Norton 7200 Electromechanical Closer 43063

User Manual: Norton 7200 Electromechanical Closer Catalog

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

7200 series
Electromechanical
Closer/Holder

7200 SERIES
electromechanical closer/holder
introduction
The 7200 Series Electromechanical Closer/Holders combine the functions
of an electromechanical door holder with the 7700 series door closer. The
7200 features a choice of two types of hold open functions:
Selective Hold Open (Standard): The door will hold open at any degree of
opening beyond a pre-set hold open point, up to 175°, with a maximum
allowable door opening of 180° (the exception is series 7250 which opens
to 110°).
Infinite Hold Open: The door will hold open at any degree of opening up
to 175° with a maximum allowable door opening of 180° (the exception
is series 7250 which opens to 110°). Infinite Hold Open can be set in the
field by turning the cam.

TABLE OF CONTENTS
Overview, Basic Units, Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Compliance Standards, How To Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7210/7250
Master Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Slave/Support Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7220/7230
Master Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Slave/Support Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7240 Connected Free Swing Releasing Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7290 Overhead Concealed Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15

Copyright © 2005-2016, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

7200 SERIES
electromechanical closer/holder
overview
Master Unit Shown

Selective Hold Open Cam
& Switch

Test Switch*
Input & Control
Terminal Strip

Electrohydraulic
Holder

Closer Body

Smoke Detector
Module*

*Master Unit Only

basic units
Master Unit: 7200MPDO
Consists of an on-board power supply (for 120VAC input option) or a
terminal strip (for 24VDC input option), an integral smoke detector module
and a door closer assembly with internal electro-hydraulic holder capability.
A Master Unit can control a single door or one leaf of a pair of doors. A
24VDC Slave/Support Unit is required on the opposite door leaf.

Slave/Support Units: 7200MPSO
Identical in size to the Master Unit, the Slave/Support Unit consists of an
on-board power supply (for 120VAC input option) or a terminal strip (for
24VDC input option) and a door closer assembly with internal electrohydraulic holder capability. This unit (120VAC or 24VDC) is intended to
control a single door or a pair of doors where the building's alarm system
monitors the power to the Slave/Support Unit (24VDC input) or to control
the inactive leaf of a pair of doors where the active leaf is controlled by a
Master Unit.

Executive™ Unit: RFS Suffix
Identical in size and appearance to a Master Unit, the Executive Unit
consists of an on-board power supply (for 120VAC input option) or a
terminal strip (for 24VDC input option), a 433MHz radio frequency
receiver and a door closer assembly with internal electro-hydraulic holder
capability. Unit is intended to provide remote wireless release of a door
that has been manually placed into the electrified hold open position. Not
intended for use in life safety applications.

specifications
Closer for __________ doors shall be electromechanical (with integral smoke detector) and completely enclosed in a metal cover. Units shall be surface
mounted to the frame face [on the pull (hinge side) or the push (opposite hinge side)] of the door [and shall project no more than 2-11/16" (68mm) from
the surface of the frame]. (Closer shall be installed in the header of the frame, and the slide track mortised into the door’s top rail). Closer unit shall be
hydraulic, full rack and pinion type with a cast aluminum alloy shell. Hydraulic fluid shall be non-gumming and non-freezing. Closer unit shall have two noncritical valves to independently regulate closing and latch speed. It shall also have an adjustable backcheck with a hex-key. Closer unit shall have spring
power adjustment to permit a 50% increase in closing power over the minimum closing force for any size. Electromechanical Closer shall have (Infinite)
(Selective) Hold Open (Free Swing Operation) and shall be able to attain a maximum opening of 180° (with hold open to 175°). Unit to be fail safe and
must close the door during any electrical power interruption to the unit. (Closer/Holder to be Executive Door Holder/Release with release actuated by
battery operated hand-held controller). Unit(s) to operate on (120VAC, 60Hz) (24VDC) and will accept (surface) (concealed) wiring. Amperage draw shall
not exceed (.105 Amps for 24VDC) (0.46 Amps for 115VAC) units. Supplier to coordinate electrical requirements with electrical and alarm system engineers.
Wiring (and conduit) by others.
Electromechanical Units to be Norton® Series 7200 (Closer/Holder) (Free Swing Releasing Device), (Executive Door Holder/Release).

