Nordic Track 236650 Owner S Manual 285430

Nordic-Track-Ntel75060-Owner-S-Manual nordic-track-ntel75060-owner-s-manual

AUDIOSTRIDER NTEL7506.0 NTEL7506.0-247355

2014-07-06

: Nordic-Track Nordic-Track-236650-Owner-S-Manual nordic-track-236650-owner-s-manual nordic-track pdf

Open the PDF directly: View PDF .
Page Count: 28

Download
Open PDF In Browser	View PDF

USERʼS MANUAL

Model No. NTEL7506.0
Serial No.

Serial
Number
Decal

QUESTIONS?

As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.

1-888-825-2588

CALL TOLL-FREE:

Mon.–Fri., 6 a.m.–6 p.m. MST
Sat. 8 a.m.–5 p.m. MST

ON THE WEB:
www.nordictrackservice.com

CAUTION

Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.

Visit our website at

www.nordictrack.com

new products, prizes,
fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

NordicTrack is a registered trademark of ICON IP, Inc.

IMPORTANT PRECAUTIONS
WARNING:

To reduce the risk of serious injury, read the following important precautions before using the elliptical exerciser.

8. Wear appropriate exercise clothes while
using the elliptical exerciser. Always wear
athletic shoes for foot protection while exercising.

1. Read all instructions in this manual and all
warnings on the elliptical exerciser before
using the elliptical exerciser. Use the elliptical exercise only as described in this
manual.

9. Hold the handgrip pulse sensor or the upper
body arms when mounting, dismounting, or
using the elliptical exerciser.

2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.

10. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determining heart rate trends in general.

3. The elliptical exerciser is intended for
home use only. Do not use the elliptical
exerciser in a commercial, rental, or institutional setting.

11. Keep your back straight while using the elliptical exerciser; do not arch your back.

4. Keep the elliptical exerciser indoors, away
from moisture and dust. Place the elliptical
exerciser on a level surface, with a mat
beneath it to protect the floor or carpet.
Make sure that there is enough clearance
around the elliptical exerciser to mount, dismount, and use it.

12. If you feel pain or dizziness while exercising,
stop immediately and cool down.

13. When you stop exercising, allow the pedals
to slowly come to a stop.

5. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.

14. The warning decals shown on page 4 have
been placed on the elliptical exerciser in the
locations shown. If a decal is missing or
illegible, call the toll-free telephone number
on the front cover of this manual and order
a free replacement decal. Apply the decal in
the location shown.

6. Keep children under 12 and pets away from
the elliptical exerciser at all times.

7. The elliptical exerciser should not be used
by persons weighing more than 275 pounds.

WARNING:

Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Thank you for purchasing the revolutionary
NordicTrack® AUDIOSTRIDER 600 elliptical exerciser.
The AUDIOSTRIDER 600 elliptical exerciser provides
a wide array of features designed to make your workouts at home more effective and enjoyable—and
when youʼre not exercising, the unique elliptical exerciser can be folded out of the way.

tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the
product model number and serial number before contacting us. The model number is NTEL7506.0. The
serial number can be found on a decal attached to the
elliptical exerciser (see the front cover of this manual
for the location of the decal).

For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Fan

Upper Body Arm

Console

Pulse Sensor
Water Bottle Holder*

FRONT

Wheel
Pedal

Pedal Disc

Latch Button

RIGHT SIDE

Handle
REAR

*No water bottle is included

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included hex keys and your own phillips screwdriver
wrench
, and rubber mallet
.

, adjustable

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled.

Wave Washer
Large Wave
(101)–2
Washer (102)–4

M10 Split
Washer (99)–2

M8 x 19mm Button
Screw (85)–6

M8 Split
Washer (97)–16

M10 Nylon
Locknut (82)–2

M8 Washer
(95)–4

M8 x 23mm x
1mm Washer
(31)–4

M4 x 16mm
Screw (78)–6

M8 x 23mm Button
Screw (86)–4

M4 x 16mm
Round Head
Screw (80)–21

M8 x 23mm x
2mm Washer
(96)–8

M8 x 14mm Button
Screw (84)–6

M10 x 78mm Carriage Bolt (92)–2

M8 x 45mm Button
Screw (90)–6

M10 x 80mm Button Screw (93)–2

1. See HOW TO FOLD AND UNFOLD THE
ELLIPTICAL EXERCISER on page 11 and
unfold the elliptical exerciser.

While another person lifts the front of the
Frame (1), attach the Front Stabilizer (4) to the
Frame with two M10 x 78mm Carriage
Bolts (92) and two M10 Nylon Locknuts (82).

