Nortel Networks 2332 802.11 A/B/G Access Point User Manual 2

Nortel Networks, Inc. 802.11 A/B/G Access Point Users Manual 2

Contents

Users Manual 2

90 External AntennasNN47250-307 (324136-A Version 01.02)9Directional Yagi AntennaNortel Order Number: DR4000077E6 ❥Cushcraft Model PC2415NA36RSM❥2.4 - 2.5 GHz, 14.1 dBi Peak Gain❥Articulating mount for precise direction pointing❥Good for long and narrow zones like tunnels❥3-foot cable❥Measures 26.5” x 3.75” x 1.5”
External Antennas 91Nortel WLAN Access Point 2332 Series Installation Guide
92 External AntennasNN47250-307 (324136-A Version 01.02)
External Antennas 93Nortel WLAN Access Point 2332 Series Installation Guide10 Directional Patch Panel AntennaNortel Order Number: DR4000087E6 ❥Cushcraft Model SR24120DN36RSM❥2.4 - 2.5 GHz, 11 dBi Peak Gain❥Uniform 120 degree H-plane and 14 degree E-plane pattern❥Tilt-mount available for precise direction pointing❥Designed for long, wide coverage environments❥3-foot cable❥Measures 23" x 3" x 2"
94 External AntennasNN47250-307 (324136-A Version 01.02)
External Antennas 95Nortel WLAN Access Point 2332 Series Installation Guide
96 External AntennasNN47250-307 (324136-A Version 01.02)11 Directional Patch Panel AntennaNortel Order Number: DR4000086E6 ❥Cushcraft Model S241290PN36RSM❥2.4 - 2.5 GHz, 12 dBi Peak Gain❥Uniform 90 degree H-plane and 17 degree E-plane pattern❥Tilt-mount available for precise direction pointing(shown)❥Designed for long, wide coverage environments❥3-foot cable❥Measures 26" x 3" x 1"
External Antennas 97Nortel WLAN Access Point 2332 Series Installation GuideHorizontalPolarizationBW = 90 Deg
98 External AntennasNN47250-307 (324136-A Version 01.02)
External Antennas 99Nortel WLAN Access Point 2332 Series Installation Guide2.4/5.0 GHz Dual antenna12 Dual-band, Tri-mode 802.11a/b/g Spatial Diversity AntennaNortel Order Number: DR4000078E6 ❥Cushcraft Model S24493DSN36RSM❥2.4 - 2.5 GHz, 3.0 dBi Peak Gain❥4.90 - 5.15 GHz, 4.0 dBi Peak Gain❥5.15 - 5.25 GHz, 3.9 dBi Peak Gain5.25 - 5.35 GHz, 3.2 dBi Peak Gain5.470 - 5.725 GHz, 2.9 dBi Peak Gain5.725 - 5.85 GHz, 2.6 dBi Peak Gain❥Each antenna port can be used individually for simultaneous 802.11a and 802.11b/g❥Well-suited for high data rate office applications❥3-foot cable❥Measures 6.16” x .89” x 3.66”
100 External AntennasNN47250-307 (324136-A Version 01.02)Azimuth Pattern for 2.4 GHz
External Antennas 101Nortel WLAN Access Point 2332 Series Installation GuideElevation Pattern 1 for 2.4 GHz
102 External AntennasNN47250-307 (324136-A Version 01.02)Elevation Pattern 2 for 2.4 GHz
External Antennas 103Nortel WLAN Access Point 2332 Series Installation GuideAzimuth Pattern for 5.0 GHz
104 External AntennasNN47250-307 (324136-A Version 01.02)Elevation Pattern 1 for 5.0 GHz
External Antennas 105Nortel WLAN Access Point 2332 Series Installation GuideElevation Pattern 2 for 5.0 GHz
106 External AntennasNN47250-307 (324136-A Version 01.02)Glossary of common antenna terminologyThe following glossary includes basic antenna terminology that can help in the selection and/or recommendation of a particular antenna. These terms are used throughout the remainder of the document:Omnidirectional (Omni) – Refers to the antenna coverage pattern. An omnidirectional antenna creates a uniform coverage pattern. Most omnidirectional antennas are weakest directly above and directly below their endpoints – this characteristic creates the familiar dual-lobe pattern shown on the E-plane graphs. Nulls are typically related to the orien-tation of the dipole/monopole antenna relative to the horizontal or vertical planes. The lobes grow and shrink depending upon the ground plane effects and cancellation/addition of the radiating signal. Omnidirectional antennas are suitable for most general deployments.Directional – Refers to the antenna coverage pattern. A directional antenna focuses its lobe or radiated energy in a particular direction. In general, as the gain of a directional antenna increases, the radiating beamwidth or lobe decreases. This design increases the transmitted power and communication distance in a specific direction at the expense of uniform coverage, as compared to an omnidirectional antenna. A directional antenna must be “aimed” at the intended coverage zone.Gain – Expressed