7200 SERIES
electromechanical closer/holder
features
Aluminum Alloy Housing
Closer bodies are constructed of a special aluminum alloy, carefully
selected to accommodate interactive steel components and operating
conditions.
Rack & Pinion Operation
Provides a smooth constant control of the door through its full opening and
closing cycle.

Handed
Specify right or left hand when ordering.
Selective Hold Open (Standard)
The door will hold open at any degree of opening beyond a pre-set hold
open point, up to 175°, with a maximum allowable door opening of 180°
(exception series 7250 at 110°).

Spring Sizes
Specify closer size 3, 4 or 5. Size 6 available with 7290 overhead
concealed units.

Infinite Hold Open
The door will hold open at any degree of opening up to 175°, with a
maximum allowable door opening of 180° (exception series 7250 at 110°).
Can be set in the field by turning cam.

Sweep Speed Control Valve
Allows adjustment of door speed from the door’s full open position down to
approximately 10° from the closed position.

Fail Safe
In the event of a power failure, the solenoid will de-energize and the
closer/holder will then operate as a normal door closer.

Latch Speed Control Valve
Allows adjustment of door speed from approximately 10° down to the
door’s fully closed position.

Wiring Option
All 7200 Series Electromechanical Closer/Holders will accommodate
either concealed or surface wiring.

Adjustable Backcheck Cushioning
Provides control of the door in the opening cycle, beginning at
approximately 75° of door opening. It slows/cushions the door opening,
when the door is forcibly opened beyond its pre-adjusted limits.

Selective Hold Open Switch and Cam:
The Selective Hold Open starting point is determined by a switch and
adjustment cam assembly. The cam is attached to the upper pinion shaft
by means of a machine screw. As the door is opened, the pinion shaft will
rotate the cam and operate the switch to the “on” position to initiate hold
open. When the door is closed, the pinion cam will operate the switch to
the “off” position. The cam is factory set to operate at 80° of door opening.
The cam can be easily field adjusted to operate at virtually any degree of
door opening.

Adjustable Backcheck Position Valve
Allows the door opening position, where backcheck cushioning begins, to
be adjusted to a greater door angle, up to a maximum of 20° farther
(approximately 95°).

UNITS WITH DETECTORS
Fire/Smoke Control Circuit:
Interprets the signal from the detector and provides switching contacts to
interrupt hold open solenoid, to sound alarms, etc.
Alarm (Relay) Contacts:
Normally open in standby condition (operating and sensing for smoke
condition). These contacts close during an alarm condition (smoke detected)
and may be used to switch power from the solenoid to an optional local
alarm.
Trouble (Relay) Contacts:
Normally closed in standby condition, these supervisory contacts monitor
the continuity of power within the detector circuit. Any power interruption
within the detector circuit will open these contacts. They can then be used
to simultaneously indicate a Trouble Condition to the Alarm Panel on a
separate trouble circuit.

Locked-In Alarm:
The unit which alarms must be manually reset. This can be accomplished
by remote control from the alarm system panel or by the reset switch in
the smoke detector module. Reset switch is accessible through the center
louver in the cover. Reset by rotating LED chambers using small flat blade
screwdriver.
Indicator Lights:
Normal Mode: A red LED flashes once every eight (8) seconds.
Clean Mode: A red LED flashes once every second.
Alarm Mode: A red LED illuminates continuously.
Test Switch:
Permits door to be released from hold open without causing a “trouble
condition” at the alarm panel. Allows for periodic testing of the automatic
door release function.