82
82

2. Attach the Left and Right Frame Covers (36, 37)
around the Frame (1) with four M4 x 16mm
Round Head Screws (80).

80
1

80
3. With the help of another person, carefully tip
the elliptical exerciser onto its side. Attach the
Center Foot (40) to the Frame (1) with two
M4 x 16mm Screws (78). Then, return the elliptical exerciser to the upright position.

3
1

Orient the Rear Stabilizer (3) as shown. While
another person lifts the Folding Frame (2),
attach the Rear Stabilizer to the Folding Frame
with two M10 x 80mm Button Screws (93) and
two M10 Split Washers (99).

99
3

4. While another person holds the Upright (10)
near the Frame (1), connect the Upper Wire
Harness (65) to the Lower Wire Harness (64).

Then, insert the Upright (10) into the Frame (1).
Attach the Upright with four M8 x 19mm Button
Screws (85) and four M8 Split Washers (97). Do
not tighten the Button Screws yet.

Avoid pinching the Wire Harnesses (64, 65)
during this step.

Avoid pinching the
Wire Harnesses (64, 65)
during this step

64
97

97
1

5. Orient the Left and Right Upright Covers (19, 20)
as shown. Then, attach the Upright Covers
around the Upright (10) with five M4 x 16mm
Round Head Screws (80).

5
80

80
80

6. Apply a generous amount of the included grease
to the Upper Body Axle (71). Insert the Upper
Body Axle into the Upright (10). Be careful not
to damage the Upper Wire Harness (65).

Apply a small amount of grease to a Wave
Washer (101). Slide the Wave Washer onto the
left end of the Upper Body Axle (71).

10
Grease

Identify the Left Upper Body Leg (24), which is
marked with a sticker, and orient it as shown.
Slide the Left Upper Body Leg onto the left side
of the Upper Body Axle (71).

Attach the Left Upper Body Leg (24) to the Upper
Body Axle (71) with an M8 x 19mm Button
Screw (85) and an M8 x 23mm x 2mm Washer
(96).

101
24

Repeat this step for the Right Upper Body
Leg (72).

Grease

101

96 85

7. Attach the Left Upper Body Arm (22) to the Left
Upper Body Leg (24) with three M8 x 14mm
Button Screws (84) and three M8 Split
Washers (97).

Attach the Right Upper Body Arm (23) in the
same way.

84
8. Hold the Left Rear Upper Body Cover (26) and
the Left Front Upper Body Cover (27) around
the Left Upper Body Leg (24). Attach the Upper
Body Covers with five M4 x 16mm Round Head
Screws (80).

Attach the Right Rear Upper Body Cover (28)
and the Right Front Upper Body Cover (29)
in the same way.

80
27

9. The Console (11) can use four D batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic components. Remove the battery cover, insert the batteries into the battery compartment, and reattach the battery cover. Make sure to orient the
batteries as shown by the diagram inside the
battery compartment.

28
26

Batteries

To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter. Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.

Battery
Cover

10. While another person holds the Console (11)
near the Upright (10), connect the console wire
harness to the Upper Wire Harness (65).

10
Console Wire
Harness

Attach the Console (11) to the Upright (10) with
four M4 x 16mm Screws (78). Avoid pinching
the wire harnesses during this step.

11. Orient a Link Arm (30) as shown. Attach the
Left Pedal (34) to the Link Arm with three
M8 x 45mm Button Screws (90), three M8 Split
Washers (97), and three M8 x 23mm x 2mm
Washers (96).

Attach a Pedal Arm Cover (39) to the Link
Arm (30) with an M4 x 16mm Round Head
Screw (80).