in dBi, indicates the relative increase in radiated power over an isotropic point radiating source with a reference gain of 1.0.Each 3 dB increment in power effectively doubles the radiated energy. For example, an antenna with a gain of 9 dBi increases the transmit power 8 times more than an isotropic point radiating source. For example:12.5 mW = 11 dBm11 dBm + 9dBi = 20 dBm20 dBm = 100 mW100mw/12.5 mW = 8 times more powerE-Plane graph – The elevation plane graph shows the radiated antenna coverage pattern as a vertical cross section - as if looking directly at the antenna from the side.H-Plane graph – The horizontal plane graph shows the radiated antenna coverage pattern as a horizontal cross section - as if looking directly at the antenna from above.
107Nortel WLAN Access Point 2332 Series Installation GuideAP troubleshootingAfter you insert the Cat-5 cable into an AP’s port connector and enable PoE on the cable, observe the device’s health or LINK LED to determine the status of the connection with the WSS. • If the LED is green and is glowing steadily, the AP was booted successfully by the WSS and is ready for operation. • If the LED is not steadily glowing green, see Table 5.(For descriptions of all the LEDs, see “Status LEDs” on page 28.)Table 5: Health LED States (2332 Series)Health or LINK LED Appearance Diagnosis RemedyNot solid green AP radio needs to be enabled. Enable at least one of the radios. If the LED is still not solid green, try the remedy listed in this table based on the LED’s appearance.Unlit AP is not receiving power. Check the Cat-5 cable connection(s).For a direct connection to a WSS:• Set the port type on the WSS to an AP port. • Verify that Power over Ethernet (PoE) is enabled on the WSS port connected to the AP.For an indirect connection through the network:• Configure a AP connection on a WSS.• Verify that a Nortel-approved PoE source is supplying power to the AP.Slowly alternating green and amberAP is booting with an image received from a WSS.Wait a few seconds for the boot process to complete. If this LED appearance persists, enable a radio or place a radio in sentry mode.Solid amber AP is waiting to receive boot instructions and a configuration file from a WSS.Wait a few seconds for the boot process to begin. If the LED remains amber, try the remedies for the other health LED appearances. If the LED still remains amber, make sure the AP is securely connected to its PoE source and to the network or WSS.
108 AP troubleshootingNN47250-307 (324136-A Version 01.02)
109Nortel WLAN Access Point 2332 Series Installation GuideAP technical specificationsThis appendix lists the technical specifications for the Nortel 2332 Series access points. Table 6 lists the mechanical and compliance specifications. Table 7 on page 110, Table 8 on page 111, and Table 9 on page 111 list the radio specifica-tions. Table 10 on page 112 lists the MAC address allocation scheme.(For specifications for the WSS, see the Nortel WLAN-Security Switch 2300 Series Configuration Guide.) Note. The 2332 Series access points are designed and approved to be used only with Nortel WLAN—Security Switch (WSS) models 2360/2361, and 2350. (The 2380 and 2382 does not directly connect to the AP.)Note. The AP radios are disabled by default and can be enabled only by the system administrator using the WLAN Management softwareapplication or the WSS’s command-line interface (CLI). Note. The radio frequency band, operating channels, and transmit power depend on the country of operation specified by the system administrator using WLAN Management software or the WSS’s CLI.Table 6: AP Mechanical and Compliance SpecificationsSpecification DescriptionSize Diameter: 16.76 cm (6.6 inches)Height: 6.1 cm (2.4 inches)Weight Without mounting bracket: 0.45 kg (16 ounces)With mounting bracket: 0.5 kg (17.5 ounces) Operating Temperature 0° C to +50° C (32° F to 122° F)Storage Temperature -20° C to +70° C (-4° F to +158° F)Humidity 10% to 95% noncondensingPower over Ethernet (PoE) 42 VDC to 57 VDC (46 VDC nominal)IEEE 802.3afStatus indicators Health/WSS and radio LEDs(For descriptions of the LEDs, see “Status LEDs” on page 28.) Wired network ports Two RJ-45 ports for 10/100BASE-T Ethernet and Power over Ethernet (PoE) for the 2332 Series only.