7200 SERIES
electromechanical closer/holder
compliance standards
•
•
•
•

ANSI/BHMA A156.15 certified
UL / cUL listed for use on fire rated doors
UL10C listed for positive pressure fire test
This product is manufactured in an ISO 9001 facility

HOW TO ORDER

MPDO

x Hand

x Voltage

x Finish

120VAC
24VDC
7200 Series
Closer/Holder

Closer Size
Slide Arm & Track
Maximum
and Connected
Door Size
Free Swing Arm
“3” 40"
“4” 44"
“5” 48"

RH - Right Hand
LH - Left Hand
Suffix:
Selective Hold Open
MPDO - Master Unit
MPSO - Slave/Support (24VDC only
when used with Master Unit)

Overhead Concealed
“4” 32"
“5” 38
“6” 48"

Executive™ Door Release
RFS - Selective Hold Open
D - Drop Application
(7220, 7230 only)

Double Lever Arm
“3” 42"
“4” 48"

FINISHES
Product will be sprayed with
a combination of waterborne
acrylic and polyester powder
coat.

Specifies side of door unit is mounted
on and the type of arm
Pull Side
“1” - Rigid Slide Arm & Track

Maximum reveal 1/8" (3mm)
“4” Connected Free Swing Slide Arm & Track

Maximum reveal 1/8" (3mm)
“5” - Double Egress Slide Arm & Track
Reveals 1/8"-3" (3-76mm) to 110°
“9” - Overhead Concealed Door Closer with
Rigid Slide Arm & Track
Push Side
“2” - Double Lever Arm
Reveals 2-3/4"-4" (70-120mm) to 180°
Reveals 4"-7" (102-179mm) to 165°
“3” - Double Lever Arm
Reveals 4"-7" (102-179mm) to 180°

Description

Specify Designation
(BHMA)

Complements the
following finishes

Old Designation

Aluminum

689

Statuary Bronze

690

628, 625, 629, 630, 651,
652
640, 613

Dull Bronze

691

612, 637, 639

Black

693

315

Medium Amber

694

312

Gold

696

605, 606, 632, 633

Prime Coat*

600

AL
STAT
DB

SRI

*600 is a special rust-inhibiting prime coat. Closers can be ordered prime coat only
(specify closer x 600). An additional charge applies if finish coat is required over
prime coat (ex: 7214MPDO x 600 x 689).

7200 SERIES
electromechanical closer/holder
MASTER UNITS

7210/7250
•
•
•
•

Surface mounted to the pull (hinge) side frame face
Slide track mounts directly to door
Minimum 4" ceiling clearance required
1/8" (3mm) – standard frame reveal. For deeper reveals, a special slide
arm is required (see chart on page 7).
• Handed
• Standard units accommodate doors opening 180°; maximum 175° hold open
• Buffer block assembly in the track will accommodate doors opening to 125°
• Auxiliary door stop is required for doors opening beyond 125°
• Units shipped Selective Hold Open; Infinite Hold Open can be set in the field.
• Fail Safe – solenoid will de-energize in the event of power failure
• Accommodates either concealed or surface wiring

7210MPDO Shown

Single Doors:
• Master Units with Integral Smoke Detector:
Both Series 7210MPDO or 7250MPDO are self-contained and can be installed to control a single door.
• Executive™ Door Holder/Release:
Both Series 7210RFS or 7250RFS are self-contained and can be installed to control a single door.
Pair of Doors:
• Master Unit x Slave/Support Unit: Smoke Detector in the Master Unit controls the Closer/Holder solenoid in both the Master Unit and
the Slave/Support Unit.

MASTER UNITS

26-11/16
(678)
4
(102)

2
(51)

25-1/16
(637)

2-11/16
(68)

4
102

7200 SERIES
electromechanical closer/holder
door size

Model Number

Maximum
Door Size

Standard Reveal
(to 1/8" (3mm) reveal)

Deep Reveal
(see note below)

40" (102cm)

7213MPDO

7253MPDO

44" (112cm)

7214MPDO

7254MPDO

48" (122cm)

7215MPDO

7255MPDO

Minimum door size = 28" (71cm)
Note: Deep Reveals
• Special slide arm is available for reveals in excess of 1/8" (3mm) up to 3" (76mm) 7250MPDO series
• 110° maximum door swing
Contact factory if door weight exceeds 250 lbs.

ELECTRICAL DATA
Master Units

Model
Number

7210
7250

Suffix

Operating
Voltage
(Input)

Amperage Draw

No.
Power
Input
Lines*
(Pairs)

Smoke Detector

24VDC
MPDO

1
120VAC

Standby

Alarm

.016@
24VDC

.035@
24VDC

Solenoid
Coil

.070@
24VDC

(Can be) Used
with Slave Unit

7210MPSO-24
7250MPSO-24

Executive™ Door Holder Release
Model
Number

7210RFS

Operating
Voltage
(Input)

No. Power
Input Lines*
(Pairs)

120VAC
24VDC

Amperage Draw
Solenoid Coil
.070@
24VDC

*Max/Min Operating Voltage Parameters +10% / -15%

7200 SERIES
electromechanical closer/holder
SLAVE/SUPPORT units
7210/7250
•
•
•
•

Surface mounted to the pull (hinge) side frame face
Slide track mounts directly to door
Minimum 4" ceiling clearance required
1/8" (3mm) – standard frame reveal. For deeper reveals, a special slide arm
is required (see below).
• Handed
• Standard units accommodate doors opening 180°; maximum 175° hold open
• Buffer block assembly in the track will accommodate doors opening to 125°
• Auxiliary door stop is required for doors opening beyond 125°
• Units shipped Selective Hold Open; Infinite Hold Open can be set in the field.
• Fail Safe – solenoid will de-energize in the event of power failure
• Accommodates either concealed or surface wiring

7210MPSO Shown

Pairs of Doors:
• Master Unit x Slave/Support Unit: Smoke Detector in the Master Unit controls the Closer/Holder solenoid in both the Master Unit and
the Slave/Support Unit.

TECHNICAL DETAILS
2-11/16
(68)

26-11/16
(678)
4
(102)

2
(51)

4
(102)

25-1/16
(637)

Model Number

Maximum
Door Size
(cm)

Standard Reveal
(to 1/8" (3mm) reveal)

Deep Reveal
(see note)

40" (102)

7213MPSO

7253MPSO

44" (112)

7214MPSO

7254MPSO

48" (122)

7215MPSO

7255MPSO

Note:

Deep Reveals
• Special slide arm is available for reveals in excess of 1/8"
(3mm) up to 3" (76mm), 7250MPSO series
• 110° maximum door swing

Contact factory if door weight exceeds 250 lbs.

ELECTRICAL DATA

Series Number

Suffix

7210
7250

Operating
Voltage (Input)

No. Power Input Lines*
(Pairs)

24VDC (only)
MPSO

24VDC supplied from
Master Unit

*Max/Min Operating Voltage Parameters +10% / -15%

Amperage Draw
Solenoid Coil
.070@
24VDC

(Can be) Used with
Master Unit
7210MPDO-24
7250MPDO-24
7210MPDO-120
7250MPDO-120

7200 SERIES
electromechanical closer/holder
master units

7220/7230
•
•
•
•
•
•
•
•

Surface mounted to the push (stop) frame face
Double lever arm mounts directly to the door
Minimum 4" (102mm) ceiling clearance required
Handed
Standard units accommodate doors opening 180°; maximum 175° hold open
Units shipped Selective Hold Open; Infinite Hold Open can be set in the field.
Fail Safe – solenoid will de-energize in the event of power failure
Accommodates either concealed or surface wiring

7220MPDO Shown

Single Doors:
• Master Units with Integral Smoke Detector:
Both Series 7220MPDO, 7230MPDO are self-contained and can be installed to control a single door.
• Executive™ Door Holder/Release:
Both Series 7220RFS, 7230RFS are self-contained and can be installed to control a single door.
Pairs of Doors:
• Master Unit x Slave/Support Unit: Smoke Detector in the Master Unit controls the Closer/Holder in both the Master Unit and the
Slave/Support Unit.

TECHNICAL DETAILS

26-11/16
(677)
2-11/16"
(68)

2"
(50)

3-1/2
(89)
Min

2"
(50)
Reveal

Note: For applications with narrow top rails or limited ceiling clearance, a special drop angle bracket is required. See page 15.

