Nokia Solutions and Networks T7GT1 2.5GHz DIVERSITY ACCESS POINT User Manual USERS MANUAL 1 OF 4

Nokia Solutions and Networks 2.5GHz DIVERSITY ACCESS POINT USERS MANUAL 1 OF 4

USERS MANUAL 1 OF 4

M APPLICANT: MOTOROLA Networks FCC ID: IHET7GT1 FCC Filing – WAP25400 MOTOwi4™ Diversity Access Point @ 2.5 GHz 1 of 1 Users Manual Exhibit 2.5GHz Diversity Access Point
NoticeWhile reasonable efforts have been made to assure the accuracy of this document, Motorola,Inc. assumes no liability resulting from any inaccuracies or omissions in this document, orfrom use of the information obtained herein. The information in this document has beencarefully checked and is believed to be entirely reliable. However , no responsibility is as-sumed for inaccuracies or omissions. Motorola, Inc. reserves the right to make changes toany products described herein and reserves the right to revise this document and to makechanges from time to time in content hereof with no obligation to notify any person of revi-sions or changes. Motorola, Inc. does not assume any liability arising out of the applicationor use of any product, software, or circuit described herein; neither does it convey licenseunder its patent rights or the rights of others.It is possible that this publication may contain references to, or information about Motorolaproducts (machines and programs), programming, or services that are not announced inyour country . Such references or information must not be construed to mean that Motorolaintends to announce such Motorola products, programming, or services in your country .CopyrightsThis instruction manual, and the Motorola products described in this instruction manual maybe, include or describe copyrighted Motorola material, such as computer programs storedin semiconductor memories or other media. Laws in the United States and other countriespreserve for Motorola and its licensors certain exclusive rights for copyrighted material, in-cluding the exclusive right to copy , reproduce in any form, distribute and make derivativeworks of the copyrighted material. Accordingly , any copyrighted material of Motorola and itslicensors contained herein or in the Motorola products described in this instruction manualmay not be copied, reproduced, distributed, merged or modified in any manner without theexpress written permission of Motorola. Furthermore, the purchase of Motorola productsshall not be deemed to grant either directly or by implication, estoppel, or otherwise, anylicense under the copyrights, patents or patent applications of Motorola, as arises by oper-ation of law in the sale of a product.Usage and Disclosure RestrictionsLicense AgreementsThe software described in this document is the property of Motorola, Inc and its licensors.It is furnished by express license agreement only and may be used only in accordance withthe terms of such an agreement.Copyrighted MaterialsSoftware and documentation are copyrighted materials. Making unauthorized copies is pro-hibited by law . No part of the software or documentation may be reproduced, transmitted,transcribed, stored in a retrieval system, or translated into any language or computer lan-guage, in any form or by any means, without prior written permission of Motorola, Inc.High Risk MaterialsComponents, units, or third -party products used in the product described herein are NOTfault -tolerant and are NOT designed, manufactured, or intended for use as on -line controlequipment in the following hazardous environments requiring fail -safe controls: the opera-tion of Nuclear F acilities, Aircraft Navigation or Aircraft Communication Systems, Air TrafficControl, Life Support, or W eapons Systems (High Risk Activities). Motorola and its sup-plier(s) specifically disclaim any expressed or implied warranty of fitness for such High RiskActivities.T rademarksMotorola and the Stylized M Logo are registered in the US P atent & Trademark Office. Allother product or service names are the property of their respective owners.Draft OCT 2006
T a b l eo fC o n t e n t sContents■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Access Point Hardware InstallationRevision History ......................................... 2Version Information ..................................... 2General information ..................................... 2Contacting Motorola ....................................... 5Errors ............................................ 5Questions and comments .................................. 524 hour support ....................................... 5Security Advice ......................................... 6W arnings and cautions ...................................... 7F ailure to comply with warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7W arnings ........................................... 7Cautions ........................................... 7Notes ............................................ 8General Safety .......................................... 9Ground the equipment .................................... 9Do not operate in an explosive atmosphere . . . . . . . . . . . . . . . . . . . . . . . . . 9K eep away from live circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Do not service or adjust alone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Use caution when exposing or handling the CR T . . . . . . . . . . . . . . . . . . . . . . . 10Do not substitute parts or modify equipment . . . . . . . . . . . . . . . . . . . . . . . . 10P otentially hazardous procedure warnings . . . . . . . . . . . . . . . . . . . . . . . . . . 10Devices sensitive to static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Special handling techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Disposal of Motorola Networks equipment in EU countries . . . . . . . . . . . . . . . . . 12Disposal of Motorola Networks equipment in non -EU countries . . . . . . . . . . . . . . . 12Third P arty Computer Software and Trademarks . . . . . . . . . . . . . . . . . . . . . . . . 13Computer Software ..................................... 13Trademarks ......................................... 13Motorola manual set ....................................... 14Ordering manuals and CD -ROMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Manual banner definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Chapter 1: IntroductionIntroduction ........................................... 1 - 2Overview ........................................... 1 - 2Manual Order ........................................ 1 - 2Product Description ..................................... 1 - 3Recommended Documents .................................. 1 - 3Abbreviations and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3Tools and Materials ....................................... 1 - 568P09277A59 -5 iOCT 2006 Draft
