Nietzsche Enterprise WZB01USB ZigBee Wireless USB Dongle User Manual usb 01 manual 72dpi

Nietzsche Enterprise Co., Ltd. ZigBee Wireless USB Dongle usb 01 manual 72dpi

User Manual

Nietzsche Enterprise CO,LTD.WZB-01USBZigBee USB DONGLEUser Manual
00ContentSafety noticePlease read and follow the instructions before use of this product. To prevent electrical shock or fire, do not attempt to disassemblethis unit and do not expose it to moisture of any kind; ex., rain,liquid spills.Only use attachments/accessories specified by the manufacturer01-02Introduction01Specification02Applications02Network Overview04Install USB dongle driver03WZB-01USBC ZigBee-Dongle04-05Setting USB dongle configuration06Computer COM Port setting07Make Network Link & LED indication04-07Getting start03Hardware OverviewA.B.C.*Note: pictures and contents are subject to change without prior noticeAccessoriesCD Quickview Data SoftwareUser Manual
01IntroductionWZB-01USBC Wireless ZigBee Dongle, for ModBus, General ApplicationsWZB-01USBDC Wireless ZigBee Dongle, for DIO Applications WZB-01USB series ZigBee USB Dongle features asa coordinator; easy to link and connect to theHost computer, provides fully compliant wirelessZigBee communications with routers/end device,suitable for home/building automation,Industrialcontrol and monitoring, lower power wirelesssensor networks & consumer Electronic Applications. IntroductionSpecificationNetwork protocolChip setRF powerTransmission distanceTransmission rateBaudrate choiceOutput interfaceParameterReceiver sensitivityAuto reconnectionNetwork supportsWorking voltageWorking temperatureOS SupportDimensionPRO IEEE 802.15.4./ZigBee2007TI C2530F256, 256K Flash SoC18dBm500M free space.Max. 250kbpsconfigurable(Default : 9600 8N1)USBBaudrate,PAN ID,RF Channel confirguable-92dBmAuto reconnection when interruptedStar, Tree, MeshUSB DC 5V-20~70oC,Max.90% RHWindows 2000,XP,Vista,Win 770x30x7mm
02ApplicationsNetwork Overview● Industrial and Domestic Applications● Service-based monitoring, security and awareness systems● Home Area Networks (HAN)● Home/ Building automationIntroductionStarMeshZigBee Network Topology ModelsRZigBee coordinator(ZC)Full Funcation Device(FFD,Router)Reduced Function Device(RFD)ControllerInternetPCNBPLCHUBUSBCoordingatorWZB-01USB donglefor Modbus/DIO protrolRS485ETHERNETWZB-D03 MDEnd deviceNetwork applicationNetwork topologyWZB-02485End deviceRouterRS485DIO
03WZB-01USBC ZigBee-DongleHardware OverviewReset / Add / RemoveFor indication link statusUSB socketLink buttonAntennaLED LightWireless data transmission to PC S1
04Getting startInstall USB dongle driverTo install the PL-2303 USB Driver From the CD enclosed
06Getting startCOM Port settingThe WZB-01USBC ZigBee dongle must be plugged into the PC.Go to My Computer, click right button on theclick Device Manager, then set COM port.(Prolific USB-to-Serial Comm Port) as below.mouse, select Content, choose Hardware,COM port setting items SettingBaud rateData bitsParityStop bitsFlow control9600 bps8None1None
07Getting startMake Network Link & LED indication** Note: Please be noted the dongle must connect with PC throusgh extended USB cableAfter above ZigBee network link successfully, user can start running their own monitoringsoftware and enjoy the great convenience of ZigBee wireless solutions.Join to network Dongle Press “S1” once Blue LED blinking flash, 30 seconds allowed for join turn to intermittent flash means well linkedOperation LED IndicatorFunctionRemove the joined device Dongle Press “S1” twice　Blue LED blinking flashes, 30 seconds allowed toremove 　turn to　 intermittent flashlight meansremoved.Reset or Refreshnetwork Dongle Press “S1” 3 seconds　　 Blue and red LED On for 1 second　　　turn to intermittent flash. 　Copyright 2011 Nietzsche Enterprise Co., Ltd. All rights reserved.Nietzsche Enterprise reserves the right to make changes and improvements to its product without notice.E-Mail : service@nhr.com.twWebsite: www.nhr.com.twCopyrightTechnical Support
Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (15.21) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.(15.19(a)(3)) FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu