Nokia Solutions and Networks PCS002 User Manual ITMN BTSE BS11

Download:
Mirror Download [FCC.gov]
Document ID	18990
Application ID	MoQ1AxlUKejiX4HkdqYc5g==
Document Description	BS11 Installation test
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.66kB (233262 bits)
Date Submitted	1999-01-08 00:00:00
Date Available	1999-03-16 00:00:00
Creation Date	1998-03-04 13:05:40
Producing Software	Acrobat Distiller 3.01 for Windows
Document Lastmod	1999-01-05 19:14:52
Document Title	ITMN:BTSE BS11
Document Creator	Windows PSCRIPT

Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
DRAFT
A30808-X3247-B349-1-7630
CAUTION
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own
expense.
ITMN: BTSE BS11
Installation Test
Base Transceiver Station Equipment
Important Notice on Product Safety
Elevated voltages are inevitably present at specific points in this electrical equipment. Some of the
parts can also have elevated operating temperatures.
Non-observance of these conditions and the safety instructions can result in personal injury or in property damage.
Therefore only trained and qualified personnel may install and maintain the system.
The system complies with the standard EN 60950. All equipment connected has to comply with the
applicable safety standards.
Copyright (C) Siemens AG 1998
Issued by the Public Communication Network Group
Hofmannstraße 51
D-81359 München
Technical modifications possible.
Technical specifications and features are binding only insofar as
they are specifically and expressly agreed upon in a written contract.
AD – 2
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
Issues
Change indications (Ind.):
N = new;
G = modified;
Document
Titel
Register
0 = deleted;
Page(s)
Issue/Ind.
ADMIN
ITMN: BTSE BS11 . . . . . AD . . . . . . . . . . . . . . . . . . . . . . . . . 1... 8
ITMN: BTSE BS11 . . . . . BS21 . . . . . . . . . . . . . . . . . . . . . . . 1... 56
This document consists of a total of Pages
A30808-X3247-B349-1-7630
AD – 3
ITMN: BTSE BS11
AD – 4
Installation Test
Base Transceiver Station Equipment
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
Contents
1.1
1.2
1.3
1.4
1.5
BS11 Installation Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS11-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS11-1
Visual Inspection of BTSE mechanics . . . . . . . . . . . . . . . . . . . . . . . . BS11-4
Visual Inspection of BTSE Electric Installation . . . . . . . . . . . . . . . . . . BS11-5
Abis Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS11-8
Preparation for Offline Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS11-12
Software Download and Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Execution of Offline Tests . . . . . . . . . . . . . . .
RF and Function Tests . . . . . . . . . . . . . . . . .
Start of Abis Simulation. . . . . . . . . . . . . . . . .
Database download . . . . . . . . . . . . . . . . . . .
Call check with MA-10-Loop . . . . . . . . . . . . .
Bit Error Rate (BERT) Test with MS-Loop . .
Settings at HP 8594A . . . . . . . . . . . . . . . . . .
RFI-Confirmation: Unit ATMN . . . . . . . . . . . .
.....
.....
.....
.....
.....
.....
.....
.....
BS21-19
BS21-19
BS21-21
BS21-25
BS21-27
BS21-29
BS21-31
BS21-33
4.1
4.2
4.3
4.4
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frequency/Channel Conversion Table . . . . . . . . . . . . . . . . . . . . . . .
Binary-HEX-Decimal Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power/Level Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Used Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BS21-35
BS21-35
BS21-45
BS21-45
BS21-46
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABB - 47
A30808-X3247-B349-1-7630
.......
.......
.......
.......
.......
.......
.......
.......
......
......
......
......
......
......
......
......
AD – 5
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
Illustrations
AD – 6
Fig. 1.1.1
Installation Test Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS11-3
Fig. 1.3.1
Antenna Cabling (example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS11-6
Fig. 1.1
Connection panel (for external antenna). . . . . . . . . . . . . . . . . . . . . BS11-9
Fig. 1.2
Protection circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS11-10
Fig. 1.4.3
SW3 /The black square stands for toggle) and TB01 ÷ TB04. . . . BS11-11
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
Tables
Tab. 1.3.1
Technical Data: BS-11i and BS-11e . . . . . . . . . . . . . . . . . . . . . . . BS11-7
Tab. 1.2
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS11-8
Tab. 1.1
SW3 dip-switch configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS11-8
Tab. 1.2
TB01 ÷ TB04 configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS11-9
Tab. 4.1
Frequency/Channel Conversion Table . . . . . . . . . . . . . . . . . . . . BS21-35
Tab. 4.2
GSM Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS21-35
Tab. 4.3
E-GSM Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS21-37
Tab. 4.1.4
DCS Part 1/3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS21-38
Tab. 4.1.5
DCS Part 2/3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS21-39
Tab. 4.1.6
DCS Part 3/3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS21-40
Tab. 4.1.7
PCS Part 1/3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS21-42
Tab. 4.8
PCS Part 2/3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS21-42
Tab. 4.9
PCS Part3/3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS21-44
Tab. 4.1
Binary-HEX-Decimal Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS21-45
Tab. 4.1
Power conversion table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BS21-45
A30808-X3247-B349-1-7630
AD – 7
ITMN: BTSE BS11
AD – 8
Installation Test
Base Transceiver Station Equipment
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
1 BS11 Installation Test
1.1
1.1.1
Introduction
Aims of Installation and Commissioning
The installation and commissioning of a network element followed by unit acceptance is
proof of:
Correct, complete delivery according to network planning and the customer
order.
Correct mechanical and electrical installation according to the installation
documents.
The functional ability of the the supplied HW
(correct functioning of the NEs at an interface in relation to other network
elements)
It is assumed that:
The commissioning tests are concentrated on the function of the HW. This limits the
commisioning test to simply a function test.
This is according to the requirements for modern communication systems regarding
self-tests, and a quick and economic commissioning procedure. As the function test is
based on self-test routines a high degree of reliability is achieved.
1.1.2
Test Strategy
The commissioning tests are based on the production end-test which is carried out for
each BTSE in the customer configuration.
The production end-tests are documented in a report which is included in the BTS
delivery, and attached to the site-specific documentation.
The commissioning and unit acceptance test can therefore be limited to a simple function test.
This checks the above-mentioned aims and can also check whether damage has
occured during transport.
Any further tests or measurements must only be carried out if suspicion of a fault is
proved during the function test.
1.1.3
1.1.3.1
Using the ITMN
Required knowledge
Only trained personnel should carry out the installation and installation tests.
1.1.3.2
Test Equipment
The test equipment and tools required for the tests are described in the corresponding
chapters.
A30808-X3247-B349-1-7630
BS11 – 1
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
1.1.3.3
Procedure in the Event of Faults
If faults occur in on-line operation they should be localized and cleared in accordance
with the instructions in the User Manual (UMN).
1.1.3.4
Procedure in the Event of Serious Faults
Serious faults are those which are not dealt with in the UMN. First the specialist in the
installation team should try to clear the fault. If the installation technician is not qualified
to eliminate serious faults, a fault report must be filled out, providing the following information in detail:
–
description of the test step attempted
–
description of the system response
–
description of any system activities taking place at the same time, e.g. work done by
other testers during modifications to hardware or software
The fault report must be sent to the Technical Assistance Center (TAC).