ContentsIntroduction ......................................... 1 - 5Tools and Materials ..................................... 1 - 5Base Control Unit Hardware Identification . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6RF Head Hardware Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6Access P oint Equipment Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8Introduction ......................................... 1 - 8B CU Hardware Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8RF Head Hardware Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 10Chapter 2: Site PreparationSite Preparation Overview .................................... 2 - 2Overview ........................................... 2 - 2Installation .......................................... 2 - 2Site Manager ........................................ 2 - 2V erification and Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2Prepare Site for Equipment Arrival . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3Description ......................................... 2 - 3Equipment Arrival ...................................... 2 - 3Procedure to Prepare the Site for the Equipment . . . . . . . . . . . . . . . . . . . . . . 2 - 3Shipping and Handling ...................................... 2 - 4Overview ........................................... 2 - 4How Equipment is Shipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4How Equipment Arrives ................................... 2 - 4Unpacking .......................................... 2 - 4Recommended Tools ..................................... 2 - 4Unpacking Diagrams ..................................... 2 - 5Unpacking a Cardboard Container or Shrink W rapped Shipment . . . . . . . . . . . . . . 2 - 7Chapter 3: Cable DescriptionsCable Descriptions ........................................ 3 - 2Overview ........................................... 3 - 2Configurations Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2Cable Installation Order ................................... 3 - 2Cable Labels ......................................... 3 - 2Cable Descriptions and P art Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3Cable Lengths ........................................ 3 - 4Earth Ground and P ower Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5Grounding Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5Power Considerations .................................... 3 - 5DC Power (RF Head) ..................................... 3 - 5Antenna Cable .......................................... 3 - 7Objective ........................................... 3 - 7Cable Label ......................................... 3 - 7Antenna Cable Pin and Signal Information . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7Remote GPS Cable ........................................ 3 - 8Objective ........................................... 3 - 8Cable Label ......................................... 3 - 8RGPS Cables ......................................... 3 - 8Mounting Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8RF GPS Cable .......................................... 3 - 10Objective ........................................... 3 - 10Cable Label ......................................... 3 - 10Surge Protection ....................................... 3 - 10Mounting Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10Ethernet Cable .......................................... 3 - 12Objective ........................................... 3 - 12ii 68P09277A59 -5Draft OCT 2006
Access P oint Hardw are Installation ContentsCable Label ......................................... 3 - 12Tools and Materials ..................................... 3 - 12Fiber Optic Cable ........................................ 3 - 13Objective ........................................... 3 - 13Cable Label ......................................... 3 - 13Cable Description and P art Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 13Customer Defined Input/Output Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14Objective ........................................... 3 - 14Cable Label ......................................... 3 - 14Cable Descriptions and P art Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14Customer Defined Input and Output Connector Pinouts . . . . . . . . . . . . . . . . . . . 3 - 15Chapter 4: Access Point Hardware InstallationInstallation Overview ...................................... 4 - 2Overview ........................................... 4 - 2Procedure Order ....................................... 4 - 2Installation Kits ....................................... 4 - 3GPS Kits ........................................... 4 - 4Connector Locations ....................................... 4 - 5Base Control Unit Connector Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5RF Head Connector Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5Base Control Unit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6Overview ........................................... 4 - 6B CU Compartments ..................................... 4 - 6Electrical .......................................... 4 - 8Battery Backup ....................................... 4 - 9Dimension and W eight .................................... 4 - 9Conduit Sizes ........................................ 4 - 9Tools and Materials ..................................... 4 - 9B CU Mounting Bracket Assembly Installation . . . . . . . . . . . . . . . . . . . . . . . . 