Nikon 3142EB Digital Camera with 802.11b/g Transmitter User Manual 8 of 8
Nikon Corporation Digital Camera with 802.11b/g Transmitter 8 of 8
Nikon >
Contents
User Manual 8 of 8
Selecting Time zone from the Date menu displays the dialog shown in Step 1. Follow the steps below to set the clock to the time in a new time zone. Highlight Display map of world time zones. To change the home time zone, select The Setup Menu 86 Set clock to time in travel time zone. Highlight travel destination time zone. Set clock to time in new time zone. is displayed when camera is in shooting mode. To reset clock to home time zone, select in time zone menu (Step 1). To turn daylight saving time in selected zone on or off, highlight DaylightSaving and press . Clock will automatically be advanced one hour. Press button to exit to shooting or playback. in Step 1 and follow Steps 2–5. Monitor Settings The following options are available: Option Description Photo Info Choose information displayed in monitor. Brightness Choose from five settings for monitor brightness (default is 4). Photo Info The following display options are available: Display Option Description Show Info Indicators are displayed in monitor ( 6–7). Auto Indicators are displayed for 5 s. Hide Info Indicators are not displayed in monitor. Shooting mode Playback mode Indicators are displayed in monitor. In mode, framing Framing Grid grid is displayed to help frame pictures; other indicators are displayed for 5 s. The Setup Menu 87 Date Imprint Imprint date information on pictures as they are taken. Option Off Date Date and time Date counter Description Time and date do not appear on pictures. Date or date and time are imprinted on pictures taken while this option is in effect. Time stamp shows number of days between date of shooting and selected date (see below). At settings other than Off, the option selected is indicated by an icon in the monitor during shooting ( 6–7). Date Counter Pictures taken while this option is in effect are imprinted with the number of days remaining until or the number of days elapsed since a specified date. Use it to track the growth of a child or count down the days until a birthday or wedding. Up to three dates can be stored. To set, highlight, press rotary multi seStored lector to right, and enter date ( dates 71). To select, highlight and press button. Press button to view stored dates Press button to view display options Display Highlight Number of days, Years and days, or Yrs, options mnths, days and press button. Sample date counter time stamps are shown below. The Setup Menu Future date (days remaining) Past date (days elapsed) Date Imprint The date is recorded in the order selected in the DATE menu ( 71). Date imprint can not be used to print date information on existing pictures. See page 55 for a comparison of date imprint and Print set > Date. Data imprinted at an Image mode setting of TV screen (640) may be difficult to read. Choose PC screen (1024) or larger when using date imprint. 88 AF Assist If Auto is selected, AF-assist illumination will be used to assist the focus operation when the subject is poorly lit (AF-assist illumination is unavailable in some modes; 84). Choose Off to disable AF-assist illumination (note that the camera may be unable to focus if lighting is poor). Sound Settings Adjust the following sound settings: Option Button sound Shutter sound Volume Description When On is selected, beep will sound once when operations are completed successfully, three times when error is detected. Choose sound played when shutter is released (note that shutter sound may not always play; 84). Choose Off to disable shutter sound. Choose volume from Loud, Normal, and Off. Blur Warning Choose whether or not the blur warning is displayed ( may not always be displayed ( 84). 21). Note that the warning Auto Off Choose the time before the monitor turns off automatically to save power from 30 seconds, 1 minute (the default setting), 5 minutes, or 30 minutes. Regardless of the option chosen, the monitor will remain on for 3 minutes when menus are displayed, and for 30 minutes when Loop is selected during Pictmotion or slide show playback or the camera is powered by the supplied AC adapter. While the monitor is off, the power-on lamp will blink. The camera will turn off automatically if no operations are performed for another three minutes. The Setup Menu 89 Format Memory/ Format Card If no memory card is inserted, this option is named Format memory and formats internal memory. Otherwise it is named Format card and formats the memory card for use in the camera. Note that formatting permanently deletes all pictures and other data. Be sure to make copies as required before formatting. Two format options are available when a memory card is inserted: Quick format (formats only areas of the card on which data are stored) and Normal (formats entire card). Normal is not available when batteries are low. Format Do not turn the camera off, disconnect the AC adapter, or remove the battery or memory card during formatting. Use the Normal option to format memory cards before first use and reformat them regularly thereafter. Without regular formatting, performance will drop with use. Language Choose a language for camera menus and messages from the following options: Čeština Dansk Deutsch English Español Français Indonesia Czech Danish German English Spanish French Indonesian Italiano Nederlands Norsk Polski Português Русский Suomi Italian Dutch Norwegian Polish Portuguese Russian Finnish Svenska Swedish Simplified Chinese Traditional Chinese Japanese Korean Thai Interface Adjust settings for connection to a computer or video device. The Setup Menu Option USB Video mode Auto transfer Description Select USB option for connection to computer ( 54) or printer ( Choose from NTSC and PAL ( 52). Choose On to mark all new pictures for transfer to computer ( Reset all Select Reset to restore camera settings to their default values ( Firmware Version View the current camera firmware version. 