Netvue Technologies NI-3221 Orb Cam User Manual

Netvue Technologies Co., Ltd. Orb Cam Users Manual

Users manual

Quick Start Guide
Orb Cam  X1Screw Accessories *1Mounting Bracket *1 Location *1Power Adapter *1BottomPower inputTF cardResetSupport holeMore About Orb CamLight SensorNight Vision LightsLensIndicator LightSpeakerMicrophoneSidePacking List
Scan Qr code to downloadnetvue appA.Flash slowly:Connecting server.B.Solid green:Connected serverC.Flash rapidly:WiFi configuration modeLED Indicator StatusGreenDownload Netvue App Power On Device
1.Open the APP,register an account and log in. 2.After logging in,click“+”sign,and chooseNetvue Orb Cam.Open the app Register account Add device Choose Netvue Ord CamAdd Device
3.Configure WiFi step by step.Connect power Enter password Scan Qr code
4.Device added successfully.Return to app   home page,your device should appear in    the list of device.Device added  Device list1. Use a valid email address to register your     account.2.  Keep the device in a 2.4G WiFi environ     ment with good signal.3. After connecting to power, the device will     make a “Di” sound for 3 seconds.     Afterwards press the reset button, the     indicator light will then flash rapidly.4. Strong lights may interfere with the ability     for the device to read the QR code.5. After connecting to the router, the device     will make a “ding dong” sound effect. After     connecting to the server successfully, it will     play a cheerful chime; if it fails, it will play a     sad sound effect.6. If the server fails to connect, you may      scan the device ID to connect the device.Notes
App FeaturesCongratulations !You have completed install-tion of your camera,you can watch your home anywhere and anytime。
Caution1. The device should be kept in open areas and be away from metal. Avoid placing behind furni-ture or near microwaves. Keep away from areas with lots of cables if possible. Try to keep your device within range of your Wi-Fi signal.2. If you want to move the device to a new Wi-Fi environment, reconfigure the Wi-Fi settings by following the instruction on the app.
WarningThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:· Reorient or relocate the receiving antenna.· Increase the separation between the    equipment and receiver.· Connect the equipment into an outlet on a    circuit different from that to which the    receiver is connected.· Consult the dealer or an experienced radio/TV    technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2AO8RNI-3221
Manufacturer's Name: NetVue Technologies Co. Ltd.Importer:Cédrus Számítástechnikai Kft. Netvue Orb CamModel number: Netvue Orb CamOperating Temperature: -20° C to 50° CThis device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.1. Caution : risk of explosion if battery is replaced      by an incorrect type.dispose of used batteries      according to the instructions. 2. Adapter shall be installed near the equipment      and shall be easily accessible. 3. The plug considered as disconnect device of      adapter.4. The device complies with RF specifica       tions when the device used at 20cm form      your body.This product can be used across EU member states.FunctionWiFi 802.11B/G/N(HT20,HT40)2.4G.   802.11b/g/n(20MHz):2412~2472MHz;802.11n(40MHz):2422~2462MHz;Operation FrequencyMax RF outputpower13.9dBm. 20dBm.Limit

Navigation menu