1.1.3.5
Dealing with Defective BTSE
If a BTSE should prove to be defective, it should be sent in appropriate packing to the
repair center with the following information:
BS11 – 2
–
Name and code number of the BTSE
–
Description of the fault
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
1.1.3.6
ITMN: BTSE BS11
Installation Test Sequence
START
Visual Check of
BTSE-Mechanics
Visual Check of
BTSE-Electrics
Preparations for
Offline Tests
Execution of
Offline Tests
Preparation /
Execution
of Online Tests
END
Fig. 1.1.1 Installation Test Sequence
A30808-X3247-B349-1-7630
BS11 – 3
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
1.1.4
1.1.4.1
Safety Instructions
System Voltages
The BTSE requires a power supply voltage from 83 Vac to 265 Vac with frequency from
45 Hz to 65 Hz.
1.1.4.2
Changing Fuses
Fuses may only be changed by operater. Only authorized fuses as given in the manual
may be used. Fuses are to be changed as described in this manual.
1.1.4.3
Grounding of Modules / Racks
The BTSE must be plugged in correctly to ground it before power is switched on. Ground
connections between racks must be plugged in correctly.
1.1.4.4
CE Declaration of Conformity
The CE declaration of conformity for the product will be fulfilled if the setup and cabling
is undertaken in accordance with the specification in the manual and the documentation
listed there, such as mounting instructions, cable lists etc.Where necessary, account
should be taken of project-specific documentation.
Deviations from the specifications or independent changes during setup, such as use of
cable types with lower screening values, for example, can lead to the CE requirements
being violatad. In such cases the CE declaration of conformity is invalidated and the
responsibility passes to the person who has caused the deviations.
1.2
Visual Inspection of BTSE mechanics
All of the visual checks of the BTSE installation mechanical part are listed below.
1.2.1
BS11 – 4
BS - 11 i/900.1
–
Check that the BTSE has been fastened to the wall or pole in compliance with the
safety conditions (refer to Micro BTS-IS para. 2.1). In particular, make sure that the
wall or pole is capable of supporting the weight of the BTSE and the stresses due to
wind load.
–
Check that the BTSE code is correct: it must be 134-1791/01.
–
Check that the solar shield is the correct color and that it has been correctly
mounted.
–
Where installation of the tilting mechanism is foreseen, check that the inclination is
correct.
–
Check that the antenna panel has been correctly mounted.
–
Check that all cables necessary for operation are present and that they have been
passed through the raceways.
–
Check that the raceways for cable passage have been correctly positioned and
fastened.
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
–
1.2.2
1.3
ITMN: BTSE BS11
Check that the connector panel closing cover with relative wrench is present.
BS - 11 e/900.1
–
Check that the BTSE has been fastened to the wall or pole in compliance with the
safety conditions (refer the IMN). In particular, make sure that the wall or pole is
capable of supporting the weight of the BTSE and the stresses due to wind load.
–
Check that the BTSE code is correct: it must be 134-1791/02.
–
Check that the solar shield is the correct color and that it has been correctly
mounted.
–
Check that the dummy panel has been correctly mounted.
–
Check that all cables necessary for operation are present and that they have been
passed through the raceways.
–
Check that the raceways for cable passage have been correctly positioned and
fastened.
–
Check that the antenna (external) has been correctly installed. Where installation of
the tilting mechanism is foreseen, check that the inclination is correct.
–
Check that the connector panel closing cover with relative wrench is present.
Visual Inspection of BTSE Electric Installation
All of the visual checks of the BTSE installation electrical part are listed below.
1.3.1
BS - 11 i/900.1
Open the connector panel cover and check that the following cables are present and
correctly connected:
1.3.2
–
power supply
–
PCM
–
RF
BS - 11 e/900.1
–
Carry out the checks indicated in section 5.1.
–
Check that the antenna cable has been correctly connected (Fig. 5.1.)
–
Check that the antenna cable has been grounded at the top, in the middle and at the
bottom.
–
Check that the coaxial lightening discharges are present on both antenna cables.
–
Check the grounding of the cable guiding-slit plate when present.
–
Check that the antenna is correctly positioned and has the exact tilting value.
A30808-X3247-B349-1-7630
BS11 – 5
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
Fig. 1.3.1 Antenna Cabling (example)
BS11 – 6
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
1.3.3
ITMN: BTSE BS11
Technical Data
Technical Data are listed in Tab. 1.1
OBJECT
BS-11 i/900.1
BS-11 e/900.1
Weight
~ 23 kg
~ 23 kg
Volume
0,5x0,45x0,13 (mm)
0,5x0,45x0,13 (mm)
Input AC Power
83 ÷ 265 Vac
83 ÷ 265 Vac
Watts
80W
250W
Operating temperature
-45° to +45°C
-45° to +45°C
Frequency uplink
880-915 MHz
880-915 MHz
Frequency downlink
925-960 MHz
925-960 MHz
TRX_max per rack
TRX_max per microcell
Antenna
Internal
External
TX Power
M1, M2, M3 and 2W
GSM Power Classes
M1, M2, M3 and 2W
GSM Power Classes
Tab. 1.3.1 Technical Data: BS-11i and BS-11e
1.3.4
Power Supply Check
Verify the presence of the power supply voltage and that its value is 230 VAC – 50 Hz
or 110 VAC – 60 Hz.
1.3.5
Grounding Check
Measure the ground resistance value between the grounding screw placed on the BTSE
and the grounding system ground plate. The resistance value must be less than or
equal to 5W.
1.3.6
PCM Check
Verify the presence of the PCM flux and, if necessary, remove the line terminators or
disconnecting switches present in the junction box.
1.3.7
RF Cables Check (only in case of external antenna)
Verify that the antenna and cable VSWR is less than 1.5.
1.3.8
Fuses
Four fuses are mounted in the connection panel. Their functions are listed in Tab. 1.2.
A30808-X3247-B349-1-7630
BS11 – 7
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
FUSE
TYPE
F1
10 A delayed
Protects TRX0 power supply
F2
10 A delayed
Protects TRX0 power supply
F3
10 A delayed
Protects TRX1 power supply
F4
10 A delayed
Protects TRX1 power supply
Tab. 1.2
1.4
FUNCTION
Fuses
Abis Interface
The BTSE is pre-set with 120 Ohm impedance at the factory.
It is possible, however, to change the impedance value and move it to 75 Ohm.
Proceed as follows to change the impedance:
–
Open the connector panel cover, using the appropriate wrench supplied, to gain
access to the panel.
–
Unscrew (Fig. 1.1.) the 4 screws (1) and remove the cover (2), thus gaining access
to the protection circuit.
–
Unscrew the screw (1, Fig. 1.2.).
–
Lift up the protection circuit using the two handles (2, Fig. 1.2.).
–
Set the switches on the mini dip-switch SW3 Fig. 1.3.) as indicated in Tab. 1.1. (“75
Ohm impedance” column).
The jumpers for the connection with 75 Ohm impedance are placed in the inner of the
entry cables cover.
DIP-SWITCH
75 Ohm IMPEDANCE
120 Ohm IMPEDANCE
Tab. 1.1
SW3 dip-switch configuration
Carry out the connections indicated in Fig. 1.2. on the T0B1 ÷ TB04 terminal board.