110 AP technical specificationsNN47250-307 (320661-A Version 01.02)Standards compliance IEEE 802.11IEEE 802.11aIEEE 802.11bIEEE 802.11gIEEE 802.3afSafety and electromagnetic complianceFCC Part 15, UL 60950IC Part 15, CSA 22.2 N0-950, RSS-139-1 and RSS-210ETS 300-328 (2.4 GHz) and 301-893 (5 GHz), EN 301-489-17R&TTE Directive 1999/5/ECTELEC, ARIB T66GBT-15941-1995, GBT-16841-1997LP0002Encryption Wi-Fi Protected Access (WPA)Advanced Encryption Standard (AES) 40-bit/104-bit Wired-Equivalent Privacy (WEP)General Power-save mode supportedTransmit power control in 1 dB incrementsSupports up to 250 clients per radioTable 7: 802.11a Radio SpecificationsSpecification DescriptionAntenna type Integrated omnidirectional with (2) radiating elements to allow for the use of diversityAntenna gain Internal: 5.15 - 5.35 GHz = 2.0 dBi peak, 5.470 - 5.725 GHz = 2.48 dBi peak and 5.725 - 5.850 GHz = 0.65 dBi peakFrequency band 5.15 - 5.25 GHz, 5.25 - 5.35 GHz, 5.470 - 5.725 GHz and 5.725 - 5.85 GHz, based on country regulationsOperating channels Based on the country of operation specified by the system administratorAssociation rates 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and 6 Mbps, with automatic fallbackModulation Orthogonal frequency division multiplexing (OFDM)Transmit power Based on the country of operation specified by the system administratorTable 6: AP Mechanical and Compliance Specifications (continued)Specification Description
AP technical specifications 111Nortel WLAN Access Point 2332 Series Installation GuideMAC addressesEach 2332 Series is assigned a unique block of 64 MAC addresses. Each radio has 32 MAC addresses and can therefore support up to 32 SSIDs, with one MAC address assigned to each SSID as its BSSID.An AP’s MAC address block is listed on a label on the back of the AP. If the AP is already deployed and running on the network, you can display the MAC address assignments by using the show {ap | dap} status command.All MAC addresses on an AP are assigned based on the AP’s base MAC address, as described in Table 9 on page 111.Table 8: 802.11b Radio SpecificationsSpecification DescriptionAntenna type Integrated omnidirectional with (2) radiating elements to allow for the use of diversityAntenna gain Internal: 2.48 dBi peakFrequency band 2.4 GHz to 2.4835 GHz based on country regulationsOperating channels Based on the country of operation specified by the system administratorAssociation rates 11 Mbps, 5.5 Mbps, 2 Mbps, and 1 Mbps, with automatic fallbackModulation BPSK, QPSK, CCKTransmit power Based on the country of operation specified by the system administratorTable 9: 802.11g Radio SpecificationsSpecification DescriptionAntenna type Integrated omnidirectional with (2) radiating elements to allow for the use of diversityAntenna gain Internal: 2.48 dBi peakFrequency band 2.4 GHz to 2.4835 GHz based on country regulationsOperating channels Based on the country of operation specified by the system administratorAssociation rates 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and 6 Mbps, with automatic fallbackModulation Orthogonal frequency division multiplexing (OFDM)Transmit power Based on the country of operation specified by the system administrator
112 AP technical specificationsNN47250-307 (320661-A Version 01.02)Table 10: MAC Address Allocations on an 2332 Series AP base MAC Address• The AP has a base MAC address. All the other addresses are assigned based on this address. Ethernet Port MAC Addresses• Ethernet port 1 equals the AP base MAC address.• Ethernet port 2 equals the AP base MAC address + 1.802.11a Radio and SSID MAC Addresses• The 802.11a radio equals the AP base MAC address + 1.• The BSSIDs for the SSIDs configured on the 802.11a radio end in odd numbers. The first BSSID is equal to the AP’s base MAC address + 1. The next BSSID is equal to the AP’s base MAC address + 3, and so on. 802.11b/g Radio and SSID MAC Addresses• The 802.11b/g radio equals the AP base MAC address. • The BSSIDs for the SSIDs configured on the 802.11b/g radio end in even numbers. The first BSSID is equal to the AP’s base MAC address. The next BSSID is equal to the AP’s base MAC address + 2, and so on.
