Nortel Networks Sonar T24 Users Manual Key Indicator Module (KIM) Installation Card

PDF Nortel T24 Key Indicator Module Install Card T E X T F I L E S

T24 Key Indicator Module Install Card T24 Key Indicator Module Install Card Free Phone System Manuals Voice Communications 800 593-6000

T24 Key Indicator Module Install Card T24 Key Indicator Module Install Card

T24 to the manual a6a39159-b913-4640-a837-33cd50ea1479

: Nortel-Networks Nortel-Networks-Sonar-T24-Users-Manual-346462 nortel-networks-sonar-t24-users-manual-346462 nortel-networks pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Return
to Menu

T24 Key Indicator Module
(KIM) Installation Card

The T24 Key Indicator Module (KIM) is an add-on device which provides 24 extra memory or
line buttons for the T7316E telephone. Up to nine KIMs can be connected to a T7316E
telephone.
A Station Auxiliary Power Supply (SAPS) is required for T7316E telephones that have five to
nine KIMs attached. For SAPS installation instructions, refer to the SAPS Installation Card
provided with the SAPS kit.
Single T24 KIM installation

Multiple T24 KIM installation

1 Position the metal hooks

1 Position the T7316E

from the left side of the KIM
next to the slots on the right
side of the T7316E
telephone.
Firmly press the T7316E and KIM together.

T24 KIM Installation

2 Slide the KIM down until its

2 Slide the KIMs down

aligned with the T7316E
telephone.

3 Remove the stand
from the T7316E
telephone.

telephone and KIMs
together. Align the
hooks on each KIM
to the slots on the
next KIM.
Firmly press the T7316E and KIMs together.

until they are aligned
with the T7316E
telephone.

Press here
to remove stand.

4 Connect the KIM
cord to the accessory
connector port on the
T7316E telephone.

3 Remove the
stands from
KIMs and
the T7316E
telephone.

Press here
to remove
stands.

4 Connect each KIM
cord to the connector
port on the next KIM
in a daisy-chain
order.

KIM 3 KIM 2 KIM 1
Cord to
T7316E

5 Replace the stand on the T7316E telephone to
complete the installation.

5 Connect the cord
on the first KIM
to the accessory
connector port on
the T7316E
telephone.

KIM 1

6 Replace the stands on the KIMs and the
T7316E telephone to complete the installation.

T24 KIM initialization

KIM button number assignment

KIM indicators turn on and flash during the first ten seconds
after powering up. It can take up to five minutes for the KIM
to initialize.
The default setting for the programmable memory buttons
on the KIM is blank. The side illustration shows the button
number assignment on a KIM.
Troubleshooting Tip: An Addon Errormessage appears
on the T7316E telephone display and an error tone is
generated when there is a connector problem with a KIM.
Check that the KIM cord is properly inserted into the
accessory connector port of the T7316E telephone.

B01

B13

B02

B14

B03

B15

B04

B16

B05

B17

B06

B18

B07

B19

B08

B20

B09

B21

B10

B22

B11

B23

B12

B24

T24 KIM coldstarts
Internal autodial numbers can be automatically assigned to the programmable memory buttons on the
KIM when a coldstart is performed. Internal autodial numbers are assigned in ascending order starting
on the top left button (button 01) on the KIM. A coldstart must be performed during the first ten seconds after powering up a KIM.
To coldstart an individual KIM

To coldstart all KIMs

1 Unplug the T7316E telephone line cord, then

1 Unplug the T7316E telephone line cord, then

reconnect it to power up.

2 While the indicators are
flashing on the individual
KIM, simultaneously press
the top two and the bottom
two buttons on the lower
button set of the KIM, as
shown in the illustration

reconnect it to power up.

2 While the indicators are
flashing on the first KIM
(next to the telephone),
simultaneously press the
top two buttons and the
bottom two buttons on the
KIM, as shown in the
illustration.

(buttons: 05, 12, 17 and 24).
(buttons: 01, 12, 13 and 24)

3 At the beginning of the coldstart, indicators beside

3 At the beginning of the coldstart, indicators beside

each KIM button will briefly flash starting at the
bottom right button (button 24).

each KIM button will briefly flash starting at the
bottom right button (button 24).

4 When the KIM coldstart is completed, the T7316E

4 When the KIM coldstart is completed, the T7316E

telephone display automatically returns to the time
and date.

telephone display automatically returns to the time
and date.
1-800-4 NORTEL
www.nortelnetworks.com
P0603481_02
Printed in Canada

2



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:04:09 11:29:34
Producer                        : Acrobat Distiller 4.05 for Windows
Author                          : 
Title                           : T24 Key Indicator Module (KIM) Installation Card
Creator                         : FrameMaker+SGML 5.5.6p145
Modify Date                     : 2003:05:23 16:18:08-06:00
Page Count                      : 2
Has XFA                         : No

EXIF Metadata provided by EXIF.tools