Nintendo Co RVL036 Wii Remote Plus User Manual

Nintendo Co Ltd Wii Remote Plus Users Manual

UserManual.wiki >

Nintendo Co >

RVL036 User Manual HTML Version

Users Manual

Wii Console Manual

148Hx210W

Wii Operations Manual

System Setup

PRINTED IN CHINA

MAA-RVL-S-USZ-C0

NINTENDO OF AMERICA INC.

P.O. BOX 957, REDMOND, WA

98073-0957 U.S.A. 61914I

NEED HELP WITH INSTALLATION,

MAINTENANCE OR SERVICE?

Nintendo Customer Service

SUPPORT.NINTENDO.COM

or call 1-800-255-3700

BESOIN D’AIDE POUR L’INSTALLATION,

L’ENTRETIEN OU LA RÉPARATION?

Service à la Clientèle de Nintendo

SUPPORT.NINTENDO.COM

ou composez le

1-800-255-3700

¿NECESITAS AYUDA DE INSTALACION,

MANTENIMIENTO O SERVICIO?

Servicio al Cliente de Nintendo

SUPPORT.NINTENDO.COM

o llame al 1-800-255-3700

Health and Safety Information 2-3

System Components

Wii Console 4-5

Wii Remote™ Plus 6

Nunchuk™ 7

Sensor Bar 7

Wii AC Adapter 8

Wii AV Cable 8

Wii Console Stand & Stand Plate 9

System Setup

Wii Console 10-11

Wii AV Cable 12

Sensor Bar 13-16

Wii AC Adapter 17

TV and Audio/Video Settings 18

Setup of Wii Remote Plus 19-21

Synchronizing Your Wii Remote Plus and Wii Console 22-23

Using Game Discst 24

Wii System Play Guidelines 25

Using the Wii Remote Plus 26-27

Using the Nunchuk 28-29

Using Nintendo GameCube™ Controllers 30-31

Using Memory Cards 32

Troubleshooting 33-34

FCC Information 35

Warranty and Service Information 36

NOTE: This product only plays Wii Game Discs and Nintendo GameCube™ Game Discs

labeled with “For use only in USA, Canada, Mexico and Latin America”. This product

does not play CD or DVD discs. This Wii console is for use only in the United States,

Canada, Mexico or Latin America.

Nintendo of Canada Ltd., Authorized User in Canada. Elements of the Wii console and the Wii

Network Services are patent pending, both in the United States and internationally.

To protect your health and safety, and for correct

use of the Wii system, please read and follow the

instructions in this operations manual before setup

or use.

Throughout this manual, you will see this symbol followed by WARNING or

CAUTION. These terms have different levels of meaning:

WARNING - Warns you about incorrect use of the Wii system that could result in

serious personal injury.

CAUTION - Cautions you about incorrect use of the Wii system that could result in

personal injury or damage to the Wii system, components, game discs or accessories.

IMPORTANT NOTE FOR PARENTS:

Before allowing any child to use the Wii system, a parent or other

responsible adult should determine whether the Wii system is appropriate

for the child. Only children who are old enough and capable of wearing the

wrist strap and properly gripping the Wii Remote Plus should use the system.

You should also consider whether children should be supervised while

playing games, connecting to the internet, and/or downloading games. Be

sure to explain all safety and health information and instructions to any

children who are going to use the system. Failure to do so may result in

injuries or damage to the system or other property.

Contents

Français – Page 37

Español – Página 75

he official seal is your assurance

that this product is licensed or

manufactured by Nintendo.

Always look for this seal when

buying video game systems,

accessories, games and related

products.

Product recycling information:

visit recycle.nintendo.com

Wii Operations Manual

148Hx210W

2 3

Some people (about 1 in 4000) may have seizures or blackouts triggered by light

flashes or patterns, and this may occur while they are watching TV or playing video

games, even if they have never had a seizure before.

Anyone who has had a seizure, loss of awareness, or other symptom linked to an

epileptic condition should consult a doctor before playing a video game.

Parents should watch their children play video games. Stop playing and consult a

doctor if you or your child has any of the following symptoms:

Convulsions Eye or muscle twitching Loss of awareness

Altered vision Involuntary movements Disorientation

To reduce the likelihood of a seizure when playing video games:

• Sit or stand as far from the screen as possible.

• Play video games on the smallest available television screen.

• Do not play if you are tired or need sleep.

• Play in a well-lit room.

• Take a 10 to 15 minute break every hour.

Health and Safety Information

WARNING - Seizures

Playing video games can make your muscles, joints, skin or eyes hurt. Follow these

instructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin

irritation or eyestrain:

• Avoid excessive play. Parents should monitor their children for appropriate play.

• Take a 10 to 15 minute break every hour, even if you don't think you need it.

• If your hands, wrists, arms or eyes become tired or sore while playing, or if you feel

symptoms such as tingling, numbness, burning or stiffness, stop and rest for

several hours before playing again.

• If you continue to have any of the above symptoms or other discomfort during or

after play, stop playing and see a doctor.

WARNING - Repetitive Motion Injuries

and Eyestrain The Wii console and Wii Remote Plus can emit radio waves that can affect the

operation of nearby electronics, including cardiac pacemakers.

• Do not operate the Wii console or remote within 9 inches of a pacemaker.

• If you have a pacemaker or other implanted medical device, do not use the

Wii console or remote without first consulting your doctor or the

manufacturer of your medical device.

WARNING - Radio Frequency Interference

The Wii console is a Class I laser product. Do not attempt to disassemble the Wii

console. Refer servicing to qualified personnel only.

Caution: Use of controls or adjustments or procedures other than those specified

herein may result in hazardous radiation exposure.