113Nortel WLAN Access Point 2332 Series Installation GuideTranslated caution statement, warning conventions and warning messagesThe following caution statement, warning conventions, and warning messages apply to this manual.Caution! The 2332 Series radios are disabled by default and can be enabled only by a system administrator using the WSS. Warnen Sie! Die 2332 Series-Radios werden von Versäumnis außer Betrieb gesetzt und werden von nur einem Systemverwalter ermöglicht, der den WSS benutzt.Avise! Las radios de 2332 Series son por defecto inválidas y sólo pueden ser habilitadas por un administrador del sistema que usa el WSS.Avertissez! Les radios 2332 Series sont desactivées par défaut et peuvent être permises seulement par un administrateur du système qui utilise le WSS.Acautele! Os rádios de 2332 Series são inválidos através de falta e só podem ser habilitados por um administrador de sistema que usa o WSS.Avverta! Le radio di 2332 Series sono disabilitate per difetto e possono essere abilitate solamente da un amministratore di sistema che usa il WSS.
114 Translated caution statement, warning conventions and warning messagesNN47250-307 (324136-A Version 01.02)Warning conventionsWarning! This situation or condition can cause injury.Warnung! Diese Situation oder dieser Zustand kann zu Verletzungen führen.Aviso! Esta situación o condición puede causar lesiones.Avertissement! Cette situation ou cette condition peuvent provoquer des blessures.Advertindo! Esta situação ou condição podem causar dano.Avvertendo! Questa situazione o la condizione possono provocare danno.Warning! High voltage. This situation or condition can cause injury due to electric shock.Warnung! Hochspannung. Diese Situation oder dieser Zustand kann einen Elektroschock verursachen.Aviso! Alta tensión. Esta situación o condición puede causar lesiones por descarga eléctrica. Avertissement! Haute tension. Cette situation ou cette condition peuvent provoquer des blessures dues à des décharges électriques.Advertindo! Voltagem alta. Esta situação ou condição podem causar dano devido a choque elétrico.Avvertendo! Tensione alta. Questa situazione o la condizione possono provocare danno a causa di colpo elettrico.
Translated caution statement, warning conventions and warning messages 115Nortel WLAN Access Point 2332 Series Installation GuideQualified service personnel warningWarning! Installation must be performed by qualified service personnel only. Read and follow all warning notices and instructions marked on the product or included in the documentation.Warnung! Die Installation darf nur von einem qualifizierten Kundendienstmitarbeiter vorgenommen werden. Lesen Sie alle Warnhinweise und Anweisungen auf dem Produkt oder in der Dokumentation und befolgen Sie sie. Aviso! Sólo puede realizar la instalación personal cualificado de asistencia técnica. Lea y siga todas las notas de advertencia e instrucciones indicadas en el producto o incluidas en la documentación.Avertissement! L’installation doit être effectuée uniquement par des techniciens qualifiés. Lisez et suivez toutes les notices d’avertissement et les instructions figurant sur le produit ou comprises dans la documentation. Advertindo! Instalação só deve ser executada através de pessoal de serviço qualificado. Leia e siga toda a advertência nota e instruções marcaram no produto ou incluíram na documentação.Avvertendo! L'installazione deve essere compiuta solamente da personale di servizio qualificato. Legga e segua ogni avvertimento nota e le istruzioni marcarono sul prodotto o incluso nella documentazione.
