Nortek Security and Control DNT00083 Garage Door Controller User Manual 8

Download:
Mirror Download [FCC.gov]
Document ID	56600
Application ID	cKj8X2vbQU++Z/vszqrYCQ==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.49kB (431118 bits)
Date Submitted	1999-08-26 00:00:00
Date Available	1998-10-27 00:00:00
Creation Date	2001-06-05 02:41:30
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-06-05 02:41:32
Document Title	8

anm-nmw
at“ GARAGE noon
Ow fl OPERATORS
With DoorSentry® Infrared Safety Beam
4” Models xx325, xx333 & xx350
Assembly and Installation Instructions
THIS OWNER’S MANUAL CONTAINS COMPLETE INSTRUCTIONS
FOR THE INSTALLATION AND MAINTENANCE OF THIS
GARAGE DOOR OPERATOR SYSTEM. IT SHOULD
BE MOUNTED NEAR THE INSTALLATION
IN A PROMINENT POSITION
A: WARNING A A CAUTION A
To reduce the risk of injury to persons, This door operator will require constant
install this operator on: pressure on the wall button to elose the
SECTIONAL DOOR if channel box is door unless the infrared emitter and
labeled “XSX” orXST. detector are installed and properly
ONE PIECE JAMB DOOR if channel box is aligned.
labeled “XJX” or XJT.
run ‘ ‘v‘fAfif
Quality Garage Door Operators with Linear Radios
(800) 421-1587
GARAGE DOOR TYPES
SECTlDNAL DOOR
ONE PIECE DOOR WITH TRACK
JAMB DOOR
CHECK DOOR BALANCE
For any electric garage door operator to perform saIer, it must
be installed on a properly balanced garage door. The weight 0!
the garage door is counterbalanced by the garage door
springls). The springs must be correctly adjusted and the door
hardware must be lubricated and in good working order. Prior
to testing, disable lock assembly and remove all ropes.
Before installing the garage door operator, test the operation
01 the garage door as follows:
a? Raise the garage door about halfway up, Release yourhold
on the door and see if the door balances. lt shouldn’t go up
or down on its own,
m Slowly open the door all the way, then close it all the way.
Notice if there is any binding, sticking or rubbing caused by
the garage door hardware, track wheels or door frame. The
door should travel smoothly,
If the garage door is unbalanced or if the door travel isn’t
smooth, have a qualified garage door installation professional
adjust or repair the door,
A. WARNING! A
The garage door operator must not be
installed and used on an unbalanced
door. The operator’s internal door
pressure sensor will not function properly
on an unbalanced door. Risk of serious
injury or death may result.
A WARNING!
Garage door hardware (springs, cables,
brackets, pulleys, etc.) are under extreme
pressure and tension. DO NOTATTEMPT
TO LOOSEN, TIGHTEN OR ADJUSTANY
DOOR HARDWARE UNLESS YOU ARE A
QUALIFIED GARAGE DOOR INSTALLATION
PROFESSIONAL!
HARDWARE IDENTIFICATION
E
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:06:05 02:41:30
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:06:05 02:41:32-04:00
Page Count                      : 7

EXIF Metadata provided by EXIF.tools