Nintendo Co RVL036 Wii Remote Plus User Manual

Nintendo Co Ltd Wii Remote Plus Users Manual

Users Manual

Wii Console Manual148Hx210WWii Operations ManualSystem SetupPRINTED IN CHINAMAA-RVL-S-USZ-C0NINTENDO OF AMERICA INC. P.O. BOX 957, REDMOND, WA 98073-0957 U.S.A. 61914INEED HELP WITH INSTALLATION,MAINTENANCE OR SERVICE?Nintendo Customer ServiceSUPPORT.NINTENDO.COMor call 1-800-255-3700BESOIN D’AIDE POUR L’INSTALLATION,L’ENTRETIEN OU LA RÉPARATION?Service à la Clientèle de NintendoSUPPORT.NINTENDO.COMou composez le 1-800-255-3700¿NECESITAS AYUDA DE INSTALACION, MANTENIMIENTO O SERVICIO?Servicio al Cliente de NintendoSUPPORT.NINTENDO.COMo llame al 1-800-255-3700
1Health and Safety Information 2-3System Components Wii Console 4-5 Wii Remote™ Plus 6 Nunchuk™ 7 Sensor Bar 7 Wii AC Adapter 8 Wii AV Cable 8 Wii Console Stand & Stand Plate 9System Setup Wii Console 10-11 Wii AV Cable 12 Sensor Bar 13-16 Wii AC Adapter 17 TV and Audio/Video Settings 18 Setup of Wii Remote Plus 19-21 Synchronizing Your Wii Remote Plus and Wii Console 22-23Using Game Discst 24Wii System Play Guidelines 25Using the Wii Remote Plus 26-27Using the Nunchuk 28-29Using Nintendo GameCube™ Controllers 30-31Using Memory Cards 32Troubleshooting 33-34FCC Information 35Warranty and Service Information 36NOTE: This product only plays Wii Game Discs and Nintendo GameCube™ Game Discs labeled with “For use only in USA, Canada, Mexico and Latin America”. This product does not play CD or DVD discs. This Wii console is for use only in the United States, Canada, Mexico or Latin America.TM, ® and the Wii logo are trademarks of Nintendo. © 2009 Nintendo. All Rights Reserved. Nintendo of Canada Ltd., Authorized User in Canada. Elements of the Wii console and the Wii Network Services are patent pending, both in the United States and internationally.To protect your health and safety, and for correct use of the Wii system, please read and follow the instructions in this operations manual before setup or use.Throughout this manual, you will see this symbol followed by WARNING or CAUTION. These terms have different levels of meaning:WARNING - Warns you about incorrect use of the Wii system that could result in serious personal injury.CAUTION - Cautions you about incorrect use of the Wii system that could result in personal injury or damage to the Wii system, components, game discs or accessories.IMPORTANT NOTE FOR PARENTS:Before allowing any child to use the Wii system, a parent or other responsible adult should determine whether the Wii system is appropriate for the child. Only children who are old enough and capable of wearing the wrist strap and properly gripping the Wii Remote Plus should use the system. You should also consider whether children should be supervised while playing games, connecting to the internet, and/or downloading games. Be sure to explain all safety and health information and instructions to any children who are going to use the system. Failure to do so may result in injuries or damage to the system or other property.ContentsFrançais – Page 37Español – Página 75The official seal is your assurance that this product is licensed or manufactured by Nintendo. Always look for this seal when buying video game systems, accessories, games and related products.Product recycling information:visit recycle.nintendo.comWii Operations Manual148Hx210W
2 3Some people (about 1 in 4000) may have seizures or blackouts triggered by light flashes or patterns, and this may occur while they are watching TV or playing video games, even if they have never had a seizure before.Anyone who has had a seizure, loss of awareness, or other symptom linked to an epileptic condition should consult a doctor before playing a video game.Parents should watch their children play video games. Stop playing and consult a doctor if you or your child has any of the following symptoms: Convulsions Eye or muscle twitching Loss of awareness Altered vision Involuntary movements DisorientationTo reduce the likelihood of a seizure when playing video games: • Sit or stand as far from the screen as possible. • Play video games on the smallest available television screen. • Do not play if you are tired or need sleep. • Play in a well-lit room. • Take a 10 to 15 minute break every hour.Health and Safety InformationHealth and Safety InformationWARNING - SeizuresPlaying video games can make your muscles, joints, skin or eyes hurt. Follow these instructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin irritation or eyestrain:• Avoid excessive play. Parents should monitor their children for appropriate play.• Take a 10 to 15 minute break every hour, even if you don't think you need it.• If your hands, wrists, arms or eyes become tired or sore while playing, or if you feel symptoms such as tingling, numbness, burning or stiffness, stop and rest for several hours before playing again.• If you continue to have any of the above symptoms or other discomfort during or after play, stop playing and see a doctor.WARNING - Repetitive Motion Injuriesand Eyestrain The Wii console and Wii Remote Plus can emit radio waves that can affect the operation of nearby electronics, including cardiac pacemakers.• Do not operate the Wii console or remote within 9 inches of a pacemaker.• If you have a pacemaker or other implanted medical device, do not use the Wii console or remote without first consulting your doctor or the manufacturer of your medical device.WARNING - Radio Frequency InterferenceThe Wii console is a Class I laser product. Do not attempt to disassemble the Wii console. Refer servicing to qualified personnel only.Caution: Use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure.Specifications:Laser Type: Semiconductor laser Laser wave length: 662nm (typ.)(647nm~687nm)Laser power: Max. 0.9mW Numeric aperture: 0.6CAUTION - Laser DeviceTo avoid electric shock when you use this system:• Do not use the Wii during a lightning storm. There may be a risk of electric shock from lightning.