NexusData TR0001 Network Transceiver Repeater User Manual REVISION RECORD
NexusData Ltd. Network Transceiver Repeater REVISION RECORD
Contents
- 1. User Installation Manual
- 2. Revised Corrected User Installation Manual
- 3. Revised Corrected User Installation Manual With Warning
Revised Corrected User Installation Manual With Warning
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 275206 |
| Application ID | /S7aj2Eg9olcGcguGS1SdA== |
| Document Description | Revised Corrected User Installation Manual With Warning |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 94.48kB (1181028 bits) |
| Date Submitted | 2002-10-08 00:00:00 |
| Date Available | 2002-10-08 00:00:00 |
| Creation Date | 2002-10-08 09:55:50 |
| Producing Software | Acrobat Distiller 4.05 for Windows |
| Document Lastmod | 2002-10-08 10:00:29 |
| Document Title | REVISION RECORD |
| Document Creator | Microsoft Word 8.0 |
| Document Author: | Hagit_Isser |
REV. ECO No. First release APPROVED NAME Product Manager R&D Manager Testing Manufacturing Eng. QA Engineering SIGNATURE NAME DATE SIGNATURE DESCRIPTION: INSTALLATION GUIDE NTR Shay Versano Shay Versano SH OF DRAW No. DC00019-001 REV. Table of Contents FCC Warning.................................................................................................................... 3 Mechanical Assembly ..................................................................................................... 4 Front Box ....................................................................................................................... 4 Gland ............................................................................................................................. 5 PCB Assembly............................................................................................................... 6 PCB Cover..................................................................................................................... 7 Label .............................................................................................................................. 8 Antenna ......................................................................................................................... 9 Mounting ...................................................................................................................... 10 AC Cable ..................................................................................................................... 11 Top Cover .................................................................................................................... 12 Final Assembly ............................................................................................................ 13 Field Installation ............................................................................................................ 14 General Instructions..................................................................................................... 14 Installation Steps ......................................................................................................... 14 DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _2_ OF_19_ FCC Warning FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. In order to comply with FCC RF Exposure requirements, the NTR unit must be installed in such a way that there is a 2 meters separation distance between it and all persons during normal operation. The installer must maintain 2 meters separation distance from the NTR when the device is operational. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _3_ OF_19_ Mechanical Assembly Front Box Attach standoffs with plain washer, nut and spring washer to the lower board. Attach the lower board into the front box and assemble screws. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _4_ OF_19_ Gland Assemble gland with nut and washer. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _5_ OF_19_ PCB Assembly Assemble the PCB into the front box and hold it with standoffs, screws, and washers. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _6_ OF_19_ PCB Cover Place the RF shield above PCB and assemble screws and washers. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _7_ OF_19_ Label Place warning label on top of the RF shield. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _8_ OF_19_ Antenna Place the antenna and assemble plastic screws. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _9_ OF_19_ Mounting Place the bracket and tighten with screws. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _10_ OF_19_ AC Cable place the AC cable into the front box Assemble AC cable with screws DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _11_ OF_19_ Top Cover Place the top cover on the front box and assemble screws. Sealed the top cover with strips. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _12_ OF_19_ Final Assembly DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _13_ OF_19_ Field Installation General Instructions The NTR must be installed at least 3 meters above the floor. Select the installation location in where no moving/mobile nor static objects would exist or enter into within 2 meters of the NTR surrounding, excluding the wall or pipe where the NTR is installed on. Installation Steps Locate installation place, on a roof of a dominate building in the area where the NTR services are required. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _14_ OF_19_ Mark 2 point for drilling. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _15_ OF_19_ drill 2 holes. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _16_ OF_19_ assemble screw-holders. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _17_ OF_19_ Assemble 2 screws. DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _18_ OF_19_ NTR Final installation DRAW NO.: DC00019-001 DESCRIPTION: FINAL ASSEMBLY REPEATER RX-TX REV SH. _19_ OF_19_
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Producer : Acrobat Distiller 4.05 for Windows Creator : Microsoft Word 8.0 Modify Date : 2002:10:08 10:00:29+02:00 Author : Hagit_Isser Title : REVISION RECORD Create Date : 2002:10:08 09:55:50 Page Count : 19 Page Mode : UseNoneEXIF Metadata provided by EXIF.tools