Nextlink to A S 105 INVISIO Q7 Bluetooth headset/earpiece User Manual Users manual
Nextlink.to A/S INVISIO Q7 Bluetooth headset/earpiece Users manual
Users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 862739 |
| Application ID | HxjDpVbU173SVUZbpuqTYQ== |
| Document Description | Users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 46.16kB (576967 bits) |
| Date Submitted | 2007-11-01 00:00:00 |
| Date Available | 2007-11-01 00:00:00 |
| Creation Date | 2007-09-11 10:41:35 |
| Producing Software | Adobe PDF Library 7.0 |
| Document Lastmod | 2007-09-11 10:42:05 |
| Document Title | Users manual |
| Document Creator | Adobe InDesign CS2 (4.0.5) |
User Manual Please read this User Manual carefully before you start using your headset. USER MANUAL In the following languages ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . SPANISH . . . . . . . . . . . . . . . . . . . . . . . . 21 Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Passkey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Low Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Bone Conductive Microphone . . . . . . . . . . . . . . . . . . 6 Soft Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Wearing Your INVISIO® Q7 . . . . . . . . . . . . . . . . . . . 9 Turning On the INVISIO® Q7 . . . . . . . . . . . . . . . . . . 9 Pairing with a Bluetooth® Device . . . . . . . . . . . . . . . 10 Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . 10 Answering Calls/Hangup/Reject a Call . . . . . . . . . . . . 10 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . 11 Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Conference Call . . . . . . . . . . . . . . . . . . . . . . . . 12 Transferring and Ending a Call . . . . . . . . . . . . . . . . 13 Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Transferring a Call to a Mobile Phone . . . . . . . . . . . . . 13 Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 RF Emissions Information . . . . . . . . . . . . . . . . . . . 16 Limited 1-Year Warranty . . . . . . . . . . . . . . . . . . . . 18 Thank you for purchasing the INVISIO® Q7. The INVISIO® Q7 can communicate with a wide range of Bluetooth® devices, such as mobile phones, PDAs and computers, using two profiles: ● Bluetooth® HEADSET ● Bluetooth® HANDS-FREE Note: Check your device’s user manual for information about supported Bluetooth® features and functions. Features ● Patented Bone Conductive Microphone ● Patented Soft Spring system for use in either ear ● 3-button user interface Passkey Bluetooth® devices recognize each other by pairing. Each Bluetooth® device uses a pairing code, called a passkey. The passkey for the INVISIO® Q7 is: 0000 Quick Start Charging Your INVISIO® Q7 Charge the INVISIO® Q7 for 8 hours before first use. Connect the INVISIO® Q7 to a wall outlet using the A/C adapter. The red light on the INVISIO® Q7 indicates charging. When charged, the light turns off. WARNING! Only use the supplied charging unit(s). If other power supplies are used, the INVISIO® Q7 or battery can be damaged, and NEXTLINK A/S cannot be held responsible. Low battery When the INVISIO® Q7 needs charging, the red light flashes instead of the green light. A beep sequence of 5 beeps every 15 seconds will be heard when wearing the headset. Bone Conductive Microphone Your INVISIO® Q7 uses the patented Bone Conductive Microphone technology that captures vibration in the user´s jawbone and converts it to sound. Because speech is not passed through air, ambient noise is effectively eliminated. Combined with Digital Signal Processing for echo and noise cancellation, the INVISIO® Q7 is the ultimate headset in noisy environments. Bone Conductive Microphone Soft Springs The INVISIO® Q7 comes with 2 Soft Springs - ear fixtures made by soft rubber - ready to use. One is for left ear and the other one for right ear wearing style. Left ear Right ear Wearing Your INVISIO® Q7 Use your index finger to bend the Soft Spring, and insert the headset in your ear. For best audio quality, place the headset and phone on the same side of your body or within line of sight. Place the Soft Spring in the upper bend of your ear. It is essential to the sound, how a headset with Bone Conduction Microphone sits in the ear, meaning the small balloon-shaped microphone needs to be in touch with the ear canal, otherwise no sound will be transmitted. Note: IMPORTANT! DO NOT apply pressure/or squeeze the small rubber balloon with your fingers, as it can damage the parts inside. Turning ON/OFF To turn on the headset, press the TALK button until the green light flashes five times followed by two tones. When turned on, the headset automatically connects to the most recent connected device. TALK To turn off the headset, press the TALK button until the red light flashes five times followed by two tones. Note: Audio tones can be heard only when wearing the headset. Pairing with a Bluetooth® Device The INVISIO® Q7 can pair with up to eight devices. If you try to pair the headset with more than eight devices, the device used least recently will be deleted. To pair the headset with a device (in OFF state): 1. Hold down the TALK