BS11 – 8
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
TERMINAL BOARD
75 Ohm IMPEDANCE
120 Ohm IMPEDANCE
TB01
2-3
NO JUMPER
TB02
2-3
NO JUMPER
TB03
2-3
NO JUMPER
TB04
2-3
NO JUMPER
Tab. 1.2
Fig. 1.1
A30808-X3247-B349-1-7630
ITMN: BTSE BS11
TB01 ÷ TB04 configuration
Connection panel (for external antenna)
BS11 – 9
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
pin 2
pin 4 pin 6
pin 8
pinning of J01 and J02
pin 1
pin 3 pin 5
Fig. 1.2
BS11 – 10
pin 5
Protection circuit
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
Fig. 1.4.3 SW3 /The black square stands for toggle) and TB01 ÷ TB04
–
Set the protection circuit in its slot making sure that the plastic handles do not go
between the connector pins.
–
Place the protection circuit cover in position and tighten the 4 fastening screws.
–
Close the connector panel cover with the appropriate wrench.
A30808-X3247-B349-1-7630
BS11 – 11
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
1.5
Preparation for Offline Tests
The purpose of this chapter is to execute all commissioning activities for
checking the delivery quality and quantity of the BTSE on site.
The following steps have to be executed to start the system:
1. Obtain the recommended test and test equipment
2. Preparation of the test and test equipment
3. BTSE power on
4.Start of LMT
5. Download of the Safety SW
6. Creation of HW related MO
7. Set attributes for BTSE
8. Offline tests
Finally all documents must be filled in and all activities must be confirmed by the
customer.
1.5.1
Recommended Test Equipment and Tools
Several devices, instruments, accessories and utensils have to be
provided and prepared for commisioning on site.
1.5.1.1
Test equipment
The equipment listed below has to be present for call simulation and verification of
correct operation.
SBS Abis Simulator
BS11 – 12
HW:
Portable PC min.80386DX, 16Bit AT, 4 MByte RAM
120MByte HD
VGA/SVGA 640x480 Monitor
Mouse
2x serial IF
1x parallel IF, 1hour Battery Time
Full-Size Expansion Slot for MA-10 Card
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
SW:
MA-10 Base Package, Abis application
Cable:
120Ω-MA10-Card<->Abis
75Ω-MA10-Card<->Abis
Local Maintenance Terminal LMT
HW:
Portable PC min.80386DX, 16Bit AT, 4 MByte RAM
120MByte HD
VGA/SVGA 640x480 Monitor
Mouse
2x serial IF
1x parallel IF, 1hour Battery Time
Full-Size Expansion Slot for V.11-IF->EICON-CARD:X.21-Level1/LAPBLevel2
SW:
MS-DOS-5.0 or higher
OSI-Gateway-V3R1
LMT Version:see actual SW Release Note
Virus Scanner e.g. McAFEE-V117
Cable: 15-PIN (NE) - 26PIN (LMT)
Spectrum Analyser HP 8594A/E
HW:
HP8594A/E
Option:004/010/021/101/102/105
SW:
GSM: HP 85715B Personality Card
DCS: HP 85722B Personality Card
Cable:
BNC_male-SMA_male: e.g.RG58
Adapter:
N_male-BNC_female
MS_BS RF Coupling BOX
HW:
Cable:
BNC_male-BNC_male (MS)
3x:7/16_male-N_male (RX/TX)
Adapter:
A30808-X3247-B349-1-7630
MS_BS-Coupling-Box (RF)
7/16_male-N_male
Tool:
BS11 – 13
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
Absorber 20dB/25Watt
50 Ω Termination N_male
Mobile Station MS
HW:
GSM-P1
GSM-S1 +CarKit
GSM-S3 +CarKit
DCS-PT-11+CarKit
DCS Mercury one-to-one plus Car Kit
SW:
Tracer SW-P1
Test-SIM
Test Plug-In SIM
Multimeter
HW:
1.5.1.2
SIEMENS Multimeter
Tools
Special tools for commissioning activities on site are listed below.
IC Extraction Tools
IC-Extraction Tool for DIL-EPROM
-IC-Extraction Tool for PLCC
Antistatic Set
for ESD Module Handling
SMA Tool
for Semi-rigid Cable Connectors
SMC Tool
for Semi-rigid Cable Connectors
Semi Rigid Bending Tool
for Semi rigid cable connection
TDMA Measuring Tools (Tests with HP 8594A/E) and Trigger Adapter
BS11 – 14
HW:
2 Measuring cable with BNC-Plugs male (sufficient length)
Adapter SMC male - BNC female
Trigger adapter for TAD at MCLK or LI
(50-pins AMP-Plug with 2 x BNC-Plug female )
2 Adapter N-Connector male - BNC female
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
1.5.2
1.5.2.1
ITMN: BTSE BS11
HP 8590 series spectrum analyser operating manual
User´s Guide HP85715B GSM900 Transmitter Measurement Personality
User´s Guide HP 85722B DCS1800 Transmitter Measurement Personality
Preparation and Presetting of Test Equipment
Test equipment
For minimum test time and correct test results the devices
have to be prepared on site.
Spectrum Analyzer
HW: the HP8594A/E needs a warm-up time of 20 minutes depending on the
available options.
The display shows "OVEN COLD" during the heating phase. Afterwards a
CALIBRATION has to be carried out for defined measurement execution.
SW: The SW of GSM/DCS card has to be installed in advance.
Cable:
For special tests, e.g."Power versus Time" a BNC loop at the
backplane has to be provided:
GATE-OUTPUT(TTL) to EXTERN TRIGGER INPUT
The cable from CCLK(TAD) to GATE-INPUT(TTL)
for TDMA-FRAME Trigger has to be connected.
See analyzer operating manual for more detailed information.
1.5.2.2
Software (SW)
For all tests only released SW (corresponding to the BTSE HW/SW release) is allowed
to be running on the test equipment (TE).
1.5.2.3
Boot Software/Firmware (SW/FW)
For all tests only the released SW is allowed to be running on the BTSE corresponding
to the BTSE HW/SW/FW release/revision.
1.5.3
1.5.4
1.5.4.1
Connections
–
Open the connector panel cover, using the appropriate wrench supplied, to gain
access to the panel itself (Fig. 1.1.).
–
Unscrew the 4 screws (1) and remove the cover (2), to gain access to connector J02
(Fig. 1.2.).
BTSE Power ON
Power On
Power the BTSE by setting the ON/OFF switch to ON.
NOTE:
A30808-X3247-B349-1-7630
After having disconnected the power from the BTSE, it is necessary to wait
a couple of seconds before powering it.
BS11 – 15
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
1.5.4.2
LED Indication
The SL01 LED on the connector panel must be illuminated with green light. This means
that the BTSE is connected to the network.
BS11 – 16
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
2 Software Download and Activation
1. Switch on power of BS11
2. Activate LMT and Login as Administrator and Enter the PASSWORD
(default=admin)
3. a. MBTS Phase 1: Warm up
b. MBTS Phase 2: Normal (after a few minutes)
4. Download of safety SW
Software -->Download-->Browse:
(the Download window appears)
select the file btsbmcXX.swi
(XX=version numbe)r
-->ok-->start Download
wait about 15’
- after Download:--> Cancel (100% readed)
- after 1’: LMT shows:
MBTS Phase: 1 Load SMU SAFETY
wait about 5’
5. Creation of the objects:
LMT-window shows MBTS Phase: 2 wait Min Config
LI-->Create Obj: select desired properties-->Send-->o.k.
GPSU-->Create Obj-->send-->o.k.
ALCO-->Create Obj-->send-->o.k.
CCLK-->Create Obj-->send-->o.k.
BTSU-->SET Attributes: select desired properties-->send-->o.k.-->cancel
BBSIG 0-->Create Obj-->use default properties-->send-->o.k.
PA_0-->Create Obj-->select desired properties-->send-->o.k.
