Netgear orporated 15200311 Add-on DST Adapter User Manual Powerline 500 Model XAVB5221 Installation Guide
Netgear Incorporated Add-on DST Adapter Powerline 500 Model XAVB5221 Installation Guide
User manual.PDF
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2733050 |
| Application ID | S0jp6oaZ6acapKRT29TIug== |
| Document Description | User manual.PDF |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 97.98kB (1224693 bits) |
| Date Submitted | 2015-08-31 00:00:00 |
| Date Available | 2016-02-16 00:00:00 |
| Creation Date | 2015-07-27 11:19:18 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2015-07-27 11:19:24 |
| Document Title | Powerline 500 Model XAVB5221 Installation Guide |
| Document Creator | Adobe InDesign CS6 (Windows) |
| Document Author: | NETGEAR |
Quick Start PowerLEAP WiFi 1000 Quick Start Guide Package Contents In some regions, a resource CD is included with your product. Getting Started Powerline adapters give you an alternative way to extend your network using your existing electrical wiring. Plug two or more Powerline adapters into electrical outlets to create a wired network connection. Use a Powerline WiFi Access Point to add a WiFi access point to your wired network. You can add up to 8 Homeplug AV-certified and AV2-certified adapters to extend your network. For a complete list of Homeplug AV-certified devices, visit http://www.homeplug.org/certified_products. Meet Your Adapter Before you install your adapter, familiarize yourself with its LEDs, buttons, and port. 1. Power LED 4. Ethernet port 2. Ethernet LED 5. Factory Reset button 8. On/Off switch 3. Pick A Plug LED 6. Security button 7. Wireless LED 9. WPS button Power LED Solid green. The electrical power is on. Solid amber. The adapter is in power saving mode (PL1000 only). Blinking green. The adapter is in the process of setting up security. Off. The adapter is not receiving electrical power. Ethernet LED Solid. The Ethernet port is linked. Off. No Ethernet connection is detected. Pick A Plug LED The Pick A Plug feature lets you pick the electrical outlet with the strongest link performance, indicated by the color displayed by the LED: Red. Link rate < 50 Mbps (good). Amber. Link rate > 50 and < 80 Mbps (better). Green. Link rate > 80 Mbps (best). Off. The adapter did not find any other compatible Powerline devices using the same encryption key. Wireless LED Solid blue. The wireless radio is on. Off. The wireless radio is off. Factory Reset button Press the Factory Reset button for one second, then release it to return the Powerline adapter to its factory default settings. Ethernet port Connect your wired devices, including computers, WiFi routers or game consoles, to your Powerline network. Security button Use the Security button to create a secure Powerline network. On/Off switch Use the On/Off switch to turn the device on and off. WPS button Use the WPS button to automatically connect your computer or other wireless devices which support WPS, to your Powerline network. Install Your Adapters Room 1 Room 2 Secure Your Network ¾¾ To create a secure network: 1. Plug in your new adapters. 2. Wait until the Pick A Plug LEDs are lit. 3. Press the Security button for two seconds, then press the Security button on one of the other adapters in your existing network for two seconds. Both buttons must be pressed within two minutes. Note: The Security button does not work in power saving mode (see Troubleshooting Tips on page 18). Warning: Do not press the Security button on the Powerline adapter until installation is complete and the adapters are communicating with each other (indicated by the power LED). Pressing this button too soon can temporarily disable Powerline communication. If this occurs, use the Factory Reset button to return the Powerline adapter to its factory default settings. Set Up WiFi Access on Your PowerLEAP You can set up WiFi access on your PowerLEAP access point using NETGEAR genie or using the web browser setup guide. ¾¾ To set up WiFi access using NETGEAR genie: 1. Install NETGEAR genie (see Install NETGEAR genie on page 15). 2. Temporarily connect your computer directly to the PowerLEAP through the Ethernet port. 3. Launch NETGEAR genie on your computer and click Network Map or select it from the menu. 10 4. Click the Powerline icon on the Network Map screen. The Genie screen displays: PowerLEAP icon 5. On the Network Map screen, right-click the PowerLEAP icon. 6. From the pop-up menu that displays, select the Configuration item. The PowerLEAP web interface displays. Note: The default user name and password are admin and password. 7. Enter the following wireless settings: • Wireless Network Name (SSID) • Wireless Security Type • Passphrase 11 8. Click Apply. Your changes are saved. 9. When you are finished with the wireless settings, disconnect the Ethernet cable from the PowerLEAP. Now you can connect your wireless devices to the PowerLEAP access point. See Connect to the PowerLEAP Access Point on page 14. ¾¾ To set up WiFi access using the browser setup guide: 1. On your computer or wireless device (tablet, smartphone), open the software that manages your wireless network connections and connect to the PowerLEAP network. Note: The default network key (wireless security password) and the default wireless name (SSID) for 2.4GHz operation are printed on the product label. The SSID format is NETGEARxx_EXT at 2.4GHz and NETGEARxx-5G_EXT at 5GHz. 2. On the same computer or wireless device, open a web browser window. The browser takes you directly to the onscreen setup guide. If it does not, enter one of the following into the browser address bar: www.mywifiext.net www.netgearextender.net 12 3. When prompted to log in, enter: • User name: admin • Password: password The web browser setup guide helps you configure the wireless settings of the PowerLEAP. You can record the new wireless settings here: __________________________________________ Wireless network name (SSID) ___________________________________________ Network key (Passphrase) ___________________________________________ Now you can connect your wireless devices to the PowerLEAP access point. See Connect to the PowerLEAP Access Point on page 14. 