97
90

Avoid pinching the
wire harnesses
during this step

Repeat this step for the Right Pedal (not
shown) and the other Link Arm (not shown).

96
97

39
30

12. Apply a generous amount of grease to the axle
on the Left Upper Body Leg (24) and to the axle
on the left Crank Arm (55). Then, apply grease
to two Large Wave Washers (102).

Grease

Slide an Upper Body Leg Spacer (9) and a
Large Wave Washer (102) onto the Left Upper
Body Leg (24). Make sure that the flat side of
the Upper Body Leg Spacer is facing outward. Then, slide the other Large Wave Washer
onto the left Crank Arm (55).

86 95

Slide the left Pedal Arm (32) onto the Left Upper
Body Leg (24) while sliding the left Link Arm
(30) onto the axle on the left Crank Arm (55).

102

Attach the Pedal Arm (32) to the Left Upper
Body Leg (24) with an M8 x 23mm Button
Screw (86), an M8 Washer (95), an Axle Cover
(66), and an M8 x 23mm x 1mm Washer (31).

Then, attach the Link Arm (30) to the Crank Arm
(55) with an M8 x 23mm Button Screw (86), an
M8 Washer (95), a Large Axle Cover (52), and
an M8 x 23mm x 1mm Washer (31).

Repeat this step for the right Pedal
Arm (32) and the right Link Arm (30).

See step 4. Tighten the M8 x 19mm Button
Screws (85).

31
52

102

Grease

13. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be
left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the
elliptical exerciser.

HOW TO USE THE ELLIPTICAL EXERCISER
HOW TO FOLD AND UNFOLD THE ELLIPTICAL
EXERCISER

When the elliptical exerciser is not in use, the frame
can be folded out of the way. To fold the elliptical exerciser, lift the handle on the rear of the elliptical exerciser
until the elliptical exerciser locks into the vertical position.

To move the elliptical exerciser, first fold it as
described at the left. Next, stand in front of the elliptical exerciser and place one foot against the center of
the front stabilizer. Pull the transport handle backward
until the elliptical exerciser will roll on the front wheels.
Carefully move the elliptical exerciser to the desired
position, and then lower it.
Transport
Handle

Handle
To unfold the elliptical exerciser, first hold the handle,
press the latch button, and then lower the frame to the
floor.

Place
your foot
here

Handle

Latch
Button

HOW TO MOVE THE ELLIPTICAL EXERCISER

HOW TO EXERCISE ON THE ELLIPTICAL
EXERCISER

To mount the elliptical exerciser, hold the upper body
arms and step onto the pedal that is in the lowest position. Next, step onto the other pedal. Push the pedals
until they begin to move with a continuous motion.

Upper Body Arms

Note: The crank arms can turn in either direction.
It is recommended that you turn the crank arms in
the direction shown by the arrow at the right; however, for variety you can turn the crank arms in the
opposite direction.

Pedals

To dismount the elliptical exerciser, wait until the pedals come to a complete stop. Note: The elliptical
exerciser does not have a free wheel; the pedals
will continue to move until the flywheel stops.
When the pedals are stationary, step off the higher
pedal first. Then, step off the lower pedal.

Crank Arm

CONSOLE DIAGRAM

FEATURES OF THE CONSOLE

The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable. When you select the manual mode of the
console, you can change the resistance of the pedals
with the touch of a button. As you exercise, the console will provide continuous exercise feedback. You
can even measure your heart rate using the handgrip
pulse sensor.

The console also offers four preset programs. Each
program automatically changes the resistance of the
pedals and prompts you to increase or decrease your
pedaling speed as it guides you through an effective
workout.

In addition, the console features two heart rate programs that change the resistance of the pedals to
keep your heart rate near target heart rate settings
while you exercise.

The console also features the new iFIT Interactive
Workout System. The iFIT Interactive Workout System
is compatible with iFIT Cards containing workout programs designed to help you achieve specific fitness
goals. For example, lose unwanted pounds with the 8week Weight Loss program. iFIT programs control the
resistance of the pedals while the voice of a personal
trainer coaches you and motivates you through your
workouts. iFIT Cards are available separately. To purchase iFIT Cards, go to www.iFIT.com or call the
toll-free telephone number on the front cover of
this manual. iFIT Cards are also available at select
stores.

