Ningbo Litesun Electronics WIFI-001 Smart Plug (LA-WF1) User Manual APP S LIGHT key

Ningbo Litesun Electronics Co.,Ltd Smart Plug (LA-WF1) APP S LIGHT key

User manual

Smart Plug USER MANUAL
NO.0Download and Install APPUse your phone to scan the QR code below or search “LTS Smart” in application market to download and install the App
NO.1Register/Login/Forgot passwordPicture 1RegisterIf you don't have an App account, register an account or sign in with verification code by SMS. This page describes the registration process.1.Tap to enter registration page2.The system automatically recognises your country / area. You can also select your country code. Enter the mobile number/E-mail and tap “Next” , as shown in the picture 23.If you enter the mobile number, then enter the verification code in the message , as shown in the picture 2，and enter the password，tap"Confirm" to finish your registration.4.If you enter the E-mail，enter the password as shown in the picture 4，and，tap"Confirm" to finish your registration.Picture 2 Picture 3NO.1
NO.1Sign in with username and password1.The system automatically recognises your country / area. You can also select your country code.Enter the mobile number/E-mail and tap “Next2.Enter your registered mobile number or Email, and password to login. Register/Login/Forgot passwordNO.1
NO.1Sign in with verification code via SMS1.Tap“Sign in with SMS verification”，to new page2.The system automatically recognises your country / area.You can also select your country code by yourself.3.Enter the mobile number and tap “Get” to get a message 4.Enter the verification code in the message and tap “Login” to login the AppRegister/Login/Forgot passwordNO.1
NO.1Picture 1Register/Login/Forgot passwordForgot passwordTo find your password back, please follow the procedures:1.Tap“Forgot password”，as shown in the picture 12.The system automatically recognises your country / area.You can also select your country code by yourself.Enter the mobile number/E-mail and tap “Next”,as shown in the picture 23.Enter the verification code in the message/E-mail , as shown in the picture 3，and enter the new password，tap"Confirm" to finish.Picture 2 Picture 3NO.1
NO.2Add device-Normal mode1.Enter the App, tap“+”in the upper right of the page to enter network connection page，as shown in the picture2.There are two network connection methods(Normal mode and AP mode). Normal mode is default. Users could tap the upper right corner to switch the connection method to AP mode. 3.For normal mode, please make sure the light rapidly flashes (2 times per second), tap to go on to the next step 4. If light is not rapidly flashing, tap “how to set light as rapid flashes” to view operation processes. NO.2
NO.2Notes: How to set light as rapid flashingAdd device-Normal modeNO.2
NO.21.For AP mode, please make sure the device’s indicator light slowly flashes(1 time every 3 seconds),tap to go on to the next step 2. If light is slowly flashing, tap “how to set light as slow flashes” to view operation processes.Add device-AP modeNO.2
NO.2Notes: How to set light as slow flashingAdd device-AP modeNO.2
NO.2Add device-Enter Wi-Fi passwordSelect the Wi-Fi under which device is working, enter password and tap “Confirm” to enter network connection process, as shown in the picture belowNO.2
NO.2If you select normal mode to connect device to the network, the App goes through the processes as shown in the picture 1. After the network connection is successfully, the App page will be shown in the picture 2图1图2Add device-Network connection processᦡᗝ०ᨳ҅ັଆۗ౯૪ೲ᧔กᦡᗝঅԧള᭗ኪრᳩೲ֖॔Ძᑁፗᛗ೰ᐏᅌளᳬ9:41 AM 100%ᬬࢧ Ⴒےᦡ॓  , ,,,,,,,,,25%9:41 AM 100% HJB smart wifi plug-d6c2NO.2
NO.3NO.2Add device-Network connection processFor AP mode，connect to the Wi-Fi hotspot named “SmartLife”, as shown in the pictureNotes: Some devices might have different hotspot names. NO.2
NO.2Add device-Network connection processPicture 1 Picture 2After connecting with the hotspot, back to the network connection page to enter network connection process. The App goes through as shown in the picture 1. Picture 2 shows the App page when the network connection is successful. ᦡᗝ०ᨳ҅ັଆۗ౯૪ೲ᧔กᦡᗝঅԧള᭗ኪრᳩೲ֖॔Ძᑁፗᛗ೰ᐏᅌளᳬ9:41 AM 100%ᬬࢧ Ⴒےᦡ॓  , ,,,,,,,,,25%NO.2
NO.2Add device-Adding failedIf your App interface is shown as in the picture, it means that the network connection failed. You could try by connecting again or view help. ᦡᗝ०ᨳ҅ັଆۗ౯૪ೲ᧔กᦡᗝঅԧള᭗ኪრᳩೲ֖॔Ძᑁፗᛗ೰ᐏᅌளᳬ9:41 AM 100%ᬬࢧ Ⴒےᦡ॓ NO.2
NO.3Control deviceAfter successfully configuring the devices, the smart device will be shown on the home page. Tap to enter its control pageNote:1. When device is online, it support short-cut operations2. When device is offline, it displays “Offline” and can be controlled. NO.3
NO.4Smart life scenarioSmart life scenario supports that devices perform corresponding actions under various conditions. The main conditions include: !!1.Temperature2.Humidity3.Weather4.PM2.55.Air quality6.Sunrise & sunset time7.Device’s actions (such as turn on/ff)GO HOMENO.4
NO.4Profile“Profile” page is where users could manage personal information. The key information is as follows: 1.Personal information2. Device Sharing：display the information of shared devices3.Message center4. Entry to submit feedback5. AboutNO.5
NO.4Profile“Profile” page is for displaying personal account information.You can change login password, binding mobile number,set pattern unlock on this page.NO.5
NO.4ProfileTap “Pattern unlock” to set your pattern.After setup,you have to enter your pattern to use the AppNO.5
NO.4Profile-Pattern UnlockSend sharing: The list shows all members who are added by your account. You can delete the member and delete the sharing by swiping left. Receive sharing: The list shows all devices that your account has received. You can delete the sharing by swiping left. NO.5
NO.4Profile-Device SharingAdd sharing: As shown in the picture, users could input a new member’s mobile number and share the device with him. The new member could then control the shared device. NO.5
NO.4Profile-Message centerMessage centre: Including notifications of new device and new sharingNO.5
NO.4ProfileFeedback: Entry where users could submit their feedbackNO.5
NO.4 ProfileApp’s other related information include:1.Tap on “rate us”, App will be redirected to a corresponding App market, where you could rate us 2. Show App version number AboutNO.5
This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.
Thank YouRemark：1) The pictures used in this manual are iOS app interface, Android version is a bit different.2) Product and software update periodically, the number and app interface in this manual are only for example. No extra notification on further changes.MPE RequirementsTo satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation.To ensure compliance, operations at closer than this distance is not recommended. Region SelectionLimited by local law regulations, version for North America does not have region selection option.

Navigation menu