NexusData TR0001 Network Transceiver Repeater User Manual REVISION RECORD

NexusData Ltd. Network Transceiver Repeater REVISION RECORD

Contents

Revised Corrected User Installation Manual With Warning

REV. ECO No. APPROVED NAME SIGNATUREA First releaseNAME SIGNATURE DATE DESCRIPTION:Product ManagerR&D Manager INSTALLATION GUIDETesting NTRManufacturing Eng. Shay VersanoQAEngineering Shay VersanoSH1OF DRAW No. DC00019-001REV.A
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _2_ OF_19_Table of ContentsFCC Warning.................................................................................................................... 3Mechanical Assembly ..................................................................................................... 4Front Box .......................................................................................................................4Gland ............................................................................................................................. 5PCB Assembly............................................................................................................... 6PCB Cover..................................................................................................................... 7Label .............................................................................................................................. 8Antenna .........................................................................................................................9Mounting ...................................................................................................................... 10AC Cable ..................................................................................................................... 11Top Cover .................................................................................................................... 12Final Assembly ............................................................................................................ 13Field Installation............................................................................................................ 14General Instructions..................................................................................................... 14Installation Steps ......................................................................................................... 14
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _3_ OF_19_FCC WarningFCC WarningModifications not expressly approved by the manufacturercould void the user authority to operate the equipment underFCC Rules.In order to comply with FCC RF Exposurerequirements, the NTR unit must be installed in such away that there is a 2 meters separation distancebetween it and all persons during normal operation.The installer must maintain 2 meters separationdistance from the NTR when the device is operational.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _4_ OF_19_Mechanical AssemblyFront BoxAttach standoffs with plain washer, nut and spring washer to thelower board.Attach the lower board into the front box and assemble screws.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _5_ OF_19_GlandAssemble gland with nut and washer.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _6_ OF_19_PCB AssemblyAssemble the PCB into the front box and hold it with standoffs,screws, and washers.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _7_ OF_19_PCB CoverPlace the RF shield above PCB and assemble screws and washers.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _8_ OF_19_LabelPlace warning label on top of the RF shield.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _9_ OF_19_AntennaPlace the antenna and assemble plastic screws.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _10_ OF_19_MountingPlace the bracket and tighten with screws.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _11_ OF_19_AC Cableplace the AC cable into the front boxAssemble AC cable with screws
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _12_ OF_19_Top CoverPlace the top cover on the front box and assemble screws.Sealed the top cover with strips.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _13_ OF_19_Final Assembly
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _14_ OF_19_Field InstallationGeneral InstructionsThe NTR must be installed at least 3 meters above the floor.Select the installation location in where no moving/mobile norstatic objects would exist or enter into within 2 meters of theNTR surrounding, excluding the wall or pipe where the NTR isinstalled on.Installation StepsLocate installation place, on a roof of a dominate building inthe area where the NTR services are required.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _15_ OF_19_Mark 2 point for drilling.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _16_ OF_19_drill 2 holes.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _17_ OF_19_assemble screw-holders.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _18_ OF_19_Assemble 2 screws.
DRAW NO.: DC00019-001DESCRIPTION:FINAL ASSEMBLYREPEATER RX-TXREVASH. _19_ OF_19_NTR Final installation

Navigation menu