Nextivity orporated CELFI-RS224WU Cel-Fi Residential System User Manual

Nextivity Incorporated Cel-Fi Residential System

Contents

User Manual 2

Cel-Fi with IntelliBoost
Nextivity Incorporated
Headquarters:
12230 World Trade Drive
Suite 250
San Diego, CA 92128, USA
http://www.nextivityinc.com
Bureau in Europe:
Whitehill Way
Swindon, UK
SN5 6QR
Cel-Fi with IntelliBoost
Nextivity Incorporated
Headquarters:
12230 World Trade Drive
Suite 250
San Diego, CA 92128, USA
http://www.nextivityinc.com
Bureau in Europe:
Whitehill Way
Swindon, UK
SN5 6QR
STOP!!!
Do not call your carrier until you have read the Quick Start Guide.
If you need more help, try visiting http://www.celfihelp.com
Safety Precautions
Install Cel-Fi indoors. It should not be used outdoors.
These products are designed to be used with a direct plug-in power
supply unit meeting SELV and “Limited Power Source” (NEC/CEC Class
2) requirements rated 12 Vdc, 1.66 A. When installing the equipment, all
the requirements of the manufacturer and the referenced standards must
be met.
There are no user serviceable parts inside.
CAUTION: Changes or modifications to this product not expressly
approved by Nextivity may void your right to operate the equipment.
Declaration of Conformity
STOP!!!
Do not call your carrier until you have read the Quick Start Guide.
If you need more help, try visiting http://www.celfihelp.com
Safety Precautions
Install Cel-Fi indoors. It should not be used outdoors.
These products are designed to be used with a direct plug-in power
supply unit meeting SELV and “Limited Power Source” (NEC/CEC Class
2) requirements rated 12 Vdc, 1.66 A. When installing the equipment, all
the requirements of the manufacturer and the referenced standards must
be met.
There are no user serviceable parts inside.
CAUTION: Changes or modifications to this product not expressly
approved by Nextivity may void your right to operate the equipment.
Declaration of Conformity
We, Nextivity, Incorporated, 12230 World Trade Drive Suite 250, San Diego, CA 92128, USA
declare under our sole responsibility that the product(s):
Product Description: Cel-Fi Residential (CELFI-RS2)
Models: CELFI-RS218WU and CELFI-RS218CU, CELFI-RS225WU and CELFI-RS225CU, CELFI-
RS224WU and CELFI-RS224CU
to which this declaration relate(s) is(are) in conformance with the provisions of Directive 1999/5/EC
governing Radio Equipment and Telecommunications Terminal Equipment and the Mutual
Recognition of their Conformity using the following standards:
SAFETY (art 3.1.a): EN 60950:2006 /A11:2009 /A1:2010
EMC: (art 3.1.b): EN 301 489-1 v1.8.1, EN 301 489-23 v1.4.1, EN 301 489-17 v2.1.1, EN 62311:2008
RADIO SPECTRUM (art 3.2): EN 301 908-1 v4.2.1, EN 301 908-11 v4.2.1, EN 301 893 v1.5.1
___________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________
(Place/Date of issue) (name and signature or equivalent marking of authorized person)
Limited Warranty; Warranties
This Cel-Fi (Product) is distributed by your mobile carrier, and depending on their terms and conditions of sale, you may or may not have
additional rights under a warranty program for Cel-Fi. This does not affect your statutory rights.
All Products must be stored, carried, processed, installed or otherwise handled or dealt with by End User and its agents in accordance with
Nextivity’s published instructions, and in accordance with normal safety procedures for the handling of Products, and Nextivity shall not be
liable for any loss, damage, injury or expense arising out of the Products or their condition if this is not done. Nextivity shall not be liable to
replace any Products rejected only on the grounds of immaterial imperfections or variations in the manufacturing process.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WITH RESPECT TO THE PRODUCTS AND ANY DOCUMENTATION OR OTHER
MATERIALS PROVIDED BY NEXTIVITY, EITHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE, AND NONINFRINGEMENT, ALL OF WHICH ARE HEREBY DISCLAIMED. WITHOUT LIMITING THE
FOREGOING, NEXTIVITY. DOES NOT WARRANT THAT THE HARDWARE WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS,
NO PERSON IS AUTHORIZED TO REPRESENT, PROMISE OR ASSUME ANY OBLIGATION OR LIABILITY CONTRARY OR IN ADDITION TO THIS
WARRANTY.
Limitation of Liability
In no event shall Nextivity, nor its directors, employees, agents, suppliers or End Users, be liable under contract, tort, strict
liability, negligence or any other legal or equitable theory with respect to the Products or any other subject matter of this
Agreement (i) for any lost profits, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or
consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually
received by Nextivity from End User with respect to the Products actually purchased and paid for.
Intellectual Property
End User agrees not to copy any product or process of Nextivity, or any part thereof, except with the express, prior written consent of
Nextivity, given in its sole discretion. All risks of direct or indirect patent infringement are assumed by the End User. Nothing shall be
construed as recommendation to make, use, or sell any Product or process in conflict with existing or future patents. End User shall not (and
End User shall not permit anyone else to): (i) in any way reverse engineer or otherwise attempt to derive any source code or underlying
ideas or algorithms from any part of the Products, except to the limited extent applicable laws specifically prohibit such restriction, (ii) modify,
translate, or otherwise create derivative works of any part of the Products, or (iii) copy, rent, lease, distribute, or otherwise transfer any of the
rights that End User receives hereunder. End User shall abide by all applicable local, state, national and international laws and regulations.
Miscellaneous
Cel-Fi, IntelliBoost, and Nextivity logo are trademarks of Nextivity, Inc.
Copyright © 2013 by Nextivity, Inc. U.S. Patent 7,519,323, 8,086,174, 8.081,585 and other Patents Pending.
All Rights Reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with prior
written permission of Nextivity.
EU Statements
For model CELFI-RS218WU and CELFI-RS218CU:
Italy
I. d.1.vo 1.8.2003, n.259, Article 104 (activities subject to autorizzione general) and 105 (free use), for private use:
II. dM 28.5.03 and subsequent amendments, for the provision of public access to networks and telecommunications services.
III. Ministerial Decree July 12, 2007. IV.
FCC and Industry Canada Statements
For models CELFI-RS225WU and CELFI-RS225CU, CELFI-RS224WU and CELFI-RS224CU:
i) The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite
systems.
ii) The maximum antenna gain permitted for devices in the bands 5250-5350 and 5470-5725 MHz shall comply with the e.i.r.p. limit; and
iii) The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-
point and non point-to-point operation as appropriate.
High power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars
could cause interference and/or damage to LE-LAN devices.
The device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation of the device.
To comply with RF exposure requirements the antenna shall be installed to ensure a minimum separation distance of 20 cm from persons.
The antenna may not be co-located or operated in conjunction with other transmitting devices.
i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques
de brouillage préjudiciables aux systèmes de satellites mobiles utilisant les canaux adjacents.
ii) Le gain d'antenne maximal autorisé pour les appareils dans les bandes 5250-5350 MHz et 5470-5725 doit se conformer à la
puissance isotrope rayonnée équivalente (p.i.r.e.) limite, et
iii) Le gain d'antenne maximal autorisé pour les appareils dans la bande 5725-5825 MHz doit être conforme aux limites p.i.r.e specifies pour
le fonctionnement point à point et le cas échéant non point à point.
Les radars de haute puissance sont désignés comme utilisateurs principaux (c.-à-d., qu'ils sont prioritaires) pour les bandes 5250-5350 MHz
et 5650-5850 MHz et ces radars peuvent causer des brouillages et/ou des dommages aux dispositifs LAN-EL.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Pour se conformer aux exigences d'exposition aux RF de l'antenne doit être installée afin d'assurer une distance minimale de 20 cm de
personnes. L'antenne peut pas être co-implantés ou exploités en conjonction avec d'autres appareils de transmission.
Limited Warranty; Warranties
This Cel-Fi (Product) is distributed by your mobile carrier, and depending on their terms and conditions of sale, you may or may not have
additional rights under a warranty program for Cel-Fi. This does not affect your statutory rights.
All Products must be stored, carried, processed, installed or otherwise handled or dealt with by End User and its agents in accordance with
Nextivity’s published instructions, and in accordance with normal safety procedures for the handling of Products, and Nextivity shall not be
liable for any loss, damage, injury or expense arising out of the Products or their condition if this is not done. Nextivity shall not be liable to
replace any Products rejected only on the grounds of immaterial imperfections or variations in the manufacturing process.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WITH RESPECT TO THE PRODUCTS AND ANY DOCUMENTATION OR OTHER
