Nortek Security and Control 00100 SECURITY ALARM TRANSMITTER User Manual 235240A TTLDW01 Tx indd
Nortek Security & Control LLC SECURITY ALARM TRANSMITTER 235240A TTLDW01 Tx indd
Users manual
Copyright © 2013 235240 X11
TTLDW
O
01
TTLDW
C
01
UNIVERSAL
DOOR/WINDOW
TRANSMITTERS
Installation Instructions
PRODUCT DESCRIPTION
The TTLDWO01 and TTLDWC01 are battery powered supervised stationary transmitters. These
transmitters can be used in a variety of wireless security and remote sensing applications.
Triggering the transmitter with its built-in magnetic switch sends a digitally coded wireless signal
to the alarm control.
Both models have an optional external input that can be triggered by dry contact devices. The
Model TTLDWC01 connects to normally closed (N/C) devices. The Model TTLDWO01 connects to
normally open (N/O) devices. The transmitter is programmed using Confi guration Mode to select
the internal magnetic switch only, the external contact input only, or both.
The transmitter can send fi ve different signal types: fault, restore, low battery, tamper, and status.
The system must be programmed to the transmitter’s code before testing and operation. Refer to
the alarm control’s instructions for details on programming.
In a typical installation, the magnet is mounted on a door or window and the transmitter is mounted
on the frame. When the door or window is opened, the magnet moves away from the transmitter
and a fault signal is sent. When the door or window is closed, the magnet returns next to the
transmitter and a restore signal is sent.
About every 65 minutes the transmitter sends a supervisory status signal to update the system.
If the battery tests low, a low battery signal is included with any transmission. The transmitter is
powered from two 3-Volt CR2032 lithium batteries (included).
An internal switch detects if the transmitter’s case is opened. Opening the case will send a tamper
signal. Two screws and double-stick tape are provided for mounting the transmitter.
FEATURES
BATTERY INSTALLATION OR REPLACEMENT INPUT CONFIGURATION MODE OPTIONAL EXTERNAL CONTACT
TRANSMITTER MOUNTING PROGRAMMING & TESTING TATTLETALE PORTABLE ALARM SYSTEMS LIMITED WARRANTY
This TATTLETALE PORTABLE ALARM SYSTEMS product is warranted against defects in material and
workmanship for a period of one year. This warranty does not apply in cases of improper installation, misuse,
failure to follow installation and operating instructions, alteration, abuse, accident or tampering, or repair by anyone
other than tattletale. This warranty does not cover the replacement of batteries that are used to power the product.
There are no obligations or liabilities on the part of TATTLETALE PORTABLE ALARM SYSTEMS for consequential
damages arising out of or in connection with use or performance of this product or other indirect damages with
respect to loss of property, revenue, or profi t, or cost of removal, installation or reinstallation. All implied warranties,
including implied warranties for merchantability and implied warranties for fi tness, are valid only until the warranty
expires. This TATTLETALE PORTABLE ALARM SYSTEMS Warranty is in lieu of all other warranties express or
implied.
All products returned for warranty service require a Return Merchandise Authorization Number (RMA#). Contact
TATTLETALE Technical Support at 1-888-835-5668 or at www.tattletale.com for an RMA # and other important
details.
This device complies with FCC Part 15 and Canada Rules and Regulations. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Conformité Réglementaire
Ce dispositif est conforme à la réglementation de la IC et (Partie 15) de la FCC. Son fonctionnement est soumis à
deux conditions : (1) ce dispositif ne doit pas causer d’interférences nuisibles, et (2) ce dispositif doit accepter toute
interférence reçue, y compris les interférences pouvant entraîner des conditions de fonctionnement indésirables.
Changes or modifi cations to the device may void FCC compliance
Les modifi cations apportées à l’appareil peuvent annuler la conformité FCC.
