Ningbo Litesun Electronics WIFI-001 Smart Plug (LA-WF1) User Manual APP S LIGHT key

Download:
Mirror Download [FCC.gov]
Document ID	3496582
Application ID	/QyqkZV+aZZztVPKKME65w==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	231.83kB (2897853 bits)
Date Submitted	2017-08-04 00:00:00
Date Available	2017-08-07 00:00:00
Creation Date	2017-06-08 08:22:16
Producing Software	Mac OS X 10.12.5 Quartz PDFContext
Document Lastmod	2017-06-08 08:22:16
Document Title	APP’S USER MANUAL（LIGHT）.key
Document Creator	Keynote

Smart Plug USER MANUAL
NO.0
Download and Install APP
Use your phone to scan the QR code below or search “LTS Smart” in
application market to download and install the App
NO.1
Register/Login/Forgot password
Register
If you don't have an App account, register an account or sign in with verification code by SMS.
This page describes the registration process.
1.Tap to enter registration page
2.The system automatically recognises your country / area. You can also select your country code.
Enter the mobile number/E-mail and tap “Next” , as shown in the picture 2
3.If you enter the mobile number, then enter the verification code in the message , as shown in the
picture 2，and enter the password，tap"Confirm" to finish your registration.
4.If you enter the E-mail，enter the password as shown in the picture 4，and，tap"Confirm" to finish
your registration.
Picture 1
Picture 2
Picture 3
NO.1
Register/Login/Forgot password
Sign in with username and password
1.The system automatically recognises your country /
area. You can also select your country code.Enter the
mobile number/E-mail and tap “Next
2.Enter your registered mobile number or Email, and
password to login.
NO.1
Register/Login/Forgot password
Sign in with verification
code via SMS
1.Tap“Sign in with SMS
verification”，to new page
2.The system automatically
recognises your country / area.
You can also select your country
code by yourself.
3.Enter the mobile number and
tap “Get” to get a message
4.Enter the verification code in
the message and tap “Login” to
login the App
NO.1
Register/Login/Forgot password
Forgot password
To find your password back, please follow the procedures:
1.Tap“Forgot password”，as shown in the picture 1
2.The system automatically recognises your country / area.You can also select your country code by
yourself.Enter the mobile number/E-mail and tap “Next”,as shown in the picture 2
3.Enter the verification code in the message/E-mail , as shown in the picture 3，and enter the new
password，tap"Confirm" to finish.
Picture 1
Picture 2
Picture 3
NO.2
Add device-Normal mode
1.Enter the App, tap“+”in the upper right of the
page to enter network connection page，as
shown in the picture
2.There are two network connection
methods(Normal mode and AP mode). Normal
mode is default. Users could tap the upper right
corner to switch the connection method to AP
mode.
3.For normal mode, please make sure the light
rapidly flashes (2 times per second), tap to go on
to the next step
4. If light is not rapidly flashing, tap “how to set
light as rapid flashes” to view operation
processes.
NO.2
Add device-Normal mode
Notes: How to set light as rapid flashing
NO.2
Add device-AP mode
1.For AP mode, please make sure the device’s
indicator light slowly flashes(1 time every 3
seconds),tap to go on to the next step
2. If light is slowly flashing, tap “how to set light as
slow flashes” to view operation processes.
NO.2
Add device-AP mode
Notes: How to set light as slow flashing
NO.2
Add device-Enter Wi-Fi password
Select the Wi-Fi under which device is
working, enter password and tap “Confirm” to
enter network connection process, as shown
in the picture below
NO.2
Add device-Network connection process
If you select normal mode to connect device to the network, the App goes through the processes as
shown in the picture 1. After the network connection is successfully, the App page will be shown in