116 Translated caution statement, warning conventions and warning messagesNN47250-307 (324136-A Version 01.02)Radio safety warnings Warning! Install this device in such a manner as to maintain a minimum of 20 cm (7.9 inches) separation distance between the radiating element(s) and all persons. This safety warning conforms with FCC radio frequency exposure limits.Warnung! Installieren Sie dieses Gerät auf so eine Weise, um ein Minimum von 20 beizubehalten cm (7.9 Zoll) Trennungsentfernung zwischen dem ausstrahlenden Element (s) und allen Personen. Diese Sicherheitswarnung richtet sich nach FCC Radio Häufigkeit Aussetzung Grenzen.Aviso! Instale este dispositivo de tal una manera acerca de mantenga un mínimo de 20 distancia de separación de centímetro (7.9 pulgadas) entre los elementos radiando y todas las personas. Este seguridad advirtiendo conforma con FCC radio frecuencia exposición límites.Avertissement! Installez cet appareil dans une telle manière comme pour maintenir un minimum de distance de la séparation de 20 centimètres (7.9 pouces) entre le ou les éléments rayonnant et toutes les personnes. Ce sécurité prévenir se conforme avec FCC envoyez par radio des limites de l'exposition de la fréquence.Advertindo! Instale este dispositivo de tal uma maneira sobre mantenha um mínimo de 20 cm (7.9 polegadas) distância de separação entre o elemento radiando e todas as pessoas. Este segurança advertindo conforma com FCC rádio freqüência exposição limites.Avvertendo! Installi questa apparecchiatura in tale maniera come mantenere un minimo di 20 distanza di separazione di cm (7.9 pollici) tra l'elemento che irradia e tutte le persone. Questo sicurezza avvertendo adatta con FCC radio frequenza esposizione limiti.
Translated caution statement, warning conventions and warning messages 117Nortel WLAN Access Point 2332 Series Installation GuideWarning! Do not operate access point near unshielded blasting caps or in an otherwise explosive environment unless the device has been modified for such use by qualified personnel. Warnung! Die Zugriffspunkte sollten nicht neben ungeschirmten Sprengkapseln betrieben oder in einer explosiven Umgebung eingesetzt werden. Für einen solchen Einsatz muss das Gerät von einem qualifizierten Kundendienstmitarbeiter entsprechend angepasst werden. Aviso! No utilice el punto de acceso de cerca de detonadores no blindados ni en un entorno explosivo, a menos que haya sido modificado el dispositivo con ese fin por personal cualificado. Avertissement! Le point d’accès ne doit pas fonctionner près de détonateurs non blindés ou dans un autre environnement qui présent un risque d’explosion, à moins que cet appareil n’ait été adapté en vue d’une telle utilisation par du personnel qualifié. Advertindo! Não opere ponto de acesso próximo unshielded que dinamita bonés ou em um caso contrário ambiente explosivo a menos que o dispositivo fosse modificado para tal uso através de pessoal qualificado.Avvertendo! Non azioni punto di accesso vicino ad unshielded che danneggia berretti o in un altrimenti ambiente esplosivo a meno che l'apparecchiatura è stata cambiata per tale uso da personale qualificato.
118 Translated caution statement, warning conventions and warning messagesNN47250-307 (324136-A Version 01.02)Warning! Do not touch or move the access point when the antennas are transmitting or receiving.Warnung! Berühren oder bewegen Sie den Zugriffspunkt nicht, während die Antennen senden oder empfangen.Aviso! No toque ni mueva el punto de acceso de cuando las antenas estén transmitiendo o recibiendo señales. Avertissement! Ne touchez ni ne déplacez le point d’accès lorsque les antennes sont en cours de transmission ou de réception.Advertindo! Não toque ou mova o ponto de acesso quando as antenas estiverem transmitindo ou estão recebendo..Avvertendo! Non tocchi o trasporti il punto di accesso quando le antenne stanno emettendo o stanno ricevendo..