Specifications:

Laser Type: Semiconductor laser Laser wave length: 662nm (typ.)(647nm~687nm)

Laser power: Max. 0.9mW Numeric aperture: 0.6

CAUTION - Laser Device

To avoid electric shock when you use this system:

• Do not use the Wii during a lightning storm. There may be a risk of electric shock

from lightning.

• Use only the AC Adapter that comes with your system.

• Do not use the AC Adapter if it has damaged, split or broken cords or wires.

• Make sure that the AC Adapter cord is fully inserted into the wall outlet or

extension cord.

• Always carefully disconnect all plugs by pulling on the plug and not on the cord.

Make sure the Wii power button is turned OFF before removing the AC Adapter

cord from an outlet.

WARNING - Electric Shock

CAUTION - Motion Sickness

Playing video games can cause motion sickness in some players. If you or your child

feel dizzy or nauseous when playing video games, stop playing and rest. Do not drive

or engage in other demanding activity until you feel better.

Health and Safety Information

NOTE: This product does not contain latex.

This product complies with applicable laws barring the use of toxic materials such as

lead, mercury, cadmium, hexavalent chromium, PBB or PBDE in consumer products.

IMPORTANT SAFETY INFORMATION – READ THE FOLLOWING

WARNINGS BEFORE SETUP OR USE OF THE Wii. IF THIS

PRODUCT WILL BE USED BY YOUNG CHILDREN, THIS MANUAL

SHOULD BE READ AND EXPLAINED TO THEM BY AN ADULT.

FAILING TO DO SO MAY CAUSE INJURY.

PLEASE CAREFULLY REVIEW THE INSTRUCTION BOOKLET FOR

THE GAME YOU ARE PLAYING FOR ADDITIONAL HEALTH AND

SAFETY INFORMATION.

Wii Operations Manual

148Hx210W

4 5

Components

POWER Button

Press to turn the console ON or OFF.

NOTE: The Power LED does not go out when the

power is turned off.

USB Connectors

Connects to USB devices, such as the Wii

LAN Adapter (Sold separately).

Nintendo GameCube Memory Card Slots

For use with Nintendo GameCube Memory Cards.

Battery Cover

For access to CR Coin Lithium battery (CR2032). Perchlorate Material – special handling may apply.

More information can be found at http://www.dtsc.ca.gov/HazardousWaste/Perchlorate/index.cfm.

Do not remove battery cover unless instructed to do so by a Nintendo Customer Service representative.

Air Intake

Nintendo GameCube Controller Sockets

For use with Nintendo GameCube Controllers.

Air Vent

Do not block.

AV Multi Out Connector

Connects to the AV cable for your television.

Sensor Bar Connector

Connects to the Sensor Bar.

DC Input Connector

Connects to the Wii AC Adapter.

Power LED

Shows the status of the Wii console.

Green - Console power is ON.

Orange - Standby mode , WiiConnect24 is ON.

Red - Standby mode, WiiConnect24 is Off.

RESET

Press to restart a game.

SYNCHRO Button (SYNC.)

Used when synchronizing a Wii Remote or Wii

Remote Plus with the console. See pages 22-23.

SD Card slot

For inserting an SD memory cards.

See page 32.

EJECT Button

Press to eject a Wii or Nintendo

GameCube Disc.

Game Disc slot

For inserting a Wii or Nintendo GameCube Disc.

Slot lights blue and blinks when a disc is inserted.

When WiiConnect24 is set to ON, the slot will blink

when messages or data are received.

Slot A

Slot B

1234

Wii Console Wii Console

Wii Operations Manual

148Hx210W

To take advantage of the features of the Nunchuk accessory, you must use Wii

game software that supports Nunchuk gameplay features. Look for this icon on

game packaging for games that are designed to be used with Nunchuk.

6 7

Components

Power Button

Press to turn the Wii console ON or OFF.

Pointer Lens

B Button

Strap Lock

Wrist Strap

Attachment

Wrist Strap cord

Battery

Cover

Wii Remote

Wrist Strap

See page 23 for

information on wrist

strap use.

A Button

Minus (–) Button

HOME Button

Press to display the HOME Menu screen.

See page 64, Wii Operations Manual -

Channel and Settings, for more information.

Plus (+) Button

Speaker

1 Button

2 Button

Player LEDs

Indicate which player the

remote is set up for.

+Control Pad

Wii Remote Plus

(Shown with the included Wii Remote Jacket attached.)

External Extension

Connector

Allows connection of external

accessories such as the Nunchuk.

SYNCRO Button

(SYNC.)

Used when synchronizing

a Wii Remote Plus with

the console. See pages

24-25.

Control Stick

NOTE: If the Control Stick is moved out of neutral position when the Wii power is turned ON, or when

connecting to the remote, that position will be set as neutral position, causing incorrect game control during

game play. To reset the Control Stick, allow it to return to the normal neutral position, then simultaneously

hold down the A, B, Plus (+) and Minus (–) buttons on the remote for three seconds.

To avoid this from occurring, do not move the Control Stick when:

• Turning the Wii console on

• Plugging the Nunchuk into the Wii Remote Plus

• Starting Channels from the Channel Menu

• Returning to the Wii Menu from games or Channels

Nunchuk Plug

Connects to the External Extension

Connector on the Wii Remote Plus.

Connector Hook

Insert the cord of the wrist

strap through the hook.

C Button

Z Button

Lock/Release Levers

Squeeze levers to remove

plug from Wii Remote Plus.

Sensor Bar Plug

Plugs into the Sensor Bar Connector on the back of the Wii console.

See pages 13-17 for installation instructions.

Nunchuk Sensor Bar

Sensor Bar Stand

See page 16 for installation instructions.

Wii Operations Manual

148Hx210W

8 9

Components

AC Plug

Connects to a 120V AC wall

outlet.

DC Plug

Connects to the DC Input connector

on the back of the Wii console.