• Use only the AC Adapter that comes with your system.• Do not use the AC Adapter if it has damaged, split or broken cords or wires.• Make sure that the AC Adapter cord is fully inserted into the wall outlet or extension cord.• Always carefully disconnect all plugs by pulling on the plug and not on the cord. Make sure the Wii power button is turned OFF before removing the AC Adapter cord from an outlet.WARNING - Electric ShockCAUTION - Motion SicknessPlaying video games can cause motion sickness in some players. If you or your child feel dizzy or nauseous when playing video games, stop playing and rest. Do not drive or engage in other demanding activity until you feel better.Health and Safety InformationNOTE: This product does not contain latex.This product complies with applicable laws barring the use of toxic materials such as lead, mercury, cadmium, hexavalent chromium, PBB or PBDE in consumer products.IMPORTANT SAFETY INFORMATION – READ THE FOLLOWING WARNINGS BEFORE SETUP OR USE OF THE Wii. IF THIS PRODUCT WILL BE USED BY YOUNG CHILDREN, THIS MANUAL SHOULD BE READ AND EXPLAINED TO THEM BY AN ADULT. FAILING TO DO SO MAY CAUSE INJURY.PLEASE CAREFULLY REVIEW THE INSTRUCTION BOOKLET FOR THE GAME YOU ARE PLAYING FOR ADDITIONAL HEALTH AND SAFETY INFORMATION. Wii Operations Manual148Hx210W
4 5ComponentsComponentsComponentsPOWER ButtonPress to turn the console ON or OFF.NOTE: The Power LED does not go out when the power is turned off.USB ConnectorsConnects to USB devices, such as the Wii LAN Adapter (Sold separately).Nintendo GameCube Memory Card SlotsFor use with Nintendo GameCube Memory Cards.Battery CoverFor access to CR Coin Lithium battery (CR2032). Perchlorate Material – special handling may apply.More information can be found at http://www.dtsc.ca.gov/HazardousWaste/Perchlorate/index.cfm.Do not remove battery cover unless instructed to do so by a Nintendo Customer Service representative.Air IntakeNintendo GameCube Controller SocketsFor use with Nintendo GameCube Controllers.Air VentDo not block.AV Multi Out ConnectorConnects to the AV cable for your television.Sensor Bar ConnectorConnects to the Sensor Bar.DC Input ConnectorConnects to the Wii AC Adapter.Power LEDShows the status of the Wii console. Green - Console power is ON. Orange - Standby mode , WiiConnect24 is ON. Red - Standby mode, WiiConnect24 is Off.RESETPress to restart a game.SYNCHRO Button (SYNC.)Used when synchronizing a Wii Remote or Wii Remote Plus with the console. See pages 22-23.SD Card slotFor inserting an SD memory cards.See page 32.EJECT ButtonPress to eject a Wii or Nintendo GameCube Disc.Game Disc slotFor inserting a Wii or Nintendo GameCube Disc. Slot lights blue and blinks when a disc is inserted.When WiiConnect24 is set to ON, the slot will blink when messages or data are received.Slot ASlot B1234Wii Console Wii ConsoleWii Operations Manual148Hx210W
To take advantage of the features of the Nunchuk accessory, you must use Wii game software that supports Nunchuk gameplay features. Look for this icon on game packaging for games that are designed to be used with Nunchuk.6 7ComponentsComponentsComponentsPower ButtonPress to turn the Wii console ON or OFF.Pointer LensB ButtonStrap LockWrist StrapAttachmentWrist Strap cordBatteryCoverWii RemoteWrist StrapSee page 23 for information on wrist strap use.A ButtonMinus (–) ButtonHOME ButtonPress to display the HOME Menu screen. See page 64, Wii Operations Manual - Channel and Settings, for more information.Plus (+) ButtonSpeaker1 Button2 ButtonPlayer LEDsIndicate which player the remote is set up for.+Control PadWii Remote Plus(Shown with the included Wii Remote Jacket attached.)External ExtensionConnectorAllows connection of external accessories such as the Nunchuk.SYNCRO Button(SYNC.)Used when synchronizinga Wii Remote Plus with the console. See pages 24-25.Control StickNOTE: If the Control Stick is moved out of neutral position when the Wii power is turned ON, or when connecting to the remote, that position will be set as neutral position, causing incorrect game control during game play. To reset the Control Stick, allow it to return to the normal neutral position, then simultaneously hold down the A, B, Plus (+) and Minus (–) buttons on the remote for three seconds.To avoid this from occurring, do not move the Control Stick when:• Turning the Wii console on• Plugging the Nunchuk into the Wii Remote Plus• Starting Channels from the Channel Menu• Returning to the Wii Menu from games or ChannelsNunchuk PlugConnects to the External Extension Connector on the Wii Remote Plus.Connector HookInsert the cord of the wrist strap through the hook.C ButtonZ ButtonLock/Release LeversSqueeze levers to remove plug from Wii Remote Plus.Sensor Bar PlugPlugs into the Sensor Bar Connector on the back of the Wii console.See pages 13-17 for installation instructions.Nunchuk Sensor BarSensor Bar StandSee page 16 for installation instructions.Wii Operations Manual148Hx210W
8 9ComponentsComponentsComponentsAC PlugConnects to a 120V AC wall outlet.DC PlugConnects to the DC Input connector on the back of the Wii console.AV Multi Out PlugPlugs into the AV Multi Out connector on the back of the Wii console.RCA PlugsPlug into the AV input connectors on a television.VideoAudio (Left)Audio (Right)Wii AC AdapterWii AV CableWii Console StandWii Stand PlateWii Console Stand and Wii Stand PlateNOTE: The Wii Console Stand and Wii Stand Plate come already assembled together, as shown below.NOTE: If these components become separated, please see page 11 for assembly instructions.Wii Operations Manual148Hx210W
