Ningbo Pdlux Electronic Technology PD-V8 Microwave Sensor User Manual SIR13 installation instructions2

Download:
Mirror Download [FCC.gov]
Document ID	3450056
Application ID	wxi0dwnfuMLJAL7KowRJ9Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.35kB (679321 bits)
Date Submitted	2017-07-05 00:00:00
Date Available	2017-07-05 00:00:00
Creation Date	2017-06-13 16:41:30
Producing Software	Adobe Acrobat Pro 9.0.0
Document Lastmod	2017-06-13 16:41:30
Document Title	SIR13_installation_instructions2
Document Creator	Adobe Acrobat Pro 9.0.0
Document Author:	kwenners

Installation Instructions P D - V 8
Microwave Sensor
1)
2)
3)
4)
Provide 5V DC on pad 1 (4.75V-5.25V)
Provide DC ground onto PAD3
Connect PAD 2 (IF) to the µPC for signal processing
Operating temperature: -10-70°C
PAD1
PAD2
PAD3
The use of the transceiver is authorized into mobile or fixed devices taking into
account the conditions listed below :
• OEM Integrator may be sure that the end user manual may not contain any
information about the way to install or remove the module from the final
product.
• Depends on final host configuration additional authorization requirements for
the non-transmitter functions on the transmitter module may be required (i.e.,
Verification, or Declaration of Conformity) OEM integrator is responsible for
ensuring that after the module is installed and operational into the host, it
continues to be compliant with the Part 15B unintentional radiator
requirements.
• The information on label and user manual is required to be incorporated in the
user manual of the final system. see 47 CFR15 requirements for more details
(e.g. 15.19 / 15.21 / 15.101 / 15.105 / RSS-GEN / ICES)
• Additional label with the words ‘Contains FCC ID:2AIWWPD-V8 and ‘Contains
IC:20845-STACK102’ shall be applied and visible from the outside of the end
product.
• The module must be installed and used in strict accordance with the
manufacturer’s instructions as described in the user documentation that
comes with the product.
• The antenna of the module may not be removed, replaced nor modified. The
antenna must not be co-located or operating in conjunction with any other
antenna or transmitter. No additional antenna must be used.
Microwave Sensor
IC:20845-STACK102
FCC ID:2AIWWPD-V8
MODEL:PD-V8
Microwave Sensor
IC:20845-STACK102
FCC ID:2AIWWPD-V8
MODEL:PD-V8
20X12mm
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between theequipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : kwenners
Create Date                     : 2017:06:13 16:41:30+08:00
Modify Date                     : 2017:06:13 16:41:30+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2017:06:13 16:41:30+08:00
Creator Tool                    : Adobe Acrobat Pro 9.0.0
Format                          : application/pdf
Title                           : SIR13_installation_instructions2
Creator                         : kwenners
Document ID                     : uuid:f6d6e1c6-3457-4344-9786-ba2bcc34ac36
Instance ID                     : uuid:d265283d-0a25-41f4-876d-5f7ce9a11665
Producer                        : Adobe Acrobat Pro 9.0.0
Page Count                      : 3
For                             : Administrator,
Bounding Box                    : 0 0 781 1055
Container Version               : 11
Creator Version                 : 14
Image Height                    : 1055
Image Width                     : 781
Image Size                      : 781x1055
Megapixels                      : 0.824

EXIF Metadata provided by EXIF.tools