AV Multi Out Plug

Plugs into the AV Multi Out connector

on the back of the Wii console.

RCA Plugs

Plug into the AV input

connectors on a television.

Video

Audio (Left)

Audio (Right)

Wii AC Adapter

Wii AV Cable

Wii Console Stand

Wii Stand Plate

Wii Console Stand and Wii Stand Plate

NOTE: The Wii Console Stand and Wii Stand Plate come already assembled together,

as shown below.

NOTE: If these components become separated,

please see page 11 for assembly instructions.

Wii Operations Manual

148Hx210W

Wii Console Usage Precautions

Please read and follow the precautions listed below when

setting up and using the Wii console. Failure to do so

may result in damage to your Wii system or accessories.

• Do not use any AC Adapter other than the one provided with your system.

• The console has intake and exhaust vents designed to maintain adequate

ventilation. Do not operate the console in any location where these vents may

become covered or obstructed, for example, on carpet or in a tightly enclosed

space. Keep vents clear of any dust or other foreign material.

• Do not disassemble or try to repair the Wii console, accessories or components.

Doing so voids your warranty.

• After you have ﬁnished playing, be sure to remove the Game Disc from the

console.

• Do not store the Wii console in a humid place, on the ﬂoor, or in any location

where it may collect dirt, dust, lint, etc.

• Do not drop, hit or otherwise abuse the Wii console, components or accessories.

• When disconnecting any plugs from the console or wall outlet, ﬁrst turn the

Wii console off. Then carefully pull by the plug itself rather than by the cord.

• Do not step on, sharply pull or bend any wire or cables.

• Do not expose the Wii console, components or accessories to extreme heat or cold.

• Do not spill any liquids on the Wii console, components or accessories.

To clean, use a soft slightly damp cloth. Use water only. Allow to dry completely

before using.

Vertical Horizontal

10 11

System Setup

Wii Console Placement

NOTE: Choose a location to set up the console that has enough room to allow

for free ﬂow of ventilation around the console.

The Wii console can be placed in a vertical or horizontal position. If located in a vertical

position, it should be placed in the Wii console stand.

The console can be damaged if knocked over, especially if this occurs during

operation of the disk drive. The Wii stand plate has been included to increase

stability of the Wii console, and should be used if the console is placed in a

vertical position.

CAUTION - Console Damage

1. Attach the Wii stand plate to the bottom of the

console stand by inserting the prongs into the

slots as shown above.

2. Firmly slide the stand plate into slots in the

direction shown.

3. Place the console stand on a ﬂat surface and place

the console into the stand. Lower the console

straight down into the console stand rather

than sliding it in from the front.

Horizontal Placement

Place the Wii console on a ﬂat horizontal surface. Retain the Wii console stand and

stand plate for future use in case you want to switch the orientation of the console.

System Setup

Vertical Placement (NOTE: These components come already assembled. If they become separated, see instructions below to reattach.)

Wii Operations Manual

148Hx210W

12 13

System Setup

Wii Console TV Inputs

Connecting the AV Cable

IMPORANT: The Wii console will not work with any AV cable other than

the model supplied with your Wii system or the component video cable

listed below.

NOTE: For higher quality video, the Wii component video cable

(Model No. RVL–011) can be ordered through Nintendo’s web site at

support.nintendo.com (USA/Canada only) or by calling Customer Service

at 1-800-255-3700. Before ordering, check to make sure your TV has

component video inputs.

1. Insert the AV Multi Out plug on the Wii AV

Cable into the AV Multi Out connector on the

back of the console.

2. Insert the RCA plugs on the Wii AV

Cable into the input connectors on

the TV, VCR or other audio equipment.

VIDEO AUDIO L AUDIO R

Sensor Bar mounted

above the screen.

Sensor Bar mounted

below the screen.

Sensor Bar Setup

Connecting the Sensor Bar

Insert the Sensor Bar plug into the Sensor Bar

connector on the back of the console.

Placing the Sensor Bar

The Sensor Bar can be placed either above or below the TV screen.

• See page 14 for instructions on mounting the Sensor Bar to the top of the TV.

• See page 15 for instructions on mounting the Sensor Bar below the TV screen.

CAUTION - TV Screen Damage

Some televisions can be damaged by the display of a stationary image, because the image

may be permanently "burned" into the screen. Playing video games with stationary images

or patterns, or leaving video games on hold or pause, may lead to this type of damage. When

taking a break, place the game on pause and turn the TV off until you are ready to play again.

Before using your Wii system with any TV, especially front and rear projection or

plasma models, be sure to review all documentation included with your TV to ﬁnd

out whether video games can be played on the TV without damaging it.

If in doubt, contact the manufacturer of the TV. Neither Nintendo nor any of Nintendo's

licensees will be liable for any damage to your TV.

Wii Operations Manual

148Hx210W

System Setup

14 15

System Setup

Mounting the Sensor Bar Above the Screen

1. Remove the protective ﬁlm from the foam pads

on the bottom of the Sensor Bar.

• The front of the Sensor Bar should be

aligned close to the front of the TV.

• The center of the Sensor Bar should be

aligned with the center of the TV.

2. For additional stability, you can add adhesive

backed foam tape from the supplied sheet.

3. Mount the Sensor Bar to the top of the TV.

Mounting the Sensor Bar Below the Screen

1. Remove the protective ﬁlm from the foam pads

on the bottom of the Sensor Bar.

2. For additional stability, you can add adhesive

backed foam tape from the supplied sheet.

3. Mount the Sensor Bar to the front edge of the

surface the TV is sitting on. Do not place the

Sensor Bar below the surface that the TV is

sitting on; for example, on shelves below

the TV.

• The center of the Sensor Bar should be

aligned with the center of the TV.