You can even connect your MP3 player or CD player
to the consoleʼs stereo sound system and listen to
your favorite music or audio books while you exercise.

To use the manual mode of the console, follow the
steps beginning on page 14. To use a preset
program, see page 16. To use a heart rate program,
see page 17. To use an iFIT program, see page 18.
To use the stereo sound system, see page 18.

HOW TO USE THE MANUAL MODE

Note: If there is a sheet of clear plastic on the face of
the console, remove the plastic.

1
2

Press any button on the console or begin
pedaling to turn on the console.

When you turn on the console, the display and
the program target pacer will light. A tone will
then sound and the console will be ready for use.
Select the manual mode.

Follow your progress with the displays.

The upper right section of the display can
show the elapsed
time, the distance
(total revolutions) you
have pedaled, the
approximate number of calories you have burned,
and the approximate number of grams of carbs
you have burned. The display will change modes
every few seconds.

The lower right section of the display can
show your pedaling
pace (in revolutions
per minute) and the
resistance level of the
pedals. The display will change modes every few
seconds. The display will also show your heart
rate when you use the handgrip pulse sensor (see
step 5 on page 15).

When you turn on the console, the manual mode
will be selected. If you have selected a program,
reselect the manual mode by pressing any of the
Programs buttons repeatedly until a track appears
in the left side of the display.

The left section of the
display will show a
track representing 640
revolutions. As you
exercise, indicators
will appear in succession around the track
until the entire track
appears. The track will then disappear and the
indicators will again begin to appear in succession

Begin pedaling and change the resistance of
the pedals as desired.
As you pedal,
change the resistance of the pedals
by pressing the
OneTouch Resistance buttons. There
are ten resistance levels. Note: After you press
the buttons, it will take a moment for the pedals
to reach the selected resistance level.

To change the display mode, press the Display
button repeatedly until the desired exercise information appears in the upper or lower right display.
After several seconds, the display will change
modes automatically as before.

To view the total distance pedaled since the elliptical exerciser was purchased, press the Odometer
button. The information will appear in the display
for a few seconds. To view the trip distance, press
the Odometer button a second time. To reset the
trip distance, hold down the Odometer button for a
few seconds. Note: The number on the right side
of the display multiplied by the number on the left
side equals the total distance or the trip distance.

Measure your heart rate if desired.

Turn on the fan if desired.

If there are
sheets of clear
Contacts
plastic on the
metal contacts
on the handgrip
pulse sensor,
remove the plastic. In addition,
make sure that
your hands are
clean. To measure your heart rate, hold the handgrip pulse sensor with your palms resting against the metal contacts. Avoid moving your hands or gripping the
contacts tightly.

To turn on the fan at high speed, press the Fan
button. To turn on the fan at low speed, press the
Fan button a second time. To select the auto
mode, press the Fan button a third time; while the
auto mode is selected, the speed of the fan will
automatically increase or decrease as you
increase or decrease your pedaling speed.

Pivot the thumb
tab on the right
side of the fan to
adjust the fan
angle.

Thumb
Tab

To turn off the fan, press the Fan button again.
Note: If the pedals do not move for about thirty
seconds, the fan will automatically turn off to conserve the batteries.

When your pulse is detected, a heart-shaped
symbol will flash in the display each time your
heart beats and then your heart rate will be
shown. For the most accurate heart rate reading,
hold the contacts for at least 15 seconds.

When you are finished exercising, the console
will turn off automatically.

If your heart rate is not shown, make sure that
your hands are positioned as described. Be careful not to move your hands excessively or to
squeeze the metal contacts tightly. For optimal
performance, clean the metal contacts using a
soft cloth; never use alcohol, abrasives, or
chemicals to clean the contacts.

If the pedals do not move for several seconds, a
series of tones will sound and the console will
pause.

If the pedals do not move for about five minutes,
the console will turn off and the displays will be
reset.