Wii Console Usage PrecautionsPlease read and follow the precautions listed below whensetting up and using the Wii console. Failure to do somay result in damage to your Wii system or accessories.• Do not use any AC Adapter other than the one provided with your system.• The console has intake and exhaust vents designed to maintain adequate ventilation. Do not operate the console in any location where these vents may become covered or obstructed, for example, on carpet or in a tightly enclosed space. Keep vents clear of any dust or other foreign material.• Do not disassemble or try to repair the Wii console, accessories or components. Doing so voids your warranty.• After you have finished playing, be sure to remove the Game Disc from the console.• Do not store the Wii console in a humid place, on the floor, or in any location where it may collect dirt, dust, lint, etc.• Do not drop, hit or otherwise abuse the Wii console, components or accessories.• When disconnecting any plugs from the console or wall outlet, first turn the Wii console off. Then carefully pull by the plug itself rather than by the cord.• Do not step on, sharply pull or bend any wire or cables.• Do not expose the Wii console, components or accessories to extreme heat or cold.• Do not spill any liquids on the Wii console, components or accessories. To clean, use a soft slightly damp cloth. Use water only. Allow to dry completely before using. Vertical Horizontal10 11System SetupSystem SetupWii Console PlacementNOTE: Choose a location to set up the console that has enough room to allow for free flow of ventilation around the console. The Wii console can be placed in a vertical or horizontal position. If located in a vertical position, it should be placed in the Wii console stand.The console can be damaged if knocked over, especially if this occurs during operation of the disk drive. The Wii stand plate has been included to increase stability of the Wii console, and should be used if the console is placed in a vertical position.CAUTION - Console Damage1. Attach the Wii stand plate to the bottom of the console stand by inserting the prongs into the slots as shown above.2. Firmly slide the stand plate into slots in the direction shown.3. Place the console stand on a flat surface and place the console into the stand. Lower the console straight down into the console stand rather than sliding it in from the front. Horizontal PlacementPlace the Wii console on a flat horizontal surface. Retain the Wii console stand and stand plate for future use in case you want to switch the orientation of the console.System Setup Vertical Placement (NOTE: These components come already assembled. If they become separated, see instructions below to reattach.)Wii Operations Manual148Hx210W
12 13System SetupSystem SetupSystem SetupWii Console TV InputsConnecting the AV CableIMPORANT: The Wii console will not work with any AV cable other thanthe model supplied with your Wii system or the component video cable listed below. NOTE: For higher quality video, the Wii component video cable(Model No. RVL–011) can be ordered through Nintendo’s web site at support.nintendo.com (USA/Canada only) or by calling Customer Serviceat 1-800-255-3700. Before ordering, check to make sure your TV has component video inputs.1. Insert the AV Multi Out plug on the Wii AV Cable into the AV Multi Out connector on the back of the console.2. Insert the RCA plugs on the Wii AV Cable into the input connectors on the TV, VCR or other audio equipment.VIDEO AUDIO L AUDIO RSensor Bar mountedabove the screen.Sensor Bar mountedbelow the screen.Sensor Bar Setup Connecting the Sensor BarInsert the Sensor Bar plug into the Sensor Bar connector on the back of the console. Placing the Sensor BarThe Sensor Bar can be placed either above or below the TV screen.• See page 14 for instructions on mounting the Sensor Bar to the top of the TV.• See page 15 for instructions on mounting the Sensor Bar below the TV screen.CAUTION - TV Screen DamageSome televisions can be damaged by the display of a stationary image, because the image may be permanently "burned" into the screen. Playing video games with stationary images or patterns, or leaving video games on hold or pause, may lead to this type of damage. When taking a break, place the game on pause and turn the TV off until you are ready to play again.Before using your Wii system with any TV, especially front and rear projection or plasma models, be sure to review all documentation included with your TV to find out whether video games can be played on the TV without damaging it.If in doubt, contact the manufacturer of the TV. Neither Nintendo nor any of Nintendo's licensees will be liable for any damage to your TV.Wii Operations Manual148Hx210W
System Setup14 15System SetupSystem Setup Mounting the Sensor Bar Above the Screen1. Remove the protective film from the foam pads on the bottom of the Sensor Bar.• The front of the Sensor Bar should be aligned close to the front of the TV.• The center of the Sensor Bar should be aligned with the center of the TV.2. For additional stability, you can add adhesive backed foam tape from the supplied sheet.3. Mount the Sensor Bar to the top of the TV. Mounting the Sensor Bar Below the Screen1. Remove the protective film from the foam pads on the bottom of the Sensor Bar.2. For additional stability, you can add adhesive backed foam tape from the supplied sheet.3. Mount the Sensor Bar to the front edge of the surface the TV is sitting on. Do not place the Sensor Bar below the surface that the TV is sitting on; for example, on shelves below the TV.• The center of the Sensor Bar should be aligned with the center of the TV.• The front of the Sensor Bar should be aligned with the front of the surface the TV is sitting on.Wii Operations Manual148Hx210W