• The front of the Sensor Bar should be

aligned with the front of the surface

the TV is sitting on.

Wii Operations Manual

148Hx210W

120 V AC outlet

DC Input Connector

Wii AC Adapter

1. Insert the DC plug on the Wii AC Adapter cord into the DC input connector on the

back of the console.

2. Insert the AC plug into a 120V AC wall outlet. Make sure the power is off (the

Power LED is red) when unplugging the AC Adapter.

CAUTION: To prevent electric shock, match the wide blade of the plug to the

wide slot and insert fully into outlet.

Sensor Bar cable position

If desired, the Sensor Bar cable can be fed through a channel on the bottom of the

Sensor Bar to orient the cable to the left or right.

NO NO

YES

Using the Sensor Bar Stand

Communication between the Wii Remote Plus and the Sensor Bar may be improved in some situations by mounting the Sensor Bar on the Sensor Bar stand; for example, if the TV

is sitting on the ﬂoor.

Be sure to:

• Align the center of the Sensor Bar with the center of the TV.

• Align the front of the Sensor Bar with the front edge of the TV, or with the front edge of the surface that the TV is sitting on.

System Setup

16 17

1. Remove the protective ﬁlm from the foam pads

on the bottom of the Sensor Bar stand.

2. For additional stability, you can add adhesive backed foam tape from the supplied sheet. These can be applied

to both the top and bottom of the stand.

3. If you are using the extra foam tape,

remove the protective ﬁlm from the

piece on the top of the Sensor Bar stand.

The Sensor Bar Stand can also be used on top of the TV if part of the TV blocks, or

prevents proper installation of, the Sensor Bar.

Make sure the Sensor Bar is horizontal

and it is not blocked by the TV.

4. Attach the Sensor Bar stand to the Sensor Bar, aligning the pegs

on the stand with the holes in the bottom of the Sensor Bar.

5. Mount the Sensor Bar stand to:

• the front edge of the surface the TV is sitting on, or

• to the top of the TV.

Do not place the Sensor Bar stand below the

surface that the TV is sitting on; for example, on

shelves below the TV.

Wii Operations Manual

148Hx210W

Wii Remote Jacket

18 19

System Setup

WARNING - Battery Leakage

TV and Audio/Video Settings

After you have completed all steps of the setup procedure and are ready to

use the Wii system, you will need to set the appropriate "input select"

setting for your TV, VCR or other audio equipment.

1. Turn ON the power for your TV and any audio equipment connected to your

gameplay setup and the power on the Wii console.

2. Select the correct input setting for your TV (see Input Select Information at right).

3. The Wii Menu (see below) should appear on the TV screen. See the Wii Menu

section of the Operations Manual - Channels and Settings, for more information

on this feature.

If the Wii Menu screen does not appear, check to make sure your input setting is

correct and review the Troubleshooting section on pages 33-34.

Input Select Information

The input select allows you to switch between the different inputs on your TV or VCR.

Manufacturers of TVs and VCRs use different names and locations for "input select.”

The common names for the input select are: input, select, input select, line, line in,

source, in, EXT, and AUX. Consult your TV or VCR instruction manual for details.

NOTE: More information on "Input Select" is available on our web site at

support.nintendo.com/consumer/inputselects.html

Locate the input select for the component that the Wii AV Cable is connected to (either

the TV or VCR). The most common locations for input select are:

• A button on the front of the TV or VCR.

• A button on the remote control.

• A high-numbered or low numbered channel (92, 99, 00, or 02) on the TV or VCR.

• An on-screen menu selection.

Setup of the Wii Remote Plus

The Wii Remote Plus comes with the Wii Remote jacket installed.

• Be sure that the Wii Remote jacket is installed during gameplay to reduce

the risk of harm to the remote, surrounding objects, or people.

• It may be necessary to remove the Wii Remote jacket – for example, to

replace the batteries in the Wii Remote Plus. If you do remove the Wii

Remote jacket, be sure to replace it before further play.

Installing Batteries

The Wii Remote Plus uses AA batteries. Nintendo recommends high quality alkaline

batteries for best performance and longevity of battery life. If you use rechargeable

nickel metal hydride (NiMH) batteries, be sure to follow the manufacturer’s

guidelines for safety and proper usage.

Leakage of battery ﬂuid can cause personal injury as well as damage to your remote.

If battery leakage occurs, thoroughly wash the affected skin and clothes. Keep battery

ﬂuid away from your eyes and mouth. Leaking batteries may make popping sounds.

To avoid battery leakage:

• Do not mix used and new batteries (replace all batteries at the same time).

• Do not mix different brands of batteries.

• Nintendo recommends alkaline batteries. Do not use Lithium ion, nickel cadmium

(nicad), or carbon zinc batteries.

• Do not leave batteries in the remote for long periods of non-use.

• Do not recharge alkaline or non-rechargeable batteries.

• Do not put the batteries in backwards. Make sure that the positive (+) and

negative (-) ends are facing in the correct directions. Insert the negative end ﬁrst.

When removing batteries, remove the positive end ﬁrst.

• Do not use damaged, deformed or leaking batteries.

• Do not dispose of batteries in a ﬁre.

See page 20 for instructions on removing the Wii Remote jacket and

installing batteries.

Wii Operations Manual

148Hx210W

20 21

System Setup

Wearing the Wii Remote Wrist Strap

1. Open the lever on the strap lock and place your hand through the wrist strap.

Hold the remote ﬁrmly in your hand.

2. Slide the strap lock up so that the strap will not fall off your wrist. Do not over

tighten the strap lock so that it’s uncomfortable. It should just be tight enough to

hold the wrist strap in place. Close the lever to hold the strap lock in place.

Wii gameplay with the Wii Remote Plus can involve rapid or vigorous motion.