4 - 10B CU Mounting Bracket Assembly Procedure . . . . . . . . . . . . . . . . . . . . . . . . 4 - 11Installing the B CU ...................................... 4 - 12Diversity Access P oint (DAP) RF Head Assembly Installation . . . . . . . . . . . . . . . . . . 4 - 14Overview ........................................... 4 - 14DAP RF Head ........................................ 4 - 14Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 14Dimensions and W eight ................................... 4 - 14Conduit Sizes ........................................ 4 - 14Tools and Materials ..................................... 4 - 15U -Bolt Specifications ..................................... 4 - 15RF Head Assembly Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 16Ground Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20Objective ........................................... 4 - 20General Grounding Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20B CU Grounding ....................................... 4 - 20RF Head Grounding ..................................... 4 - 20DC Power Grounding .................................... 4 - 20Antenna Grounding ..................................... 4 - 20RGPS Grounding ....................................... 4 - 21AC P ower Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23Objective ........................................... 4 - 23AC Cable Description .................................... 4 - 23Tools Required ........................................ 4 - 23AC P ower Connection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23RF Head DC P ower Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25Objective ........................................... 4 - 25DC Cable Description .................................... 4 - 2568P09277A59 -5 iiiOCT 2006 Draft
ContentsTools Required ........................................ 4 - 25DC P ower Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25Antenna Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27Objective ........................................... 4 - 27Installing Antenna Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27RGPS Cabling Installation .................................... 4 - 28Objective ........................................... 4 - 28Cable Description ...................................... 4 - 28Tools Required ........................................ 4 - 28Cable Pinout ......................................... 4 - 28RGPS Installation ...................................... 4 - 29Connecting the RGPS Cable to Lightning Arrestor . . . . . . . . . . . . . . . . . . . . . . 4 - 31RF GPS Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 34Objective ........................................... 4 - 34Tools and Materials ..................................... 4 - 34Cable Description ...................................... 4 - 34Installing RF GPS Antenna and Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 34Ethernet Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 37Objective ........................................... 4 - 37Cable Description ...................................... 4 - 37Installing Ethernet Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 37Fiber Optic Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 38Objective ........................................... 4 - 38Cable Description ...................................... 4 - 38Customer Input/Output Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 39Objective ........................................... 4 - 39Cable Descriptions ...................................... 4 - 39Customer Input and Output Connector Pinouts . . . . . . . . . . . . . . . . . . . . . . . 4 - 39Customer Defined Input/Output Cable Installation . . . . . . . . . . . . . . . . . . . . . . 4 - 39Chapter 5: Optional EquipmentOptional Band Pass Filters .................................... 5 - 2Overview ........................................... 5 - 2Filter Requirements ..................................... 5 - 2Motorola Stability Oscillator (MSO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3Overview ........................................... 5 - 3Chapter 6: What’s Next and CleanupWhat’s Next ........................................... 6 - 2Introduction ......................................... 6 - 2Clean Up Site ........................................ 6 - 2Fill Out Checklist ...................................... 6 - 2Optimize the System ..................................... 6 - 2Site Cleanup ........................................... 6 - 3Tools ............................................. 6 - 3Materials ........................................... 6 - 3Remove Debris ........................................ 6 - 3Environment ......................................... 6 - 3Installation Completion Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4Installation Completion Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4Directions .......................................... 6 - 4Installation Checklist .................................... 6 - 4Appendix A: Alternate Installation ProceduresManual RF Head Installation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 2iv 68P09277A59 -5Draft OCT 2006
ContentsOverview ........................................... A - 2DAP RF Head ........................................ A - 2Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 2Dimensions and W eight ................................... A - 2Conduit Sizes ........................................ A - 2Tools and Materials ..................................... A - 3U -Bolt Specifications ..................................... A - 3RF Head Mounting Bracket Assembly Installation . . . . . . . . . . . . . . . . . . . . . . A - 3RF Head Mounting Bracket Assembly Procedure . . . . . . . . . . . . . . . . . . . . . . A - 4Installing the RF Head .................................... A - 568P09277A59 -5 vOCT 2006 Draft
Contentsvi 68P09277A59 -5Draft OCT 2006
