Netgear orporated DC112A AirCard Smart Cradle User Manual rev

Netgear Incorporated AirCard Smart Cradle Users Manual rev

Users Manual_rev

Quick Start
AirCard® Smart Cradle
Model DC112A
Attach the External WiFi Antennas
For the best WiFi performance, attach both antennas.
1. Align the antennas with the antenna posts on the cradle.
2. Attach the antennas on the threaded antenna posts, ensuring that the
connection is secure.
3. Adjust the antenna positions so that they point straight up.
Install the AirCard Smart Cradle
1. Place the Smart Cradle in your preferred location.
2. Connect the cradles power adapter and plug it into an electrical outlet.
The Power LED lights green within one minute. If the Power LED
does not light, press the Power On/O button on the rear panel of the
cradle.
The AirCard Smart Cradle allows you to transform your AirCard mobile
hotspot into a powerful LTE router by combining the benefits of a home
router and a Wi-Fi signal booster. It charges your mobile hotspot battery,
boosts its 4G/3G signal, extends WiFi coverage, and expands your mobile
hotspot connection to both wired and wireless devices. This cradle can also
be used as a standalone 802.11ac Dual-Band WiFi router.
Package Contents
3. Slide the antenna covers on the bottom of the mobile hotspot to the open
position.
4. Dock the mobile hotspot in the Smart Cradle.
5. Check the Smart Cradles Internet LED .
The Smart Cradle detects your mobile hotspots Internet connection, the
Internet LED lights green, and the cradle uses the mobile hotspot’s Internet
connection. The mobile hotspot must have active Internet service.
When your mobile hotspot detects that it is docked, the mobile hotspot
LCD and home page indicate that it is docked in the cradle. The mobile
hotspot uses the cradles more powerful 3G/4G antennas for better
network coverage and charges itself through the cradle. The mobile hotspot
disables its WiFi signal so that you can connect to the Smart Cradles
stronger WiFi signal.
NOTE: Some mobile hotspots require a firmware update before they
automatically disable WiFi when docked. If your mobile hotspot broadcasts its
WiFi signal when docked, manually set up your mobile hotspot to disable WiFi.
See the mobile hotspot user guide for more information.
6. On your computer or WiFi device, find and connect to the WiFi network
name on the cradle label.
Power adapter (appearance
varies by region or country)
External WiFi antennas (2)
AirCard Smart Cradle
Power On/O button
Power input
October 2014
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc. NETGEAR, the NETGEAR Logo, ReadySHARE, and AirCard, are trademarks of NETGEAR,
Inc. Information is subject to change without notice.
Log In to the AirCard Smart Cradle
You can log in to the Smart Cradle to view or change its settings.
1. Connect a computer to the cradle:
For a WiFi connection, on your computer or WiFi device, find and
connect to the WiFi network name on the cradle label.
For a wired connection, use an Ethernet cable to connect a
computer to an Ethernet LAN port on the rear panel of the cradle.
2. Launch a web browser.
3. In the address field of the browser, enter http://netgear.cradle.
A login prompt displays.
4. Enter admin for the user name and enter the password.
The default password is password.
The Home screen displays.
The AirCard Smart Cradle can also be used for:
Use the mobile hotspots Internet connection as a backup for your
regular Internet connection.
Use the cradle to extend WiFi coverage for another WiFi network.
Share a hard drive or printer using ReadySHARE USB Storage Access and
ReadySHARE Printer.
Share media using DLNA server or ReadySHARE.
Undock the Mobile Hotspot
Li the mobile hotspot from the AirCard Smart Cradle. If it is dicult to
remove, gently wiggle the mobile hotspot from side to side. When you
remove the mobile hotspot, the AirCard Smart Cradle loses its LTE Internet
connection, but it continues to work as a WiFi router. The mobile hotspot
enables its own WiFi again so you can connect to the mobile hotspot WiFi.
Front Panel LEDs
LED Description
Power • Solid amber. The cradle is booting.
Blinking amber. The firmware is upgrading, or someone
pressed the Reset button.
• Solid green. The cradle is powered on and ready.
• Blinking green. The firmware is corrupted. Contact your
Internet service provider for techncial support.
• O. Power is not supplied to the cradle.
USB • Solid green. The USB device is connected and ready.
• Solid red. A USB device is connected but unrecognized.
