Netronix EL-P00105 Electronic Shelf Label Coordinator User Manual Part 2 rev

Download:
Mirror Download [FCC.gov]
Document ID	3658777
Application ID	50OgzwrR4CnM+KjEfzfJeA==
Document Description	Users Manual Part 2 rev.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	401.24kB (5015491 bits)
Date Submitted	2017-11-30 00:00:00
Date Available	2017-11-30 00:00:00
Creation Date	2017-11-29 10:31:25
Producing Software	PDFCreator 2.3.0.103
Document Lastmod	2017-11-29 10:50:43
Document Title	NxESL_UM - _E__20171121_FOR認證_ - Add Warning 20171129 for FCC-add Statement
Document Creator	PDFCreator 2.3.0.103
Document Author:	ninlin

3.2.5
Composer
1) Click composer task. Please keep running composer. Do not close the program.
Tool > Composer Task
2) Show NxESL Composer window.
30
3) Click drop down list then choose “Rebuild”.
※Due to option of "rebuild" mean only executes one time. You have to set other option in
composer program except first time use. Because of the program must running regularly
every for check the info.
4) Click “start”.
31
5) Show up the green icon mean is processing.
6) Show up the red icon mean is complete making image.
※Please maintain the program is running all the time.
3.2.6
NxEslScheduler
1) Open NxEslScheduler.exe. Do not close because the program has to continue running and
32
update info on time.
File location > LAB > NxEslScheduler.exe.
2) Please cancel tick and click run.
33
3) When you launch the execution file the MAC address will auto import in.
※If
If MAC address is not show up in the window. Please
lease reset coordinator.
4) Import data. Tool > Setting
34
5) Tick “Wake up Bit Map” and click “Database” to setting up data source.
6) Open the file that is from Nx.EXE creative document. (Refer to 3 > 3.2>
2> 3.2.1)
35
7) Click “ok”.
8) Control > Start
36
9) You will see “8 status jobs in database” that show up in the output block after you click
start. Itt is mean the program is processing. (Our sample is eight ESLs.)
10) Todo block display each ESL transfer schedule.it
schedule.it is display in update in Todo area.
Update has five mode respectively PENDING, TRANSFERRING,
TRANSFERRING, TRANSFERRED,
WAKEUP, UPDATING. Done block display already ESL was complete transfer.
transfer
37
3.3
1)
How to use barcode
arcode instruction
First
irst of all, you have to print out the barcode instruction image. Please open
NxESL.exe then click “report
report”.
Report > Export BCR CMD Image
38
2)
Save the image.
3)
Click “ok”.
39
4)
Open the image then print out.
5)
Please open composer.exe. and launch the program.
Tool > Composer Task
40
6)
Click the drop down list and setting 10 sec (suggestion option). Click “start”.
7)
Choose the barcode scanner COMI.
41
8)
After choses barcode COMI, you will hear distinct sound that mean barcode
scanner connect with the system already. (The sound is depends on the barcode
scanner company setting.)
9)
Follow way of operation of barcode. Each scan will show up on left side in
popup-window. How we use “EZ-PAIR” barcode instruction as example to pair
with three goods and three labels.
10) Scan EZ-PAIR > scan label barcode >scan good barcode >scan label barcode > scan
good barcode > scan label barcode >scan good barcode >Scan EZ-MODE-EXIT
Barcode has ten instructions. these are displayed below table：
◎Only one time or few times
42
Instruction
PAIR
Way of Operation
1. Scan label barcode.
2. Scan good barcode.
3. Scan PAIR.
REFRESH
1. Scan label barcode.
2. Scan REFRESH.
ACTIVATION
1. Scan label barcode.
2. Scan ACTIVATION.
DEACTIVATION
CANCEL
1. Scan label barcode.
2. Scan DEACTIVATION.
1. Scan label barcode.
2. Scan CANCEL.
◎Numerous labels need to update info.
Instruction
Way of Operation
1. Scan EZ-PAIR.
2. Scan label barcode.
EZ-PAIR
EZ-REFRESH
EZ-ACTIVATION
EZ-DEACTIVATION
EZ-MODE-EXIT
3. Scan good barcode.
4. Repeat 2 and 3 motion scan in sequence until finish.
5. Scan EZ-MODE-EXIT.
1. Scan EZ- REFRESH.
2. Scan need update info of labels. Until those labels was
scanned totally.
3. Scan EZ-MODE-EXIT.
1. Scan EZ-ACTIVATION.
2. Scan need launch of labels. Until those labels was scanned
totally.
3. Scan EZ-MODE-EXIT.
1. Scan EZ-DEACTIVATION。
2. Scan need stop using of labels. Until those labels was
scanned totally.
3. Scan EZ-MODE-EXIT.
1. Each time the end of launch EZ mode after
sca“EZ-MODE-EXIT” instruction.