90 87). 56, 60). 53). Technical Notes Optional Accessories At the time of writing, the following optional accessories and replacement items were available for this camera. Contact your local retailer or Nikon representative for details. Rechargeable battery Battery charger AC adapter Cradle ImageLink-compatible printer adapter Wireless printer adapter USB cable A/V cable Water-resistant case Rechargeable EN-EL8 Li-ion batteries MH-62 battery charger EH-64 AC adapter MV-15 COOL-STATION PV-10 dock insert PD-10 wireless printer adapter. UC-E10 USB cable EG-E5000 audio/video cable FJ-CP1 field jacket (water resistant to 3 m/9 ft. 10 in.) Approved Memory Cards The following memory cards have been tested and approved for use in the COOLPIX S6: Panasonic 64 MB, 128 MB, 256 MB, 256 MB*, 512 MB, 512 MB*, 1 GB, 1 GB* SanDisk 64 MB, 128 MB, 256 MB, 256 MB*, 512 MB, 512 MB*, 1 GB, 1 GB* Toshiba 64 MB, 128 MB, 128 MB*, 256 MB, 256 MB*, 512 MB, 512 MB*, 1 GB * High speed (10 MB/s) Other cards have not been tested. For more details on the above cards, please contact the manufacturer. Technical Notes Memory Cards • Use only Secure Digital (SD) memory cards. • Format memory cards before first use ( 76). • Do not eject the memory card, turn the camera off, remove the batteries, or disconnect the AC adapter during formatting or while data are being written to or deleted from the card. Failure to observe this precaution could result in loss of data or damage to the camera or card. • Do not disassemble or modify. • Do not drop, bend, or expose to water or strong physical shocks. • Do not touch the metal terminals with your fingers or metal objects. • Do not affix labels or stickers to the memory card. • Do not leave in direct sunlight, closed vehicles, or areas exposed to high temperatures. • Do not expose to high levels of humidity or to corrosive gas. 91 Caring for the Camera To ensure continued enjoyment of this Nikon product, observe the following precautions when storing or using the device. Handle the lens and all moving parts with care The lens, monitor, and battery-chamber/ memory card slot and lens covers are easily damaged. Do not use force. Force applied to the lens cover could cause malfunction or damage the lens. Should the monitor break, care should be taken to avoid injury due to broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes or mouth. Do not point the lens at strong light sources for extended periods Avoid framing the sun or other strong light sources for extended periods when using or storing the camera. Intense light may cause deterioration in the image sensor, producing a white blur effect in photographs. Turn the product off before removing or disconnecting the power source Do not unplug the product or remove the battery while the product is on, or while images are being recorded or deleted. Forcibly cutting power could result in loss of data or in damage to product memory or circuitry. To prevent an accidental interruption of power, do not move the product while the AC adapter is connected. Technical Notes Keep dry The device will be damaged if immersed in water or subjected to high levels of moisture. Do not drop The product may malfunction if subjected to strong shocks or vibration. Keep away from strong magnetic fields Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage data stored on the memory card, or affect the product’s internal circuitry. Avoid sudden changes in temperature Sudden changes in temperature, such as occur when entering or leaving a heated building on a cold day, can cause condensation inside the device. To prevent condensation, place the device in a carrying case or a plastic bag before exposing it to sudden changes in temperature. The AF-Assist Illuminator LED The light-emitting diode (LED; 2, 21) used in the AF-assist illuminator conforms to the following IEC standard: CLASS 1 LED PRODUCT IEC60825-1 Edition 1.2-2001 Notes on the Monitor • The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic common to all TFT LCD displays, and does not indicate a malfunction. Images recorded using the product will not be affected. • When you frame bright subjects, vertical comet-like streaks that whiten toward either end may appear in the display. This phenomenon, known as “smear,” does not appear in the final photograph and does not indicate a malfunction. Some smear may appear in movies. • Images in the monitor may be difficult to see in a bright light. • The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon service representative. 92 Cleaning Lens Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other). To remove fingerprints or other stains that can not be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts in the center of the lens and works out to the edges. If this fails, clean the lens using a cloth lightly dampened with commercial lens cleaner. Monitor Remove dust or lint with a blower. To remove fingerprints and other stains, clean the monitor with a soft, dry cloth, being careful not to apply pressure. Body Use a blower to remove dust, dirt, or sand then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt with a dry cloth lightly dampened with fresh water, then dry thoroughly. Note that foreign matter inside the camera could cause damage not covered under warranty. Do not use alcohol, thinner, or other volatile chemicals. Technical Notes Batteries • Check the battery level when taking the camera out and charge the battery