roaming Guard, 57
Roaming Guard warnings, enable/disable,
91
Router
IP Address, 65
Settings, configure, 47
Router ALG page, 69
Router Basic page, Settings page, 63
Router Port Filtering, Settings page, 67
Router Port Forwarding, Settings page, 65
Routing hardware, 8
IP address, 65
Resetting to default settings, 96
Subnet mask, 65
RSRP, 60
RSRQ, 60
RSSI, 61
Improving, 116
Insufficient, 121
RS-SINR
LTE, 60
RTS Threshold, 25
RX Frequencies, 125
Safari can’t open the page, 122
Safety and hazards, 129
Satellites, number used for GPS fix, 40
Saving gateway settings, 93
Security
Encryption type, Guest Wi-Fi, 26
Encryption type, Main Wi-Fi, 26
MAC filtering, 26
Protocols supported, 126
SIM PIN required to use gateway, 58
Standard in use for Wi-Fi network
encryption, 75
Tips, 118
Wi-Fi, 27
Send data indicator, 16
Index
Server, accessing, 66
Service plan, add additional options, 6
Serving Cell ID, 60
Serving SID (home network area identifier),
62
Session Data usage, 14
Settings
Backup, 50
Exporting, 93
Importing, 93
Restore, 50
Settings page, 47
Software and Reset, 48
Settings Reset, 50
shadow License, 165
Sharing your Internet connection, 19
Short text messaging (SMS), 126
Signal Quality LED, 9
Signal strength, 16
Improving, 116
Insufficient, 121
SIM
ICCID, 74
Security, activate or deactivate, 59
SIM Security, Settings page, 58
Site-to-Site VPN, 108
Enabling, 109
Size of gateway, 127
SMS, 126
Software
Resetting to default settings, 96
Specifications, 126
Updates, downloading, 94
Software and Reset Settings page, 48
Specifications
Electrical, 125
Environmental, 127
Mechanical, 127
Radio frequency (RF), 125
Software, 126
Speed, GPS, 40
Sprint
Customer Service, contacting, 6
Website, 6
176
ssh support, 115
SSID, 75
SSLeay License, Original, 167
Standard units for GPS, 40, 42
Standby current, 125
Status connection details, 15
Status Details, Settings page, 59
Storage
Guidelines, 2
Temperature, 127
Streaming GPS data, 113
Subnet mask, 65
Support, 72
Contacting, 6
Website link, 71, 73
Survey of customer feedback, 76
System Logs page, Settings page, 50
System requirements, 2
TCP/IP settings, 81
Technical support, contacting, 6
Telephone number, hotspot, 15, 61, 74
telnet support, 115
Temperature
Operating, 127
Storage, 127
Terminal sessions, 115
Text messaging (SMS), 126
The connection has timed out (message),
122
Timeout
Connection timeout (cannot display the
home page), 122
Tips, 116
Trademarks, 168
Transmit
Data indicators, 16
Frequencies, 125
Transmitter power
LTE, 61
Troubleshooting
Cannot connect to the 3G or LTE
network, 123
Cannot connect to Wi-Fi, 121
Cannot display the home page, 122
Index
General tips, 121
TTY support, 126
Turn off Guest Wi-Fi network, 19
Turn on Guest Wi-Fi network, 18
Turning the gateway on, 9
TVs, 116
Twitter link, 76
TX
Frequencies, 125
Power, LTE, 61
Unblock devices, 31
Universal Plug and Play. See UPnP
Update network settings, 57
Update PRL, 57
Update software and firmware, 94
Updates,cannot check for, 124
Upload channel for LTE network
connection, 61
UPnP, 81
Enable/disable, 81
Status, 64
URL (Web UI name), 48
Usage guidelines for your gateway, 2
USB drives, sharing, 44
USB LED, 9
User guide
Location, 71, 73
On device, 76
Username, APN, 58
Virtual Private Network, 98
VPN, 98
Accessing, 114
Client-to-gateway, 98
Client-to-gateway connection, 100
Overview, 98
Passthrough types supported, 126
Site-to-Site, 108
VPN client
Mac computer, 105
Windows-based computer, 103
VPN Client-to-Gateway
Enabling, 102
VPN Users, 98
VPN, Site-to-Site
177
Enabling, 109
WAN Ethernet settings, 76
WAN settings, 77
Warning (EMI), 130
WDS base station, 36
WDS Repeater, 37
Web Browser Interface, 11
Web browsers supported, 2
Web server, accessing, 66
Website
NETGEAR, 169
Sprint, 6
Weight of gateway, 127
White list
MAC filtering, 26, 27, 32
Port filtering, 68
Width of gateway, 127
Wi-Fi
Access points, 7
Block list, enable/disable, 30
Broadcast network name, 26, 75
Cannot connect, 121
Channel, 25, 34
Connecting manually, 19
Connecting to, 111
Encryption type, 27
Guest, encryption type, 26
MAC address, 75
MAC Filter, Wi-Fi page, 26
Main, encryption type, 26
Index
Maximum number of devices, set, 35
Network name, main, 75
Password, forgot, 112
Performance, improving, 117
Security, 27
Security and encryption protocols
supported, 126
Wi-Fi Connect page, 21
Wi-Fi LED, 9
Wi-Fi network, connecting to, 4
Wi-Fi On/Off button, 10
Wi-Fi Options page, Wi-Fi page, 23
Wi-Fi Protected Setup (WPS)
FAQ, 114
Performing, 19
Wi-Fi Range, 25
Windows XP, improving Wi-Fi performance,
117
wireless base station, 36
Wireless Distribution System (WDS), 35
Wireless repeater, 36
Wireless speakers, 116
WPS
Button, 10
Button for pairing Main Wi-Fi, 22
Limitations, 19
Performing, 19
XP, Windows, improving Wi-Fi performance,
117
178

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Author                          : Betsy Miller
Create Date                     : 2013:10:31 10:53:44-07:00
Modify Date                     : 2013:11:08 10:42:06+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - 61000D_UM_31Oct13_temp4Han
Creator                         : Betsy Miller
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:11:08 10:42:06+08:00
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:46020b20-139f-4ae8-adcb-17d31f8cb440
Instance ID                     : uuid:084b0467-47b3-445f-b82c-1c98af7b4f3b
Page Count                      : 186
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PY313200235

Navigation menu