6. Configuration
-->Get Attribute-->E.S.N: if error message appears-->go:step 7, if not: step 9
-->Get Attribute-->CALIBRATION: if error message appears-->go:step XY, if
not: step YY
7. Logoff-->Logon-->Factory-->E.S.N.: enter values according to the BS11
label
135
Code
- 2044
Sequence
Number
/ 02.
Edition
Number
. 07
Version
Number
+Serial-Number
-->send-->o.k.-->cancel
A30808-X3247-B349-1-7630
IN – 17
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
8.
Configuration-->SET Attributes-->Calibration: enter for
Chain 1: 0
Chain 2: 0
PLL Calibration: 1024
Antenna Type: External or Internal
-->send-->o.k.-->cancel
9.
LMT window:
MBTS phase: Load from BSC
If the connection between BS11 and BSC already exists and the BTSU parameters are stored in the BSC (TEI...)
an automatic download from BSC to BTSE is started
if not: -->10
10. Download from LMT
- Operator Access-->Logoff-->Logon-->Administrator:Password
- Software-->Download-->Browse:
-->select the desired SW-Load Header
- o.k.-->start Download
wait about 15’
- after Download: Cancel (100% reached)
after 1’: LMT shows:
MBTS Phase: 1 Load SMU SAFETY
wait about 5’
IN – 18
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
3 Execution of Offline Tests
3.1
3.1.1
RF and Function Tests
Purpose of the Abis Simulation on the MA-10 Card
The Mobile Radio Analyzer MA-10 is used for
offline functional tests on site.
A database download has to be done with the MA-10
after succesfull creation of HW related objects.
The DB download allows to execute two test procedures:
1. BERT test with MS loop.
2. Voice test with MA-10 loop.
3.1.2
Preparation of the Abis Simulation
The Abis Simulation contains a MA-10 Card with SW on disk and the
application SW Abis Simulation Ext. SIEMENS. The SW requires a DOS
computer with WINDOWS 3.X.
The MA-10 has to be installed and tested in advance,
according to the Installation Manual BN 3032/98.80(W&G).
In addition refer to the Operating Manual BN 3032/94.08(W&G)
of Abis Simulation Ext. SIEMENS.
The neccessary cable for the connetion to the BTSE Abis interface
has to be provided.
The IMSI of TestSim, which will be used for the MS, has to be
entered in "SAG.INI" -File (one of the ABIS SIMULATION EXT.SIEMENS files) in
advance.
Note: See also additional information in the help menue of the simulator.
3.1.3
Connection of Test equipment (TE)
To achieve reliable measurement results the connections must be plugged correctly and
faultless contact must be guaranteed.
The complete equipment has to be connected in the following order:
1.
Attenuator (20dB/25W)
to HYCOM/DUCOM/DUKIT(ANT)
2.
HYCOM/DUCOM/DUKIT (Test)
to RF-(Connection-)Box(Test)
3.
RF-Box(RXAMOD/RXAMCO)
to RXAMOD/RXAMCO (RFin)
4.
RXAMOD(RFout)
to RCAP(RX0-5)(with specific attenuation)
RXAMCO (out)
to TPU (in)
5.
MS
to RF-Box(MS)
6.
MA-10 Card
to RCAP/OVPT-Abis
A30808-X3247-B349-1-7630
BS11 – 19
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
3.1.4
Check BTSE Phase
Before you start the Abis Simulation check the phase of the BTSE at the LMT. It must
be in Phase three.
BS11 – 20
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
3.2
ITMN: BTSE BS11
Start of Abis Simulation
Start MA-10 control
WINDOWS has to be started first before the MA-10 is started.
The start of Abis Simulation requires the start of MA-10 Control.
The HW and SW performs the necessary boot procedure automatically.
Click on the MA-10 Control icon
SIEMENSAbisSim
Application Start
The ABIS SIMULATION EXT SIEMENS Window appears.
SIEMENSAbisSim Phase x (Select from application field).
Load Test File
The released test sequence has to be loaded.
File
Load Test File...

OK
Wait a few seconds for the loading procedure to finish (the icons get some
colours).
Choose released sequencefile ......tes.
Configuration MA-10
The additional Abis parameters have to be set.
Configuration
MA-10...
Line interface...

OK
A30808-X3247-B349-1-7630
BS11 – 21
ITMN: BTSE BS11
Installation Test
Base Transceiver Station Equipment
Configuration simulator
The current TestSim IMSI for the mobile station corresponding to the system
standard GSM 900/DCS 1800 and the customer has to be choosen.
Only the TestSim IMSI that has been entered in the "SAG.INI" file can be
choosen.
Configuration
Call Parameter...

Apply
Close
Now the MA-10 is ready for the data base download procedure.
Configuration of the BTSE-type
The special BTSE parameters have to be set.
Configuration
BTS Equipment....
BTSE
< select: Network Type, No. of BTS and TRX>
Signalling
< select: Sign. channel type and BTSM as created in BTSE>
Apply
Close
Configuration of BCCH
The network codes have to be entered.
Configuration
BCCH Info...
LAC/CI
< Enter the corresponding network codes>
Apply
Close
BS11 – 22
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
Set site specific test parameter
Additionally parameter set for current site configuration will be performed.
Database
Edit

OK
Now the Interactive Editor Window shows the available parameters which can
be set depending on the configuration data.Select proper menues and parameter values
Typical Parameter which might be set (depending on the configuration):
Abis-Parameter:
1. BTSM_PCMSlot (set identically to configuration data (LMT))
2. BTSM_Tei (set identically to configuration data (LMT))
Um-Parameter:
3. Frequencies
4. NumBTS
5. NumTRX
6. BCCH_TRX
7. MsTxPowerMax
8.TXMaxPowerRed_BTS
Country/SIM-Parameter:
9. MobileCountryCode (see TestSim IMSI)
10. MobileNetworkCode (see TestSIM IMSI)
11. LocationAreaID
Start of Simulation
Test
Start
END
A30808-X3247-B349-1-7630
BS11 – 23
ITMN: BTSE BS11
BS11 – 24
Installation Test
Base Transceiver Station Equipment
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
3.3
ITMN: BTSE BS11
Database download
Start of Database download
Execution of database download.
Test
Start
OK
The MA-10 SW performs the boot and download procedure.
The Log-Output [xxx.sqz] window appears.
Check for correct parameter setting
Restart of Test Sequence
Start (Wait approximately 20 s)
OK
OK
The DB-Alignment window appears after about 20 seconds.
Afterwards the system information window will appear .
After the alignement procedure the SPA-LED at TPU and SPA-LED at BBSIG
are flashing.
END
A30808-X3247-B349-1-7630
BS11 – 25
ITMN: BTSE BS11
BS11 – 26
Installation Test
Base Transceiver Station Equipment
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
3.4
ITMN: BTSE BS11
Call check with MA-10-Loop
This test provides a loop check via the MS.The MA-10 performs a MTC. The loop back
can be heard with a delay of a few seconds after the connection to the MS has been
established.
MA-10 Loop Configuration
Configuration
Measurement
select: Measurement mode = TCH Loop
- desired parameters
Apply
Close
Start Test
Test
Start
Stop Test
Test
Stop
END
A30808-X3247-B349-1-7630
BS11 – 27
ITMN: BTSE BS11
BS11 – 28
Installation Test
Base Transceiver Station Equipment
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
3.5
ITMN: BTSE BS11
Bit Error Rate (BERT) Test with MS-Loop
This test provides a BERT Test available on every equipped TRX and timeslot.