Translated caution statement, warning conventions and warning messages 119Nortel WLAN Access Point 2332 Series Installation GuideWarning! Before using a wireless device in a hazardous location, consult the local codes, national codes, and safety directors of the location for usage constraints.Warnung! Bevor Sie drahtlose Geräte an einem gefährlichen Standort einsetzen, sollten Sie die lokalen und nationalen Regelungen und Sicherheitsbestimmungen des Standorts auf Nutzungsbeschränkungen überprüfen.Aviso! Antes de utilizar un dispositivo inalámbrico en una ubicación peligrosa, consulte los códigos locales y nacionales y a los responsables de seguridad de la ubicación para conocer las restricciones de uso. Avertissement! Avant d’utiliser un appareil sans fil dans un endroit dangereux, consultez la réglementation locale et nationale ainsi que les responsables de la sécurité de l’endroit concerné pour obtenir des informations relatives aux conditions et aux limites d’utilisation de cet appareil.Advertindo! Antes de usar um dispositivo sem fios em um local perigoso, consulte os códigos locais, códigos nacionais, e diretores de segurança do local para constrangimentos de uso.Avvertendo! Prima di usare un'apparecchiatura senza fili in un'ubicazione azzardata, consulti i codici locali, codici nazionali, e direttori di sicurezza dell'ubicazione per costrizioni di uso.
120 Translated caution statement, warning conventions and warning messagesNN47250-307 (324136-A Version 01.02)Warning! Intentional radiators, such as the Nortel WLAN 2332 Series are not intended to be operated with any antenna(s) other than those furnished by Nortel. An intentional radiator may only be operated with the antenna(s) with which it is authorized. For a complete listing of the authorized antennas for use with this product, visit http://www.nortel.com/support Warnung! Absichtliche Heizkörper, wie der Nortel WLAN Zugangspunkt 2332 Series sollen nicht mit irgendeinem antenna(s) anders als die bearbeitet werden versorgt worden von Nortel. Ein absichtlicher Heizkörper kann mit dem antenna(s) nur bearbeitet werden,mit dem er autorisiert wird. Für eine komplette Auflistung der autorisierten Antennen für Gebrauch mit diesem Produkt, Besuch http://www.nortel.com/support. Aviso! Os radiadores intencionais, tais como o ponto de acesso 2332 Series de Nortel WLAN não são pretendidos ser operados com nenhum antenna(s) à excepção daqueles fornecido por Nortel. Um radiador intencional pode somente ser operado com o antenna(s) com que é autorizado. Para uma lista completa das antenas autorizadas para o uso com este produto, visita http://www.nortel.com/support Avertissement! Des radiateurs intentionnels, tels que le point d'accès de Nortel WLAN 2332 Series ne sont pas prévus pour n'être actionnés avec aucun antenna(s) autre que ceux meublé par Nortel. Un radiateur intentionnel peut seulement être actionné avec l'antenna(s) avec lequel il est autorisé. Pour une liste complète des antennes autorisées pour l'usage avec ce produit, visite http://www.nortel.com/support ¡Advertencia! Los radiadores intencionales, tales como el punto de acceso de Nortel WLAN 2332 Series no se piensan para ser funcionados con ningún antenna(s) con excepción de ésos equipado por Nortel. Un radiador intencional se puede funcionar solamente con el antenna(s) con el cual se autoriza. Para un listado completo de las antenas autorizadas para el uso con este producto, visita http://www.nortel.com/support.Avvertimento! I radiatori intenzionali, quale il punto di accesso di Nortel WLAN 2332 Series non sono intesi per essere funzionati con alcun antenna(s) tranne quelli ammobiliato da Nortel. Un radiatore intenzionale può essere funzionato soltanto con il antenna(s) con cui è autorizzato. Per un elenco completo delle antenne autorizzate per uso con questo prodotto, chiamata http://www.nortel.com/support.