if necessary ( 11). Do not continue charging once the battery is fully charged, as this will result in reduced battery performance. If possible, carry a fully-charged spare battery when taking pictures on important occasions. • Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F). During charging, the temperature should be in the vicinity of 5–35 °C (41–95 °F). Note that the battery may become hot during use; wait for the battery to cool before charging. Failure to observe these precautions could damage the battery, impair its performance, or prevent it from charging normally. • On cold days, the capacity of batteries tends to decrease. Be sure that the battery is fully charged before heading outside to take pictures in cold weather. Keep spare batteries in a warm place and exchange as necessary. Once warmed, a cold battery may recover some of its charge. • Dirt on the battery terminals can prevent the camera from functioning. • When the battery is not in use, remove it from the camera or battery charger and replace the terminal cover. The camera and battery charger draw minute amounts of current even when off ; if left in place, the battery could be drained to the point that it no longer functions. Turning the camera on or off while the battery is exhausted can result in reduced battery life. If the battery will not be used for an extended period, store it in a cool (15 °C–25 °C / 59 °F– 77 °F), dry place. Recharge it at least once a year and run it flat before returning it to storage. • Replace the battery when it no longer holds a charge. Used batteries are a valuable resource. Please recycle used batteries in accordance with local regulations. 93 Storage Turn the camera off when not in use. Check that the power-on lamp is off before putting the camera away and remove the batteries if the camera will not be used for an extended period. Do not store the camera with naptha or camphor moth balls or in locations that: • are next to equipment that produces strong electromagnetic fields, such as televisions or radios • are exposed to temperatures below –10 °C (14 °F) or above 50 °C (122 °F) • are poorly ventilated or subject to humidities of over 60% To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting the camera away again. Error Messages The following table lists the error messages and other warnings that appear in the monitor and how to deal with them. Display (blinks) WARNING ! ! BATTERY EXHAUSTED (● blinks red) (blinks) Technical Notes WARNING ! ! Please wait for camera to finish recording Problem Clock not set. Battery running low. Solution Set clock. Prepare to charge or change battery. 71 10–11 Battery exhausted. Charge or change battery. 10–11 Use focus lock to focus on another subCamera cannot focus. ject at same distance, then recompose 66 picture. Use flash, or steady camera using triSlow shutter speed. Pic- pod, by placing camera on level sur18, 20 tures may be blurred. face, or by holding camera in both hands with elbows against torso. Camera cannot perform Message clears from display automatiother operations until cally when recording is complete. recording is complete. MEMORY CARD IS WRITE Write-protect switch is PROTECTED in “lock” position. No memory card insertNO MEMORY CARD ed in Pictmotion mode. THIS CARD CANNOT BE USED Error accessing memory card. WARNING ! ! THIS CARD CANNOT BE READ 94 — Slide write-protect to “write” position. 13 Insert memory card. 12 • Use approved card. • Check that connectors are clean. • Confirm that memory card is correctly inserted. 77 — 12 Display CARD IS NOT FORMATTED FORMAT NO Problem Solution Memory card has not Highlight FORMAT and press butbeen formatted for use ton to format card, or turn camera off in camera. and replace card. 12 95 Technical Notes Error occurred while re- Format internal memory or memory 76 cording picture. card. • Insert new memory card. 12 Camera has run out of • Select Reset all after either inserting 76 file numbers. new memory card or formatting inIMAGE CANNOT BE SAVED ternal memory or memory card. or Cannot create cropped, Select picture that supports crop, 89 D-lighting, or small copy. D-lighting, or small picture. Picture cannot be used Choose picture 640 × 480 pixels or larg— for welcome screen. er. Cannot copy picture. Delete pictures from destination. 68 IMAGE HAS ALREADY BEEN MODIFIED. Original does not support D-lighting can not be used with cop89 DLIGHTING CANNOT D-lighting. ies. BE USED. SOUND FILE CAN Select Reset all after either inserting Camera has run out of NOT BE SAVED new memory card or formatting inter- 76 file numbers. nal memory or memory card. or Time out error while re- Choose memory card with faster write CANNOT RECORD MOVIE 77 cording movie. speed. • Choose smaller image size. 61 • Delete pictures or voice recordings. 40, 68 OUT OF MEMORY Memory card is full. • Insert new memory card. 12 or • Remove memory card and use inter- 13 nal memory. CARD CONTAINS NO No pictures available for playback. — IMAGES No sound files available for playback. — NO SOUND FILE FILE CONTAINS File not created with NO IMAGE DATA View file on computer or other device. — COOLPIX S6. CANNOT PLAY FILE ALL IMAGES ARE HIDDEN No pictures available for welcome screen or slide show. — PICTMOTION PLAYBACK Pictmotion files have Delete affected Pictmotion movie. 51 ERROR been deleted or moved. THIS IMAGE CANNOT BE Picture is protected. Remove protection. 