The MA-10 performs a MTC.After establishment of the connection to the MS
with the TestSim, the loop into the MS allows the decoding of sent messages.
BERT
Configuration
Measurement
select:
- Measurement mode = BERT MS Loop
- desired parameters
Apply
Close
Start Test
Test
Start
END
A30808-X3247-B349-1-7630
BS11 – 29
ITMN: BTSE BS11
BS11 – 30
Installation Test
Base Transceiver Station Equipment
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
3.6
ITMN: BTSE BS11
Settings at HP 8594A
Some additional RF-Measurements with the Spectrum Analyser (here HP 8594A) are
useful to check the BTSE-Function.
Start the Abis-Simulation and check the SW-Card (Plug in Card, HP 85715B GSM 900
Measurements Personality Card or HP 85722 DCS 1800 Measurements Personality
Card) before measurements are executed.
After the warm-up-phase of the spectrum analyser startthe self-calibration routine.
Approximately 15 minutes later disappeares the "OVEN COLD" message from screen.
The following blocks show four tests (select from HP-Menu with Key or Soft-Keys):
Carrier Power
TRIG
EXTERNAL
MODE
DCS 1800/GSM Analyser
Physical Channel
Auto Function
Auto ARFCN
MODE
DCS 1800/GSM Analyser
Power
Carrier Power
Result: Mean TXRX Power in dBm.
P vs T Frame
TRIG
EXTERNAL
MODE
DCS 1800/GSM Analyser
Physical Channel
Auto Function
Auto ARFCN
MODE
DCS 1800/GSM Analyser
Power vs Time
P vs T Frame
Result: Limit Pass or Limit Fail
A30808-X3247-B349-1-7630
BS11 – 31
ITMN: BTSE BS11
Installation Test
Base Transceiver Station Equipment
P vs T Timeslot
TRIG
EXTERNAL
MODE
DCS 1800/GSM Analyser
Physical Channel
Auto Function
Auto ARFCN
MODE
DCS 1800/GSM Analyser
Power vs Time
P vs T Timeslot
Result: Limit Pass or Limit Fail
Output of spectrum switching transients
TRIG
EXTERNAL
MODE
DCS 1800/GSM Analyser
Physical Channel
Auto Function
Auto ARFCN
MODE
DCS 1800/GSM Analyser
Out RF Spectrum
RF Spect Transient
Transient Swept
Result: Limit Pass or Limit Fail
For more details about RF-Measurements read HP User Guide.
END
BS11 – 32
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
3.7
ITMN: BTSE BS11
RFI-Confirmation: Unit ATMN
All commissioning tasks on site for providing successful
integration have to be confirmed in the ATMN:BTSE.
A30808-X3247-B349-1-7630
BS11 – 33
ITMN: BTSE BS11
BS11 – 34
Installation Test
Base Transceiver Station Equipment
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
4 Appendix
4.1
Frequency/Channel Conversion Table
Frequency-Band
ARFCN
Number
GSM:
935-960
890-915
=>124
001 ... 124
E-GSM:
925-960
880-915
=>174
975 ... 1023
DCS 1800:
1805-1880 =>374
1710-1785
512 ... 885
PCS 1900:
1930-1990 =>299
1850-1910
512 ... 810
Tab. 4.1
4.1.1
Quantity
Frequency/Channel Conversion Table
GSM Table
Frequency (MHz)
Uplink
Downlink
890,20
935,20
890,40
ARFCN
Frequency (MHz)
Uplink
Downlink
41
898,20
943,20
935,40
42
898,40
890,60
935,60
43
890,80
935,80
891,00
ARFCN
Frequency (MHz)
Uplink
Downlink
81
906,20
951,20
943,40
82
906,40
951,40
898,60
943,60
83
906,60
951,60
44
898,80
943,80
84
906,80
951,80
936,00
45
899,00
944,00
85
907,00
952,00
891,20
936,20
46
899,20
944,20
86
907,20
952,20
891,40
936,40
47
899,40
944,40
87
907,40
952,40
891,60
936,60
48
899,60
944,60
88
907,60
952,60
891,80
936,80
49
899,80
944,80
89
907,80
952,80
10
892,00
937,00
50
900,00
945,00
90
908,00
953,00
11
892,20
937,20
51
900,20
945,20
91
908,20
953,20
12
892,40
937,40
52
900,40
945,40
92
908,40
953,40
13
892,60
937,60
53
900,60
945,60
93
908,60
953,60
14
892,80
937,80
54
900,80
945,80
94
908,80
953,80
15
893,00
938,00
55
901,00
946,00
95
909,00
954,00
16
893,20
938,20
56
901,20
946,20
96
909,20
954,20
Tab. 4.2
GSM Table
A30808-X3247-B349-1-7630
BS11 – 35
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
ARFCN
Frequency (MHz)
Uplink
Downlink
17
893,40
938,40
18
893,60
19
ARFCN
Frequency (MHz)
Uplink
Downlink
57
901,40
946,40
938,60
58
901,60
893,80
938,80
59
20
894,00
939,00
21
894,20
22
ARFCN
Frequency (MHz)
Uplink
Downlink
97
909,40
954,40
946,60
98
909,60
954,60
901,80
946,80
99
909,80
954,80
60
902,00
947,00
100
910,00
955,00
939,20
61
902,20
947,20
101
910,20
955,20
894,40
939,40
62
902,40
947,40
102
910,40
955,40
23
894,60
939,60
63
902,60
947,60
103
910,60
955,60
24
894,80
939,80
64
902,80
947,80
104
910,80
955,80
25
895,00
940,00
65
903,00
948,00
105
911,00
956,00
26
895,20
940,20
66
903,20
948,20
106
911,20
956,20
27
895,40
940,40
67
903,40
948,40
107
911,40
956,40
28
895,60
940,60
68
903,60
948,60
108
911,60
956,60
29
895,80
940,80
69
903,80
948,80
109
911,80
956,80
30
896,00
941,00
70
904,00
949,00
110
912,00
957,00
31
896,20
941,20
71
904,20
949,20
111
912,20
957,20
32
896,40
941,40
72
904,40
949,40
112
912,40
957,40
33
896,60
941,60
73
904,60
949,60
113
912,60
957,60
34
896,80
941,80
74
904,80
949,80
114
912,80
957,80
35
897,00
942,00
75
905,00
950,00
115
913,00
958,00
36
897,20
942,20
76
905,20
950,20
116
913,20
958,20
37
897,40
942,40
77
905,40
950,40
117
913,40
958,40
38
897,60
942,60
78
905,60
950,60
118
913,60
958,60
39
897,80
942,80
79
905,80
950,80
119
913,80
958,80
40
898,00
943,00
80
906,00
951,00
120
914,00
959,00
------
------