the picture 2
100%
9:41 AM
Ꮟࢧ
9:41 AM
Ⴒ‫॓ᦡے‬
25%
HJB smart wifi plug-d6c2
ള᭗ኪრᳩೲ֖॔Ძᑁ
ፗᛗ೰ᐏᅌளᳬ
, ,
౯૪ೲ᧔กᦡᗝঅԧ
ᦡᗝ०ᨳ҅ັ፡ଆۗ
图1
图2
100%
NO.3
NO.2
Add device-Network connection process
For AP mode，connect to the Wi-Fi hotspot named
“SmartLife”, as shown in the picture
Notes: Some devices might have different hotspot
names.
NO.2
Add device-Network connection process
After connecting with the hotspot, back to the network connection page to enter network
connection process. The App goes through as shown in the picture 1. Picture 2 shows the
App page when the network connection is successful.
100%
9:41 AM
Ꮟࢧ
Ⴒ‫॓ᦡے‬
25%
ള᭗ኪრᳩೲ֖॔Ძᑁ
ፗᛗ೰ᐏᅌளᳬ
, ,
౯૪ೲ᧔กᦡᗝঅԧ
ᦡᗝ०ᨳ҅ັ፡ଆۗ
Picture 1
Picture 2
NO.2
Add device-Adding failed
9:41 AM
Ꮟࢧ
100%
Ⴒ‫॓ᦡے‬
If your App interface is shown as in the
picture, it means that the network connection
failed. You could try by connecting again or
view help.
ള᭗ኪრᳩೲ֖॔Ძᑁ
ፗᛗ೰ᐏᅌளᳬ
౯૪ೲ᧔กᦡᗝঅԧ
ᦡᗝ०ᨳ҅ັ፡ଆۗ
NO.3
Control device
After successfully configuring the devices, the
smart device will be shown on the home page.
Tap to enter its control page
Note:
1. When device is online, it support short-cut
operations
2. When device is offline, it displays “Offline”
and can be controlled.
NO.4
Smart life scenario
GO HOME
Smart life scenario supports that devices perform
corresponding actions under various conditions. The
main conditions include:
1.Temperature
2.Humidity
3.Weather
4.PM2.5
5.Air quality
6.Sunrise & sunset time
7.Device’s actions (such as turn on/ff)
NO.4
NO.5
Profile
“Profile” page is where users could manage
personal information. The key information is
as follows:
1.Personal information
2. Device Sharing：display the information of
shared devices
3.Message center
4. Entry to submit feedback
5. About
NO.4
NO.5
Profile
“Profile” page is for displaying personal account
information.You can change login password,
binding mobile number,set pattern unlock on this
page.
NO.4
NO.5
Profile
Tap “Pattern unlock” to set your pattern.After setup,you have to enter your
pattern to use the App
NO.4
NO.5
Profile-Pattern Unlock
Send sharing: The list shows all members who are added by your account.
You can delete the member and delete the sharing by swiping left.
Receive sharing: The list shows all devices that your account has received.
You can delete the sharing by swiping left.
NO.4
NO.5
Profile-Device Sharing
Add sharing: As shown in the picture, users
could input a new member’s mobile number and
share the device with him. The new member
could then control the shared device.
NO.4
NO.5
Profile-Message center
Message centre: Including notifications of new
device and new sharing
NO.4
NO.5
Profile
Feedback: Entry where users could submit their
feedback
NO.4
NO.5
Profile
About
App’s other related information include:
1.Tap on “rate us”, App will be redirected to a
corresponding App market, where you could rate
us
2. Show App version number
This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
MPE Requirements
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons during
device operation.
To ensure compliance, operations at closer than this distance is not recommended.
Region Selection
Limited by local law regulations, version for North America does not have region selection option.
Thank You
Remark：
1) The pictures used in this manual are iOS app interface, Android version is a bit different.
2) Product and software update periodically, the number and app interface in this manual are only for example. No extra notification on further changes.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 28
PDF Version                     : 1.4
Title                           : APP’S USER MANUAL（LIGHT）.key
Producer                        : Mac OS X 10.12.5 Quartz PDFContext
Creator                         : Keynote
Create Date                     : 2017:06:08 08:22:16Z
Modify Date                     : 2017:06:08 08:22:16Z

EXIF Metadata provided by EXIF.tools