NexusData TR0001 Network Transceiver Repeater User Manual 261023

NexusData Ltd. Network Transceiver Repeater 261023

User Installation Manual

REV.
ECO No. APPROVED NAME SIGNATURE
A First release
NAME SIGNATURE DATE
DESCRIPTION:
Product Manager
R&D Manager INSTALLATION GUIDE
Testing REPEATER
Manufacturing Eng. Shay Aharon RX-TX
QA
Engineering Shay Aharon
SH
1
OF
DRAW No.
DC00019-001
REV.
A
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _2_ OF_13_
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _3_ OF_13_
Table of Contents
Mechanical Assembly Description............................4
PCB...........................................................................4
Front Box...................................................................4
Gland.........................................................................5
Assembly Pcb............................................................6
Cover Pcb..................................................................7
Label..........................................................................7
Mounting....................................................................9
AC Cable…………………………………………………9
Top Cover................................................................10
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _4_ OF_13_
Mechanical Assembly Description
FCC Warning
Modifications not expressly approved by the manufacturer
could void the user authority to operate the equipment under
FCC Rules.
In order to comply with FCC RF Exposure requirements,
the AMR unit must be installed in such a way that there
is a 20 c”m separation distance between it and all
persons during normal operation.
Front Box
Attach standoffs with plain washer, nut and spring washer to the lower
board.
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _5_ OF_13_
Attach the lower board into the front box and assemble screws.
Gland
Assemble gland with nut and washer.
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _6_ OF_13_
Assembly Pcb
Assemble the Pcb into the front box and hold it with standoffs, screws,
and washers.
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _7_ OF_13_
Cover Pcb
Place the RF shield above Pcb and assemble screws and washers.
Label
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _8_ OF_13_
Place warning label on top of the RF shield.
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _9_ OF_13_
Antenna
Place the antenna and assemble plastic screws.
Mounting
Place the bracket and tighten with screws.
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _10_ OF_13_
AC Cable
place the AC cable into the front box
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _11_ OF_13_
Assemble AC cable with screws
Top Cover
Place the top cover on the front box and assemble screws.
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _12_ OF_13_
Sealed the top cover with strips.
Final assembly
DRAW NO.: DC00019-001
DESCRIPTION:
FINAL ASSEMBLY
REPEATER RX-TX
REV
A
SH. _13_ OF_13_

Navigation menu