------
------
------
------
121
914,20
959,20
------
------
------
------
------
------
122
914,40
959,40
------
------
------
------
------
------
123
914,60
959,60
------
------
------
------
------
------
124
914,80
959,80
Tab. 4.2
BS11 – 36
GSM Table
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
4.1.2
ITMN: BTSE BS11
E GSM Table
ARFCN
Frequency (MHz)
Downlink
975
880,20
925,20
976
880,40
977
Frequency (MHz)
Uplink
Downlink
1000
885,20
930,20
925,40
1001
885,40
930,40
880,60
925,60
1002
885,60
930,60
978
880,80
925,80
1003
885,80
930,80
979
881,00
926,00
1004
886,00
931,00
980
881,20
926,20
1005
886,20
931,20
981
881,40
926,40
1006
886,40
931,40
982
881,60
926,60
1007
886,60
931,60
983
881,80
926,80
1008
886,80
931,80
984
882,00
927,00
1009
887,00
932,00
985
882,20
927,20
1010
887,20
932,20
986
882,40
927,40
1011
887,40
932,40
987
882,60
927,60
1012
887,60
932,60
988
882,80
927,80
1013
887,80
932,80
989
883,00
928,00
1014
888,00
933,00
990
883,20
928,20
1015
888,20
933,20
991
883,40
928,40
1016
888,40
933,40
992
883,60
928,60
1017
888,60
933,60
993
883,80
928,80
1018
888,80
933,80
994
884,00
929,00
1019
889,00
934,00
995
884,20
929,20
1020
889,20
934,20
996
884,40
929,40
1021
889,40
934,40
997
884,60
929,60
1022
889,60
934,60
998
884,80
929,80
1023
889,80
934,80
999
885,00
930,00
-----
-----
-----
Tab. 4.3
E-GSM Table
A30808-X3247-B349-1-7630
Uplink
ARFCN
BS11 – 37
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
4.1.3
4.1.3.1
ARFCN
DCS Table
DCS Table Part 1/3
Frequency (MHz)
Uplink
Downlink
512
1710,2
1805,2
513
1710,4
514
ARFCN
Frequency (MHz)
Uplink
Downlink
549
1717,6
1812,6
1805,4
550
1717,8
1710,6
1805,6
551
515
1710,8
1805,8
516
1711
517
ARFCN
Frequency (MHz)
Uplink
Downlink
586
1725
1820
1812,8
587
1725,2
1820,2
1718
1813
588
1725,4
1820,4
552
1718,2
1813,2
589
1725,6
1820,6
1806
553
1718,4
1813,4
590
1725,8
1820,8
1711,2
1806,2
554
1718,6
1813,6
591
1726
1821
518
1711,4
1806,4
555
1718,8
1813,8
592
1726,2
1821,2
519
1711,6
1806,6
556
1719
1814
593
1726,4
1821,4
520
1711,8
1806,8
557
1719,2
1814,2
594
1726,6
1821,6
521
1712
1807
558
1719,4
1814,4
595
1726,8
1821,8
522
1712,2
1807,2
559
1719,6
1814,6
596
1727
1822
523
1712,4
1807,4
560
1719,8
1814,8
597
1727,2
1822,2
524
1712,6
1807,6
561
1720
1815
598
1727,4
1822,4
525
1712,8
1807,8
562
1720,2
1815,2
599
1727,6
1822,6
526
1713
1808
563
1720,4
1815,4
600
1727,8
1822,8
527
1713,2
1808,2
564
1720,6
1815,6
601
1728
1823
528
1713,4
1808,4
565
1720,8
1815,8
602
1728,2
1823,2
529
1713,6
1808,6
566
1721
1816
603
1728,4
1823,4
530
1713,8
1808,8
567
1721,2
1816,2
604
1728,6
1823,6
531
1714
1809
568
1721,4
1816,4
605
1728,8
1823,8
532
1714,2
1809,2
569
1721,6
1816,6
606
1729
1824
533
1714,4
1809,4
570
1721,8
1816,8
607
1729,2
1824,2
534
1714,6
1809,6
571
1722
1817
608
1729,4
1824,4
535
1714,8
1809,8
572
1722,2
1817,2
609
1729,6
1824,6
536
1715
1810
573
1722,4
1817,4
610
1729,8
1824,8
537
1715,2
1810,2
574
1722,6
1817,6
611
1730
1825
538
1715,4
1810,4
575
1722,8
1817,8
612
1730,2
1825,2
539
1715,6
1810,6
576
1723
1818
613
1730,4
1825,4
540
1715,8
1810,8
577
1723,2
1818,2
614
1730,6
1825,6
Tab. 4.1.4 DCS Part 1/3
BS11 – 38
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ARFCN
Frequency (MHz)
Uplink
Downlink
541
1716
1811
542
1716,2
543
ITMN: BTSE BS11
ARFCN
Frequency (MHz)
Uplink
Downlink
578
1723,4
1818,4
1811,2
579
1723,6
1716,4
1811,4
580
544
1716,6
1811,6
545
1716,8
546
ARFCN
Frequency (MHz)
Uplink
Downlink
615
1730,8
1825,8
1818,6
616
1731
1826
1723,8
1818,8
617
1731,2
1826,2
581
1724
1819
618
1731,4
1826,4
1811,8
582
1724,2
1819,2
619
1731,6
1826,6
1717
1812
583
1724,4
1819,4
620
1731,8
1826,8
547
1717,2
1812,2
584
1724,6
1819,6
621
1732
1827
548
1717,4
1812,4
585
1724,8
1819,8
622
1732,2
1827,2
Tab. 4.1.4 DCS Part 1/3
4.1.3.2
ARFCN
DCS Table Part 2/3
Frequency (MHz)
Uplink
Downlink
623
1732,4
1827,4
624
1732,6
625
ARFCN
Frequency (MHz)
Uplink
Downlink
660
1739,8
1834,8
1827,6
661
1740
1732,8
1827,8
662
626
1733
1828
627
1733,2
628
ARFCN
Frequency (MHz)
Uplink
Downlink
697
1747,2
1842,2
1835
698
1747,4
1842,4
1740,2
1835,2
699
1747,6
1842,6
663
1740,4
1835,4
700
1747,8
1842,8
1828,2
664
1740,6
1835,6
701
1748
1843
1733,4
1828,4
665
1740,8
1835,8
702
1748,2
1843,2
629
1733,6
1828,6
666
1741
1836
703
1748,4
1843,4
630
1733,8
1828,8
667
1741,2
1836,2
704
1748,6
1843,6
631
1734
1829
668
1741,4
1836,4
705
1748,8
1843,8
632
1734,2
1829,2
669
1741,6
1836,6
706
1749
1844
633
1734,4
1829,4
670
1741,8
1836,8
707
1749,2
1844,2
634
1734,6
1829,6
671
1742
1837
708
1749,4
1844,4
635
1734,8
1829,8
672
1742,2
1837,2
709
1749,6
1844,6
636
1735
1830
673
1742,4
1837,4
710
1749,8
1844,8
637
1735,2
1830,2
674
1742,6
1837,6
711
1750
1845
638
1735,4
1830,4
675
1742,8
1837,8
712
1750,2
1845,2
639
1735,6
1830,6
676
1743
1838
713
1750,4
1845,4
Tab. 4.1.5 DCS Part 2/3
A30808-X3247-B349-1-7630
BS11 – 39
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
ARFCN
Frequency (MHz)
Uplink
Downlink
640
1735,8
1830,8
641
1736
642
ARFCN
Frequency (MHz)
Uplink
Downlink
677
1743,2
1838,2
1831
678
1743,4
1736,2
1831,2
679
643
1736,4
1831,4
644
1736,6
646
ARFCN