Please use the wrist strap to prevent losing your grip on the remote and causing

damage to the remote or surrounding objects, or injury to other people.

WEAR THE WRIST STRAP WHEN USING THE Wii REMOTE PLUS.

• Make sure all players use the wrist strap and that the strap lock is correctly tightened.

• When sharing the Wii Remote Plus between multiple players, make sure each

person uses the wrist strap properly.

• Wearing the wrist strap will prevent you from accidentally dropping or throwing the

remote during gameplay, which could damage the remote or surrounding objects,

or cause injury to other people.

DO NOT LET GO OF THE REMOTE DURING GAME PLAY.

• Read the Instruction booklet for the game you are playing and follow all game

control instructions for correct use of the Wii Remote Plus or accessory controllers.

• Hold the remote securely and avoid excessive motion, as it may cause you to let go

of the remote and may break the wrist strap.

• If your hands become moist, stop and dry your hands.

ALLOW ADEQUATE ROOM AROUND YOU DURING GAME PLAY.

• Stay at least three (3) feet away from the television.

• As you may move around during gameplay, make sure objects and other people are

out of your range of movement or arm motion to prevent damage or injury.

CAUTION - Use the Wrist Strap

Installing Batteries (cont.)

1. Pull the Wii Remote jacket

off the base of the Wii

Remote Plus and pull the

wrist strap out of the hole

in the bottom of the jacket.

2. Pull the jacket up the remote far

enough to expose the entire

battery door and remove the door.

3. Insert the batteries into the battery

chamber. Be sure to insert the

minus (–) end ﬁrst when inserting

new batteries, and remove the

plus (+) end ﬁrst when replacing

the batteries.

4. Replace the battery cover, thread

the wrist strap through the hole in

the bottom of the jacket and pull

the jacket back over the bottom of

the remote.

5. If you remove the jacket from the

remote, replace it by inserting the

top of the remote into the large

hole on the front of the jacket.

Be sure to push it all the way into

the inside of the jacket.

6. Thread the wrist strap throught

hole in the bottom of the jacket,

as shown in step 4, above.

7. Insert the connector cover into the

External Extension Connector on

the bottom of the remote.

NOTE: Battery life can be checked by pressing the Home Button. See pages 64-65,

Wii Operations Manual - Channels and Settings, for more information.

Wii Operations Manual

148Hx210W

1P 2P 3P 4P

MORE LESSBattery Life

22 23

System Setup

Synchronizing Your Wii Remote Plus with

the Wii Console

This procedure allows the Wii Remote or Wii Remote Plus to communicate with

the console.

The Wii Remote Plus included with your Wii system has been synchronized

with the console at the factory.

There are two different modes of synchronizing (syncing) a Wii Remote or Wii Remote

Plus with your console:

STANDARD MODE – The Standard Mode procedure is used when adding additional

remotes to your system or if you want to re-synchronize your original remote.

Once synchronized, the remote will stay synced to the console unless you overwrite

this setting by syncing the remote to a different console.

ONE TIME MODE – This mode allows you to temporarily use your remote on a console

other than your own or to use a friends remote on your console. It does not delete

the Standard Mode setting stored in the remote. In this mode, the remote will

only communicate with the console while the power is on. When the power is turned

off the remote will lose its sync with the console.

• Only a Wii Remote or Wii Remote Plus in Standard Mode can turn the console

power ON or OFF.

Standard Mode Synchronization

NOTE: Make sure you have placed batteries in the Wii Remote Plus.

1. Press the Power button on the Wii console to turn it on.

2. Remove the battery cover on the back of the remote. Press and release the SYNC.

button inside the cover. The Player LEDs will blink.

3. Open the SD Card Slot cover on the front of the Wii console. Press and release the

SYNC. button on the inside of the compartment

4. When the Player LED blinking stops, connection is complete. The LED that is

illuminated indicates the player number.

This procedure must be followed for each additional remote added to

your system.

NOTE: With Standard Mode Synchronization, you can synchronize up to 10

Wii Remote or Wii Remote Plus controllers with your Wii console. The data

of the remote that was sychronized ﬁrst is deleted if you synchronize more

than 10.

One Time Mode Synchronization

NOTE: This mode temporarily removes the Standard Mode synchronization setup for

all remotes until the power of the Wii console is turned off. When the power is turned

back on again, the Standard Mode settings will return.

1. Press the HOME Button on a remote that is synchronized with the console.

2. Select the Wii Remote Settings option

from the Home Button menu, then

select the Reconnect option.

3. Press the 1 and 2 Buttons

simultaneously on the remote

that you want to synchronize with

the console.

The order in which you synchronize

remotes will set the player order for

multiplayer games.

4. The Player LEDs will blink during the syncing process. When the blinking stops,

the connection is complete. See diagram at right for a description of what the

blinking indicates.

NOTE: One Time Mode synchronization is temporary. The Wii Remote or Wii

Remote Plus will lose this synchronization under the following conditions:

• When you turn off the console by pressing the Power Button on either the remote

or the console.

• When starting up a game or Channel from the Wii Menu.

• When returning to the Wii Menu after exiting from a game or Channel.

• When you select Reset on the HOME Menu screen.

• When you press the Reset Button on the front of the console.

IMPORTANT: IF YOUR REMOTE LOSES IT’S SYNCHRONIZATION WITH THE CONSOLE

AND YOU ARE UNABLE TO RE-SYNC IT, REVIEW THE Wii REMOTE PLUS TROUBLE-

SHOOTING PROCEDURES ON PAGE 34

After the syncing

process, LED that is lit

shows the player

number for that remote.

During the syncing

process, the number of

LEDs that blink will show

the battery life of the

remote that is being

synchronized.

Wii Operations Manual

148Hx210W

For best operation, play

directly in front of the TV.