During the program, the program target pacer will
prompt you to keep your pedaling pace near the
target pace setting for the current segment. When
a left indicator lights, increase your pace; when a
right indicator lights, decrease your pace. When
the center indicator lights, maintain your current
pace. Important: The program target pacer is
intended only to provide a goal. Make sure to
pedal at a pace that is comfortable for you.

HOW TO USE A PRESET PROGRAM

Press any button on the console or begin
pedaling to turn on the console.

Select a preset program.

See step 1 on page 14.

To select one of the four preset programs, press
the Weight Loss, the Aerobic 1, the Aerobic 2, or
the Performance button on the left side of the
console.

When you select a preset program, the name of
the program and the maximum resistance level
will appear in the display for a few seconds. A
profile of the resistance levels of the program will
also scroll across the left side of the display.

If the resistance level for the current segment is
too high or too low, you can manually override
the resistance level by pressing the OneTouch
Resistance buttons. However, when the current
segment ends, the resistance of the pedals will
automatically adjust to the resistance level for the
next segment.

Begin pedaling to start the program.

Each program is divided into 30 one-minute segments. One resistance level and one target pace
setting is programmed for each segment. Note:
The same resistance level and/or target pace setting may be programmed for consecutive segments.

5
6

During the program, the program profile will show
your progress (see the drawing above). The
flashing segment of the profile represents the current segment of the program. The height of the
flashing segment indicates the resistance level
for the current segment. At the end of each segment of the program, a series of tones will sound
and the next segment of the profile will begin to
flash. If a different resistance level is programmed for the next segment, the resistance
level will appear in the display for a few seconds
to alert you. The resistance of the pedals will then
change.

If you stop pedaling for several seconds, a series
of tones will sound and the program will pause. To
restart the program, simply resume pedaling. The
program will continue until the last segment of the
profile ends.
Follow your progress with the displays.
See step 4 on page 14.

Measure your heart rate if desired.

See step 5 on page 15.

Turn on the fan if desired.

See step 6 on page 15.

When you are finished exercising, the console
will turn off automatically.

See step 7 on page 15.

Begin pedaling to start the program.

HOW TO USE A HEART RATE PROGRAM

Heart rate program 1 is divided into 40 oneminute segments. Note: For a shorter workout,
stop exercising or select a different program
before the program ends.

Press any button on the console or begin
pedaling to turn on the console.
See step 1 on page 14.

Heart rate program 2 is divided into 30 oneminute segments. One target heart rate setting is
programmed for each segment. Note: The same
target heart rate setting may be programmed for
consecutive segments.

Select a heart rate program.

To select one of the heart rate programs, press
the Heart Rate 1 or the Heart Rate 2 button on
the left side of the console.

During the program, the program profile in the
display will show your progress. The flashing segment of the profile represents the current segment of the program. The height of the flashing
segment indicates the target heart rate setting for
the current segment. At the end of each segment
of the program, a series of tones will sound and
the next segment of the profile will begin to flash.

Enter a target heart rate setting.

A few seconds after
you select a heart
rate program, the target heart rate setting
for the program will
flash in the lower right
display.

During heart rate program 1, the same target
heart rate setting will be programmed for all segments of the program. If you have selected heart
rate program 1, press the increase and decrease
buttons above the Heart Rate Program buttons to
enter the desired target heart rate setting (see
EXERCISE INTENSITY on page 20).

During both programs, the console will regularly
compare your heart rate to the target heart rate
setting for the current segment of the program. If
your heart rate is too far below or above the target heart rate setting, the resistance of the pedals
will automatically increase or decrease to bring
your heart rate closer to the target heart rate setting. Each time the resistance changes, the resistance level will appear in the display for a few
seconds to alert you.

During heart rate program 2, different target
heart rate settings will be programmed for different segments of the program. If you have selected heart rate program 2, press the increase and
decrease buttons above the Heart Rate Program
buttons to enter the desired maximum target
heart rate setting for the program (see EXERCISE INTENSITY on page 20).
Hold the handgrip pulse sensor.

It is not necessary to hold the handgrip pulse
sensor continuously during heart rate programs;
however, you should hold the handgrip pulse sensor frequently for the programs to operate properly. Each time you hold the handgrip pulse sensor, keep your hands on the metal contacts
for at least 30 seconds.

While you exercise, the program target pacer will
prompt you to maintain a constant pedaling
speed. When a left indicator lights, increase your
pace; when a right indicator lights, decrease your
pace. When the center indicator lights, maintain
your current pace. Important: The program target pacer is intended only to provide a goal.
Make sure to pedal at a pace that is comfortable for you.

HOW TO USE AN IFIT PROGRAM

1
2

If the resistance level for the current segment is
too high or too low, you can manually override
the resistance level by pressing the OneTouch
Resistance buttons. However, when the console
compares your heart rate to the target heart rate
setting, the resistance of the pedals may automatically increase or decrease to bring your heart
rate closer to the target heart rate setting.

6
7
8

Press any button on the console or begin
pedaling to turn on the console.

See step 1 on page 14.

Insert an iFIT Card and select a program.

To use an iFIT program, insert an iFIT Card into
the iFIT slot; make sure that the iFIT Card is oriented so the metal contacts are face down and
are facing the slot. When the iFIT Card is properly inserted, the indicator next to the slot will light
and the words IFIT 1 will appear in the display.

iFIT Slot

iFIT Card

Next, select the desired program on the iFIT Card
by pressing the increase and decrease buttons
next to the iFIT slot.

Follow your progress with the displays.
See step 4 on page 14.

Turn on the fan if desired.

See step 6 on page 15.

When you are finished exercising, the console
will turn off automatically.

See step 7 on page 15.

A moment after you select a program, the voice
of a personal trainer will begin guiding you
through your workout. iFIT programs work in the
same way as preset programs. To use the program, see steps 3 to 7 on page 16.

When you are finished exercising, remove the
iFit Card.

Remove the iFit Card when you are finished exercising. Store the iFit Card in a secure place.

HOW TO USE THE STEREO SOUND SYSTEM

To play music or audio books through the consoleʼs
stereo sound system while you exercise, locate the
jack under the ledge on the console. Plug the included
audio cable into the jack on the console and into a
jack on your MP3 player or CD player; make sure
that the audio cable is fully plugged in.

Next, press the play button on your MP3 player or CD
player. Adjust the volume of the speakers using the
volume control on your MP3 player or CD player.

MAINTENANCE AND TROUBLESHOOTING

HOW TO ADJUST THE BELT

Inspect and tighten all parts of the elliptical exerciser
regularly. Replace any worn parts immediately.

If the pedals slip while you are pedaling, even while
the resistance is adjusted to the highest setting, the
belt may need to be adjusted. To adjust the belt, first
see assembly step 12 on page 10 and remove the left
pedal arm and the left link arm.

To clean the elliptical exerciser, use a damp cloth and
a small amount of mild soap. Important: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.

Then, remove the
four screws (not
shown) from the
center of the left
Disc (12). Next,
carefully pry off
the left Disc
Cover (13) using
13
a flat screwdriver.
12
Gently rotate the
Disc Cover and
the Disc away from the elliptical exerciser.

BATTERY REPLACEMENT

If the console displays become dim, the batteries
should be replaced; most console problems are the
result of low batteries. See assembly step 9 on page
8 for replacement instructions.

HANDGRIP PULSE SENSOR TROUBLESHOOTING

If the handgrip pulse sensor does not function properly, see step 5 on page 15.
HOW TO ELIMINATE RUBBING OF THE DISCS

Loosen, but do
not remove, the
three indicated
screws (A). Insert
74
the shaft of a
screwdriver
downward
47
between the
48
A
Idler (47) and the
Idler Pulley (48).
Pull the top of the
screwdriver
toward the front
of the elliptical exerciser until the Belt (74) is tight.
Then, tighten the three screws.

If the Discs (12) rub against the Side Shields (14, 15)
during use, make sure that the Center Foot (40) is
installed in the Frame (1). If the Center Foot is
installed, loosen the two indicated Bolt Sets (88) and
the two M4 x 16mm Screws (78) in each side of the
elliptical exerciser.
88
14, 15
12

Reattach the left disc with the four screws and then
reattach the left disc cover. Next, see assembly step
12 on page 10 and reattach the left pedal arm and the
left link arm.

Adjust the position of the Side Shields (14, 15) until
the Discs (12) no longer rub against them, and then
tighten the Bolt Sets (88) and the M4 x 16mm Screws
(78).

CONDITIONING GUIDELINES
WARNING:

Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35
or persons with pre-existing health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determining heart rate trends in general.

During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for energy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest number in your training zone as you exercise.

For maximum fat burning, adjust the intensity of your
exercise until your heart rate is near the middle number in your training zone as you exercise.

Aerobic Exercise

If your goal is to strengthen your cardiovascular system, your exercise must be “aerobic.” Aerobic exercise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone as you exercise.

The following guidelines will help you to plan your
exercise program. Remember that proper nutrition
and adequate rest are essential for successful results.
EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.

WORKOUT GUIDELINES

Each workout should include the following three parts:

A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in preparation for exercise.

Training zone exercise, consisting of 20 to 30 minutes of exercising with your heart rate in your training
zone. Note: During the first few weeks of your exercise program, do not keep your heart rate in your
training zone for longer than 20 minutes.

A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.

To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers above
your age. The three numbers are your “training zone.”
The lower two numbers are recommended heart rates
for fat burning; the highest number is the recommended heart rate for aerobic exercise.

EXERCISE FREQUENCY

To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each week
if desired. The key to success is to make exercise a
regular and enjoyable part of your everyday life.

Fat Burning

To burn fat effectively, you must exercise at a relatively low intensity level for a sustained period of time.

SUGGESTED STRETCHES

The correct form for several basic stretches is shown at the right.
Move slowly as you stretch—never bounce.

1. Toe Touch Stretch

Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times. Stretches: Hamstrings, back of knees
and back.

2. Hamstring Stretch

Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles Stretch

With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for each leg. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons and ankles.

3
4

4. Quadriceps Stretch

With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for each leg. Stretches: Quadriceps and hip muscles.

5. Inner Thigh Stretch

Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps and
hip muscles.

NOTES

PART LIST—Model No. NTEL7506.0
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

1
1
1
1
1
1
4
2
2
1
1
2
2
1
1
4
2
2
1
1
2
1
1
1
1
1
1
1
1
2
6
2
4
1
1
1
1
1
2
1
1
4
2
1
1
1
1
1
1
1

Description

Frame
Folding Frame
Rear Stabilizer
Front Stabilizer
Left Pedal Bracket
Right Pedal Bracket
Upper Bushing Assembly
Upper Body Arm Endcap
Upper Body Leg Spacer
Upright
Console
Disc
Disc Cover
Left Side Shield
Right Side Shield
Stabilizer Endcap
Wheel
Link Axle
Left Upright Cover
Right Upright Cover
Pivot Bushing
Left Upper Body Arm
Right Upper Body Arm
Left Upper Body Leg
Latch Axle
Left Rear Upper Body Cover
Left Front Upper Body Cover
Right Rear Upper Body Cover
Right Front Upper Body Cover
Link Arm
M8 x 23mm x 1mm Washer
Pedal Arm
M6 Washer
Left Pedal
Right Pedal
Left Frame Cover
Right Frame Cover
Latch Spring
Pedal Arm Cover
Center Foot
Latch Button
Link Bearing
Link Arm Pad
Eddy Mechanism
Eddy Crank Assembly
Pillow Block
Idler
Idler Pulley
Eddy Motor
Reed Switch/Wire

Key No. Qty.
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100

1
2
4
4
2
1
1
2
2
1
1
2
2
1
1
2
4
2
1
1
1
1
2
1
2
1
2
10
4
21
8
4
8
6
8
4
12
5
4
6
2
2
2
4
4
8
16
2
2
2