7200 SERIES
electromechanical closer/holder
door size

Model Number

Maximum
Door Size
(cm)

Closer/Holder

7223MPDO

Executive™
Door/Release

Maximum
Degree of
Opening

Reveal Range
(Inches/mm)

180°

2-3/4" - 4"
(70 - 102)

7223RFS

42" (107)

165°
7233MPDO

7233RFS

4" - 7"
(102 - 178)

180°

2-3/4" - 4"
(70 - 102)

180°
7224MPDO

7224RFS

48" (122)

165°
7234MPDO

7234RFS

4" - 7"
(102-178)

180°

Note: Contact factory if door weight exceeds 250 lbs.

ELECTRICAL DATA

Master Units
Amperage Draw
Series
Number

7220
7230

Suffix

Operating
Voltage (Input)

No. Power Input
Lines* (Pairs)

24VDC
MPDO

1
120VAC

Smoke Detector
Standby

Alarm

.016@
24VDC

.035@
24VDC

Executive™ Door Holder Release
Series
Number

7220RFS
7230RFS

Operating Volage
(Input)

No. Power Input
Lines* (Pairs)

120VAC
1
24VDC

*Max/Min Operating Voltage Parameters +10%/-15%

Amperage Draw
Solenoid Coil

.070@
24VDC

Solenoid
Coil

(Can be) Used
with Master
Unit

.070@
24VDC

7220MPSO
7230MPSO

7200 SERIES
electromechanical closer/holder
SLAVE/SUPPORT units
7220/7230
•
•
•
•
•
•
•
•

7220MPSO Shown
Pairs of Doors:
• Master Unit x Slave/Support Unit: Smoke Detector in the Master Unit controls the Closer/Holder in both the Master Unit
and the Slave/Support Unit.

TECHNICAL DETAILS
25-5/8
(651)

2-5/8
(67)

2
(51)
4
(102)

3-1/2
(89)
Min

2-1/8
(54)
Reveal

Note: For applications with narrow top rails or limited ceiling clearance, a special drop angle bracket is required. See page 15.

DOOR SIZE
Maximum
Door Size
(cm)

Model Number
7223MPSO

42"
(107)

Reveal Range
(Inches/mm)

180°

2-3/4" - 4"
(70-102)

165°

7233MPSO

4"-7"
(102-178)

180°

2-3/4" - 4"
(70-102)

180°

7224MPSO

48"
(122)

Maximum Degree
of Opening

165°

7234MPSO

4"-7"
(102-178)

180°

Note: Contact factory if door weight exceeds 250 lbs.

ELECTRICAL DATA
Model
Number
7220
7230

Suffix

Operating Voltage
(Input)

No. Power Input
Lines* (Pairs)

24VDC (only)
MPSO

24VDC Supplied from
Master Unit

Amperage Draw
Solenoid Coil
.070@
24VDC

(Can be) Used with
Master Unit
7220MPDO-24
7230MPDO-24
7220MPDO-120
7230MPDO-120

*Max/Min Operating Voltage Parameters +10%/-15%

7200 SERIES
electromechanical closer/holder
7240 CONNECTED FREE SWING ARM

As the door is opened,
the rigid slide arm
rotates the arm driver
and the pinion shaft of
the closer mechanism.

Door free
swing

The connected free swing arm assembly provides the convenient automatic closing fire door
protection for health care facilities or other locations where it is desired to neutralize the effort
required to open or close a door. With no spring force on the door during the normal operation,
patients, the handicapped and/or staff find the door easy to open, close or leave ajar.
Functions:
• Arm driver connected to the closer pinion drives the pinion when the door is opened and the
slide arm rotates.
• When unit is energized the pinion and arm driver remain at the point where door was initially
opened.
• Arm is connected to the pinion but is free to pivot.
• The door is free to open, close or be set at any degree of opening.
• When there is a Fire/Smoke alarm or any power interruption, the hold open control valve is
released, and door closes.
• Units shipped Selective Hold Open; Infinite Hold Open can be set in the field.

When the door has been opened
and released, the unit’s electrically
controlled plunger valve will hold
the pinion shaft and arm driver
at that degree of door opening.
The door is then free to swing
unhindered.

Door close

UL Listed:
7200 Series with Connected Free Swing arm is UL listed as a releasing device for Fire/Smoke
Barrier doors.

Model Numbers

Maximum
Door Size
(cm)

Master

40" (102)

7243MPDO

7243MPSO

7243RFS

44" (112)

7244MPDO

7244MPSO

7244RFS

48" (122)

7245MPDO

7245MPSO

7245RFS

Slave/Support

Executive™ Door Release

Selective Hold Open

Specify voltage and hand of door when ordering
Note: Contact factory if door weight exceeds 250 lbs.

After Fire/Smoke detection alarm or
any power interruption to the control,
the pinion shaft and arm driver are
released to close the door.

7200 SERIES
electromechanical closer/holder
7290 OVERHEAD CONCEALED SUPPORT UNIT

Controlled Remotely by Area/Ceiling Detectors
• Handed
• Unit concealed in the header of
the frame
• Installation requires a 4" (102mm) high
frame header
• A 2" x 4" (51 x 102mm) dust/grout
box and a removable frame stop
(provided by the door and frame supplier) are required.
• Slide track is mortised in the door’s top rail
• Standard units accommodate doors opening 180°; maximum 175° hold open
• Buffer block assembly in the track will accommodate doors opening to 125°
• Auxiliary door stop is required for doors opening beyond 125°
• Units shipped Selective Hold Open; Infinite Hold Open can be set in the field.
• Intended for use with compatible UL listed ceiling alarm detection equipment.
• Fail Safe – solenoid will de-energize in the event of power failure

TECHNICAL DETAILS

DOOR SIZE
Maximum Door Size (cm)

Selective Hold Open

32" (81)

7294MPS

38" (97)

7295MPS

48" (122)

7296MPS

Note: Contact factory if door weight exceeds 250 lbs.

ELECTRICAL DATA
Support Unit
Model Number

Suffix

Number power
Input Lines* (pairs)

7290

MPS

Operating
Voltage (input)

Amperage Draw Solenoid Coil (ampreses)

24VAC/DC

.070@24VAC/DC

120VAC

.035@120VAC

* Max/Min Operating Voltage Parameters +10%/-15%

7200 SERIES
electromechanical closer/holder
closer bodies

Description

Mounting

Voltage

Closer/Holder Assembly

Push or Pull

24VDC

Hand

Part Number

Left

720XLAPS24L

Right

720XLAPS24R

ARM & TRACK ASSEMBLIES

Description

For Series

Part Number

Slide Track

7210, 7240, 7250

7100-IT

Slide Arm

7210

7110-1A

Connected Free Swing Arm

7240

7140-1A

Double Egress Arm - Right Hand
Double Egress Arm - Left Hand

7250

7150-1R
7150-1L

Double Lever Arm

7220

7701-1A

Double Lever Arm

7230

7701-1B

Arm Assembly NHO - Right Hand
Arm Assembly NHO - Left Hand
Track Assembly NHO

7950-1R
7290

7950-1L
7950ST

7200 SERIES
electromechanical closer/holder
track & arm parts

Description

Part Number

Cushion Block (part of slide track assembly)

7100CB

Screw Pack for CFS Arm

7240SP

MISCELLANEOUS PARTS
Description

Part Number

Smoke Detector Board

MPDOSD24

Cover (Slave/Support Unit)

MPSOCOV

Cover (Master Units)

MPDOCOV

Selective Hold Open Switch Assembly 24V

SHOK

Switch 24V

SHO
1-1/2"
(38)
1-1/2"
(38)

Description
Drop Angle Bracket

Part Number

A
(Length)

7100DAB

29-9/16" (675)

7100DAB-180

24-9/16" (621)

7200 SERIES
electromechanical closer/holder

contact us at:
Norton Door Controls
3000 Highway 74 East
Monroe, NC 28112
Tel: 877-974-2255
Fax: 800-338-0965
ASSA ABLOY Door Security Solutions Canada
160 Four Valley Drive
Vaughan, Ontario, L4K 4T9 Canada
Tel: 800-461-3007
Fax: 905-738-2478
For a complete listing of products and
applications please visit our web site.
www.nortondoorcontrols.com
www.assaabloy.ca
Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Executive™ is a trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand
names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current
at time of publication. Copyright © 2005-2016, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security
Inc. is prohibited.