L i s to fF i g u r e sList of Figures■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Figure 1-1: B CU ......................................... 1 - 6Figure 1-2: RF Head ....................................... 1 - 7Figure 1-3: B CU Hardware ................................... 1 - 9Figure 1 -4: DAP RF Head Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 10Figure 2 -1: Shrink W rapped Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5Figure 2 -2: Cardboard Shipping Container . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6Figure 3 -1: Antenna Cable Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7Figure 4 -1: B CU Card Cage Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7Figure 4 -2: B CU P ower and Customer Interface Compartment . . . . . . . . . . . . . . . . . 4 - 8Figure 4 -3: B CU P ole Mounting Bracket Assembly . . . . . . . . . . . . . . . . . . . . . . . . 4 - 10Figure 4-4: U -Bolt Sizing ..................................... 4 - 16Figure 4 -5: RF Head Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 17Figure 4 -6: Typical Outdoor Grounding Diagram . . . . . . . . . . . . . . . . . . . . . . . . 4 - 21Figure 4 -7: Typical Indoor Grounding Diagram . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 22Figure 4 -8: B CU AC P ower Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 24Figure 4 -9: Base Control Unit DC P ower Connection . . . . . . . . . . . . . . . . . . . . . . 4 - 26Figure 4 -10: Connector Pins Numbering for Cables C and C1 . . . . . . . . . . . . . . . . . . 4 - 28Figure 4-11: RGPS Head ..................................... 4 - 30Figure 4 -12: Installing the Remote GPS Head . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 31Figure 4 -13: RGPS to Base Control Unit Connection Diagram . . . . . . . . . . . . . . . . . . 4 - 32Figure 4 -14: RGPS Lightning Arrestor W iring . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 33Figure 4 -15: RF GPS Installation and Components Diagram . . . . . . . . . . . . . . . . . . . 4 - 36Figure 4 -16: Ethernet Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 37Figure 4 -17: Customer Defined Input and Output Connectors . . . . . . . . . . . . . . . . . . 4 - 39Figure 5 -1: Band P ass Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2Figure 5 -2: Filter Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2Figure A -1: U -Bolt Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 3Figure A -2: RF Head Mounting Bracket Assembly . . . . . . . . . . . . . . . . . . . . . . . . A - 4Figure A -3: RF Head Side Mounting Brackets and Solar Shield . . . . . . . . . . . . . . . . . A - 8Figure A -4: Antenna to Filter RF Cable Connection Diagram . . . . . . . . . . . . . . . . . . A - 968P09277A59 -5 viiOCT 2006 Draft
List of Figuresviii 68P09277A59 -5Draft OCT 2006
L i s to fT a b l e sList of Tables■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■T able 1: Manual version history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2T able 1 -1: Abbreviations and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 4T able 1 -2: T ools and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5T able 2 -1: Recommended Unpacking T ools . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5T able 3 -1: Cable Description and P art Numbers . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3T able 3 -2: Cable Length Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4T able 3 -3: RF Head DC P ower Cable Description and P art Numbers . . . . . . . . . . . . . . . 3 - 6T able 3 -4: Cable Description and P art Numbers . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7T able 3 -5: Pin and Signal Information for Antenna Cable . . . . . . . . . . . . . . . . . . . . 3 - 7T able 3 -6: Cables Needed for RGPS Connections . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8T able 3 -7: Local GPS Cable Description and P art Numbers . . . . . . . . . . . . . . . . . . . 3 - 10T able 3 -8: Local GPS Antenna Mounting Considerations . . . . . . . . . . . . . . . . . . . . . 3 - 11T able 3 -9: Fiber Optic Cable Description and P art Number . . . . . . . . . . . . . . . . . . . 3 - 13T able 3 -10: Customer Defined I/O Cable Description and P art Numbers . . . . . . . . . . . . . 3 - 14T able 3 -11: Customer Defined Input Connector Pins 1–4 and 5–8 . . . . . . . . . . . . . . . . 3 - 15T able 3 -12: Customer Defined Input Connector Pins 9–12 and 13–16 . . . . . . . . . . . . . . 3 - 15T able 3 -13: Customer Defined Output Connector Pins 1–2 and 3–4 . . . . . . . . . . . . . . . 3 - 16T able 4 -1: Conduit Types and Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9T able 4 -2: Conduit Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 14T able 4 -3: DAP U -Bolt Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 16T able 4 -4: Pinout for Cables C and C1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 29T able 6 -1: Hardware Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 5T able A -1: Conduit Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 2T able A -2: DAP U -Bolt Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 368P09277A59 -5 ixOCT 2006 Draft
List of T ablesx 68P09277A59 -5Draft OCT 2006
L i s to fP r o c e d u r e sList of Procedures■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Procedure 2 -1: Procedure to Prepare the Site for the BTS . . . . . . . . . . . . . . . . . . . . 2 - 3Procedure 2 -2: Unpacking Equipment from a Cardboard Container or Shrink W rap . . . . . . . 2 - 7Procedure 2 -3: Procedure to Remove Outdoor Equipment from Container . . . . . . . . . . . . 2 - 7Procedure 4 -1: Procedure to Install Mounting Bracket Assembly on a P ole . . . . . . . . . . . 4 - 11Procedure 4 -2: Procedure to Install the B CU . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 12Procedure 4 -3: Procedure to Install RF Head Assembly . . . . . . . . . . . . . . . . . . . . . 4 - 17Procedure 4 -4: Procedure to Install AC P ower Cable . . . . . . . . . . . . . . . . . . . . . . . 4 - 23Procedure 4 -5: Procedure to Install DC P ower Cables . . . . . . . . . . . . . . . . . . . . . . 4 - 25Procedure 4 -6: Procedure for Installing the RGPS Head and Cabling . . . . . . . . . . . . . . 4 - 29Procedure 4 -7: Procedure for Installing RF GPS Antenna and Cabling . . . . . . . . . . . . . . 4 - 34Procedure 4 -8: Procedure to Install Ethernet Cables . . . . . . . . . . . . . . . . . . . . . . 4 - 37Procedure 4 -9: Procedure to Install Fiber Optic Cables . . . . . . . . . . . . . . . . . . . . . 4 - 38Procedure 4 -10: Procedure to Install the Customer Defined Input/Output Cables . . . . . . . . 4 - 39Procedure A -1: Procedure to Install RF Head Main Support Bracket Assembly . . . . . . . . . A - 4Procedure A -2: Procedure to Install the RF Head . . . . . . . . . . . . . . . . . . . . . . . . A - 5Procedure A -3: Procedure to Install Optional RF Filter . . . . . . . . . . . . . . . . . . . . . A - 868P09277A59 -5 xiOCT 2006 Draft