68 DELETED Display NEW CITY IS IN THE CURRENT TIME ZONE INITIALIZING LENS CANNOT FOCUS LENS ERROR LENS COVER ERROR Profile not registered. Set up profile. COMMUNICATIONS ERROR NETWORK CONNECTION FAILED Failed to connect to (name of host) NO IMAGES ARE MARKED FOR TRANSFER TRANSFER ERROR Technical Notes Battery exhausted. Transfer terminated. Connection error. SYSTEM ERROR PRINTER ERROR CHECK PRINTER STATUS 96 Problem Solution Destination in same No need to change time zones if destitime zone as home. nation is in same time zone as home. Wait until message has cleared from Camera cannot focus. display and camera has zoomed all the way out. Turn camera off and then on again. If Lens error. error persists, contact retailer or Nikon representative. Finger or other obstrucTurn camera off and remove obstruction prevents lens cover tion. from opening. No wireless profiles Create profile. available. USB cable disconnected If PictureProject displays error, click OK during transfer or print- to exit. Resume operation after turning ing. camera off and reconnecting cable. USB option incorrect. Choose correct USB option. PictureProject did not See the PictureProject reference manustart. al (on CD) for more information. Unable to connect to Check that profile matches settings for wireless network. host or wireless LAN adapter. Unable to connect to Check settings for host or wireless selected host. LAN. No pictures selected for Select pictures for transfer and try transfer. again. • Check battery level. • USB: Check that cable is connected. Transfer error. • Wireless: Check signal status and remove any obstacles between camera and wireless adapter or access point. Turn camera off and recharge battery, Battery exhausted durthen turn camera on and select wireing wireless transfer. less mode. Check signal status and remove any Wireless transfer interobstacles between camera and wirerupted. less adapter or access point. Turn camera off, remove and reinsert Error has occurred in batteries, and turn camera on. If error camera’s internal cirpersists, contact retailer or Nikon repcuitry. resentative. Check printer. To resume, highlight RePrinter error. sume (if available) and press . 72 — 14 2, 14 00–00 52–53, 56 54 — 00–00 00–00 68 14 52–53 00–00 00–00 10 — Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon representative. Refer to the page numbers in the right-most column for more information. Problem Camera turns off without warning Monitor is blank • • • • • • • • • • Solution Battery is low. 14 Camera has turned off automatically to save power. 14 Battery is cold. 93 Camera is off. 14 Battery is exhausted. 14 Standby mode: monitor turns on when controls are used. 14 Flash lamp blinks red: wait until flash has charged. 20 USB cable is connected. 53, 56 A/V cable is connected. 52 Time lapse or interval timer photography in progress: mon- 36, 64 itor turns off automatically between shots No indicators appear Hide info is selected for Photo info. Select Show info. in monitor • Monitor has dimmed to save power: monitor brightens Monitor is hard to when controls are used. read • Adjust monitor brightness. • Monitor is dirty: clean monitor. Camera clock is not Check camera clock regularly against more accurate timecorrect pieces and reset as required. Clock battery exhausted: recharge clock battery. Pictures Camera settings reset recorded before clock has been set will have time stamp of “00.00.0000 00:00”; movies will be dated “01.01.2006 00:00.” No picture taken • Camera is in playback mode: press button. when shutter-release • Menus are displayed: press button. button is pressed • Battery is exhausted. 73 14 73 79 71 71 41 17 14 97 Technical Notes Electronically Controlled Cameras In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the batteries, and then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected. Problem Technical Notes Solution • Subject is low in contrast, dominated by repeating geomet- 66 ric patterns, covers too small an area of the frame, or contains many fine details, objects of sharply differing brightCamera can not focus ness, or objects at different distances from the camera. Use using autofocus focus lock to focus on another subject at same distance. • Off is selected for AF assist option in camera setup menu. 75 • Focus error. Turn camera off and then on again. 14 • Use flash. 20 Pictures are blurred • Use BSS. 65 • Use tripod and self-timer. 3, 22 20 • Flash is off. 18 • Flash window is blocked. 20 Pictures are too dark • Subject is outside range of flash. 25, 31, • Exposure compensation is too low. (underexposed) 63 20, 28 • Subject is backlit: select (scene mode) or use fill flash. Pictures are too bright 25, 31, Exposure compensation is too high. (overexposed) 63 Shutter speed too slow. Noise can be reduced by: Randomly-spaced • Using flash 20 bright pixels (“noise”) • Setting ISO sensitivity to 50 65 appear in image • Choosing scene mode option with noise reduction 28, 34 Pictures are smeared Lens is dirty. Clean lens. 79 Colors are unnatural White balance does not match light source. 62 Flash is off. Note that flash turns off automatically in mode 20, 26, (Time lapse movie excepted) and some scene modes or Flash does not fire 35, 63, when option other than Single or Intvl timer shooting is 65 selected for Continuous or BSS is on. 75 • Off is selected for AF assist option in camera setup menu. AF-assist illuminator • AF assist illumination turns off automatically in (POR- 26 does not light TRAIT excepted), , , (NIGHT PORTRAIT excepted), , , , and modes. Bright specks in picFlash is reflecting from particles in air. Turn flash off. 20 tures taken with flash • Off is selected for Blur warning in camera setup menu. 75 Blur warning is not • Blur warning is not displayed in self-timer, , , , , or 22, 26, displayed mode or when option other than Single is selected for 35, 63, Continuous or BSS is on. 65 Sound is not played when Off selected for Sound settings > 34, 35, No sound when Shutter sound, BSS on, option other than Single selected 63, 65, shutter is released for Continuous, or or mode is selected. 