120 V AC outletDC Input ConnectorWii AC Adapter1. Insert the DC plug on the Wii AC Adapter cord into the DC input connector on the back of the console.2. Insert the AC plug into a 120V AC wall outlet. Make sure the power is off (the Power LED is red) when unplugging the AC Adapter.CAUTION: To prevent electric shock, match the wide blade of the plug to the wide slot and insert fully into outlet. Sensor Bar cable positionIf desired, the Sensor Bar cable can be fed through a channel on the bottom of the Sensor Bar to orient the cable to the left or right.NONO NOYES Using the Sensor Bar StandCommunication between the Wii Remote Plus and the Sensor Bar may be improved in some situations by mounting the Sensor Bar on the Sensor Bar stand; for example, if the TV is sitting on the floor.Be sure to:• Align the center of the Sensor Bar with the center of the TV.• Align the front of the Sensor Bar with the front edge of the TV, or with the front edge of the surface that the TV is sitting on.System SetupSystem SetupSystem Setup16 171. Remove the protective film from the foam pads on the bottom of the Sensor Bar stand.2. For additional stability, you can add adhesive backed foam tape from the supplied sheet. These can be applied to both the top and bottom of the stand.3. If you are using the extra foam tape, remove the protective film from the piece on the top of the Sensor Bar stand.The Sensor Bar Stand can also be used on top of the TV if part of the TV blocks, or prevents proper installation of, the Sensor Bar.Make sure the Sensor Bar is horizontal and it is not blocked by the TV.4. Attach the Sensor Bar stand to the Sensor Bar, aligning the pegs on the stand with the holes in the bottom of the Sensor Bar.5. Mount the Sensor Bar stand to:• the front edge of the surface the TV is sitting on, or• to the top of the TV.Do not place the Sensor Bar stand below the surface that the TV is sitting on; for example, on shelves below the TV.Wii Operations Manual148Hx210W
Wii Remote Jacket18 19System SetupSystem SetupSystem SetupWARNING - Battery LeakageTV and Audio/Video SettingsAfter you have completed all steps of the setup procedure and are ready to use the Wii system, you will need to set the appropriate "input select" setting for your TV, VCR or other audio equipment.1. Turn ON the power for your TV and any audio equipment connected to your gameplay setup and the power on the Wii console.2. Select the correct input setting for your TV (see Input Select Information at right).3. The Wii Menu (see below) should appear on the TV screen. See the Wii Menu section of the Operations Manual - Channels and Settings, for more information on this feature.If the Wii Menu screen does not appear, check to make sure your input setting is correct and review the Troubleshooting section on pages 33-34. Input Select InformationThe input select allows you to switch between the different inputs on your TV or VCR.Manufacturers of TVs and VCRs use different names and locations for "input select.” The common names for the input select are: input, select, input select, line, line in, source, in, EXT, and AUX. Consult your TV or VCR instruction manual for details.NOTE: More information on "Input Select" is available on our web site at support.nintendo.com/consumer/inputselects.htmlLocate the input select for the component that the Wii AV Cable is connected to (either the TV or VCR). The most common locations for input select are:• A button on the front of the TV or VCR.• A button on the remote control.• A high-numbered or low numbered channel (92, 99, 00, or 02) on the TV or VCR.• An on-screen menu selection.Setup of the Wii Remote PlusThe Wii Remote Plus comes with the Wii Remote jacket installed.• Be sure that the Wii Remote jacket is installed during gameplay to reduce the risk of harm to the remote, surrounding objects, or people. • It may be necessary to remove the Wii Remote jacket – for example, to replace the batteries in the Wii Remote Plus. If you do remove the Wii Remote jacket, be sure to replace it before further play. Installing BatteriesThe Wii Remote Plus uses AA batteries. Nintendo recommends high quality alkaline batteries for best performance and longevity of battery life. If you use rechargeable nickel metal hydride (NiMH) batteries, be sure to follow the manufacturer’s guidelines for safety and proper usage.Leakage of battery fluid can cause personal injury as well as damage to your remote.If battery leakage occurs, thoroughly wash the affected skin and clothes. Keep battery fluid away from your eyes and mouth. Leaking batteries may make popping sounds.To avoid battery leakage:• Do not mix used and new batteries (replace all batteries at the same time).• Do not mix different brands of batteries.• Nintendo recommends alkaline batteries. Do not use Lithium ion, nickel cadmium (nicad), or carbon zinc batteries.• Do not leave batteries in the remote for long periods of non-use.• Do not recharge alkaline or non-rechargeable batteries.• Do not put the batteries in backwards. Make sure that the positive (+) and negative (-) ends are facing in the correct directions. Insert the negative end first. When removing batteries, remove the positive end first.• Do not use damaged, deformed or leaking batteries.• Do not dispose of batteries in a fire.See page 20 for instructions on removing the Wii Remote jacket and installing batteries.Wii Operations Manual148Hx210W
20 21System SetupSystem SetupSystem Setup Wearing the Wii Remote Wrist Strap1. Open the lever on the strap lock and place your hand through the wrist strap. Hold the remote firmly in your hand.2. Slide the strap lock up so that the strap will not fall off your wrist. Do not over tighten the strap lock so that it’s uncomfortable. It should just be tight enough to hold the wrist strap in place. Close the lever to hold the strap lock in place.Wii gameplay with the Wii Remote Plus can involve rapid or vigorous motion. Please use the wrist strap to prevent losing your grip on the remote and causing damage to the remote or surrounding objects, or injury to other people.WEAR THE WRIST STRAP WHEN USING THE Wii REMOTE PLUS.• Make sure all players use the wrist strap and that the strap lock is correctly tightened. • When sharing the Wii Remote Plus between multiple players, make sure each person uses the wrist strap properly.• Wearing the wrist strap will prevent you from accidentally dropping or throwing the remote during gameplay, which could damage the remote or surrounding objects, or cause injury to other people.DO NOT LET GO OF THE REMOTE DURING GAME PLAY.