button until the red and green lights flash repeatedly. Note: The headset is in pairing mode for 5 minutes. The first time the INVISIO® Q7 is turned on it will automatically enter into pairing mode. 2. Use your device’s Bluetooth® menu to search for the headset. When found, “INVISIO® Q7” appears in the device’s list. 3. If the device requests a passkey, enter 0000. To pair the headset with a device (in ON state): 1. Hold VOLUME UP + VOLUME DOWN until the red and green light are flashing. Then follow step 2 and 3 as above Making a Call When the headset is connected, dial or operate the phone accordingly to place the call. Answering Calls/Hangup/Reject a call The headset sounds an alert for incoming calls. To answer the call, press the TALK button. To hang up, press the TALK button again. To reject a call, hold down the TALK button for 3 seconds. Note: Audio tones can be heard only when wearing the headset. Operation Adjusting the Volume Use the VOLUME UP and VOLUME DOWN buttons to adjust the volume. Each adjustment is followed by a tone. When the minimum or maximum level has been reached, a different beep can be heard. VOLUME DOWN VOLUME UP 10 Note: The INVISIO® Q7 saves the last used volume settings when turned off. Mute To mute the headset microphone, press VOLUME UP + VOLUME DOWN at the same time for 3 seconds. To unmute, press both buttons again for about 3 seconds. While muted, the headset beeps twice every 10 seconds. Note: Audio tones can be heard only when wearing the headset. Call Waiting To answer a second call, press the TALK button for 1 second. The headset places the active call on hold and answers the new call. To switch back, press TALK again for 1 second. Note: Call waiting must be supported by your phone and service provider. 11 Conference Call To connect the “on hold” call to the conference call, press and hold the VOLUME UP button for 1 second, or until the headset beeps. Note: Conference call must be supported by your phone and service provider. Transferring and Ending a Call To transfer the second call to the “on-hold” call as well as disconnect yourself from the conversation, press and hold the VOLUME DOWN button for 1 second, or until the headset beeps. Note: The service must be supported by your phone and service provider. Redialing To redial the last called number, hold the VOLUME DOWN button for approximately 1 second. The headset connects to the phone and requests a redial. 12 Note: The functionallity needs to be supported by your phone. Transferring a Call to a Mobile Phone To transfer a call from the headset to or from a mobile phone, press twice on the TALK button in order to transfer the audio to a mobile phone or from the mobile phone to the headset. Voice Dialing The INVISIO® Q7 supports voice dialing. Refer to your phone’s owner’s manual to set up voice dialing. To use voice dialing, press the TALK button and then complete your phone’s voice-dial procedure. To cancel a voice dial, press the TALK button again. Cautions Important safety information. Read this information before using your INVISIO® Q7. ● Do not expose the device to direct sunlight or extremely high or low temperatures for prolonged periods of time. ● Do not expose the device to open flames, liquid or 13 moisture, etc. ● Do not drop, hit, throw or try to bend the INVISIO® Q7. Rough treatment could damage it. ● Swallowing the headset could be fatal, keep it away from children. Users are not permitted to change or modify this device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. See 47 CFR See, 15.21. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec.15.19(3). Hospitals or health-care facilities may use equipment that is sensitive to external RF energy. To avoid interference and/or compatibility conflicts, turn off your headset when instructed to by posted notices. 14 Onboard aircraft, turn off your headset as instructed and use the headset in accordance with applicable regulations and airline crew instructions. If you experience interference with a hearing aid or other personal medical device, consult with that device’s manufacturer to discuss alternatives. Your physician may be able to assist you in obtaining this information. People with pacemakers should follow these precautions: ● The Health Industry Manufacturers Association recommends a minimum separation of 15 centimeters (Approx. 6 inches) between a handheld wireless device and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of, Wireless Technology Research. ● DO NOT carry the phone or Bluetooth® headset in your breast pocket. ● TURN OFF the phone and headset immediately if you suspect interference. 15 RF Emissions Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and reciever. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 16 Consult an experienced technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes or modifications not expressly approved by NEXTLINK A/S may cause interference and void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device mustaccept any interference received, including interference that may cause undesired operation. Limited 1-Year Warranty NEXTLINK A/S warrants that this product is free from defects in design, material and workmanship that can result in malfunction of the product during normal use. The warranty period is one (1) year from the purchase date of the product by the end consumer. 