List of Proceduresxii 68P09277A59 -5Draft OCT 2006
A b o u tT h i sM a n u a lAccess Point Hardware Installation■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■This manual contains general information and procedures for shipping and handling, sitepreparation, installation, and site clean up of the Access P oint (AP) hardware.68P09277A59 -5 1OCT 2006 Draft
R evision HistoryRevision History■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The following shows the issue status of this manual since it was first released.Version InformationTable 1 Manual v ersion historyManualissueDate of issueRemarks1 5/30/06DRAFT2 7/10/06DRAFT Update 13 8/14/06DRAFT Update 24 9/27/06DRAFT Update 3510/26/06DRAFT Update 4General informationMotorola disclaims all liability whatsoever , implied or express, for any risk of damage,loss or reduction in system performance arising directly or indirectly out of thefailure of the customer , or anyone acting on the customers behalf , to abide by theinstructions, system parameters or recommendations made in this manual.2 68P09277A59 -5Draft OCT 2006
R evision HistoryPurposeMotorola cellular communications manuals are intended to instruct and assist personnel in theoperation, installation and maintenance of the Motorola cellular infrastructure equipment andancillary devices. It is recommended that all personnel engaged in such activities be properlytrained by Motorola.F ailure to comply with Motorola’ s oper ation, installation and maintenance instructionsma y , in ex ceptional circumstances, lead to serious injury or death.These manuals are not intended to replace the system and equipment training offered byMotorola, although they can be used to supplement and enhance the knowledge gained throughsuch training.Cross referencesThroughout this manual, references are made to external publications, chapter numbers andsection names. The references to external publications are shown in italics. Chapter andsection name cross references are emphasized in blue text in electronic versions. These areactive links to the references.This manual is divided into uniquely identified and numbered chapters that, in turn, are dividedinto sections. Sections are not numbered, but are individually named at the top of each page,and are listed in the table of contents.Text conventionsThe following conventions are used in the Motorola cellular infrastructure manuals to representkeyboard input text, screen output text and special key sequences.InputCharacters typed in at the keyboard are shown like this.OutputMessages, prompts, file listings, directories, utilities, and environmentalvariables that appear on the screen are shown like this.68P09277A59 -5 3OCT 2006 Draft
R evision HistorySpecial key sequencesSpecial key sequences are represented as follows:CTRL-cPress the Control and c keys at the same time.ALT-fPress the Alt and f keys at the same time.¦Press the pipe symbol key .CR or RETURNPress the Return key .4 68P09277A59 -5Draft OCT 2006
Contacting MotorolaContacting Motorola■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Motorola appreciates feedback from the users of our manuals.ErrorsT o report a documentation error , call the Customer Network Resolution Center (CNRC) andprovide the following information to enable CNRC to open an Service Request (SR):•the document type•the manual title, part number , and revision character•the page number(s) with the error•a detailed description of the error and if possible the proposed solutionQuestions and commentsSend questions and comments regarding user documentation to the email address below:cdma.documentation@motorola.com24 hour supportIf you have problems regarding the operation of your equipment, please contact the CustomerNetwork Resolution Center (CNRC) for immediate assistance. The 24 hour telephone numbersare listed at https://mynetworksupport.motorola.com. Select Customer Network ResolutionCenter contact information . F or additional CNRC contact information, contact your Motorolaaccount representative.68P09277A59 -5 5OCT 2006 Draft
Securit y AdviceSecurity Advice■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Motorola systems and equipment provide configurable security parameters to be set by theoperator based on their particular operating environment. Motorola recommends setting andusing these parameters following industry recognized security practices. Security aspectsto be considered are protecting the confidentiality , integrity , and availability of informationand assets. Assets include the ability to communicate, information about the nature of thecommunications, and information about the parties involved.In certain instances Motorola makes specific recommendations regarding security practices,however the implementation of these recommendations and final responsibility for the securityof the system lies with the operator of the system.Please contact the Customer Network Resolution Center (CNRC) for assistance. The 24 hourtelephone numbers are listed at https://mynetworksupport.motorola.com/. Select CustomerNetwork Resolution Center contact information , from the menu located to the left of theLogin box. Alternatively if you do not have access to CNRC or the internet, contact the LocalMotorola Office.6 68P09277A59 -5Draft OCT 2006