• O. No USB device is connected, or someone clicked the
Safely Remove Hardware button and it is safe to remove the
attached USB device.
Internet • Solid green. The Internet connection is ready.
• Solid amber. The cradle is connected to the Internet.
• O. The cradle is not connected to the Internet.
Ethernet LAN (4) • Solid. A powered-on device is connected to this port.
• O. No device is connected to this port.
2.4 GHz • Solid green. The 2.4 GHz WiFi radio is operating.
• Blinking. The cradle is in WPS mode.
• O. The WiFi radio is o.
5 GHz • Solid green. The 5 GHz WiFi radio is operating.
• Blinking. The cradle is in WPS mode.
• O. The WiFi radio is o.
Support
For information about Smart Cradle features, see the Smart Cradle user manual,
available at http://downloadcenter.netgear.com/.
Contact NETGEAR at 1 800 17 22 44 for technical support.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
To avoid potential WiFi signal interference, do not put the cradle close to
reflective or metal surfaces, such as mirrors, metal file cabinets, or stainless
steel counter tops. Do not put the cradle near electrical equipment or appliance
such as microwave ovens.
FederalCommunicationCommissionInterferenceStatement
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo
conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptany
interferencereceived,includinginterferencethatmaycauseundesiredoperation.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,
pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotection
againstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcan
radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,may
causeharmfulinterferencetoradiocommunications.However,thereisnoguaranteethat
interferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmful
interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff
andon,theuserisencouragedtotrytocorrecttheinterferencebyoneofthefollowingmeasures:
‐ Reorientorrelocatethereceivingantenna.
‐ Increasetheseparationbetweentheequipmentandreceiver.
‐ Connecttheequipmentintoanoutletonacircuitdifferentfromthat
towhichthereceiverisconnected.
‐ Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
FCCCaution:Anychangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatethisequipment.
Thistransmittermustnotbecolocatedoroperatinginconjunctionwithanyotherantennaor
transmitter.
Foroperationwithin5.15~5.25GHzfrequencyrange,itisrestrictedtoindoorenvironment.This
devicemeetsalltheotherrequirementsspecifiedinPart15E,Section15.407oftheFCCRules.
RadiationExposureStatement:
TocomplywithFCCRFExposureLimitssetforthforanuncontrolledenvironment,theproductmust
beinstalledandoperatedwithaminimumseparationdistance(betweennearbyperson(s)and
radiatingantenna)accordingtothefollowingscenarios:
1.20cmminimumwhentheproductisoperatedalonewithoutcotransmittingwithapluginmobile
hotspotdevice.
2.48cmminimumwhentheproductisoperatedwithapluginmobilehotspotdevicewhichhas
maximumoutputpowerineachcertificatelicenseband.
3.Forcotransmissionscenariowhichisnotcoveredabove,pleaseconsulttheRFtechnicianordevice
supplier.
IndustryCanadastatement:
ThisdevicecomplieswithISED’slicenceexemptRSSs.Operationissubjecttothefollowingtwo
conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptany
interferencereceived,includinginterferencethatmaycauseundesiredoperation.
LeprésentappareilestconformeauxCNRd’ISEDapplicablesauxappareilsradioexemptsdelicence.
Lexploitationestautoriséeauxdeuxconditionssuivantes:(1)ledispositifnedoitpasproduirede
brouillagepréjudiciable,et(2)cedispositifdoitacceptertoutbrouillagereçu,ycomprisunbrouillage
susceptibledeprovoquerunfonctionnementindésirable.
Caution:
(i)thedeviceforoperationintheband51505250MHzisonlyforindoorusetoreducethepotential
forharmfulinterferencetocochannelmobilesatellitesystems;
(ii)themaximumantennagainpermittedfordevicesinthebands52505350MHzand54705725
MHzshallbesuchthattheequipmentstillcomplieswiththee.i.r.p.limit;
(iii)themaximumantennagainpermittedfordevicesintheband57255850MHzshallbesuchthat
theequipmentstillcomplieswiththee.i.r.p.limitsspecifiedforpointtopointandnonpointtopoint
operationasappropriate;and
(iv)theworstcasetiltangle(s)necessarytoremaincompliantwiththee.i.r.p.elevationmask
requirementsetforthinSection6.2.2(3)shallbeclearlyindicated.