75 98 Problem Optical zoom cannot be used Digital zoom cannot be used Unexpected results when flash set to (auto with red-eye reduction). Image mode not available Solution Optical zoom cannot be used while shooting movies. 35 Digital zoom is not available when Multi shot 16 is selected 63 for Continuous. In-camera red-eye fix may, in very rare cases, be applied to areas not affected by red-eye. Set flash to (auto) or 20, 24, (fill-flash) and try again. Note that red-eye reduction is the 33, 34 default setting for one-touch portrait, , and modes. Image mode cannot be adjusted when Multi shot 16 is selected for Continuous or “Sports composite” is selected in 34, 63 scene mode. 71 26, 35, 63, 65 36, 64 — 37, 42, 69 37 89 48 Technical Notes Date imprint not Camera clock has not been set. available Date not appearing Date does not appear on movies or pictures taken using , on pictures , (Sports composite excepted), Continuous, or BSS. • Time lapse or interval timer photography in progress: picPictures cannot be tures can not be played back until recording is complete. played back • File has been overwritten or renamed by computer or other make of camera. Cannot zoom in on Playback zoom cannot be used with movies, small pictures, picture or pictures that have been cropped to below 320 × 240. Cannot record voice Voice memos cannot be appended to movies. memo Cannot use crop, These options cannot be used with movies and may not be D-lighting, or small available with pictures created with other cameras. Select picture options picture that supports crop, D-lighting, or small picture. Camera may be unable to create Pictmotion movies using Cannot create new pictures recorded with other cameras. Other cameras may Pictmotion movie be unable to play Pictmotion movies created with COOLPIX S6. Cannot mark pictures No more than 999 pictures can be marked for transfer. Use for transfer PictureProject Transfer button to transfer pictures. Transfer marking does Pictures were marked for transfer using another model of not appear camera. Mark pictures for transfer using S5. • Camera is off. • Battery is exhausted. PictureProject does • USB cable is not correctly connected. not start when cam- • Appropriate USB option is not selected. era is connected • Computer can not detect camera. See the PictureProject reference manual (on CD) for further information. 53 68 14 14 53 54 — 99 Problem Cannot transfer pictures Solution button can not be used to transfer pictures from internal memory when Mass Storage is selected for USB or if 53, 54 memory card is locked. Transfer pictures using PictureProject transfer button. Profile list is not displayed in wireless Set Interface > USB option in camera setup menu to PTP. 00–00 mode • Check that correct profile is selected. 00–00 • Change camera orientation or move camera closer to re- — Wireless signal is poor ceiver. • Remove any obstacles between camera and wireless LAN — adapter or access point. Pictures not displayed • Choose correct video mode. 52 on television • USB cable is connected: disconnect USB cable Format memory > Normal option not Batteries are low. 14 available Technical Notes 100 Appendix Operation Flowchart The following flowchart illustrates basic camera operations. Shooting Menus Press to select (auto) mode ( 18) Scene mode ( Shooting menu ( 26) Scene assist modes ( Movie mode ( Scene menu ( 32) 35) Voice recording mode ( One-touch portrait mode ( 24) 26) Framing assist menu ( Movie menu ( 38) 61) 32) 36) Voice recording menu ( 39) One-touch portrait menu ( Setup menu ( 25) 70) Playback Press to select Playback mode ( 41) Pictmotion mode ( Calendar mode ( Calendar menu ( 46) Voice recording playback ( 67) Pictmotion menu ( 45) List-by-date mode ( D-lighting ( Playback menu ( 48) 50) 45) List by date menu ( 39) 46) Copy sound files menu ( 40) 43) Setup menu ( 70) 101 Technical Notes Supported Standards • DCF: Design Rule for Camera File System (DCF) is standard widely used in the digital camera industry to ensure compatibility among different makes of camera. • DPOF: Digital Print Order Format (DPOF) is an industry-wide standard that allows pictures to be printed from print orders stored on the memory card. • Exif version 2.2: This camera supports Exif (Exchangeable Image File Format for Digital Still Cameras) version 2.2, a standard that allows information stored with photographs to be used for optimal color reproduction when images are output on Exif-compliant printers. • PictBridge: A standard developed by in cooperation with the digital camera and printer industries, allowing photographs to be output directly to a printer without connecting the camera to a computer. • ImageLink: The ImageLink standard allows pictures taken with a digital camera to be printed directly on a household printer, without using a computer. The camera can be connected directly to any ImageLink-compatible printer for one-touch picture printing. Defaults ( 61, 67, 70, 76) Choosing Reset for Reset all restores the following default settings: Option Shooting mode ( 18–25) Flash mode Self timer Macro close-up One-touch portrait Exposure compensation Photo effect Default Auto Off Off Normal Scene mode ( 26–34) Party/Indoor mode framing assist PORTRAIT mode framing assist LANDSCAPE mode framing assist SPORTS mode framing assist NIGHT PORTRAIT Exposure compensation Movie menu ( 36–37) Movie options Small size 320 Set interval time 30 s Auto-focus mode Electronic VR Pictmotion settings ( Music Sytle Playback order Fit to length Auto select Technical Notes Shooting menu ( Image mode White balance Exp. +/– Continuous Interval timer Single AF Off 50) Pachelbel Kanon Motion Random Repeat photos 10 pictures 61–66) Normal (2816) Auto