NexusData TR0001 Network Transceiver Repeater User Manual 261023

NexusData Ltd. Network Transceiver Repeater 261023

User Installation Manual

REV. ECO No. APPROVED NAME SIGNATURE A First release NAME SIGNATURE DATE DESCRIPTION: Product Manager R&D Manager INSTALLATION GUIDE Testing REPEATER Manufacturing Eng. Shay Aharon RX-TX QA Engineering Shay Aharon SH 1 OF DRAW No. DC00019-001 REV. A
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _2_ OF_13_
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _3_ OF_13_ Table of Contents Mechanical Assembly Description............................4 PCB...........................................................................4 Front Box...................................................................4 Gland.........................................................................5 Assembly Pcb............................................................6 Cover Pcb..................................................................7 Label..........................................................................7 Mounting....................................................................9 AC Cable…………………………………………………9 Top Cover................................................................10
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _4_ OF_13_ Mechanical Assembly Description FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. In order to comply with FCC RF Exposure requirements, the AMR unit must be installed in such a way that there is a 20 c”m separation distance between it and all persons during normal operation. Front Box Attach standoffs with plain washer, nut and spring washer to the lower board.
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _5_ OF_13_ Attach the lower board into the front box and assemble screws. Gland Assemble gland with nut and washer.
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _6_ OF_13_ Assembly Pcb Assemble the Pcb into the front box and hold it with standoffs, screws, and washers.
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _7_ OF_13_ Cover Pcb Place the RF shield above Pcb and assemble screws and washers. Label
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _8_ OF_13_ Place warning label on top of the RF shield.
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _9_ OF_13_ Antenna Place the antenna and assemble plastic screws. Mounting Place the bracket and tighten with screws.
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _10_ OF_13_ AC Cable place the AC cable into the front box
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _11_ OF_13_ Assemble AC cable with screws Top Cover Place the top cover on the front box and assemble screws.
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _12_ OF_13_ Sealed the top cover with strips. Final assembly
DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV A SH. _13_ OF_13_

Navigation menu