Nortek Security and Control 2GIG CAMHD100 IP Network Camera User Manual 2GIG HD100 Camera Install Instructions online
2GIG Technologies, Inc. IP Network Camera 2GIG HD100 Camera Install Instructions online
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1866660 |
| Application ID | C0upBkyOYdqfHo09RXShlA== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 101.49kB (1268566 bits) |
| Date Submitted | 2012-12-22 00:00:00 |
| Date Available | 2013-06-19 00:00:00 |
| Creation Date | 2004-03-22 01:46:09 |
| Producing Software | Acrobat Distiller 10.1.4 (Windows) |
| Document Lastmod | 2012-12-21 17:40:10 |
| Document Title | 2GIG HD100 Camera Install Instructions (online) |
| Document Creator | FrameMaker 10.0.2 |
| Document Author: | 2GIG |
2GI 2GI 2GIG HD100 CAMERA http://dealer.2gig.com/qr/hd100 Indoor HD camera with night vision INSTALL INSTRUCTIONS This document describes the basic installation information for the 2GIG Technologies HD100 Camera (2GIG‐CAM‐HD100). To install the HD100 Camera, you will need a PC with internet access. WiFi to the On-Site Router Box Contents • • • • • Camera Camera base Wire retention clip Power adapter 4 non‐slip adhesive feet SPECIFICATIONS Ethernet WiFi PIR IR LED Adapter HD Video Protocols 10/100Mbps 802.11b/g/n Max 5m coverage 5m illumination 12V, 1A Up to 720p 15fps H.264, MJPEG INSTALLING THE HD100 CAMERA WiFi to the On-Site Router (WPS) If the on‐site router supports WPS, press the WPS button until the router goes into WPS mode (this will differ slightly from router to router). This action causes the router to listen for a new WPS device. Press the WPS button (A) on the HD100 Camera. This action causes the camera to announce itself to the router as a WPS device. While the camera is in WPS mode, the camera displays a blinking yellow LED. Do not press any buttons on the HD100 Camera until the camera LED displays green, indicating that the camera has successfully connected to the network. From the Alarm.com website add and configure the camera. Connect the camera directly to the router using an Ethernet cable. From the Alarm.com website add and configure the camera to connect using WiFi. Disconnect the Ethernet cable from the camera. A WiFi connection will be established. Ethernet to the Router Connect the camera directly to the router using an Ethernet cable. From the Alarm.com website add and configure the camera. RESET TO DEFAULTS • Press and hold button (B) until the camera LED changes to yellow (approximately 10 seconds). When the camera LED changes to yellow, release button (B) to reset the camera to factory defaults. LED States State Normal Operation Connectivity Problems WPS Transaction in Progress Booting LED Pattern Solid Green Blinking Red Blinking Yellow Solid Yellow IMPORTANT SAFETY INSTRUCTIONS Do not install this device near water. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Only use attachments and accessories specified by 2GIG Technologies. Protect the power cord from being walked on or pinched particularly at the point where it exits from the device. (See figure below) LIMITED WARRANTY This 2GIG Technologies product is warranted against defects in material and workmanship for 1 year. This warranty extends only to wholesale customers who buy direct from 2GIG Technologies or through 2GIG Technologies’ normal distribution channels. 2GIG Technologies does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or liabilities on the part of 2GIG Technologies for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of property, revenue, or profit, or cost of removal, installation, or reinstallation. All implied warranties for functionality, are valid only until the warranty expires. This 2GIG Technologies Warranty is in lieu of all other warranties expressed or implied. All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact 2GIG Technologies at 1(866)670‐ 1591 for an RPA# and other important details. Warranty service return address: 2GIG Technologies, Inc. 2961 W Maple Loop Drive Lehi, Utah 84043 REGULATORY INFORMATION Notice: Unauthorized changes or modifications could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada license‐exempt RSS standard(s). Operating is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Consult the dealer or an experienced radio/television technician for help Technical Support Contact Information Toll Free: 1(800)2GIG‐TECH / 1(800)244‐4832 Email: techsupport @2gig.com Internet: dealer.2gig.com PN: 77‐100001‐001 Rev. D
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 2GIG Create Date : 2004:03:22 01:46:09Z Modify Date : 2012:12:21 17:40:10+09:00 Has XFA : No Language : en Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Creator Tool : FrameMaker 10.0.2 Metadata Date : 2012:12:21 17:40:10+09:00 Producer : Acrobat Distiller 10.1.4 (Windows) Format : application/pdf Title : 2GIG HD100 Camera Install Instructions (online) Creator : 2GIG Document ID : uuid:1129b2dd-2e27-416b-9154-8955ae550d44 Instance ID : uuid:3dbf3565-b641-4d0b-8138-1a2967be3ada Page Mode : UseOutlines Page Count : 4EXIF Metadata provided by EXIF.tools