Single 30 s Option Default Shooting menu (continued) BSS Off Exposure BSS Highlight BSS ISO sensitivity Color options AF-area mode Playback menu ( Slide show Frame intvl Auto Standard color Center 67–69) Setup menu ( 70–76) Menus Quick startup Welcome screen Monitor settings Photo info Brightness 3s Text On Animation Show info Date imprint AF assist Sound settings Button sound Shutter sound Volume Off Auto On Normal Blur warning Auto off Auto transfer On 1 min. On Miscellaneous Sound quality ( 39) Paper size ( 57, 58) High Default Choosing Reset also clears the current file number ( 89) from memory. Numbering will continue from the lowest number available (to reset file numbering to 0001, delete all pictures before selecting Reset). All other settings are unaffected, including Date ( 71), Date counter ( 74), Language ( 76), USB ( 76), and Video mode ( 76). 102 Image Mode ( 61), Movie Options ( 36), and Sound Quality ( 39) The following table lists the number of pictures, maximum length per movie, or maximum total voice recording length that can be recorded to internal memory or a 256 MB memory card, together with the size of still pictures printed at 300 dpi. Image mode Movie options Sound quality Setting Internal memory (22 MB) 256 MB memory card High (2816★) 85 Normal (2816) 14 165 Normal (2048) 26 305 PC screen (1024) 90 1045 TV screen (640) 193 2245 TV movie 640★ 19 s 3 min. 40 s Small size 320★ 38 s 7 min. 20 s Small size 320 1 min. 14 s 14 min. 30 s Pictmotion 320 1 min. 1 min. Smaller size 160 4 min. 7 s 48 min. 5 s Time lapse movie★ 225 frames 1800 frames Normal 46 min. 8 s 5 hr. High 16 min. 44 s 3 hr. 15 min. 55 s Print size (cm / in.) 24 × 18 / 9½ × 7 24 × 18 / 9½ × 7 17 × 13 / 7 × 5 9 × 7 / 3½ × 2½ 5 × 4 / 2 × 1½ — — — — — — — — * All figures are approximate. Actual capacity varies with make of memory card and, in the case of JPEG images, with the type of scene recorded. If memory remains for more than 9999 pictures, exposure count display will show 9999. Restrictions on Camera Settings ( 61) Restrictions apply to the following settings in mode: 103 Technical Notes Flash mode Flash turns off at Continuous settings of Continuous or Multi-shot 16 or when BSS is on. Original mode is restored when Single or Intvl timer shooting is selected or BSS is turned off. Self timer If self-timer is on, only one shot will be taken when shutter is released, regardless of settings chosen for Continuous and BSS. Original Continuous and BSS settings are restored when picture is taken or self-timer is turned off. Continuous Selecting Continuous or Multi-shot 16 turns BSS off. Original BSS setting is not restored when Single is selected. BSS Continuous is set to Single when BSS is on. Original setting is not restored when BSS is turned off. White White balance is set to Auto and can not be adjusted when Black and white, balance Sepia, or Cyanotype is selected for Color options. Original white balance is restored when Standard color or Vivid color is selected. Image File and Folder Names Pictures, movies, and voice memos are assigned file names with three parts: a four letter identifier, a four-digit file number assigned automatically by the camera in ascending order, and a three-letter extension (e.g., “DSCN0001.JPG”). Originals Identifier Extension Copies Still picture DSCN .JPG Cropped copy Movie DSCN .MOV Small copy Time-lapse movie INTN .MOV D-lighting copy Voice recording DSCN .WAV Voice memo Same as picture .WAV Identifier RSCN SSCN FSCN Extension .JPG .JPG .JPG Pictures and sound files are stored in folders named with a three-digit folder number followed by a five-character identifier: “P_” plus a three-digit sequence number for pictures taken using panorama assist (e.g, “101P_001”; 29–30), “INTVL” for interval timer photography (e.g., 64), “SOUND” or “SOUNE” for voice recordings (e.g., “101SOUND”; 38), and “101INTVL”; “NIKON” for all other pictures (e.g, “100NIKON”). Folders can hold up to 200 pictures; if a picture is taken when the current folder contains 200 pictures, a new folder will be created by adding one to the current folder number. If a picture is taken when the current folder is numbered 999 and contains 200 pictures or a picture numbered 9999, no further pictures can be taken until the medium is formatted ( 76) or a new memory card inserted. Files copied using Copy > Selected images or COPY SOUND FILES > Selected files are copied to the current folder, where they are assigned new file numbers in ascending order starting from the largest file number in memory. Copy > All images and COPY SOUND FILES > Copy all files copy all folders from the source device; file names do not change but new folder numbers are assigned in ascending order starting from the largest folder number on the destination device ( 40, 69). Pictmotion movies ( 48) are stored under the “NKSS” folder in folders named with a threedigit folder number followed by “PRJCT” (e.g., “101PRJCT”). Each folder contains the picture and sound files for a single Pictmotion movie. Technical Notes Copies ( 42, 43, 69) Copies created using crop ( 42), D-Lighting ( 43), and small picture ( 69) have the same transfer marking as the original but are not marked for printing or protection. Copies created using Copy ( 69) have the same protection marking as the original but are not marked for printing or transfer. The crop and small picture options can not be used with copies created with crop or small picture; D-lighting is not available with copies created with crop, D-lighting, or small picture. 