Nortel WLAN Access Point 2332 Series Installation Guide121IndexNumerics2.4/5.0GHz Dual Antenna 99AAccess Point. See APaccess point. See AP (Access Point)advisory notices, explanations of 23Antenna Descriptions802.11a (5GHz) Antennas 66802.11b/g (2.4GHz) Antennas 75AP (Access Point)description of 25installation 31, 35specifications 109troubleshooting 107warnings 113Bbracket 28Ccable ports 28cable requirements 34Category 5 cables 28ceiling installationdrop tiles 41solid 49suspended, flush tiles 37connectionsdual-homed 28LEDs 54troubleshooting 107DDirectional Panel Antenna 84, 87Directional Yagi Antenna 90, 93documentation, product 22drop ceiling installation 41Dual-band, Tri-mode 802.11a/b/g Spatial Diversity Antenna 99dual-homed connections 28EEthernetcable requirements 34connections to a WSS, AP port locations 28LEDs 54ports 28Fflush ceiling installation 37Hhardwarebottom view 26features 26inventory 31mounting bracket 28required, list of 35top view 26health LEDdescription 29troubleshooting with 107verifying AP health with 55High-Gain Directional Panel Antenna 72
122NN47250-307 (324136-A Version 01.02) IinstallationAP 31, 35junction box 46requirements 32requirements, tools 35solid surface 49suspended ceilings 41suspended ceilings, flush tiles 37T-bar ceilings. See suspended ceilingswarnings, cables 34warnings, radio 33warnings, service 25warnings, translations 113IP addresses 111Jjunction box installation 46KKensington security slot 28LLEDs 28AP (on WSS) 54health 29, 55, 107radio 29linksAP 54dual-homed 28LEDs 54troubleshooting 107MMAC addresses 111manuals, product 22mounting bracket 28mounting options 28Nnetwork plan, WLAN Management System 32Nortel Mobility System 21OOmnidirectional Ceiling Panel Antenna 78, 81Omnidirectional Colinear Dipole Antenna 75PPoE (Power over Ethernet)pin signals 34specifications 109use with Nortel devices only 33ports 28product documentation 22Rradio LEDs 29radiosdefault state 113health 107radio LEDs 29specifications 109status 29troubleshooting 107warnings 33redundancy 28requirements 32cables 34hardware 35RJ-45s 28Ssafety notices, explanations of 23solid surface installation 49specifications 109status LEDs. See LEDsstatus lights. See LEDssuspended ceilings, installationdrop tiles 41flush tiles 37switch. See WSS (WLAN Security Switch)
123Nortel WLAN Access Point 2332 Series Installation Guide TT-bar ceilings. See suspended ceilingstechnical specifications 109tools 35translated warnings 113troubleshooting 107Uuniversal mounting bracket 28unpacking an AP 31Wwall installationjunction box 46recommendations 33solid 49warningscable 34installation 25radio 33translations 113Wide-band Ceiling Mount Squint® Antenna 66Wide-band Omni Antenna 69WLAN Management Systemwall installation recommendations 33work order 32WLAN Security Switch. See WSSwork order, WLAN Management System 32WSS (WLAN Security Switch)AP LEDs 54recommendation 33
124NN47250-307 (324136-A Version 01.02)
Nortel WLAN Access Point 2332 Series Installation GuideNortel WLAN 2332 SeriesRelease 6.0Document Number: NN47250-307Document Status: DraftDocument Version: 01.02Part Code: 324136-ARelease Date: July 2007Copyright © Nortel Networks Limited 2007 Alll Rights ReservedThe information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Net-works.*Nortel, Nortel Networks, the Nortel logo, and the Globemark are trademarks of Nortel Networks.*Microsoft, MS, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corpora-tion.All other trademarks and registered trademarks are the property of their respective owners.To provide feedback, or to report a problem in this document, go to www.nortel.com/documentfeedback.

Navigation menu