• Read the Instruction booklet for the game you are playing and follow all game control instructions for correct use of the Wii Remote Plus or accessory controllers.• Hold the remote securely and avoid excessive motion, as it may cause you to let go of the remote and may break the wrist strap.• If your hands become moist, stop and dry your hands.ALLOW ADEQUATE ROOM AROUND YOU DURING GAME PLAY.• Stay at least three (3) feet away from the television.• As you may move around during gameplay, make sure objects and other people are out of your range of movement or arm motion to prevent damage or injury.CAUTION - Use the Wrist Strap Installing Batteries (cont.)1. Pull the Wii Remote jacket off the base of the Wii Remote Plus and pull the wrist strap out of the hole in the bottom of the jacket.2. Pull the jacket up the remote far enough to expose the entire battery door and remove the door.3. Insert the batteries into the battery chamber. Be sure to insert the minus (–) end first when inserting new batteries, and remove the plus (+) end first when replacing the batteries.4. Replace the battery cover, thread the wrist strap through the hole in the bottom of the jacket and pull the jacket back over the bottom of the remote.5. If you remove the jacket from the remote, replace it by inserting the top of the remote into the large hole on the front of the jacket. Be sure to push it all the way into the inside of the jacket.6. Thread the wrist strap throught hole in the bottom of the jacket, as shown in step 4, above.7. Insert the connector cover into the External Extension Connector on the bottom of the remote.NOTE: Battery life can be checked by pressing the Home Button. See pages 64-65, Wii Operations Manual - Channels and Settings, for more information.Wii Operations Manual148Hx210W
1P 2P 3P 4PMORE LESSBattery Life22 23System SetupSystem SetupSystem SetupSynchronizing Your Wii Remote Plus with the Wii ConsoleThis procedure allows the Wii Remote or Wii Remote Plus to communicate withthe console.The Wii Remote Plus included with your Wii system has been synchronized with the console at the factory. There are two different modes of synchronizing (syncing) a Wii Remote or Wii Remote Plus with your console:STANDARD MODE – The Standard Mode procedure is used when adding additional remotes to your system or if you want to re-synchronize your original remote. Once synchronized, the remote will stay synced to the console unless you overwrite this setting by syncing the remote to a different console.ONE TIME MODE – This mode allows you to temporarily use your remote on a console other than your own or to use a friends remote on your console. It does not delete the Standard Mode setting stored in the remote. In this mode, the remote will only communicate with the console while the power is on. When the power is turned off the remote will lose its sync with the console.• Only a Wii Remote or Wii Remote Plus in Standard Mode can turn the console power ON or OFF. Standard Mode SynchronizationNOTE: Make sure you have placed batteries in the Wii Remote Plus.1. Press the Power button on the Wii console to turn it on.2. Remove the battery cover on the back of the remote. Press and release the SYNC. button inside the cover. The Player LEDs will blink.3. Open the SD Card Slot cover on the front of the Wii console. Press and release the SYNC. button on the inside of the compartment4. When the Player LED blinking stops, connection is complete. The LED that is illuminated indicates the player number.This procedure must be followed for each additional remote added toyour system.NOTE: With Standard Mode Synchronization, you can synchronize up to 10 Wii Remote or Wii Remote Plus controllers with your Wii console. The dataof the remote that was sychronized first is deleted if you synchronize more than 10. One Time Mode SynchronizationNOTE: This mode temporarily removes the Standard Mode synchronization setup for all remotes until the power of the Wii console is turned off. When the power is turned back on again, the Standard Mode settings will return.1. Press the HOME Button on a remote that is synchronized with the console.2. Select the Wii Remote Settings option from the Home Button menu, then select the Reconnect option.3. Press the 1 and 2 Buttons simultaneously on the remote that you want to synchronize with the console.The order in which you synchronizeremotes will set the player order formultiplayer games.4. The Player LEDs will blink during the syncing process. When the blinking stops, the connection is complete. See diagram at right for a description of what the blinking indicates.NOTE: One Time Mode synchronization is temporary. The Wii Remote or Wii Remote Plus will lose this synchronization under the following conditions:• When you turn off the console by pressing the Power Button on either the remote or the console.• When starting up a game or Channel from the Wii Menu.• When returning to the Wii Menu after exiting from a game or Channel.• When you select Reset on the HOME Menu screen.• When you press the Reset Button on the front of the console.IMPORTANT: IF YOUR REMOTE LOSES IT’S SYNCHRONIZATION WITH THE CONSOLE AND YOU ARE UNABLE TO RE-SYNC IT, REVIEW THE Wii REMOTE PLUS TROUBLE-SHOOTING PROCEDURES ON PAGE 34After the syncing process, LED that is lit shows the player number for that remote.During the syncing process, the number of LEDs that blink will show the battery life of the remote that is being synchronized.Wii Operations Manual148Hx210W