104 Time Zones ( 71–72) The camera supports the time zones listed below. Increments of less than one hour are not supported; when travelling to or from destinations at half- or quarter-hour increments from Greenwich Mean Time (GMT), such as Afghanistan, Central Australia, India, Iran, Nepal, or Newfoundland, set the camera clock to local time ( 71–72). GMT +/– Location –11 Midway, Samoa –10 Hawaii, Tahiti –9 Alaska, Anchorage –8 PST (PDT): Los Angeles, Seattle, Vancouver –7 MST (MDT): Denver, Phoenix, La Paz –6 CST (CDT): Chicago, Houston, Mexico City –5 EST (EDT): New York, Toronto, Lima –4 Caracas, Manaus –3 Buenos Aires, São Paulo –2 Fernando de Noronha –1 Azores ±0 London, Casablanca GMT +/– +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 +11 +12 Location Madrid, Paris, Berlin Athens, Helsinki Moscow, Nairobi Abu Dhabi, Dubai Islamabad, Karachi Colombo, Dhaka Bangkok, Jakarta Beijing, Hong Kong (HK), Singapore Tokyo, Seoul Sydney, Guam New Caledonia Auckland, Fiji Technical Notes 105 Specifications Nikon COOLPIX S6 Digital Camera Type Compact digital camera Effective pixels 6.0 million CCD Image size (pixels) 1 2.5 Lens Focal length f/-number Construction 3 × Zoom-Nikkor ED Lens 5.8–17.4 mm (35 mm [135] picture angle equivalent: approx. 35–105 mm) f/3.0 – f/5.4 12 elements in 10 groups Digital zoom Up to 4 × (35 mm [135] picture angle equivalent: 420 mm) -in. CCD; total pixels: 6.2 million • 2,816 × 2,112 (2816★, 2816) • 1,024 × 768 (1024) • 2,048 × 1,536 (2048) • 640 × 480 (640) Autofocus (AF) Contrast-detect AF with AF-assist illumination Focus range (from lens) 30 cm (1 ft.) – ∞ Macro mode: 4 cm (1.6 in.)– ∞ (middle zoom position) Focus-area selection Center; manual with 99 focus areas AF-assist illumination Class 1 LED product (IEC 60825-1 Edition 1.2-2001); max. output: 1,500 µW Monitor Approximate frame coverage Storage Media File system File formats Technical Notes Exposure Metering Exposure control 3.0 in., 230,000-dot, wide viewing-angle low-temperature polysilicon TFT LCD with 5-level brightness adjustment Shooting mode: 97% horizontal and 97% vertical Playback: 100% horizontal and 100% vertical Internal memory (approx. 22 MB); SD (Secure Digital) memory cards DCF, Exif 2.2, and DPOF compliant Compressed: JPEG-baseline-compliant Movies: QuickTime Sound files: WAV Range 256-segment matrix, center-weighted, spot, spot AF area Programmed auto exposure with exposure compensation (–2.0 – +2.0 EV in steps of 1 3 EV) W: +1.2 – +16.1 EV T: +2.9 – +17.8 EV Shutter Speed Mechanical and charge-coupled electronic shutter 2 – 1 500 s Aperture Range Electronically-controlled ND filter selection f/3.0 and f/8.5 (W) ISO sensitivity ISO 50, 100, 200, 400; Auto (auto gain to ISO 200) Self-timer Can be selected from approximately 10 and 3 seconds duration 106 Built-in flash Range (approx.) Sync method W: 0.3–2.6 m/1 ft.– 8 ft. 6 in. Sensor flash system I/O terminals Multi connector (supports ImageLink) Interface USB Video output Can be selected from NTSC and PAL Wireless Standards Communications protocols Range (line of sight) Operating frequency Data rates* Security Access protocols T: 0.3 – 1.4 m/1 ft – 4 ft. 7 in. IEEE 802.11b/g (standard wireless LAN protocol), ARIB STD-T66 (standard for low power data communications systems) IEEE 802.11g: OFDM IEEE 802.11b: DBPSK, DQPSK, CCK Approximately 30 m/98 ft. (varies with location) 2412–2462 MHz (11 channels) IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps IEEE 802.11b: 1, 2, 5.5, and 11 Mbps TKIP, 128/64-bit (104/40-bit) WEP Infrastructure / ad-hoc Supported languages Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Indonesian, Italian, Japanese, Korean, Polish, Portuguese, Norwegian, Russian, Spanish, Swedish, Thai Power sources • One rechargeable Nikon EN-EL8 lithium-ion battery (supplied) • EH-64 AC adapter (supplied) Battery life Approximately 200 shots (EN-EL8)† Approximate dimensions 93 × 59 × 20 mm/3.7 × 2.3 × 0.8 in. (W × H × D) Approximate weight 135 g (4.8 oz.) without battery or memory card * Maximum logical data rates according to IEEE standard. Actual rates may differ. † Based on Camera and Imaging Products Association (CIPA) standard for measuring life of camera batteries. Measured at 25 °C (77 °F); zoom adjusted with each shot, flash fired with every other shot, image mode set to NORMAL. Unless otherwise stated, all figures are for a camera with fully-charged EN-EL8 battery operated at an ambient temperature of 25 °C (77 °F). Specifications Nikon will not be held liable for any errors this manual may contain. The appearance of this product and its specifications are subject to change without notice. 107 Technical Notes Operating environment Temperature 0 – 40 °C (32 – 104 °F) Humidity Less than 85% (no condensation) MV-15 COOL-STATION Supported cameras Nikon S6 digital cameras I/O terminals DC in, USB, audio-video out, camera connector Interface USB Operating temperature 0 – 40 °C (32 – 104 °F) Approximate dimensions 000 × 000 × 000 mm/0.0 × 0.0 × 0.0 in. (W × H × D, excluding projections) Approximate weight 00 g (0.0 oz) PV-10 Dock Insert Approximate dimensions 135.5 × 22.5 × 63 mm/5.3 × 0.9 × 2.5 in. (W × H × D, excluding projections) Approximate weight 33 g (1.2 oz) EH-64 AC Adapter Rated input 100–240 V AC, 50/60 Hz, 0.18–0.1 A Rated capacity 18–22 VA Rated output DC 4.8 V / 1.5 A Operating temperature 0 – 40 °C (32 – 104 °F) Approximate dimensions 41 × 23.5 × 79 mm / 1.6 × 0.9 × 3.1 in. (W × H × D, excluding projections) Length of cord Approximately 1.7 m (5 ft. 7 in.) Approximate weight 110 g (3.9 oz), excluding power cable EN-EL8 Rechargeable Li-ion Battery Type Rechargeable lithium-ion battery Rated capacity 3.7 V / 730 mAh Operating temperature 0 – 40 °C (32 – 104 °F) Approximate dimensions 35 × 47 × 5 mm/1.4 × 1.9 × 0.2 in. (W × H × D, excluding projections) Approximate weight Technical Notes 108 17 g (0.6 oz), excluding terminal cover Index Clock, see Date Close-ups, 23, 28 Color