NexusData GA0001 DSSS Gas Meter Transmitter User Manual intallation manual

NexusData Ltd. DSSS Gas Meter Transmitter intallation manual

intallation manual

NexusData Transmitter Installation and InitializationGeneralIn order to comply with FCC RF Exposure requirements, the AMR unitmust be installed in such a way that there is a 2m (6’ 8”) separationdistance between it and all persons during normal operation.Assembly1. Disassemble old index cover.2. Disassemble the index from the meter.3. Attach the Transmitter to the meter, matching its shaft to the metershaft. Use four 56m”m screws to secure the Transmitter in its position.Verify that the shaft enables some free rotation, indicating that theshafts are properly aligned.4. Assemble the index on the Transmitter, using two 10m”m screws,matching its shaft to the Transmitter shaft.5. Attach new index cover to the Transmitter, using four 20m”m screws.6. Initialize the AMR unit using the Mint handheld terminal/programmer:6.1. Press 1 from the General Menu below, for WO (work order) byroute to initialize the next AMR unit.6.2. Browse work order (< and > keys) and verify the details. Thenproceed with the ENTER key. Example:→→1. WO by route2. Add WO3. Read TX4. Program TXWO: 1/ 36 to do > Loc: Garage/LeftAddress: 1678 NPiedmont Rd, Atlanta,GA 30303Key in '1’Key ENTER
6.3. Verify that meter parameters (meter number, number of dials,index drive and index pressure) presented are correct. Then select‘4’ (CCF Reading) and enter the reading appearing on the index.Example 6.4. Press on the program key to initializing the AMR unit.7. Cover the outdoor screws using seals.FCC WarningModifications not expressly approved by the manufacturer couldvoid the user authority to operate the equipment under FCC Rules.→Key ‘4’Enter Reading asappears on index(e.g. 1234)Key ENTERMeter: 1112223331. No. of Dials: 4 2. Index Drive: 1 3. Index Pressure: LP 4. CCF Reading: _
Exhibit 1
Exhibit 2

Navigation menu