Recommended distance: 3’– 10’

(from Sensor Bar to Wii Remote Plus)

24 25

Using Game Discs

Wii System Play Guidelines

Playing a Wii or Nintendo GameCube

Game Disc

Before Inserting a Disc

• Turn ON the power for your TV and any audio equipment connected to your

gameplay setup.

• Select the correct input setting for your TV. (See page 18, TV and Audio/Video

Settings.)

Insert a Game Disc

Insert your Game Disc into the Game Disc slot on the front of the console. The Wii

console will turn ON automatically.

• If your console is placed vertically, the disc label will face to the right.

• If your console is placed horizontally, the disc label will face upwards.

Starting the Game

1. Using the Wii Remote Plus, move the cursor over the Disc Channel option on the

Wii Menu screen and press the A Button to make a selection.

NOTE: Please read the Disc Channel section in the Operations

manual included with your Wii system for complete informa-

tion on using Game Discs in the Wii console.

2. Select “PLAY” on the game title screen to begin the game. Review the

instruction booklet for the game you are playing for speciﬁc game

information.

Game Disc Usage Precautions

Please read and follow the precautions listed below when using Wii or

GameCube Game Discs in the Wii Console. Failure to do so may result in

damage to your Wii system or game discs.

• To avoid pinching your ﬁnger, do not load the disc with your ﬁnger in the

hole. Always handle the disc by the edges.

• Do not touch the bottom unprinted surface of the Game Disc. Always handle

the disc by the edges.

• Do not use cracked, deformed or repaired discs.

• Do not bend or put excessive pressure on discs when loading into console.

• Do not leave discs in direct sunlight or expose them to high temperatures,

high humidity or dust, dirt or other contaminates.

• When not using discs, store them in their cases to prevent them from getting

scratched, dirty or damaged.

• Do not write on, or place stickers on any part of the disc.

• If a disc becomes dirty or contaminated with ﬁngerprints, the system may not

be able to read the game data correctly. If necessary, clean the disc with a

soft, slightly damp cotton cloth (use water only). Clean the disc from center

towards the edges; do not use a circular motion.

Wii System Play Guidelines

CAUTION - Adequate Space Required

Be sure you have enough space around you during game play.

To avoid injury or damage, make sure other people or objects are

not within your range of motion.

For best results when using the Wii system, follow these recommendations.

For best use of the Wii Remote Plus, follow these guidelines:

• Avoid blocking the signal between the remote, the Sensor Bar and the Wii console

with objects.

•

Use the remote the correct distance from the Sensor Bar. The optimal distance is

between 3 and 10 feet.

• Avoid bright light sources, including sunlight, behind or near the TV, shining towards

the remote or reﬂecting off of the screen.

• Avoid highly reﬂective surfaces near the Sensor Bar.

• Avoid sources of infrared light in the gameplay area such as electric, propane or

kerosene heaters, ﬂames from ﬁreplaces or candles, and stoves or other sources of heat.

• If the remote seems to operate eratically, check and adjust the Sensor Bar sensitivity if

necessary. (See page 52 in the Wii Operations Manual - Channels and Settings.)

Be sure to read the following pages on using the Wii Remote Plus, Nunchuk,

and Nintendo GameCube controllers before using the Wii system.

NOTE: A GameCube controller is required for playing GameCube games.

Wii Disc

Nintendo GameCube Disc

Label faces

towards the

right side of the

Wii console

Label faces

towards the

right side of the

Wii console

Wii Operations Manual

148Hx210W

Wii Remote Plus –

Vertical Position

Wii Remote Plus and Nunchuk

Wii Remote Plus

and Classic Controller Pro™ (sold separately)

Wii Remote Plus – Horizontal Position

26 27

Using the Wii Remote Plus

Wii Remote Plus Conﬁgurations

Depending on the game, the way you hold and operate the remote will vary. You may need to hold the remote in either one or two hands. Read the instruction booklet for the

game you are playing for information about what kind of gameplay control is required for that game.

The remote can be used by itself, or in different conﬁgurations when connected up to other Wii accessories. These conﬁgurations can be used right or left handed.

Basic Operations

Point

Point the remote at a speciﬁc place on

the TV screen.

Waving

Wave the remote back and forth from

side to side

Pushing or Pulling

Move the remote forward and backward.

Twisting

Move the remote in a twisting motion by

rotating your arm.

Holding or Grabbing

Point the remote at a speciﬁc place on

the TV screen and move the remote

while holding down a button.

Wii Operations Manual

148Hx210W

Lock/Release Levers

Squeeze levers to remove

plug from Wii Remote Plus.

28 29

Using the Nunchuk

Setup and Use of the Nunchuk

Wii gameplay with the Wii Remote Plus and Nunchuk can involve rapid or vigorous motion. Please use the wrist strap to prevent losing your grip on the remote

and causing damage to the remote and surrounding objects, or injury to other people.

Be sure to install the Nunchuk as described. Use the connector hook on the Nunchuk plug with the wrist strap cord to prevent the Nunchuk plug from becoming

separated from the External Extension connector on the remote and striking objects or people.

2. Insert the Nunchuk plug into the

External Extension Connector on

the bottom of the remote until it

“clicks” into place. IMPORTANT: Make sure the

wrist strap cord runs through

the connector hook.

Connecting the Nunchuk

1. Feed the cord on the wrist strap

through the connector hook.

Disconnecting the Nunchuk

Press the Lock/Release Levers on the sides of the Nunchuk plug and pull the plug

straight out of the External Extension Connector on the bottom of the remote.

3. Open the lever on the strap lock and place your hand through the wrist strap. Hold

the remote ﬁrmly in your hand. Slide the strap lock up so that the strap will not fall

off your wrist. Do not over tighten the strap lock so that it’s uncomfortable. It

should just be tight enough to hold the wrist strap in place. Close the lever to

hold the strap lock in place.