MATERIALS PROVIDED BY NEXTIVITY, EITHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE, AND NONINFRINGEMENT, ALL OF WHICH ARE HEREBY DISCLAIMED. WITHOUT LIMITING THE
FOREGOING, NEXTIVITY. DOES NOT WARRANT THAT THE HARDWARE WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS,
NO PERSON IS AUTHORIZED TO REPRESENT, PROMISE OR ASSUME ANY OBLIGATION OR LIABILITY CONTRARY OR IN ADDITION TO THIS
WARRANTY.
Limitation of Liability
In no event shall Nextivity, nor its directors, employees, agents, suppliers or End Users, be liable under contract, tort, strict
liability, negligence or any other legal or equitable theory with respect to the Products or any other subject matter of this
Agreement (i) for any lost profits, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or
consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually
received by Nextivity from End User with respect to the Products actually purchased and paid for.
Intellectual Property
End User agrees not to copy any product or process of Nextivity, or any part thereof, except with the express, prior written consent of
Nextivity, given in its sole discretion. All risks of direct or indirect patent infringement are assumed by the End User. Nothing shall be
construed as recommendation to make, use, or sell any Product or process in conflict with existing or future patents. End User shall not (and
End User shall not permit anyone else to): (i) in any way reverse engineer or otherwise attempt to derive any source code or underlying
ideas or algorithms from any part of the Products, except to the limited extent applicable laws specifically prohibit such restriction, (ii) modify,
translate, or otherwise create derivative works of any part of the Products, or (iii) copy, rent, lease, distribute, or otherwise transfer any of the
rights that End User receives hereunder. End User shall abide by all applicable local, state, national and international laws and regulations.
Miscellaneous
Cel-Fi, IntelliBoost, and Nextivity logo are trademarks of Nextivity, Inc.
Copyright © 2013 by Nextivity, Inc. U.S. Patent 7,519,323, 8,086,174, 8.081,585 and other Patents Pending.
All Rights Reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with prior
written permission of Nextivity.
EU Statements
For model CELFI-RS218WU and CELFI-RS218CU:
Italy
I. d.1.vo 1.8.2003, n.259, Article 104 (activities subject to autorizzione general) and 105 (free use), for private use:
II. dM 28.5.03 and subsequent amendments, for the provision of public access to networks and telecommunications services.
III. Ministerial Decree July 12, 2007. IV.
FCC and Industry Canada Statements
For models CELFI-RS225WU and CELFI-RS225CU, CELFI-RS224WU and CELFI-RS224CU:
i) The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite
systems.
ii) The maximum antenna gain permitted for devices in the bands 5250-5350 and 5470-5725 MHz shall comply with the e.i.r.p. limit; and
iii) The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-
point and non point-to-point operation as appropriate.
High power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars
could cause interference and/or damage to LE-LAN devices.
The device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation of the device.
To comply with RF exposure requirements the antenna shall be installed to ensure a minimum separation distance of 20 cm from persons.
The antenna may not be co-located or operated in conjunction with other transmitting devices.
i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques
de brouillage préjudiciables aux systèmes de satellites mobiles utilisant les canaux adjacents.
ii) Le gain d'antenne maximal autorisé pour les appareils dans les bandes 5250-5350 MHz et 5470-5725 doit se conformer à la
puissance isotrope rayonnée équivalente (p.i.r.e.) limite, et
iii) Le gain d'antenne maximal autorisé pour les appareils dans la bande 5725-5825 MHz doit être conforme aux limites p.i.r.e specifies pour
le fonctionnement point à point et le cas échéant non point à point.
Les radars de haute puissance sont désignés comme utilisateurs principaux (c.-à-d., qu'ils sont prioritaires) pour les bandes 5250-5350 MHz
et 5650-5850 MHz et ces radars peuvent causer des brouillages et/ou des dommages aux dispositifs LAN-EL.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Pour se conformer aux exigences d'exposition aux RF de l'antenne doit être installée afin d'assurer une distance minimale de 20 cm de
personnes. L'antenne peut pas être co-implantés ou exploités en conjonction avec d'autres appareils de transmission.
Legal_RS2.2_English_12-1114
Legal_RS2.2_English_12-1114

Navigation menu