Frequency (MHz)
Uplink
Downlink
714
1750,6
1845,6
1838,4
715
1750,8
1845,8
1743,6
1838,6
716
1751
1846
680
1743,8
1838,8
717
1751,2
1846,2
1831,6
681
1744
1839
718
1751,4
1846,4
1737
1832
683
1744,4
1839,4
720
1751,8
1846,8
647
1737,2
1832,2
684
1744,6
1839,6
721
1752
1847
648
1737,4
1832,4
685
1744,8
1839,8
722
1752,2
1847,2
649
1737,6
1832,6
686
1745
1840
723
1752,4
1847,4
650
1737,8
1832,8
687
1745,2
1840,2
724
1752,6
1847,6
651
1738
1833
688
1745,4
1840,4
725
1752,8
1847,8
652
1738,2
1833,2
689
1745,6
1840,6
726
1753
1848
653
1738,4
1833,4
690
1745,8
1840,8
727
1753,2
1848,2
654
1738,6
1833,6
691
1746
1841
728
1753,4
1848,4
655
1738,8
1833,8
692
1746,2
1841,2
729
1753,6
1848,6
656
1739
1834
693
1746,4
1841,4
730
1753,8
1848,8
657
1739,2
1834,2
694
1746,6
1841,6
731
1754
1849
658
1739,4
1834,4
695
1746,8
1841,8
732
1754,2
1849,2
659
1739,6
1834,6
696
1747
1842
733
1754,4
1849,4
Tab. 4.1.5 DCS Part 2/3
4.1.3.3
ARFCN
DCS Table Part 3/3
Frequency (MHz)
Uplink
Downlink
734
1754,6
1849,6
735
1754,8
736
ARFCN
Frequency (MHz)
Uplink
Downlink
770
1761,8
1856,8
1849,8
771
1762
1755
1850
772
737
1755,2
1850,2
738
1755,4
739
740
ARFCN
Frequency (MHz)
Uplink
Downlink
806
1769
1864
1857
807
1769,2
1864,2
1762,2
1857,2
808
1769,4
1864,4
773
1762,4
1857,4
809
1769,6
1864,6
1850,4
774
1762,6
1857,6
810
1769,8
1864,8
1755,6
1850,6
775
1762,8
1857,8
811
1770
1865
1755,8
1850,8
776
1763
1858
812
1770,2
1865,2
Tab. 4.1.6 DCS Part 3/3
BS11 – 40
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ARFCN
Frequency (MHz)
Uplink
Downlink
741
1756
1851
742
1756,2
743
ITMN: BTSE BS11
ARFCN
Frequency (MHz)
Uplink
Downlink
777
1763,2
1858,2
1851,2
778
1763,4
1756,4
1851,4
779
744
1756,6
1851,6
745
1756,8
746
ARFCN
Frequency (MHz)
Uplink
Downlink
813
1770,4
1865,4
1858,4
814
1770,6
1865,6
1763,6
1858,6
815
1770,8
1865,8
780
1763,8
1858,8
816
1771
1866
1851,8
781
1764
1859
817
1771,2
1866,2
1757
1852
782
1764,2
1859,2
818
1771,4
1866,4
747
1757,2
1852,2
783
1764,4
1859,4
819
1771,6
1866,6
748
1757,4
1852,4
784
1764,6
1859,6
820
1771,8
1866,8
749
1757,6
1852,6
785
1764,8
1859,8
821
1772
1867
750
1757,8
1852,8
786
1765
1860
822
1772,2
1867,2
751
1758
1853
787
1765,2
1860,2
823
1772,4
1867,4
752
1758,2
1853,2
788
1765,4
1860,4
824
1772,6
1867,6
753
1758,4
1853,4
789
1765,6
1860,6
825
1772,8
1867,8
754
1758,6
1853,6
790
1765,8
1860,8
826
1773
1868
755
1758,8
1853,8
791
1766
1861
827
1773,2
1868,2
756
1759
1854
792
1766,2
1861,2
828
1773,4
1868,4
757
1759,2
1854,2
793
1766,4
1861,4
829
1773,6
1868,6
758
1759,4
1854,4
794
1766,6
1861,6
830
1773,8
1868,8
759
1759,6
1854,6
795
1766,8
1861,8
831
1774
1869
760
1759,8
1854,8
796
1767
1862
832
1774,2
1869,2
761
1760
1855
797
1767,2
1862,2
833
1774,4
1869,4
762
1760,2
1855,2
798
1767,4
1862,4
834
1774,6
1869,6
763
1760,4
1855,4
799
1767,6
1862,6
835
1774,8
1869,8
764
1760,6
1855,6
800
1767,8
1862,8
836
1775
1870
765
1760,8
1855,8
801
1768
1863
837
1775,2
1870,2
766
1761
1856
802
1768,2
1863,2
838
1775,4
1870,4
767
1761,2
1856,2
803
1768,4
1863,4
839
1775,6
1870,6
768
1761,4
1856,4
804
1768,6
1863,6
840
1775,8
1870,8
769
1761,6
1856,6
805
1768,8
1863,8
841
1776
1871
Tab. 4.1.6 DCS Part 3/3
A30808-X3247-B349-1-7630
BS11 – 41
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
4.1.4
4.1.4.1
ARFCN
PCS Table
PCS Table Part 1
Frequency (MHz)
Uplink
Downlink
842
1776,2
1871,2
843
1776,4
844
ARFCN
Frequency (MHz)
Uplink
Downlink
857
1779,2
1874,2
1871,4
858
1779,4
1776,6
1871,6
859
845
1776,8
1871,8
846
1777
847
ARFCN
Frequency (MHz)
Uplink
Downlink
872
1782,2
1877,2
1874,4
873
1782,4
1877,4
1779,6
1874,6
874
1782,6
1877,6
860
1779,8
1874,8
875
1782,8
1877,8
1872
861
1780
1875
876
1783
1878
1777,2
1872,2
862
1780,2
1875,2
877
1783,2
1878,2
848
1777,4
1872,4
863
1780,4
1875,4
878
1783,4
1878,4
849
1777,6
1872,6
864
1780,6
1875,6
879
1783,6
1878,6
850
1777,8
1872,8
865
1780,8
1875,8
880
1783,8
1878,8
851
1778
1873
866
1781
1876
881
1784
1879
852
1778,2
1873,2
867
1781,2
1876,2
882
1784,2
1879,2
853
1778,4
1873,4
868
1781,4
1876,4
883
1784,4
1879,4
854
1778,6
1873,6
869
1781,6
1876,6
884
1784,6
1879,6
855
1778,8
1873,8
870
1781,8
1876,8
885
1784,8
1879,8
856
1779
1874
871
1782
1877
Tab. 4.1.7 PCS Part 1/3
4.1.4.2
ARFCN
PCS Table Part 2
Frequency (MHz)
Uplink
Downlink
629
1873,6
1953,6
630
1873,8
631
ARFCN
Frequency (MHz)
Uplink
Downlink
668
1881,4
1961,4
1953,8
669
1881,6
1874
1954
670
632
1874,2
1954,2
633
1874,4
634
ARFCN
Frequency (MHz)
Uplink
Downlink
707
1889,2
1969,2
1961,6
708
1889,4
1969,4
1881,8
1961,8
709
1889,6
1969,6
671
1882
1962
710
1889,8
1969,8
1954,4
672
1882,2
1962,2
711
1890
1970
1874,6
1954,6
673
1882,4
1962,4
712
1890,2
1970,2
635
1874,8
1954,8
674
1882,6
1962,6
713
1890,4
1970,4
636
1875
1955
675
1882,8
1962,8
714
1890,6
1970,6
Tab. 4.8
BS11 – 42
PCS Part 2/3
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ARFCN
Frequency (MHz)
Uplink
Downlink
637
1875,2
1955,2
638
1875,4
639
ITMN: BTSE BS11
ARFCN
Frequency (MHz)
Uplink
Downlink
676
1883
1963
1955,4
677
1883,2
1875,6
1955,6
678
640
1875,8
1955,8
641
1876
642
ARFCN
Frequency (MHz)
Uplink
Downlink
715
1890,8
1970,8
1963,2