www.tattletale.com
6269 Frost Road. Westerville OH 43082
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,TTLDWO&C01 - FILE NAME: 235240 X11- INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 11.000” X 8.500” - SCALE: 1-1
TRANSMITTER
MAGNET
DOUBLE-STICK
TAPE
EXTERNAL
CONTACT LEADS
MOUNTING
SCREWS
MAGNET
ALIGNMENT
MARKS
EXTERNAL
CONTACT
MAGNET
3 FEET MAXIMUM
EXTERNAL
CONTACT
CONNECTOR
AN EXTERNAL CONTACT CAN BE CONNECTED TO THE TRANSMITTER
1
PLUG THE EXTERNAL CONTACT LEADS INTO THE
TRANSMITTER'S EXTERNAL CONTACT CONNECTOR
2
WIRE THE EXTERNAL CONTACT TO THE LEADS
FOR MODEL TTLDWC01 USE NORMALLY CLOSED CONTACTS
FOR MODEL TTLDWO01 USE NORMALLY OPEN CONTACTS
TRANSMITTER ON
DOOR FRAME
MAGNET
ON DOOR
OPENING OR
CLOSING THE DOOR
TRIGGERS THE
TRANSMITTER
INSTALLATION TIP: TO MINIMIZE PHYSICAL SHOCK
TO THE UNIT, ALWAYS MOUNT THE TRANSMITTER
ON THE STATIONARY PART OF THE OPENING
1/2" GAP
MAXIMUM !!!
MOUNT MAGNET NEXT
TO ALIGNMENT MARKS
ATTACH MOUNTING PLATE
WITH TWO SCREWS OR USE
THE DOUBLE-STICK TAPE
NOTE: MOUNTING THE TRANSMITTER WITH
DOUBLE-STICK TAPE IS NOT ALLOWED IN
UL INSTALLATIONS
1
REFER TO THE SYSTEM'S
INSTRUCTIONS AND PLACE THE
ALARM CONTROL IN PROGRAM MODE
VERIFY THAT THE TRANSMITTER
HAS BEEN "LEARNED" BY
THE ALARM CONTROL
2
OPEN OR CLOSE THE PROTECTED
DOOR TO SEND A SIGNAL
3
SIGNAL TO
RECEIVER
OPEN
DOOR
TEST THE SYSTEM TO VERIFY
PROPER OPERATION, CHECK
THAT THE SYSTEM INDICATES
WHEN THE DOOR IS OPEN
OR CLOSED
4
NOTICE TO USERS IN CALIFORNIA - CR COIN CELL LITHIUM BATTERY
INFORMATION: THIS PRODUCT CONTAINS A CR COIN CELL LITHIUM
BATTERY WHICH CONTAINS PERCHLORATE MATERIAL - SPECIAL
HANDLING MAY APPLY - SEE
www.dtsc.ca.gov/hazardouswaste/perchlorate
KEEP AWAY FROM SMALL CHILDREN. IF BATTERIES ARE
SWALLOWED, PROMPTLY SEE A DOCTOR. DO NOT TRY TO
RECHARGE THESE BATTERIES. DISPOSAL OF USED BATTERIES
MUST BE MADE IN ACCORDANCE WITH THE WASTE RECOVERY
AND RECYCLING REGULATIONS IN YOUR AREA.
1
TWIST SCREWDRIVER IN SLOT
ON EITHER SIDE TO OPEN CASEOBSERVE
POLARITY !!!
2
TWO CR2032 BATTERIES
INSTALL WITH + SIDE UP
TO REMOVE BATTERIES, TWIST
SMALL SCREWDRIVER HERE
1
2
CONFIGURATION MODE SELECTS IF THE TRANSMITTER USES THE INTERNAL
MAGNETIC SWITCH ONLY, THE EXTERNAL CONTACT INPUT ONLY, OR BOTH
PRESS AND HOLD THE TAMPER SWITCH
TAMPER
SWITCH
INSTALL THE BATTERIES, RELEASE THE
TAMPER SWITCH, CONFIGURATION
MODE WILL LAST FOR 15 SECONDS
TO SELECT EXTERNAL CONTACT ONLY:
BE SURE MAGNET IS AWAY FROM TRANSMITTER
AND EXTERNAL CONTACT INPUT IS DISCONNECTED
TO SELECT INTERNAL MAGNETIC SWITCH ONLY:
BE SURE THE EXTERNAL INPUT IS DISCONNECTED,
MOVE MAGNET NEXT TO TRANSMITTER (BY THE
TAMPER SWITCH) FOR A MINIMUM OF ONE SECOND
WHILE IN CONFIGURATION MODE:
TO SELECT EXTERNAL CONTACT & INTERNAL SWITCH:
BE SURE MAGNET IS AWAY FROM TRANSMITTER,
CONNECT EXTERNAL CONTACT INPUT WIRES
TOGETHER FOR A MINIMUM OF ONE SECOND MOVE MAGNET
NEXT TO UNIT
FOR INTERNAL
MAGNETIC SWITCH
USE ONLY
TO ENTER CONFIGURATION MODE: