Netgear orporated 17100371 Alro Baby User Manual Arlo Baby Quick Start Guide

Netgear Incorporated Alro Baby Arlo Baby Quick Start Guide

User Manual

Download: Netgear orporated 17100371 Alro Baby User Manual Arlo Baby Quick Start Guide
Mirror Download [FCC.gov]Netgear orporated 17100371 Alro Baby User Manual Arlo Baby Quick Start Guide
Document ID3360247
Application IDggmPc59r+LlUtBmOxs9Ewg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize117.93kB (1474176 bits)
Date Submitted2017-04-17 00:00:00
Date Available2017-10-15 00:00:00
Creation Date2017-03-02 11:59:01
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2017-04-13 13:07:01
Document TitleArlo Baby Quick Start Guide
Document CreatorAdobe InDesign CC 2017 (Windows)
Document Author: NETGEAR

Arlo Baby
Quick Start Guide
What’s Included
Welcome
Thank you for choosing Arlo Baby.
Getting started is easy.
Arlo Baby
camera
Quick Start Guide
USB power
cable
USB power
adapter
Wall-mount
plate
Mounting
screws
Plug In Your Camera
Get the App
Connect one end of the USB power cable to the port on the
camera.
For the best experience, download the Arlo app for your
smartphone by scanning this QR code or searching for Arlo in the
app store.
Plug the other end of the USB cable into the power adapter.
Plug the USB power adapter into a wall socket and wait for the
camera LED to blink amber.
arlo.netgear.com
Note: If you already use the Arlo app, make sure that you
are using the latest version. To find out if an update is
available, go to the app store and search for Arlo.
Get a New Account or Log In
Connect Your Camera
¾¾ To create a new Arlo account:
Follow the onscreen instructions either in the Arlo app or from a
computer to connect your camera to your router.
1.
Launch the Arlo app from your smartphone,
tap New to Arlo?, and select Arlo Baby.
If you are using a computer, visit
arlo.netgear.com.
2.
Note: If you own an Arlo Wire-Free system, do not connect your
Arlo Baby camera to the Arlo base station.
Follow the onscreen instructions.
¾¾ To add an Arlo Baby camera to an
existing Arlo account:
1.
If you already set up an Arlo account, log in
and click or tap Add Device.
2.
Follow the onscreen instructions.
Place Your Camera
You can place your camera on a shelf or other flat surface, or
you can mount it on the wall.
If you are mounting the camera on a wall, place the wall plate
and secure it with the included screws.
Note: Do not cover or obstruct the inlet holes for the sensors.
Align the wall plate with the holes on the base of the camera
and rotate the base until it snaps into place.
You’re Done!
Use Arlo Baby’s tilt and swivel functions to position the camera
so that it captures the area that you want to monitor.
Congratulations! Your Arlo Baby camera is set up and ready
to go.
To view useful tutorial videos, find troubleshooting tips, or get
support, visit support.arlo.com.
10
11
Arlo Baby Features
¾¾ Rechargeable Battery
¾¾ Night Light
Your Arlo Baby camera includes a built-in rechargeable
battery and can work for several hours at a time without
being plugged in. You can place the camera in locations
where you cannot connect it to a power outlet.
Use the app or the top
button on the right side of
the camera to turn the night
light on and off.
Off
Use the switch on the bottom
of the camera to power the Arlo
Baby camera’s battery off. The
camera’s battery is on when the
green color is visible.
¾¾ Music
On
Use the app or the bottom
button on the right side
of the camera to play and
pause music.
If the camera is unplugged and you don’t want the battery
to lose its charge, set the switch to off.
12
13
Camera LED Guide
Arlo Baby Characters
Arlo Baby cameras come with a bunny character set. You can
remove the bunny character set and replace it with other Arlo
Baby characters.
• Pull the character ears
up to remove them.
• To install character
ears, align the ears
with the camera lens
and press them onto
the camera.
• Rotate the character
feet and pull them off
to remove them.
• To install character
feet, align the foot
plate with the holes
on the bottom of the
camera and rotate
the foot plate until it
clicks into place.
Solid blue
The camera is
powered on and is
connected to the
Internet.
Solid purple
The camera is
connected to a WiFi
network. However, it
is not connected to
the Internet.
Solid amber
The camera is
booting.
Fast blinking
blue
The camera is
connecting to the
Internet.
Blinking purple
The camera is too
far away from the
router.
Double blink
amber every 15
seconds
The camera battery
charge is low.
Fast blinking
blue for three
seconds
The camera was
connected to a
charger.
Fast blinking
amber
The camera is not
connected to a
WiFi network.
14
Blinking blue and
amber
A firmware update
is in progress. DO
NOT TURN OFF THE
CAMERA.
Off
The camera is
powered off.
15
©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of
NETGEAR, Inc.
Compliance
For the current EU Declaration of Conformity, visit
kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
netgear.com/about/regulatory/.
350 East Plumeria Drive
San Jose, CA 95134, USA
March 2017
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Industry Canada statement:
Thisdevice
device complies
complies with
with RSS-247
of the Industry RSSs.
Canada
Rules. Operation
is to the
This
ISED's licence-exempt
Operation
is subject
following
(1)conditions:
This device(1)
may
cause
harmful
interference, and
subject totwo
theconditions:
following two
Thisnot
device
may
not cause
(2)
this device
must accept
any
interference
including
interference that
harmful
interference,
and (2)
this
device mustreceived,
accept any
interference
may
causeincluding
undesired
operation.that may cause undesired operation.