W arnings and cautionsWarnings and cautions■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The following describes how warnings and cautions are used in this manual and in all manualsof this Motorola manual set.Failure to comply with warningsObserve all warnings during all phases of operation, installation and maintenance of theequipment described in the Motorola manuals. F ailure to comply with these warnings,or with specific warnings elsewhere in the Motorola manuals, or on the equipmentitself , violates safety standards of design, manufacture and intended use of theequipment. Motorola assumes no liability for the customer ’s failure to comply withthese requirements.WarningsA definition and example follow below:Denition of WarningA warning is used to alert the reader to possible hazards that could cause loss of life, physicalinjury , or ill health. This includes hazards introduced during maintenance, for example, the useof adhesives and solvents, as well as those inherent in the equipment.Example and formatDo not look directly into ber optic cables or data in/out connectors. Laser r adiationcan come from either the data in/out connectors or unterminated ber optic cablesconnected to data in/out connectors.CautionsA definition and example follow below:Denition of CautionA caution means that there is a possibility of damage to systems, software or individual items ofequipment within a system. However , this presents no danger to personnel.68P09277A59 -5 7OCT 2006 Draft
W arnings and cautionsExample and formatDo not use test equipment that is bey ond its due calibr ation date; arr ange forcalibr ation to be carried out.NotesA definition and example follow below:Denition of NoteA note means that there is a possibility of an undesirable situation or provides additionalinformation to help the reader understand a topic or concept.Example and formatThe UDR version number is configured at installation time by Motorola personneland is not accessible by the customer .8 68P09277A59 -5Draft OCT 2006
Gener al Safet yGeneral Safety■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Ground the equipmentT o minimize shock hazard, the equipment chassis and enclosure must be connected to anelectrical ground. If the equipment is supplied with a three -conductor ac power cable, thepower cable must be either plugged into an approved three -contact electrical outlet or usedwith a three -contact to two -contact adapter . The three -contact to two -contact adapter musthave the grounding wire (green) firmly connected to an electrical ground (safety ground) atthe power outlet. The power jack and mating plug of the power cable must meet InternationalElectrotechnical Commission (IEC) safety standards.Refer toGrounding Guideline for Cellular R adio Installations – 68P81150E62.Do not operate in an explosive atmosphereDo not operate the equipment in the presence of flammable gases or fumes. Operation of anyelectrical equipment in such an environment constitutes a definite safety hazard.Keep away from live circuitsOperating personnel must:•not remove equipment covers. Only F actory Authorized Service P ersonnel or otherqualified maintenance personnel may remove equipment covers for internal subassembly ,or component replacement, or any internal adjustment.•not replace components with power cable connected. Under certain conditions, dangerousvoltages may exist even with the power cable removed.•always disconnect power and discharge circuits before touching them.Do not service or adjust aloneDo not attempt internal service or adjustment, unless another person, capable of rendering firstaid and resuscitation, is present.68P09277A59 -5 9OCT 2006 Draft
Gener al Safet yUse caution when exposing or handling the CRTBreakage of the Cathode–R ay Tube (CR T) causes a high -velocity scattering of glass fragments(implosion). T o prevent CR T implosion, avoid rough handling or jarring of the equipment. Onlyqualified maintenance personnel wearing approved safety mask and gloves should handle theCR T .Do not substitute parts or modify equipmentBecause of the danger of introducing additional hazards, do not install substitute parts orperform any unauthorized modification of equipment. Contact Motorola W arranty and Repairfor service and repair to ensure that safety features are maintained.Potentially hazardous procedure warningsW arnings, such as the example below , precede potentially hazardous procedures throughoutthis manual. Instructions contained in the warnings must be followed. Employ all other safetyprecautions necessary for the operation of the equipment in the operating environment.P otentially hazardous v oltages, capable of causing death, are present in thisequipment. Use extreme caution when handling, testing, and adjusting.10 68P09277A59 -5Draft OCT 2006
Devices sensitiv e to staticDevices sensitive to static■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Certain metal oxide semiconductor (MOS) devices embody in their design a thin layer ofinsulation that is susceptible to damage from electrostatic charge. Such a charge applied to theleads of the device could cause irreparable damage.These charges can be built up on nylon overalls, by friction, by pushing the hands into highinsulation packing material or by use of ungrounded soldering irons.MOS devices are normally despatched from the manufacturers with the leads short circuitedtogether , for example, by metal foil eyelets, wire strapping, or by inserting the leads intoconductive plastic foam. Provided the leads are short circuited it is safe to handle the device.Special handling techniquesIn the event of one of these devices having to be replaced, observe the following precautionswhen handling the replacement:•Always wear a ground strap which must be connected to the electrostatic point on theequipment.•Leave the short circuit on the leads until the last moment. It may be necessary to replacethe conductive foam by a piece of wire to enable the device to be fitted.•Do not wear outer clothing made of nylon or similar man made material. A cotton overallis preferable.•If possible work on an grounded metal surface or anti -static mat. W ipe insulated plasticwork surfaces with an anti -static cloth before starting the operation.•All metal tools should be used and when not in use they should be placed on an groundedsurface.•T ake care when removing components connected to electrostatic sensitive devices. Thesecomponents may be providing protection to the device.When mounted onto printed circuit boards (PCBs), MOS devices are normally less susceptible toelectrostatic damage. However PCBs should be handled with care, preferably by their edgesand not by their tracks and pins, they should be transferred directly from their packing to theequipment (or the other way around) and never left exposed on the workbench.68P09277A59 -5 11OCT 2006 Draft