43
11) Running NxEslScheduler (refer to 3 >3.2 >3.2.6 NxEslScheduler)
3.4
Other
3.4.1
Import data of goods
OptionⅠUsing import
When you need to add lots of goods or update goods information you could use “import” to
add or update.
Import > Article > open information of article> Open > chose “Insert and keep old records” >
Import Data.
44
OptionⅡ Manual
Edit > Article > Add New Article
45
Show up empty column.
You can right-click on empty column. There will show up option then select “input” and fill
in information of goods. You also can right-click to fix goods information.
46
3.4.2
Importing data of label
Only use import function can add data of labels.
Edit > Labels > File path to open
Click “Import Data”.
47
3.4.3
Design template
Template interface
Click Tool > Template Designer
Please cancel tick and click run.
48
You will see NxTemplate.exe.
Edit new template.
Please click “file” than choses “new”. You will see the image below:
49
Menu bar function is below：
：
Function
File
Edit
Tools
Help
Item
Content
New
Open new template
Save
Save template
Save as
Save as other template
Exit
Exit the program
Undo
Back to previous step
Redo
Recovery
Delete
delete
Too Upper Layer
Move to upper layer
Too Lower Layer
Move to next layer
Render Template
Preview template
Settings
Chose other database
View Help
Help
About
About
Image editor bar function description is from left to right：
right
icon
item
Text
horizontal
line
straight
line
Select
Content
Insert fixed word or icon. The word or icon are in every ESL content
same. Such as unit, special offer, $, ¥, €…etc.
Insert horizontal line. You can adjust some of detail in detail palette.
palette
Such as height, width, color and place.
Insert straight line.
line You can adjust some of detail in detail palette.
palette Such
as height,
height width, color and place. Itt is height limited to 100.
100
Insert flexible word. The word is ESL content vary with the goods.
Such as good name, price, good description…etc.
image
Insert image. You can adjust some of detail in detail palette.
palette Such as
height,, width, color, place and selecting image.
block
Insert block.
blo You can adjust some of detail in detail palette.
palette Such as
height,, width, color and place.
barcode
Insert barcode. Depends on your need. To select barcode source and
digital in detail palette.
Design new template
This package
ackage has two kind of size of ESL. When you add new template you must to adjust
size for real requirement. Soo you can adjust height and width in property as figure below.
50
【Select】
First, to click “select” then adjust detail about the word. You also can use mouse to move.
51
Click drop down list of data source in detail palette. The source is depends on what is your
requirement. The source will read from database and display in template. Example is use
name as data source.
52
Click “select” again. To adjust detail that is about the data source. There will display “price”.
To adjust name of Element Name to become with price then name of Label Element is also
change.
53
【Text】
To click icon of text then it will display in art board. In art board to adjust name of text
become with money icon. The name of text of art board is change from name of text in detail
palette.
54
To adjust name of Element Name become with unit then name of Label Element is also
change.
【Block】
To click icon of block then it will display in art board. Depends on what is your requirement
then adjust the detail in detail palette. You can adjust color, background color and size. Please
to attention the color, when you set color that must same as color of ESL. Because of ESL has
two kind of color mode. One has black, white and red. The other one only has black and
white.
55
【Line- horizontal】
To click icon of horizontal line then it will display in art board. In detail palette, to change
detail the horizontal line. You can adjust color, width, height and place.
56
Click icon of image then it will display in art board. Select source of picture in detail palette.
Choose picture then open it.
※If the ESL color only has black and white, you only can use black and white in design
template.
57
Adjust height and width of image.
58
Use mouse to moving the image.
【Barcode】
Click icon of barcode then it is displayed in art board. You can adjust the barcode source and
digital. In the example below that is barcode as source.
You do must to adjust the left or right. There are more than the 3 unit at least. Due to adjust,
the image will able to read with barcode scanner.
The digital is following with International Barcodes rule to setting.
59
【Move layer】
If the layer is lower, the location is high in the label element area. Such as the frame is lowest
layer so it is highest in the label element area.
So we have to move the black block under the red color block.
You click the black rectangle then click "to lower layer" option. Until the black block is under
red block. (Edit > to lower layer)
60
Or you can click red block then click “to upper layer”. Until the red block cover the black
block. (Edit > to upper layer)
The black block is under the red block.
61
【Delete layer】
Click the image you want to delete. In sample that will delete black block. First of all, click
black block. Second, click edit then click delete. (Edit > Delete)
62
Click “yes”. The black block is disappearing.
【Preview / Save image】
When you done your template. You should use “render template” to preview the template.
Because of ESL is EPD panel. You have to check how the template is in real ESL.
Tool > Render Template
63
The preview template will show in image area.
64
If you make sure the template is you want then you could save it. (File > Save as)
If you want to modify the template, you could directly modify it. After modify, you have to
use “render template” again to preview the template.
After you click “save as”, you have to write some of description and template name in
popup-window. After you are fill in information than click “ok”.