options, 66 Computer, 52 copying pictures to, 52 Continuous, 63 Continuous AF, see Focus, mode Copies, 42, 43, 69. See also Copy (playback menu); Cropping pictures; D-lighting; Small pic. Copy (playback menu), 69 Cropping pictures, 42 Cyanotype, 66 Computer, 00–00. See also Wireless. Date, 71 Date and time, see Date printing, 55, 59, 74 Date counter, see Date imprint Date imprint, 74 Daylight saving time, see Date DCF, see Design rule for Camera File system Default settings, 87 restoring, see Reset all Delete, 68 Deleting pictures, 19, 41, 68 in full-frame playback, 19, 41 selected pictures, 68 Design rule for Camera File system, 86 Digital Print Order Format, 58–59, 86 Direct Print, see PictBridge D-lighting, 43 Dock insert, 60 DPOF, see Digital Print Order Format Electronic VR, 37 E-mail, 61, 69 Error messages, 80–82 Exif 2.2, 86 Exif Print, see Exif 2.2 Exp. +/–, 25, 31, 63 Exposure compensation, 25, 31, 63 scene mode, 31 shooting mode, 63 Extension, 89 Field jacket, see Accessories Fill flash, 20 Firmware, 76 Firmware version, 76 Flash, 20 mode, 20 Focus, 16, 66 area, 16, 66 face-priority, 24 indicator, 16 lock, 66 mode, 37 ,66 Format card, 76 Format memory, 76 Formatting, 12, 76 internal memory, see Format memory memory cards, see Format card Framing, 16, 18, 24, 32 guides, 32 Help, 17 ImageLink, 60, 86 Image mode, 61 Image size, see Image mode Indicator lamp, 11, 16, 36, 38, 64 Indoor photography, 20, 21, 26 Interface, 52, 53, 56, 60, 76 Internal memory, 12, 14 JPEG, 89 JPG, 89 Landscapes, 26 Language, 76 Language, choosing, 76 Lens, 2, 79 List by date, 46 Macro close-up, 23, 28 Memory cards, 12–13, 76, 77, 88 approved, 77 capacity of, 88 formatting, 12, 76 inserting and removing, 12–13 109 Index Symbols (auto) mode, 18 (calendar) mode, 45 (delete) button, 19, 41 (D-lighting) button, 2, 43 (list-by-date) mode, 46 (MENU) button, 3, 17 (mode) button, 3, 5, 17 (movie) mode, 35 (One-touch portrait) button, 2, 24 (Pictmotion) mode, 48 (playback) mode, 41 , , , , see scene assist modes (shooting/playback) button, 3, 19, 41 (voice recording) mode, 38 (voice recording) playback mode, 39 @ (wireless) mode, 00–00 (wait) icon, 16, 80 Accessories, 77 AEL, 29 AF●, see Focus, indicator Autofocus, see Focus AF-area mode, 66 AF Assist, 75 Auto-focus mode, 37 Auto off, 75 Auto transfer, see Interface A/V cable, 8, 52 Backlit subjects, 20, 28 Batteries, 10–11 Battery level indicator, 6–7, 14 Best Shot Selector, 65 Black-and-white, 66 Blur, 21, 75 Blur warning, 75 Brightness, see Monitor settings BSS, see Best Shot Selector Burst shooting, see Continuous; Scene assist, Sports ( ) Button sound, see Sound settings Calendar playback, 45 Index Memory card slot, 3, 12–13 Menus, 5, 17, 61 Menus, 70 Monitor, 3, 6–7, 79 brightness, 73 indicators in, 6–7 Monitor settings, 73 MOV, 89 Movies, 35–37 recording, 35–37 viewing, 37 MOVIE menu, 36–37 Moving subjects, 34, 63 Multi selector, 4, 17 Night photography, 20, 26 Noise reduction, 21, 27–28, 34 Normal, see Format card NTSC, see Video mode Number of exposures remaining, 14, 88 On/off, see Power switch One-touch portrait, 24–25 button, 2 menu, 25 PAL, see Video mode Panorama, 29–30 Photo info, see Monitor settings PictBridge, 55–59, 86 Pictmotion, 48–51 PictureProject, 50, 52–54 PLAYBACK MENU, 67–69 Playback, 19, 41 calendar, 45, 47 full-frame, 19, 41 list by date, 46–47 menu, 67–69 movies, 37 on TV, 52 Pictmotion, 51 thumbnail, 41 voice memo, 44 zoom, 42 Portraits, 24–25, 26 Power-on lamp, 2, 14 Power switch, 2 ,14 Printing pictures, 55–60. See also Date and time, printing; 110 Date imprint; Digital Print Order Format; PictBridge; Print set Print set, 59 Print size, 57–58 Protect, 68 Protected pictures, 6–7, 68, 76 Quick format, see Format card Quick startup, 70 QuickTime, 91 Red-eye reduction, see Flash, mode Reset all, 76, 87 (scene) mode, 26–31 Back light ( ), 28 Beach/Snow ( ), 27 Close-up ( ), 28 Copy ( ), 28 Dusk/Dawn ( ), 28 Fireworks show ( ), 28 Museum ( ), 28 Night landscape ( ), 28 Panorama assist ( ), 29–30 Party/Indoor ( ), 27 Sunset ( ), 27 Scene assist modes, 32–34 Landscape ( ), 33 Night portrait ( ), 34 Portrait ( ), 33 Sports ( ), 34 Secure Digital (SD), see Memory cards Self-timer, 22 Self-timer lamp, 2, 22 Sepia, 66 SET-UP MENU, 70–76 SHOOTING MENU, 61–66 Shutter-release button, 2, 16 Shutter sound, see Sound settings Single AF, see Focus, mode Size, see Image mode Sleep mode, see Auto off Slide show, 68 Slow sync, see Flash, mode Small pic., 69 Smear, 78 Sound, 37, 39, 44 ,51, 75 Sound settings, 75 Speedlight, see Flash Standby mode, see Auto off Strap, camera, 2–3 Support information, 1 Telephoto, see Zoom Television, 36, 52, 61, 76 connecting to, 52 Thumbnail playback, 41 Time, see Date Time zone, 71–72, 90 Timer, see Self-timer Transfer, 52–54 mark, 53 marking pictures for, 53, 68, 76 wireless, 00–00 Transfer marking, 68 Tripod, 3, 22, 27–28, 34 T button, see Zoom control USB, 54, 76. See also Interface USB, 52–54, 56, 60 cable, 8, 52–54 ,56 connection, 52–54, 56 connector, 8, 52–54, 56 VCR, 52 Video mode, 52, 76. See also Interface Vivid color, 66 Voice memo, 44 Voice recording, 38–40 Volume, 37, 39, 44, 51, 75 Volume, see Sound settings WAV, 89 Welcome screen, 71 White balance, 62 White balance, 62 preset, 62 Wide angle, see Zoom Wireless, 00–00 Wireless LED, 00–00 W button, see Zoom control Zoom, 15 digital, 15 indicator, 6–7, 15 optical, 15 playback, 42 Zoom control, 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2005:12:02 00:45:19Z Modify Date : 2005:12:21 15:25:43-08:00 Page Count : 25 Creation Date : 2005:12:02 00:45:19Z Mod Date : 2005:12:21 15:25:43-08:00 Producer : Acrobat Distiller 5.0.5 for Macintosh Metadata Date : 2005:12:21 15:25:43-08:00 Has XFA : NoEXIF Metadata provided by EXIF.tools