1. The warranty is only valid under the following terms and conditions: The warranty applies to the consumer on the original receipt from the dealer and cannot be transferred or re-assigned to another consumer. 17 2. When returning the product for repair or replacement, attach a failure description and in the proper packaging. 3. During the warranty period, the product can either be repaired or replaced, and this will be based on the judgement of personnel authorized by NEXTLINK A/S. After replacement or repair, the product is warranted for the remaining time of the original warranty period. This warranty does not cover defects due to: 1. Adjustments, modifications, disassembly or any alteration of the product done by personnel not authorized by NEXTLINK A/S. 2. Accidents, exposure to liquids and food, moisture, extreme high or low temperatures or environmental conditions, forces of nature etc. 3. Variations in functionality when used with other devices, radio interference and radio networks, radio range, software update of the product needed due to changes or functionality of other products like mobile phones, computers etc. 4. Misuse of the product e.g. wrongful installation, breaking covers and casing by using force, etc. 18 5. Conditions due to normal wear and tear when using the product e.g. rechargeable batteries have a limited lifespan and performance is gradually reduced over time. Soft Springs broken after extensive use. There are no expressed warranties neither written nor oral other than this warranty. In no event shall NEXTLINK A/S or its vendors be liable for incidental or consequential damages of any nature whatsoever, including but not limited to commercial losses, Force Majeure or special contracts/ deals. Please check the user’s guide for information and regulations about electronic operation of the product. This warranty does not affect the consumer’s legal rights due to national legislation in force. If warranty service is needed, please contact your dealer for further information. All shipping costs for products covered by this warranty will be divided equally between manufacturer and sender. 19 The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by NEXTLINK A/S is under license. Other trademarks and trade names are those of their respective owners. Please visit our website for further information. www.nextlink.se Soft Spring system and Bone Conductive Microphone technology are patents of NEXTLINK A/S. NEXTLINK A/S reserves the right without notice to make changes to specifications for existing products and to discontinue existing products. If NEXTLINK A/S markets new products to replace or supplement existing products, such new products shall be entered into agreement for. 20 © 2007 NEXTLINK A/S. All rights reserved. Bluetooth is a registered trademark of Bluetooth SIG Inc., and is used under license by NEXTLINK A/S. NEXTLINK A/S reserves the right without notice to make changes to specifications for existing products and to discontinue existing products. If NEXTLINK A/S markets new products to replace or supplement existing products, such new products shall be entered into agreement for. The Soft Spring system and Bone Conductive Microphone technology are patents of NEXTLINK A/S. Check with local authorities regarding the use of headset while driving. Made in Denmark. 08.2007-1.0 www.invisioheadsets.com 21
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes Page Mode : UseThumbs XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Instance ID : uuid:d1c61c23-0391-44fe-a5a3-f0163c551fdb Document ID : adobe:docid:indd:eab44c5b-2a1d-11dc-b7a3-d0be08a6c236 Rendition Class : proof:pdf Derived From Instance ID : eab44c5a-2a1d-11dc-b7a3-d0be08a6c236 Derived From Document ID : adobe:docid:indd:2de21ecc-feeb-11db-b888-c933c53c5fa9 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:33908fdd-a28b-4015-9e2f-56dd5e1373dc, uuid:88acad87-e2ed-457b-9f3c-9063fd32441c, uuid:4eb6a24c-46f0-4adc-907c-f9a2809007c2, uuid:3e5c241c-b1a6-476d-92a1-1bde9f7649bc, uuid:f16bc142-d83a-46b0-a889-28994ed74b96, uuid:ca0f65d4-8ec8-48c8-8add-78765e5a9c67, uuid:ca0f65d4-8ec8-48c8-8add-78765e5a9c67, uuid:21833166-848b-4c49-8ab9-9c6701ce602c Manifest Reference Document ID : uuid:163BC797262ADC11A456FEE3348C9702, uuid:28B96A240531DC11AD62F53C99F1BA57, uuid:11F0CEFE1B31DC11AD62F53C99F1BA57, uuid:D690DC611144DC119C52927D3DADB98A, uuid:C63F38972131DC11AD62F53C99F1BA57, uuid:C83F38972131DC11AD62F53C99F1BA57, uuid:C83F38972131DC11AD62F53C99F1BA57, uuid:0FE552874046DC11B1B988808519BE5A Create Date : 2007:09:11 10:41:35+02:00 Modify Date : 2007:09:11 10:42:05+02:00 Metadata Date : 2007:09:11 10:42:05+02:00 Creator Tool : Adobe InDesign CS2 (4.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 7848 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 21 Page Layout : OneColumn Creator : Adobe InDesign CS2 (4.0.5)EXIF Metadata provided by EXIF.tools