(v)Usersshouldalsobeadvisedthathighpowerradarsareallocatedasprimaryusers(i.e.priority
users)ofthebands52505350MHzand56505850MHzandthattheseradarscouldcause
interferenceand/ordamagetoLELANdevices.
Avertissement:
Leguided’utilisationdesdispositifspourréseauxlocauxdoitincluredesinstructionsprécisessurles
restrictionssusmentionnées,notamment:
(i)lesdispositifsfonctionnantdanslabande51505250MHzsontréservésuniquementpourune
utilisationàl’intérieurafinderéduirelesrisquesdebrouillagepréjudiciableauxsystèmesdesatellites
mobilesutilisantlesmêmescanaux;
(ii)legainmaximald'antennepermispourlesdispositifsutilisantlesbandesde5250à5350MHzet
de5470à5725MHzdoitêtreconformeàlalimitedelap.i.r.e;
(iii)legainmaximald'antennepermis(pourlesdispositifsutilisantlabandede5725à5850MHz)
doitêtreconformeàlalimitedelap.i.r.e.spécifiéepourl'exploitationpointàpointetl’exploitation
nonpointàpoint,selonlecas;
(iv)lespiresanglesd’inclinaisonnécessairespourresterconformeàl’exigencedelap.i.r.e.applicable
aumasqued’élévation,eténoncéeàlasection6.2.23),doiventêtreclairementindiqués.
(v)Deplus,lesutilisateursdevraientaussiêtreavisésquelesutilisateursderadarsdehautepuissance
sontdésignésutilisateursprincipaux(c.àd.,qu’ilsontlapriorité)pourlesbandes52505350MHzet
56505850MHzetquecesradarspourraientcauserdubrouillageet/oudesdommagesauxdispositifs
LANEL.
RadiationExposureStatement:
TocomplywithISEDRFExposureLimitssetforthforanuncontrolledenvironment,theproductmust
beinstalledandoperatedwithaminimumseparationdistance(betweennearbyperson(s)and
radiatingantenna)accordingtothefollowingscenarios:
1.24cmminimumwhentheproductisoperatedalonewithoutcotransmittingwithapluginmobile
hotspotdevice.
2.67cmminimumwhentheproductisoperatedwithapluginmobilehotspotdevicewhichhas
maximumoutputpowerineachcertificatelicenseband.
3.Forcotransmissionscenariowhichisnotcoveredabove,pleaseconsulttheRFtechnicianordevice
supplier.
AVERTISSEMENTDESECURITECONCERNANTLESEXPOSITIONSAUXFREQUENCESRADIO
Pouretreconformeauxlimitesd’expositionauxfrequencesradioISEDetabliespourun
environnementnoncontrole(utilisationparlegrandpublic),l’equipementdoitetreinstalleetutilise
enlaissantunedistancedeseparationdesecurite(entrelaoulespersonnespresentesdansle
perimetreetl’antenned’emission)selonlescassuivants:
1.24cmminimumlorsqueleproduitestutiliséseulsanscotransmissionavecunpluginmobile
hotspotdispositif.
2.67cmminimumlorsqueleproduitestexploiavecundispositifdepointd'accèsmobile
enfichablequiaunepuissancedesortiemaximaledanschaquebandedelicencedecertificat.
3.Dansdescasdecotransmissionnonmentionnescidessus,mercidebienvouloirconsulterun
technicienradioqualifieoudirectementlefabricantdel’appareil.
Thisradiotransmitter(IC:4054ADC112A/Model:DC112A)hasbeenapprovedbyISEDtooperate
withtheantennatypelistedbelowwithmaximumpermissiblegainindicated.Antennatypesnot
includedinthislist,havingagaingreaterthanthemaximumgainindicatedforthattype,arestrictly
prohibitedforusewiththisdevice.
Leprésentémetteurradio(IC:4054ADC112A/Model:DC112A)aétéapprouvéparISEDpour
fonctionneraveclestypesd'antenneénuméréscidessousetayantungainadmissiblemaximal.Les
typesd'antennenoninclusdanscetteliste,etdontlegainestsupérieuraugainmaximalindiqué,sont
strictementinterditspourl'exploitationdel'émetteur.
Brand Model Antenna
Gain(dBi) Frequency range Antenna
Type
Connecter
Type
Master
Wave 98619PRSX006 2.48
2.96
2400~2500 MHz
5150~5850 MHz Dipole R-SMA

Navigation menu