For best operation, play directly in front of the TV. Recommended distance: 3’– 10’(from Sensor Bar to Wii Remote Plus)24 25Using Game DiscsUsing Game DiscsWii System Play GuidelinesPlaying a Wii or Nintendo GameCube Game Disc Before Inserting a Disc• Turn ON the power for your TV and any audio equipment connected to your gameplay setup.• Select the correct input setting for your TV. (See page 18, TV and Audio/Video Settings.) Insert a Game DiscInsert your Game Disc into the Game Disc slot on the front of the console. The Wii console will turn ON automatically.• If your console is placed vertically, the disc label will face to the right.• If your console is placed horizontally, the disc label will face upwards. Starting the Game1. Using the Wii Remote Plus, move the cursor over the Disc Channel option on the Wii Menu screen and press the A Button to make a selection.NOTE: Please read the Disc Channel section in the Operations manual included with your Wii system for complete informa-tion on using Game Discs in the Wii console.2. Select “PLAY” on the game title screen to begin the game. Review the instruction booklet for the game you are playing for specific game information.Game Disc Usage PrecautionsPlease read and follow the precautions listed below when using Wii or GameCube Game Discs in the Wii Console. Failure to do so may result in damage to your Wii system or game discs.• To avoid pinching your finger, do not load the disc with your finger in the hole. Always handle the disc by the edges.• Do not touch the bottom unprinted surface of the Game Disc. Always handle the disc by the edges.• Do not use cracked, deformed or repaired discs.• Do not bend or put excessive pressure on discs when loading into console.• Do not leave discs in direct sunlight or expose them to high temperatures, high humidity or dust, dirt or other contaminates.• When not using discs, store them in their cases to prevent them from getting scratched, dirty or damaged.• Do not write on, or place stickers on any part of the disc.• If a disc becomes dirty or contaminated with fingerprints, the system may not be able to read the game data correctly. If necessary, clean the disc with a soft, slightly damp cotton cloth (use water only). Clean the disc from center towards the edges; do not use a circular motion.Wii System Play GuidelinesCAUTION - Adequate Space RequiredBe sure you have enough space around you during game play.To avoid injury or damage, make sure other people or objects are not within your range of motion. For best results when using the Wii system, follow these recommendations. For best use of the Wii Remote Plus, follow these guidelines:• Avoid blocking the signal between the remote, the Sensor Bar and the Wii console with objects.• Use the remote the correct distance from the Sensor Bar. The optimal distance is between 3 and 10 feet.• Avoid bright light sources, including sunlight, behind or near the TV, shining towards the remote or reflecting off of the screen.• Avoid highly reflective surfaces near the Sensor Bar.• Avoid sources of infrared light in the gameplay area such as electric, propane or kerosene heaters, flames from fireplaces or candles, and stoves or other sources of heat.• If the remote seems to operate eratically, check and adjust the Sensor Bar sensitivity if necessary. (See page 52 in the Wii Operations Manual - Channels and Settings.)Be sure to read the following pages on using the Wii Remote Plus, Nunchuk, and Nintendo GameCube controllers before using the Wii system.NOTE: A GameCube controller is required for playing GameCube games.Wii DiscNintendo GameCube DiscLabel facestowards theright side of theWii consoleLabel facestowards theright side of theWii consoleWii Operations Manual148Hx210W
Wii Remote Plus –Vertical PositionWii Remote Plus and NunchukWii Remote Plusand Classic Controller Pro™ (sold separately)Wii Remote Plus – Horizontal Position26 27Using the Wii Remote PlusUsing the Wii Remote PlusUsing the Wii Remote PlusWii Remote Plus ConfigurationsDepending on the game, the way you hold and operate the remote will vary. You may need to hold the remote in either one or two hands. Read the instruction booklet for the game you are playing for information about what kind of gameplay control is required for that game.The remote can be used by itself, or in different configurations when connected up to other Wii accessories. These configurations can be used right or left handed.Basic Operations PointPoint the remote at a specific place on the TV screen. WavingWave the remote back and forth from side to side Pushing or PullingMove the remote forward and backward. TwistingMove the remote in a twisting motion by rotating your arm. Holding or GrabbingPoint the remote at a specific place on the TV screen and move the remote while holding down a button.Wii Operations Manual148Hx210W
Lock/Release LeversSqueeze levers to remove plug from Wii Remote Plus.28 29Using the NunchukUsing the NunchukUsing the NunchukSetup and Use of the NunchukWii gameplay with the Wii Remote Plus and Nunchuk can involve rapid or vigorous motion. Please use the wrist strap to prevent losing your grip on the remote and causing damage to the remote and surrounding objects, or injury to other people.Be sure to install the Nunchuk as described. Use the connector hook on the Nunchuk plug with the wrist strap cord to prevent the Nunchuk plug from becoming separated from the External Extension connector on the remote and striking objects or people. 2. Insert the Nunchuk plug into the External Extension Connector on the bottom of the remote until it “clicks” into place. IMPORTANT: Make sure the wrist strap cord runs through the connector hook. Connecting the Nunchuk1. Feed the cord on the wrist strap through the connector hook. Disconnecting the NunchukPress the Lock/Release Levers on the sides of the Nunchuk plug and pull the plug straight out of the External Extension Connector on the bottom of the remote.3. Open the lever on the strap lock and place your hand through the wrist strap. Hold the remote firmly in your hand. Slide the strap lock up so that the strap will not fall off your wrist. Do not over tighten the strap lock so that it’s uncomfortable. It should just be tight enough to hold the wrist strap in place. Close the lever to hold the strap lock in place. Holding the Nunchuk and Wii Remote PlusConnector HookCAUTION - Use the Wrist StrapWii Operations Manual148Hx210W
