Netgear Wn2000Rptv3 User Guide N300 WiFi Range Extender WN2000RPT Manual

2015-03-12

• N300 WiFi Range Extender WN2000RPT
• Table of Contents
• 1. Overview
  • Unpack Your Extender
  • Front Panel LEDs and Button
  • Rear Panel Ports, Buttons, and Connector
  • When to Use Your Extender
  • How the Extender Works
• 2. Get Started
  • How to Position the Extender
  • Connect the Extender to Your WiFi Router
  • Connect the Extender with WPS to a WiFi Network
  • Access the Extender over WiFi and Use the Setup Wizard
  • Access the Extender over Ethernet and Use the Setup Wizard
• 3. Manage the Extender Network and Security Settings
  • Log In to the Extender After Initial Setup
  • Change the Password
  • Connect the Extender to a WiFi Network Without Using the NETGEAR genie Setup Wizard
  • Connect the Extender to a Hidden WiFi Network
  • Use WPS to Add a WiFi Device to the Extender’s WiFi Network
    • Use WPS with the Push Button Method
    • Use WPS with the PIN Method
  • Manage the Extender WiFi Settings
    • Configure WPA, WPA2, or WPA + WPA2
    • Configure WEP
  • Change the Extender IP Address
  • Manage Advanced WiFi Settings
  • Manage a WiFi Access List
    • Set Up and Enable the Access List
    • Disable the Access List
    • Change a Device on the Access List
    • Remove a Device from the Access List
  • Run the Setup Wizard Again After Initial Setup
  • Connect Ethernet-Enabled Devices
• 4. Maintain and Monitor the Extender
  • Back Up the Configuration Settings
    • Restore the Configuration Settings
  • Return the Extender to Its Factory Default Settings
    • Use the Factory Reset Button
    • Erase the Extender Configuration Settings
  • Upgrade the Firmware
  • View the Status and Traffic Statistics of the Extender
  • View the Wired and WiFi Network Devices
• 5. FAQs and Troubleshooting
  • FAQs
  • You Cannot Connect to the Extender
  • You Cannot Join a WiFi Network and Receive an Error Message
  • Improve the Connection Between the Extender and the WiFi Router
• A. Factory Settings and Technical Specifications
  • Factory Default Settings
  • Technical and Environmental Specifications