received,
interference
Le
appareil
est conforme
auxCNR-247d'Industrie
CNR d' ISED applicables
appareils radio
Ceprésent
dispositif
est conforme
à la norme
Canadaaux
applicable
exempts
de licence.
L'exploitation
est autorisée
aux deux conditions
suivantes :
aux appareils
radio exempts
de licence.
Son fonctionnement
est sujet aux
(1)
le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif
deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
doit accepter tout brouillage reçu, y compris un brouillage susceptible de
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y
provoquer un fonctionnement indésirable.
compris un brouillage susceptible de provoquer un fonctionnement
Caution :
(i)indésirable.
the device for operation in the band 5150-5250 MHz is only for indoor use to
Caution
: potential for harmful interference to co-channel mobile satellite
reduce the
(i) the device for operation in the band 5150-5250 MHz is only for indoor use
systems;
to the
reduce
the potential
for gain
harmful
interference
to co-channel
mobile
(ii)
maximum
antenna
permitted
for devices
in the bands
5250-5350
satellite
MHz
and systems;
5470-5725 MHz shall be such that the equipment still complies with the
(ii) high-power
e.i.r.p.
limit; radars are allocated as primary users (i.e. priority users) of
(iii)
maximum
antenna
gain
permitted
forand
devices
in theradars
band could
5725-5850 MHz
thethe
bands
5250-5350
MHz and
5650-5850
MHz
that these
shall
beinterference
such that the
equipment
complies
with the e.i.r.p. limits specified for
cause
and/or
damagestill
to LE-LAN
devices.
point-to-point
and non-point-to-point operation as appropriate; and
Avertissement:
(iv)
worst-case
tilt angle(s)
remain
with the e.i.r.p.
les the
dispositifs
fonctionnant
dansnecessary
la bande 5to150-5
250compliant
MHz sont réservés
elevation
mask
requirement
set àforth
in Section
6.2.2(3)
shall
clearly
uniquement
pour
une utilisation
l’intérieur
afin de
réduire
les be
risques
de indicated.
(v)
Users should also be advised that high-power radars are allocated as primary
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and
mêmes canaux;
that these radars could cause interference and/or damage to LE-LAN devices.
(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de
Avertissement:
radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,
Le
guide d'utilisation des dispositifs pour réseaux locaux doit inclure des
qu’ils
ont la précises
priorité) sur
pourles
lesrestrictions
bandes 5 250-5
350 MHz et 5 650-5
850 MHz
instructions
susmentionnées,
notamment
: et
radars pourraient
causer
du la
brouillage
et/ou des dommages
aux
(i)que
lesces
dispositifs
fonctionnant
dans
bande 5150-5250
MHz sont réservés
dispositifs LAN-EL.
uniquement
pour une utilisation à l'intérieur afin de réduire les risques de
Radiation préjudiciable
Exposure Statement:
brouillage
aux systèmes de satellites mobiles utilisant les mêmes
This equipment complies with IC radiation exposure limits set forth for an
canaux;
(ii)
le gain maximal
d'antenne
pourshould
les dispositifs
utilisant
les bandes de
uncontrolled
environment.
Thispermis
equipment
be installed
and operated
5250
5 350 MHz
et de20cm
5470between
à 5725 MHz
doit être&conforme
with àminimum
distance
the radiator
your body.à la limite de la p.i.
r.e;
(iii)
le gain maximal
d'antenne
permis (pour les dispositifs utilisant la bande de 5
Déclaration
d'exposition
aux radiations:
725
5 850 MHz)est
doit
être conforme
à lad'exposition
limite de laaux
p.i.r.e.
spécifiée pour
Cet àéquipement
conforme
aux limites
rayonnements
IC
l'exploitation
point
à
point
et
l'exploitation
non
point
à
point,
selon
le
cas;
établies pour un environnement non contrôlé. Cet équipement doit être
(iv) les pires angles d'inclinaison nécessaires pour rester conforme à l'exigence de
installé et utilisé avec un minimum de 20 cm de distance entre la source de
la p.i.r.e. applicable au masque d'élévation, et énoncée à la section 6.2.2 3),
rayonnement et votre corps.
doivent être clairement indiqués.
(v) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de
radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont
la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements
ISED établies pour un environnement non contrôlé. Cet équipement doit
être installé et utilisé avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Title                           : Arlo Baby Quick Start Guide
Creator                         : NETGEAR
Description                     : Arlo Baby Quick Start Guide
Subject                         : Arlo Baby Quick Start Guide, Arlo Baby, Arlo Baby Camera, Arlo Baby Camera Manual, Arlo Baby Camera Installation
Create Date                     : 2017:03:02 11:59:01-08:00
Metadata Date                   : 2017:04:13 13:07:01+08:00
Modify Date                     : 2017:04:13 13:07:01+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Instance ID                     : uuid:394ea8d5-f913-4072-b010-1777b0c38165
Original Document ID            : xmp.did:F97F11740720681180838502DEE94D73
Document ID                     : xmp.id:46f9147f-894c-0448-8514-b3d74663bb70
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:f807009d-2758-aa49-81d7-b235d20882e4
Derived From Document ID        : xmp.did:cb73dd36-544d-4d4f-a161-d5979f481249
Derived From Original Document ID: xmp.did:F97F11740720681180838502DEE94D73
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2017:03:02 11:59:01-08:00
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 12
Language                        : en-US
Author                          : NETGEAR
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PY317100371

Navigation menu