Holding the Nunchuk and Wii Remote Plus

Connector Hook

CAUTION - Use the Wrist Strap

Wii Operations Manual

148Hx210W

Nintendo GameCube

Controller

30 31

Using Nintendo GameCube Controllers

Setup of Nintendo GameCube Controllers

NOTE: When using GameCube controllers with the Wii console, be sure and

use the stand plate to help prevent the console from being tipped over by

pulling on the controller cable. (See page 11, Vertical Placement.)

Optionally, the console can be placed horizontally. When using GameCube

Controllers in the horizontal position, the controller socket cover can be

removed to allow the console to lay ﬂat. See page 31 for instructions on

removing the cover.

Connecting GameCube Controllers

NOTE: GameCube controllers only work when playing GameCube games on the

Wii console.

• Plug the controllers into the GameCube controller sockets on the side of

the console.

• Review the instruction booklet for the game you are playing for the number and

position of controllers required for that speciﬁc game.

• The Classic Controller™ does not work with GameCube games.

Removing the Controller Socket Cover

If you are using the Wii console in a horizontal position, you must remove

the controller socket cover when using GameCube Controllers to allow the

console to lay completely ﬂat.

1. Stand the Wii console upright as shown and squeeze gently until you feel a

slight click.

2. Remove the cover by pulling straight up out of the console.

3. The cover can be replaced by reinserting the cover straight down into the console

until it clicks into place.

NOTE: The GameCube Memory Slot Cover can be removed with the same

procedure, and should be removed if you are using GameCube Memory

Cards when the Wii console is placed horizontally.

Horizontal

Position

Press in

and up

Use the Wii stand plate when

using GameCube controllers

to prevent the console from

tipping over.

Wii Operations Manual

148Hx210W

miniSD card

and Adapter

microSD card

and Adapter

SD card

Note:

Label faces

towards the Wii

game disc slot

No picture on TV screen

• Make sure you have completed all steps, in the order that they appear, on the Quick

Setup sheet included with your system.

• Make sure that all components of your setup are plugged into power outlets and that

all components are turned ON.

• Make sure that cable connections are correctly installed and that all plugs are securely

plugged into the appropriate connectors.

• Make sure that the INPUT settings are correct for your particular setup. (Review page 18

on Input Select information.)

No sound is heard or sound quality is poor

• Make sure the TV volume is not turned off or muted.

•

Make sure that all audio connections are correctly installed and that all plugs are

securely plugged into the appropriate connectors.

• Make sure the Wii AV Cable is plugged into the "input" connectors on the

TV or VCR, not the "output" connectors.

• Make sure that the INPUT settings are correct for your particular setup. (Review

page 18 on Input Select information.)

• The sound in some games doesn't begin until the game begins.

• If you have a mono TV or VCR and have left one of the audio cables unconnected

you may not get all game sounds. Use a "Y" Adapter to get both left and right

sound channels.

• If your TV/VCR have both mono and stereo

options, make sure they match your setup.

• Check the instruction booklet for the game you are playing to see if there are

volume controls or mono/stereo options that can be set from within the game.

The console Power LED does not come on, or goes off

during game play

•

Make sure the AC Adapter is plugged into both the wall outlet and the back of

the console.

•

If the light is still off, disconnect the AC Adapter plug from the wall outlet, wait 2

minutes and plug it back into the outlet. Turn the console power ON.

System unable to read disc or

game disc will not

operate in console

NOTE: Game Discs will not start automatically. You must start disc games from the Disc

Channel on the Channel Menu screen.

• Make sure the disc is inserted correctly. The label side of the disc must face to the

right if the Wii console is set up vertically, or must face up if the Wii console is set

up horizontally.

• Check to be sure that the Game Disc is clean and in good condition. If dirty, wipe with

a soft cloth, from the center to the outside. Do not wipe with a circual motion.

You can

also try using the Wii Lens Cleaning Kit (sold separately) to clean the internal lens.

• Eject the Game Disc, and turn the power OFF and then ON. Reinsert the disc and try

playing the game again.

• Check that the Game Disc will work on your version of the Wii. This system will only

work with Game Discs made for use in the USA, Canada, Mexico and Latin America.

Game Disc slot does not light blue or lights brieﬂy.

This is the normal operation of the Game Disc slot. The slot only lights temporarily

when the system is turned on by a) inserting a Game Disc, b) using the Power

Button on the Wii Remote Plus or c) using the Power Button on the Wii console.

The Game Disc slot will also light temporarily if you receive a message via

WiiConnect24 (this feature must be turned on to receive messages, see page 62 in

the Wii Operations Manual - Channels and Settings for more information).

Troubleshooting (Before seeking assistance, review the following problems and solutions.)

Troubleshooting

32 33

Using Memory Cards

Using SD Memory Cards

SD cards are used in many digital cameras and cell

phones and for data storage on PCs. The Wii console

accepts only SD or SDHC cards (32 GB maximum),

including miniSD or SDHC and microSD or SDHC

cards when used with their respective adapters.

An SD memory card can be used to store the following data from the

Wii system memory:

• Game save information from Wii games (depending on the game,

some information cannot be copied to SD cards)

• Certain data from the Wii Channel applications

• Games downloaded through the Wii Shop Channel such as Virtual

Console™ and WiiWare™ games

• Add-on content downloaded within a game

NOTE: Games and add-on content copied to an SD card cannot

be used with a different Wii console.

To use an SD card, open the SD card slot cover on the

front of the console and insert the SD card until it clicks

into place.

See the SD Card Menu and Photo

Channel sections in the Wii Operations

Manual - Channels and Settings for

more information on using SD cards

with the Wii system.