65
3.4.4
Scheduler interface
66
Scheduler has four areas. They are display different task. Show is below：
Coordinator：When you launch the NxScheduler.exe, the MAC address will auto bring in
and display in coordinator area.
Todo：Display each ESL status of transfer. There are respectively pending, transferring,
transferred, wakeup, updating.
Done：Display already done ESL.
Output： Display whether read information from program of composer and display the
process of execution. If there are show “status job in database” that is mean the database
already read by NxScheduler.exe.
67
4
Q&A
Q：If
If the ESL panel is broken or the image is incomplete,
incomplete how can I do?
A：First
First of all you have to check the template and ESL size are match or not? If there are not
match. Please re-select a template to fit with the ESL size.
If there both are match. Please to
launch program of composer again. Second, you can check the program of
NxEslscheduler.exe is working or not? Please
lease contact us as soon as possible.
possible
Q：How can I do when LED of coordinator is light off?
A：Please
lease to check which LED is light off. If the LAN-link indicator is light off, you should
try again to plug the network line or change new network line. If the LAN-ACT
LAN
indicator is
light out, you should check your router is working or not first. Because of the indicator is
present work or not work between router and coordinator. If the power indicator is light out,
you should change the adapter.
Q：How
How to calculate distance between coordinator and ESL?
A：Make sure coordinator is not in office but in store. It is out in the open (even if it is ugly)
and in the center of the store if possible, free from obstructions. Don't hide it on the floor or
behind pillar. Take coordinator as the center radius of 25 meters.
meters
Q：How can I do when MAC address does not show up
p in the coordinator block during
launch Nxscheduler.exe?
A：If MAC address does not show up normally, insert a paper clip or a SIM-eject
SIM
tool to the
reset hole of coordinator,, press and hold the reset button for 2 seconds to reset the
coordinator.
Q：How can I do when barcode scanner is not working normally?
A：Please
Please to check power of barcode scanner is enough or not, first? Second, whether
computer is connect with barcode scanner? Then to check program of composer and barcode
68
scanner was connected or not.
Q：How
How to print good barcode?
A：Edit > Article > select goods to printing > left-click > Export Article BCR Image
Q：How
How to print label barcode?
A：Edit > Labels > select labels to printing > left-click > Export Labels BCR Image
Q：How
How to print template barcode?
barco
A：Edit > Labels > select template to printing>
printing left-click > Export Labels BCR Image
(Template)
how to make sure battery of ESL？
ESL
Q：how
A：Please reset ESL. The power will show up in the ESL content. Battery value is in figure
below.
69
5
Appendix
5.1
Notice for cleaning and Safety
Clean
Screen – Please use lint free cloth to wipe ESL. Don't use water, chemical solvents and
spray.
Cover case – Use lint free cloth to wipe cover case.
Safety tips
Please do not change battery of ESL by yourself.
Avoid dangerous, do not open cover case by yourself.
Do not insert your fingers or any other object into the gap of case.
Do not use wet rag to wipe the ESL in case of the spray or water leaks into the ESL. If
you accidentally leak water into the ESL, you must connect with us and don't attempt to
repair the ESL or turn power on by yourself.
Please obey user manual rule when operating ESL. If the temperature is out of ESL limit
of temperature, please do not use it.
Avoid shaking or dropping the ESL and coordinator.
Avoid contact with sand or dust.
When ESL or coordinator are using, do not near the area of strong magnetic field.
Instructional safeguard
Warning
Do not ingest battery, Chemical Burn Hazard.
This product contains a coin / button cell battery. If the coin / button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it
away from children.
If you think batteries might have been swallowed or placed inside any part of the body,
seek immediate medical attention.
70
5.2
Certification mark
BSMI-D43021
Coordinator
CE
Coordinator
2.9” ESL P29205
2.9” ESL P29215
P292
FCC
Coordinator
2.9” ESL P29205
2.9” ESL P29215
FCC ID : NOIEL-P00105
FCC ID : NOIEL-P29215
FCC ID : NOIEL-P29215
NCC
Coordinator
2.9” ESL P29205
2.9” ESL P29215
71
Federal Communication Commission Interference
Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
72
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
73

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : PDFCreator 2.3.0.103
Keywords                        : 
Modify Date                     : 2017:11:29 10:50:43+08:00
Create Date                     : 2017:11:29 10:31:25+08:00
Creator Tool                    : PDFCreator 2.3.0.103
Metadata Date                   : 2017:11:29 10:50:43+08:00
Document ID                     : uuid:e5214a7a-d708-11e7-0000-7743ff8c3d5e
Instance ID                     : uuid:22e31cf4-1114-41b2-94c5-55ba836f18c7
Format                          : application/pdf
Title                           : NxESL_UM - _E__20171121_FOR認證_ - Add Warning 20171129 for FCC-add Statement
Creator                         : ninlin
Description                     : 
Has XFA                         : No
Page Count                      : 44
Page Layout                     : SinglePage
Subject                         : 
Author                          : ninlin

EXIF Metadata provided by EXIF.tools