13 Connect to the PowerLEAP Access Point You can connect your wireless devices (laptop, tablet, or smartphone) to the PowerLEAP access point manually or automatically. ¾¾ To manually connect to the PowerLEAP access point: 1. On your computer or wireless device (tablet, smartphone), open the software that manages your wireless network connections. 2. Connect to the PowerLEAP wireless network (SSID). 3. Enter the network key (passphrase). Your wireless device is now connected to the PowerLEAP access point and you can surf the web. ¾¾ To automatically connect to the PowerLEAP access point using a WPS button: 1. Press and hold the WPS button on the PowerLEAP for 2 seconds and release it. The Wireless LED starts to blink. 2. Press the WPS button on your wireless device for 2 seconds and release it. When the Wireless LED stops blinking, your wireless device is automatically connected to the PowerLEAP access point and you can surf the web. 14 Install NETGEAR genie ¾¾ To download and install NETGEAR genie on your computer: 1. 2. 3. 4. Type http://support.netgear.com into your browser address bar. Click the For Home button. In the search field, type PowerLEAP. Download the NETGEAR genie that corresponds to your OS environment (Windows or Mac). 5. Run the file that you downloaded and follow the on-screen instructions to install NETGEAR genie. Add Adapters To add adapters before you configure the security feature, just plug them in and connect the adapters to your equipment. ¾¾ To add adapters to a Powerline network with security set: 1. Plug the adapter into a wall outlet where you want to add Internet access. 15 2. If you used a private encryption key, press the Security button on one of the adapters already a part of the network for two seconds, then press the Security button on the new adapter for two seconds. Both buttons must be pressed within two minutes. 3. Secure the Powerline network: a. On any of the adapters, press and hold the Security button for two seconds. b. On any one of the other adapters, press and hold the Security button for two seconds. Both buttons must be pressed within two minutes. Note: The Security button does not work in power saving mode Do not press the Security button on the Powerline adapter until installation is complete and the adapters are communicating with each other (indicated by the blinking Power LED). Pressing this button too soon can temporarily disable Powerline communication. If this occurs, use the Factory Reset button to return the Powerline adapter to its factory default settings. 4. Wait for the Powerline network to recognize each Powerline device. This process could take as little as 5 seconds or up to 80 seconds. 16 When the Power LEDs stop blinking, the process is complete. If the Pick A Plug LEDs are green or amber, the devices are successfully connected to the Powerline network. A red Pick A Plug LED indicates a slow link rate. In this case, move the Powerline device to another electrical outlet with a faster connection. 5. If your adapter is a WiFi access point device, configure it for WiFi (see Set Up WiFi Access on Your PowerLEAP on page 9). 17 Troubleshooting Tips Power LED is off. Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into an extension cord, power strip, or surge protector. Power LED is amber. Power saving mode occurs when the Ethernet LED is off. This can occur in the following circumstances: Pick A Plug LED is off. • The Ethernet cable is unplugged. • The device connected through the Ethernet cable is turned off. • The adapter is idle for 10 minutes. It returns to normal mode within two seconds after the Ethernet link is up. • If you already set network security, make sure that all Powerline devices are using the same encryption key; see the online user manual for details. • Press the Factory Reset button on each device for one second to return the Powerline adapter to its factory default settings. 18 Pick A Plug LED is amber or red. Ethernet LED is off. Something is interferring with communication between adapters. To resolve this: • Move the adapters to another outlet. • Unplug devices that might be causing interference such as surge suppressors and items with motors. • Make sure that the Ethernet cables are working and securely plugged into the devices. • Press the Factory Reset button on each device for one second to return the Powerline adapter to its factory default settings. 19 Support Thank you for purchasing this NETGEAR product. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com. NETGEAR recommends that you use only the official NETGEAR support resources. You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product’s user interface. Trademarks © NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non NETGEAR trademarks are used for reference purposes only. Compliance For the current EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. NETGEAR Inc. BETA July 2015 350 East Plumeria Drive San Jose, CA 95134, USA FCC statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. “FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.”
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Title : Powerline 500 Model XAVB5221 Installation Guide Creator : NETGEAR Description : Powerline 500 Model XAVB5221 Installation Guide Subject : Ethernet, powerline network, network Create Date : 2015:07:27 11:19:18-07:00 Metadata Date : 2015:07:27 11:19:24-07:00 Modify Date : 2015:07:27 11:19:24-07:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:bc48f66a-8d4a-45ac-9524-cbf7513f6322 Original Document ID : xmp.did:A8CC6C8B074CE3119A19FC068604A92E Document ID : xmp.id:FC288AFE8B34E511B21AA6202238AC08 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:4CBEB07BA531E511A08C9A3014AE9132 Derived From Document ID : xmp.did:5BFBCBC428E1E311BCADF715A82AE6C0 Derived From Original Document ID: xmp.did:A8CC6C8B074CE3119A19FC068604A92E Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2015:07:27 11:19:18-07:00 Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 21 Author : NETGEAREXIF Metadata provided by EXIF.tools