Caring for the en vironmentCaring for the environment■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The following information is provided to enable regulatory compliance with the European Union(EU) Directive2002/96/EC W aste Electrical and Electronic Equipment (WEEE)when usingMotorola Networks equipment in EU countries.Disposal of Motorola Networks equipment in EU countriesPlease do not dispose of Motorola Networks equipment in landfill sites.In the EU , Motorola Networks in conjunction with a recycling partner will ensure that equipmentis collected and recycled according to the requirements of EU environmental law .Please contact the Customer Network Resolution Center (CNRC) for assistance. The 24 hourtelephone numbers are listed at https://mynetworksupport.motorola.com/. Select CustomerNetwork Resolution Center contact information . Alternatively if you do not have accessto CNRC or the internet, contact the Local Motorola Office.Disposal of Motorola Networks equipment in non -EU countriesIn non -EU countries, dispose of Motorola Networks equipment in accordance with nationaland regional regulations.12 68P09277A59 -5Draft OCT 2006
FCC R equirementsTable 1MPE LimitsFrequencyParameter2500 MHzMaximum Gain 16 dBiDistance 0.85 cm (33.5 in)FCC Part 15 RequirementsPart 15.19a(3) - INFORMATION TO USERThis device complies with P art 15 of the FCC Rules. Operation is subject to thefollowing two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference thatmay cause undesired operationPart 15.21 - INFORMATION TO USERChanges or modications not expressly appro v ed b y Motorola could v oid the user ’ sauthorit y to oper ate the equipment.28 P AR TNOPRELIMINARY - UNDER DEVELOPMENT MMM YYYY
FCC R equirements15.105(b) - INFORMATION TO USERThis equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to P art 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However , there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment OFF and ON , the user is encouraged to try to correct theinterference by one or more of the following measures:•Reorient or relocate the receiving antenna•Increase the separation between the equipment and receiver .•Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.•Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.P AR TNO 29MMM YYYY PRELIMINARY - UNDER DEVELOPMENT
FCC R equirementsLabel and Locationti_cdma_WiMAXLabelLocation.eps30 P AR TNOPRELIMINARY - UNDER DEVELOPMENT MMM YYYY
Third P art y Computer Softw are and T r ademarksThird Party Computer Software and Trademarks■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■Computer SoftwareThe Motorola and 3rd P arty supplied Software (SW) products described in this instructionmanual may include copyrighted Motorola and other 3rd P arty supplied computer programsstored in semiconductor memories or other media. Laws in the United States and othercountries preserve for Motorola and other 3rd P arty supplied SW certain exclusive rights forcopyrighted computer programs, including the exclusive right to copy or reproduce in anyform the copyrighted computer program. Accordingly , any copyrighted Motorola or other3rd P arty supplied SW computer programs contained in the Motorola products described inthis instruction manual may not be copied (reverse engineered) or reproduced in any mannerwithout the express written permission of Motorola or the 3rd P arty SW supplier . Furthermore,the purchase of Motorola products shall not be deemed to grant either directly or by implication,estoppel, or otherwise, any license under the copyrights, patents or patent applications ofMotorola or other 3rd P arty supplied SW , except for the normal non -exclusive, royalty freelicense to use that arises by operation of law in the sale of a product.Vendor CopyrightApache Software F oundation Copyright 2002-2003 All Rights ReservedArtesynCopyright 2002-2003 All Rights ReservedCMU *Copyright 2002-2003 All Rights ReservedFreeware T ools / Utilities * Copyright 2002-2003 All Rights ReservedP erformance T echnologies Copyright 2002-2003 All Rights ReservedT elelogic Copyright 2002-2003 All Rights ReservedQNX *Copyright 2002-2003 All Rights Reserved*= FreewareTrademarksJava™ T echnology and/or J2ME™ : Java and all other Java -based marks are trademarks orregistered trademarks of Sun Microsystems, Inc. in the U .S . and other countries.UNIX® : UNIX is a registered trademark of The Open Group in the United States and othercountries.68P09277A59 -5 13OCT 2006 Draft
Motorola manual setMotorola manual set■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The Motorola manual sets provide the information needed to install, operate, and maintainthe Motorola equipment.Ordering manuals and CD -ROMsW ith internet access available, to view , download, or order manuals (original or revised), visitthe Motorola Lifecycles Customer web page at https://mynetworksupport.motorola.com/, orcontact your Motorola account representative.W ithout internet access available, order hard copy manuals or CD -ROMs with your MotorolaLocal Office or Representative.If Motorola changes the content of a manual after the original printing date, Motorola publishesa new version with the same part number but a different revision character .Manual banner denitionsA banner (oversized text on the bottom of the page, for example, PRELIMINARY ) indicates thatsome information contained in the manual is not yet approved for general customer use.14 68P09277A59 -5Draft OCT 2006
C h a p t e r1Introduction■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■68P09277A59 -5 1 -1OCT 2006 Draft