Description

R0909A

Clamp
Large Axle Cover
Pivot Arm Bushing
Link Snap Ring
Crank Arm
Crank Arm Spacer
Large Pulley
Crank Flange
Crank Bearing Assembly
Crank Spacer
Crank
Crank Snap Ring
Flange Screw
Lower Wire Harness
Upper Wire Harness
Axle Cover
Bushing Assembly
Brass Bushing
Latch Bracket
Pivot Axle
Upper Body Axle
Right Upper Body Leg
Upper Body Leg Endcap
Belt
Foam
Frame Cap
Transfer Handle Endcap
M4 x 16mm Screw
M4 x 16mm Flat Head Screw
M4 x 16mm Round Head Screw
M4 x 16mm Blunt Screw
M10 Nylon Locknut
M6 x 10mm Button Screw
M8 x 14mm Button Screw
M8 x 19mm Button Screw
M8 x 23mm Button Screw
M8 x 25mm Button Screw
M8 x 25mm Bolt Set
M8 x 35mm Button Screw
M8 x 45mm Button Screw
M10 x 60mm Button Bolt
M10 x 78mm Carriage Bolt
M10 x 80mm Button Screw
M6 Nylon Locknut
M8 Washer
M8 x 23mm x 2mm Washer
M8 Split Washer
M10 Washer
M10 Split Washer
M10 x 25mm Button Screw

Key No. Qty.
101
102
103

2
4
8

Description

Wave Washer
Large Wave Washer
M8 Nylon Locknut

Key No. Qty.
#
#
#

1
2
1

Description

Userʼs Manual
Hex Key
Grease

Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.

83
96

26 80

96 7

101

102
80

91
11

73
39

101

1
85

102

67
31

9 67

97
66

100
25 98
38

96
90

31 85

84 95

98
100 40

96
80
97

6
83
80 39

EXPLODED DRAWING A—Model No. NTEL7506.0
R0909A

102

47
46

103

2
16

62 59

16
99

103

102

15
78

EXPLODED DRAWING B—Model No. NTEL7506.0
R0909A

HOW TO ORDER REPLACEMENT PARTS

To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to
provide the following information when contacting us:
• the MODEL NUMBER of the product (NTEL7506.0)

• the NAME of the product (NordicTrack AUDIOSTRIDER 600 elliptical exerciser)

• the SERIAL NUMBER of the product (see the front cover of this manual)

• the KEY NUMBER and DESCRIPTION of the part(s) (see pages 24 to 27)

LIMITED WARRANTY

WHAT IS COVERED—The entire NordicTrack elliptical exerciser (“Product”) is warranted to be free of all defects in material and
workmanship.
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.

HOW LONG IT IS COVERED—ICON Health & Fitness, Inc. (“ICON”) warrants the product for one year after the date of purchase.
Labor is covered for one year. There is a lifetime warranty on the frame.

WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or component, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized service provider, or, at our
option, we will replace the Product.

WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation, alterations, modifications without our written authorization or by failure on your part to use, operate, and maintain
as set out in your Userʼs Manual (“Manual”).

WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the Product as specified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of the defect; as instructed, return any defected part for replacement or, if necessary, the entire product, for repair.

USERʼS MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to do the
periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.

HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-888-825-2588 and tell them your name
and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary, arrange for service
where your Product is located or advise you how to ship the Product for service. Before shipping, always obtain a Return
Authorization Number (RA No.) from our Customer Service Department; securely pack your Product (save the original shipping carton if possible); put the RA No. on the outside of the carton and insure the product. Include a letter explaining the product or problem and a copy of your proof of purchase if you believe the service is covered by warranty.

ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness
for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how
long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty. This warranty gives you specific legal rights and
you may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813

Part No. 247355 R0909A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 28
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Creator                         : QuarkXPress(R) 7.31
Producer                        : QuarkXPress(R) 7.31
Create Date                     : 2009:09:18 13:15:22
Modify Date                     : 2009:09:18 13:15:22
Title                           : 285430

EXIF Metadata provided by EXIF.tools

Nordic Track 236650 Owner S Manual 285430

Nordic-Track-Ntel75060-Owner-S-Manual nordic-track-ntel75060-owner-s-manual

AUDIOSTRIDER NTEL7506.0 NTEL7506.0-247355

Navigation menu

Versions of this User Manual:

Views

Navigation