Using Nintendo GameCube Memory Cards

NOTE: Nintendo GameCube Memory cards can only be used to save game

information for Nintendo GameCube Game Discs.

To use a Nintendo GameCube Memory card, open the slot cover and insert the

memory card as shown below.

Note: Label faces

towards the top or

right side of the

Wii console.

If purchasing a new SD card, a list of cards that have been tested to work with the Wii console can

be found in the Wii - Systems and Accessories section of http://support.nintendo.com

CAUTION: Do not insert or remove memory cards when reading or writing

information to or from the card or initializing the card. Doing so may damage the

Wii console or memory card, or permanently destroy data. Can’t get past the Language Select screen

• Synchronize your Wii Remote Plus controllers using the procedure on page 22.

• Review the Sensor Bar setup instructions on pages 13-16 to ensure proper placement

and installation.

Wii Operations Manual

148Hx210W

Wii Remote Plus lights blink, but don’t stay lit

(remote does not sync)

• Review the Sensor Bar setup instructions in this manual to ensure proper placement.

• Make sure batteries are not depleted.

• Try resetting the Wii Remote Plus - remove the batteries, wait one minute,

then replace the batteries. Wait a few seconds, and then try synchronizing

the remote again.

• If you are unable to re-sync the remote, try the following procedure:

1. Turn off the power of the Wii console with the POWER Button on the front of

the console.

2. Unplug the power cord from the wall outlet for a few seconds, then plug it back

in again.

3. Turn on the power of the Wii console.

4. When you see the Health and Safety screen, press and hold the SYNCHRO

Button on the console down for 15 seconds. This will clear any sync

information left on the console.

5. Synchronize your Wii Remote Plus controllers using the procedure on page 22.

Wii Remote Plus or controller accessory buttons stick

Clean sticking buttons using the following procedure:

1. For the Wii Remote Plus, remove batteries and disconnect any accessories

before cleaning.

2. Use an unused toothbrush and hot tap water. Do not use boiling water, soap

or detergent.

3. Dip the toothbrush in hot water and shake off excess amount. Lightly scrub

sticking buttons, working the bristles around sides of buttons and into cracks.

4. Dry controller with soft cloth or towel and let air dry for at least 2 hours.

5. Test buttons and repeat procedure if necessary. Do not submerge in, or pour

any type of liquid onto a controller or accessory.

Wii Remote Plus doesn't properly respond to player

motion (erratic hand cursor, can’t swing bat, can’t bowl, etc.)

• If the lights on your remote blink, but do not stay lit, see the ﬁrst troubleshooting

step on this page, at left.

• Review the Sensor Bar setup instructions in this manual to ensure proper

placement.

• Make sure no objects are blocking the signals between the Sensor Bar, the Wii

console, and the Wii Remote Plus.

• Make sure batteries are not depleted.

• Use the Sensor Bar Stand if the Sensor Bar is located below under the TV.

• Check and adjust the Sensor Bar sensitivity if necessary. (See page 52 in the Wii

Operations Manual - Channels and Settings.)

The following conditions can interfere with the operation of the remote:

1. Using the remote too close or too far from the Sensor Bar. The optimal distance

is between 3 and 10 feet.

2. Bright light sources, including sunlight, behind or near the TV, shining towards

the remote or reﬂecting off the TV screen.

3. Highly reﬂective surfaces near the sensor bar.

4. Sources of infrared light in the gameplay area such as electric, propane or

kerosene heaters, ﬂames from ﬁreplaces or candles, and stoves or other sources

of heat.

5. Radio frequency interference may cause the Wii Remote Plus to work erratically.

Check for and move or turn off wireless devices such as cordless phones,

wireless computer keyboards or mice or other similar devices.

If you think any of these conditions are affecting the operation of the remote, try

removing or reducing the source of interference.

Troubleshooting

FCC Information

34 35

Troubleshooting

FCC Information

Regulations for Equipment Use in U.S.A. and Canada

FCC and Industry Canada Information

In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled

exposure, this device and its antenna must not be co-located or operating in conjunction with any

other antenna or transmitter. This device complies with Part 15 of the FCC Rules and RSS-210 of

Industry Canada. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modiﬁcations not expressly

approved by the manufacturer could void the user's authority to operate this device.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician or call Nintendo

Consumer Service at 1-800-255-3700 for assistance.

The user may ﬁnd the following booklet prepared by the Federal Communications Commission

helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available

from the U.S. Government Printing Ofﬁce, Washington, D.C., 20402, Stock No. 004-000-00345-4.

The term IC before the certiﬁcation/registration number only signiﬁes that the Industry Canada

technical speciﬁcations were met.

If your Wii system still does not operate correctly after trying

the troubleshooting steps, DO NOT return the console to the

store. You will lose saved game data and all Wii Shop

Channel downloads and Wii Points.

Visit support.nintendo.com for assistance and additional

troubleshooting and repair options or call 1-800-255-3700.

When playing a game that includes Wii MotionPlus

features, the Wii Remote Plus operates erratically

or unexpectedly.

• The Wii Remote Plus may need to be recalibrated due to the following:

1. Changing batteries in the Wii Remote Plus during gameplay.

2. Moving Wii MotionPlus from a cold environment into a warm environment.

To recalibrate the Wii Remote Plus, place it on a ﬂat horizontal surface with the buttons

facing down. It should be 20” or more from your television and Wii console for

correct calibration. Wait for a few seconds and check the operation. Also, review the

instruction manual for the game you are playing for more information.

NOTE: This procedure must be done during gameplay.

Wii Operations Manual

148Hx210W

Nintendo Co RVL036 Wii Remote Plus User Manual

Nintendo Co Ltd Wii Remote Plus Users Manual

Users Manual

Navigation menu

Namespaces

Views

Navigation