Introduction Chapter 1: IntroductionIntroduction■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■OverviewThis document provides information pertaining to the hardware and cabling installation for theoutdoor version of the Motorola Access P oint (AP) Hardware.Manual OrderThe manual order outlines the content make up starting with Chapter 1 and continuing throughChapter X. A fter hardware installation has been completed, run the A TP for the system byfollowing the procedures defined in Chapter Y of this manual.Chapter 1 Overview - This is a brief outline of the manual. It also provides a list of additionaldocuments and tools necessary to complete the procedures.Chapter 2 Site Preparation - This chapter contains the information for site verification andshipping and handling of the hardware.Chapter 3 Cable Descriptions — This chapter contains general information on the cablingavailable for the B CU and RF Head.Chapter 4 Access P oint Hardware Installation — This chapter contains general informationand procedures for installing the Base Control Unit (B CU) and RF Head.Chapter 5 Optional Equipment — This chapter contains general information and proceduresfor installing optional equipment.Chapter 6 Access P oint Hardware Operational check — This chapter contains generalinformation and operational checkout procedures for pre and post installation of the B CUand RF Head.Chapter 7 What’s Next - This chapter contains general information and procedures for siteclean up and installation checklist.1 -2 68P09277A59 -5Draft OCT 2006
Access P oint Hardw are Installation IntroductionProduct DescriptionThe Access P oint (AP) hardware is made up of two component assemblies: the B CU and theRF Head. The B CU contains the signal processing and interface hardware, and the RF Headcontains the TX and RX components and B CU interface hardware.Recommended DocumentsThe following documents may be required to assist in the installation of the AP Hardware.•Grounding Guidelines for Cellular R adio Installations (Motorola part number68P81150E62) orAppendix C of Standards and Guidelines for Communication Sites•Standards and Guidelines for Communication SitesHard copy (Motorola P art Number 6881089E50)CD -ROM (Motorola P art Number 9882904Y01)•Site Document (generated by Motorola Systems Engineering), which includes:site specific documentationchannel allocationcontact list (customer)ancillary/expendable equipment listsite wiring listscontact list (Motorola support)job box inventory•Demarcation Document (Scope of W ork agreement)•Installation manuals for non -Motorola equipment (for reference purposes).Abbreviations and AcronymsT able 1 -1 lists the uncommon abbreviations and acronyms that appear within the manual.68P09277A59 -5 1 -3Draft OCT 2006
Introduction Chapter 1: IntroductionTable 1 -1 Abbreviations and Acron ymsT ermDenitionAPAccess P ointB CUBase Control UnitCB CCircuit Breaker CardDACDirect Air CoolingDAPDiversity Access P ointPSUP ower Supply UnitRFCU RF Carrier UnitTRXTransmit/Receive RF Module1 -4 68P09277A59 -5Draft OCT 2006
Access P oint Hardw are Installation T ools and MaterialsTools and Materials■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■IntroductionMany of the tools and materials depend on the style of the wall or pole on which the mountingbracket is being installed. The tools and materials required to install the BTS hardware arespecified for each mounting style. Due to the variability of mounting styles, additional tools andmaterials may be required to meet specific site needs.Tools and MaterialsThe tools and materials listed in T able 1 -2 are recommended to properly and safely perform thevarious installation procedures. Not all the tools will be used in all the procedures.Table 1 -2 T ools and MaterialsHand T ool Materials PurposeAdjustable T orque ratchetand metric/standard socketsetCustomer Supplied F or general torquing of bolts and nuts.Cordless P ower Drill, 1/4-inor 3/8-in driveAppropriate wood andmasonry drill bits (Standardset may be adequate)Customer SuppliedDrill holes in wood and light concreteBucklestrap Cutting T ool (Motorola P/N 6604809N01) F or the pole mounting bracketsT ape MeasureCustomer Supplied General purpose measurementTin SnipsCustomer Supplied General purpose metal cuttingSafety Glasses Customer Supplied Eye SafetyKnife or Box Cutter Customer Supplied General purpose cutting13/16 Breakaway T orqueW rench 38-in. lbCustomer SuppliedN ConnectorsBlock and T ackle Customer Supplied R aising the RF HeadNo . 2 Blade Screw Driver Customer Supplied General PurposeElectrical T ape Customer Supplied General PurposeAdjustable Crescent W rench Customer Supplied General PurposeT30 T orx Screw DriverCustomer Supplied General PurposeTie- W rapsCustomer Supplied General Purpose, varying lengths.Crimp T ool Customer Supplied Ground wires68P09277A59 -5 1 -5Draft OCT 2006
T ools and Materials Chapter 1: IntroductionBase Control Unit Hardware IdenticationFigure 1 -1 shows the B CU in an outdoor configuration.Figure 1 -1 BCUti-cdma-04165.epsRF Head Hardware IdenticationFigure 1 -2 shows the DAP RF Head hardware.1 -6 68P09277A59 -5Draft OCT 2006
Access P oint Hardw are Installation T ools and MaterialsFigure 1 -2 RF Headti-cdma-04166.eps68P09277A59 -5 1 -7Draft OCT 2006
Access P oint Equipment Identication Chapter 1: IntroductionAccess Point Equipment Identication■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■IntroductionThe Base Control Unit (B CU) consists of one shelf of cards and modules within a metalenclosure. The B CU is powered by AC or DC voltage.BCU Hardware IdenticationFigure 1 -3 displays the contents of the Base Control Unit (B CU . Except for the Mounting BracketAssembly all the items shown are already installed in the B CU . The number of cards installedin the B CU card cage depends on the configuration that was ordered. Maximum number ofcards in the B CU card cage is listed below:•1 — Alarms Card•1 — Circuit Breaker Card•4 — Modem Cards•2 — Controller Cards•3 — P ower Supply UnitsThe I/O P anel is always installed and is located in the Customer Interface compartment.Heater is usually necessary if unit is used in a cold climate.1 -8 68P09277A59 -5Draft OCT 2006

Navigation menu