716
1891
1971
1883,4
1963,4
717
1889,2
1971,2
679
1883,6
1963,6
718
1889,4
1971,4
1956
680
1883,8
1963,8
719
1889,6
1971,6
1876,2
1956,2
681
1884
1964
720
1889,8
1971,8
643
1876,4
1956,4
682
1884,2
1964,2
721
1890
1972
644
1876,6
1956,6
683
1884,4
1964,4
722
1890,2
1972,2
645
1876,8
1956,8
684
1884,6
1964,6
723
1890,4
1972,4
646
1877
1957
685
1884,8
1964,8
724
1892,6
1972,6
647
1877,2
1957,2
686
1885
1965
725
1892,8
1972,8
648
1877,4
1957,4
687
1885,2
1965,2
726
1893
1973
649
1877,6
1957,6
688
1885,4
1965,4
727
1893,2
1973,2
650
1877,8
1957,8
689
1885,6
1965,6
728
1893,4
1973,4
651
1878
1958
690
1885,8
1965,8
729
1893,6
1973,6
652
1878,2
1958,2
691
1886
1966
730
1893,8
1973,8
653
1878,4
1958,4
692
1886,2
1966,2
731
1894
1974
654
1878,6
1958,6
693
1886,4
1966,4
732
1894,2
1974,2
655
1878,8
1958,8
694
1886,6
1966,6
733
1894,4
1974,4
656
1879
1959
695
1886,8
1966,8
734
1894,6
1974,6
657
1879,2
1959,2
696
1887
1967
735
1894,8
1974,8
658
1879,4
1959,4
697
1887,2
1967,2
736
1895
1975
659
1879,6
1959,6
698
1887,4
1967,4
737
1895,2
1975,2
660
1879,8
1959,8
699
1887,6
1967,6
738
1895,4
1975,4
661
1880
1960
700
1887,8
1967,8
739
1895,6
1975,6
662
1880,2
1960,2
701
1888
1968
740
1895,8
1975,8
663
1880,4
1960,4
702
1888,2
1968,2
741
1896
1976
664
1880,6
1960,6
703
1888,4
1968,4
742
1896,2
1976,2
665
1880,8
1960,8
704
1888,6
1968,6
743
1896,4
1976,4
666
1881
1961
705
1888,8
1968,8
744
1896,6
1976,6
667
1881,2
1961,2
706
1889
1969
745
1896,8
1976,8
Tab. 4.8
PCS Part 2/3
A30808-X3247-B349-1-7630
BS11 – 43
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
4.1.4.3
ARFCN
PCS Table Part 3
Frequency (MHz)
Uplink
Downlink
746
1897
1977
747
1897,2
748
ARFCN
Frequency (MHz)
Uplink
Downlink
768
1901,4
1981,4
1977,2
769
1901,6
1897,4
1977,4
770
749
1897,6
1977,6
750
1897,8
751
ARFCN
Frequency (MHz)
Uplink
Downlink
790
1905,8
1985,8
1981,6
791
1906
1986
1901,8
1981,8
792
1906,2
1986,2
771
1902
1982
793
1906,4
1986,4
1977,8
772
1902,2
1982,2
794
1906,6
1986,6
1898
1978
773
1902,4
1982,4
795
1906,8
1986,8
752
1898,2
1978,2
774
1902,6
1982,6
796
1907
1987
753
1898,4
1978,4
775
1902,8
1982,8
797
1907,2
1987,2
754
1898,6
1978,6
776
1903
1983
798
1907,4
1987,4
755
1898,8
1978,8
777
1903,2
1983,2
799
1907,6
1987,6
756
1899
1979
778
1903,4
1983,4
800
1907,8
1987,8
757
1899,2
1979,2
779
1903,6
1983,6
801
1908
1988
758
1899,4
1979,4
780
1903,8
1983,8
802
1908,2
1988,2
759
1899,6
1979,6
781
1904
1984
803
1908,4
1988,4
760
1899,8
1979,8
782
1904,2
1984,2
804
1908,6
1988,6
761
1900
1980
783
1904,4
1984,4
805
1908,8
1988,8
762
1900,2
1980,2
784
1904,6
1984,6
806
1909
1989
763
1900,4
1980,4
785
1904,8
1984,8
807
1909,2
1989,2
764
1900,6
1980,6
786
1905
1985
808
1909,4
1989,4
765
1900,8
1980,8
787
1905,2
1985,2
809
1909,6
1989,6
766
1901
1981
788
1905,4
1985,4
810
1909,8
1989,6
767
1901,2
1981,2
789
1905,6
1985,6
Tab. 4.9
BS11 – 44
PCS Part3/3
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
4.2
ITMN: BTSE BS11
Binary-HEX-Decimal Table
BINARY
DECIMAL
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
10
1011
11
1100
12
1101
13
1110
14
1111
15
Tab. 4.1
4.3
HEX
Binary-HEX-Decimal Table
Power/Level Conversion
The formula for power calculation:
Lp[dBm] = 10lg(Px/P0)
Px[Watt] = 10-3
Lp[+dBm]
Px[Watt]
10-3
10
10-2
20
10-1
30
33
37
39
Tab. 4.1
A30808-X3247-B349-1-7630
Power conversion table
BS11 – 45
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
Lp[+dBm]
40
10
44
25
46
40
47
50
50
100
Tab. 4.1
4.4
BS11 – 46
Px[Watt]
Power conversion table
+ 3dB
≅
factor
+ 5dB
≅
factor
+10dB
≅
factor
10
Used Expressions
-48V
-48V for test adapter
12V
+12 Volt
1ER-3
bit error rate >10-3 port 1
1ER-6
bit error rate > 10-6 port 1
1RAI
remote alarm indication port 1
2RAI
remote alarm indication port 2
2ER-3
bit error rate 10-3 port 2
2ER-6
bit error rate 10-6 port 2
5V
+5 Volt
A30808-X3247-B349-1-7630
Installation Test
Base Transceiver Station Equipment
ITMN: BTSE BS11
Abbreviations
ACTAM
acom+txamod=>HYCOM
ARFCN
absolute radio frequency channel number
BCCH
broadcast control channel
BERT
bit error ratio
BTS
base transceiver station
BTSE
base transceiver station equipment
BTSM
BTS site manager
FW
firmware
HW
hardware
IMSI
international mobile subscriber identity
LAC
local area code
MO
managed object
MS
mobile station
MTC
mobile terminating call
NE
network element
O&M
operation and maintenance
SW
software
TAC
technical assistance center
TCH
traffic channel
TDMA
time devision multiple access
TE
test equipment
TEI
terminal endpoint identifier
UMN
user manual
A30808-X3247-B349-1-7630
BS11 – 47
ITMN: BTSE BS11
BS11 – 48
Installation Test
Base Transceiver Station Equipment
A30808-X3247-B349-1-7630
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 1998:03:04 13:05:40
Producer                        : Acrobat Distiller 3.01 for Windows
Creator                         : Windows PSCRIPT
Title                           : ITMN:BTSE BS11
Modify Date                     : 1999:01:05 19:14:52
Page Count                      : 57
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools
FCC ID Filing: NE3PCS002

				
				

							
		
		

			
Navigation menu