Nintendo GameCubeController30 31Using Nintendo GameCube ControllersUsing Nintendo GameCube ControllersUsing Nintendo GameCube ControllersSetup of Nintendo GameCube ControllersNOTE: When using GameCube controllers with the Wii console, be sure and use the stand plate to help prevent the console from being tipped over by pulling on the controller cable. (See page 11, Vertical Placement.)Optionally, the console can be placed horizontally. When using GameCube Controllers in the horizontal position, the controller socket cover can be removed to allow the console to lay flat. See page 31 for instructions on removing the cover. Connecting GameCube ControllersNOTE: GameCube controllers only work when playing GameCube games on theWii console.• Plug the controllers into the GameCube controller sockets on the side of the console.• Review the instruction booklet for the game you are playing for the number and position of controllers required for that specific game.• The Classic Controller™ does not work with GameCube games. Removing the Controller Socket CoverIf you are using the Wii console in a horizontal position, you must remove the controller socket cover when using GameCube Controllers to allow the console to lay completely flat.1. Stand the Wii console upright as shown and squeeze gently until you feel a slight click.2. Remove the cover by pulling straight up out of the console. 3. The cover can be replaced by reinserting the cover straight down into the console until it clicks into place.NOTE: The GameCube Memory Slot Cover can be removed with the same procedure, and should be removed if you are using GameCube Memory Cards when the Wii console is placed horizontally.HorizontalPositionPress inand upUse the Wii stand plate when using GameCube controllers to prevent the console from tipping over.Wii Operations Manual148Hx210W
miniSD cardand AdaptermicroSD cardand AdapterSD cardNote:Label facestowards the Wiigame disc slot No picture on TV screen• Make sure you have completed all steps, in the order that they appear, on the Quick Setup sheet included with your system.• Make sure that all components of your setup are plugged into power outlets and that all components are turned ON.• Make sure that cable connections are correctly installed and that all plugs are securely plugged into the appropriate connectors.• Make sure that the INPUT settings are correct for your particular setup. (Review page 18 on Input Select information.) No sound is heard or sound quality is poor• Make sure the TV volume is not turned off or muted.• Make sure that all audio connections are correctly installed and that all plugs are securely plugged into the appropriate connectors.• Make sure the Wii AV Cable is plugged into the "input" connectors on the TV or VCR, not the "output" connectors.• Make sure that the INPUT settings are correct for your particular setup. (Review page 18 on Input Select information.)• The sound in some games doesn't begin until the game begins.• If you have a mono TV or VCR and have left one of the audio cables unconnected you may not get all game sounds. Use a "Y" Adapter to get both left and right sound channels.• If your TV/VCR have both mono and stereo options, make sure they match your setup.• Check the instruction booklet for the game you are playing to see if there are volume controls or mono/stereo options that can be set from within the game. The console Power LED does not come on, or goes off during game play• Make sure the AC Adapter is plugged into both the wall outlet and the back of the console.• If the light is still off, disconnect the AC Adapter plug from the wall outlet, wait 2 minutes and plug it back into the outlet. Turn the console power ON. System unable to read disc or game disc will not operate in consoleNOTE: Game Discs will not start automatically. You must start disc games from the Disc Channel on the Channel Menu screen.• Make sure the disc is inserted correctly. The label side of the disc must face to the right if the Wii console is set up vertically, or must face up if the Wii console is set up horizontally.• Check to be sure that the Game Disc is clean and in good condition. If dirty, wipe with a soft cloth, from the center to the outside. Do not wipe with a circual motion. You can also try using the Wii Lens Cleaning Kit (sold separately) to clean the internal lens.• Eject the Game Disc, and turn the power OFF and then ON. Reinsert the disc and try playing the game again.• Check that the Game Disc will work on your version of the Wii. This system will only work with Game Discs made for use in the USA, Canada, Mexico and Latin America. Game Disc slot does not light blue or lights briefly.This is the normal operation of the Game Disc slot. The slot only lights temporarily when the system is turned on by a) inserting a Game Disc, b) using the Power Button on the Wii Remote Plus or c) using the Power Button on the Wii console.The Game Disc slot will also light temporarily if you receive a message via WiiConnect24 (this feature must be turned on to receive messages, see page 62 in the Wii Operations Manual - Channels and Settings for more information). Troubleshooting (Before seeking assistance, review the following problems and solutions.)Troubleshooting32 33Using Memory CardsUsing Memory Cards Using SD Memory CardsSD cards are used in many digital cameras and cell phones and for data storage on PCs. The Wii console accepts only SD or SDHC cards (32 GB maximum), including miniSD or SDHC and microSD or SDHC cards when used with their respective adapters.An SD memory card can be used to store the following data from the Wii system memory:• Game save information from Wii games (depending on the game, some information cannot be copied to SD cards)• Certain data from the Wii Channel applications• Games downloaded through the Wii Shop Channel such as Virtual Console™ and WiiWare™ games• Add-on content downloaded within a gameNOTE: Games and add-on content copied to an SD card cannot be used with a different Wii console.To use an SD card, open the SD card slot cover on the front of the console and insert the SD card until it clicks into place.See the SD Card Menu and Photo Channel sections in the Wii Operations Manual - Channels and Settings for more information on using SD cards with the Wii system. Using Nintendo GameCube Memory CardsNOTE: Nintendo GameCube Memory cards can only be used to save game information for Nintendo GameCube Game Discs.To use a Nintendo GameCube Memory card, open the slot cover and insert the memory card as shown below.Note: Label facestowards the top orright side of theWii console.If purchasing a new SD card, a list of cards that have been tested to work with the Wii console can be found in the Wii - Systems and Accessories section of http://support.nintendo.comCAUTION: Do not insert or remove memory cards when reading or writing information to or from the card or initializing the card. Doing so may damage the Wii console or memory card, or permanently destroy data. Can’t get past the Language Select screen• Synchronize your Wii Remote Plus controllers using the procedure on page 22.• Review the Sensor Bar setup instructions on pages 13-16 to ensure proper placement and installation.Wii Operations Manual148Hx210W
Wii Remote Plus lights blink, but don’t stay lit (remote does not sync)• Review the Sensor Bar setup instructions in this manual to ensure proper placement.• Make sure batteries are not depleted.• Try resetting the Wii Remote Plus - remove the batteries, wait one minute, then replace the batteries. Wait a few seconds, and then try synchronizing the remote again.• If you are unable to re-sync the remote, try the following procedure: 1. Turn off the power of the Wii console with the POWER Button on the front of the console. 2. Unplug the power cord from the wall outlet for a few seconds, then plug it back in again. 3. Turn on the power of the Wii console. 4. When you see the Health and Safety screen, press and hold the SYNCHRO Button on the console down for 15 seconds. This will clear any sync information left on the console. 5. Synchronize your Wii Remote Plus controllers using the procedure on page 22. Wii Remote Plus or controller accessory buttons stickClean sticking buttons using the following procedure:1. For the Wii Remote Plus, remove batteries and disconnect any accessories before cleaning.2. Use an unused toothbrush and hot tap water. Do not use boiling water, soap or detergent.3. Dip the toothbrush in hot water and shake off excess amount. Lightly scrub sticking buttons, working the bristles around sides of buttons and into cracks.4. Dry controller with soft cloth or towel and let air dry for at least 2 hours.5. Test buttons and repeat procedure if necessary. Do not submerge in, or pour any type of liquid onto a controller or accessory. Wii Remote Plus doesn't properly respond to player motion (erratic hand cursor, can’t swing bat, can’t bowl, etc.)• If the lights on your remote blink, but do not stay lit, see the first troubleshooting step on this page, at left.• Review the Sensor Bar setup instructions in this manual to ensure proper placement.• Make sure no objects are blocking the signals between the Sensor Bar, the Wii console, and the Wii Remote Plus.• Make sure batteries are not depleted.• Use the Sensor Bar Stand if the Sensor Bar is located below under the TV.• Check and adjust the Sensor Bar sensitivity if necessary. (See page 52 in the Wii Operations Manual - Channels and Settings.)The following conditions can interfere with the operation of the remote: 1. Using the remote too close or too far from the Sensor Bar. The optimal distance is between 3 and 10 feet. 2. Bright light sources, including sunlight, behind or near the TV, shining towards the remote or reflecting off the TV screen. 3. Highly reflective surfaces near the sensor bar. 4. Sources of infrared light in the gameplay area such as electric, propane or kerosene heaters, flames from fireplaces or candles, and stoves or other sources of heat. 5. Radio frequency interference may cause the Wii Remote Plus to work erratically. Check for and move or turn off wireless devices such as cordless phones, wireless computer keyboards or mice or other similar devices.If you think any of these conditions are affecting the operation of the remote, try removing or reducing the source of interference.TroubleshootingFCC Information34 35TroubleshootingFCC InformationRegulations for Equipment Use in U.S.A. and CanadaFCC and Industry Canada InformationIn order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled exposure, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this device.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician or call Nintendo Consumer Service at 1-800-255-3700 for assistance.The user may find the following booklet prepared by the Federal Communications Commission helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.The term IC before the certification/registration number only signifies that the Industry Canada technical specifications were met.If your Wii system still does not operate correctly after trying the troubleshooting steps, DO NOT return the console to the store. You will lose saved game data and all Wii Shop Channel downloads and Wii Points.Visit support.nintendo.com for assistance and additional troubleshooting and repair options or call 1-800-255-3700. When playing a game that includes Wii MotionPlus features, the Wii Remote Plus operates erratically or unexpectedly.• The Wii Remote Plus may need to be recalibrated due to the following: 1. Changing batteries in the Wii Remote Plus during gameplay. 2. Moving Wii MotionPlus from a cold environment into a warm environment.To recalibrate the Wii Remote Plus, place it on a flat horizontal surface with the buttons facing down. It should be 20” or more from your television and Wii console for correct calibration. Wait for a few seconds and check the operation. Also, review the instruction manual for the game you are playing for more information.NOTE: This procedure must be done during gameplay.Wii Operations Manual148Hx210W

Navigation menu