43063-1/16R

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Create Date                     : 2016:02:15 13:37:27-05:00
Metadata Date                   : 2016:02:15 13:39:57-05:00
Modify Date                     : 2016:02:15 13:39:57-05:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 7581 bytes, use -b option to extract), (Binary data 8861 bytes, use -b option to extract)
Instance ID                     : uuid:a3792ce1-66a7-8142-9bff-52a22e816e76
Document ID                     : xmp.did:FA7F1174072068118DBBBAC4441E04A8
Original Document ID            : xmp.did:FA7F1174072068118DBBBAC4441E04A8
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:FA7F1174072068118DBBBAC4441E04A8, xmp.iid:FC7F1174072068118DBBBAC4441E04A8, xmp.iid:FD7F1174072068118DBBBAC4441E04A8, xmp.iid:FE7F1174072068118DBBBAC4441E04A8, xmp.iid:FF7F1174072068118DBBBAC4441E04A8, xmp.iid:00801174072068118DBBBAC4441E04A8, xmp.iid:96B1A56A1E2068118DBBBAC4441E04A8, xmp.iid:97B1A56A1E2068118DBBBAC4441E04A8, xmp.iid:98B1A56A1E2068118DBBBAC4441E04A8, xmp.iid:99B1A56A1E2068118DBBBAC4441E04A8, xmp.iid:9AB1A56A1E2068118DBBBAC4441E04A8, xmp.iid:9BB1A56A1E2068118DBBBAC4441E04A8, xmp.iid:9CB1A56A1E2068118DBBBAC4441E04A8, xmp.iid:9DB1A56A1E2068118DBBBAC4441E04A8, xmp.iid:9EB1A56A1E2068118DBBBAC4441E04A8, xmp.iid:9FB1A56A1E2068118DBBBAC4441E04A8, xmp.iid:A0B1A56A1E2068118DBBBAC4441E04A8, xmp.iid:A4EC6B4A2F2068118DBBBAC4441E04A8, xmp.iid:018011740720681192B0A18F26EB4747, xmp.iid:038011740720681192B0A18F26EB4747, xmp.iid:048011740720681192B0A18F26EB4747, xmp.iid:058011740720681192B0A18F26EB4747, xmp.iid:068011740720681192B0A18F26EB4747, xmp.iid:078011740720681192B0A18F26EB4747, xmp.iid:098011740720681192B0A18F26EB4747, xmp.iid:0A8011740720681192B0A18F26EB4747, xmp.iid:6AD74A701F20681192B0A18F26EB4747, xmp.iid:6BD74A701F20681192B0A18F26EB4747, xmp.iid:6CD74A701F20681192B0A18F26EB4747, xmp.iid:6DD74A701F20681192B0A18F26EB4747, xmp.iid:6ED74A701F20681192B0A18F26EB4747, xmp.iid:6FD74A701F20681192B0A18F26EB4747, xmp.iid:70D74A701F20681192B0A18F26EB4747, xmp.iid:97222064BA2068118C149E056528E6E0, xmp.iid:98222064BA2068118C149E056528E6E0, xmp.iid:FB792BB3BD2068118C149E056528E6E0, xmp.iid:D01B99D7C02068118C149E056528E6E0, xmp.iid:165E4EDEC62068118C149E056528E6E0, xmp.iid:90C7C46CE22068118C149E056528E6E0, xmp.iid:35A749022F20681180838FE812DD0501, xmp.iid:1341AFFA0B20681188C6A8226285759E, xmp.iid:3EF5937DEB2068118A6DE62272C97358, xmp.iid:D9DD2182402068118A6DA9AFB8289475, xmp.iid:325FE2F5562068118A6DA9AFB8289475, xmp.iid:6F07353B462068118C14DD14234C9C2B, xmp.iid:7A6906B8562068118C14DD14234C9C2B, xmp.iid:0E672F9E9C20681188C6D5FD8025C76D, xmp.iid:F80911E9792068118A6DD2256E5173B8, xmp.iid:08C7C0AE0E2168118A6DD2256E5173B8, xmp.iid:C936EB221F206811A200EE862E11A016, xmp.iid:17A0103220206811A200EE862E11A016, xmp.iid:B0897C8BB12068118C14BB143643B94E, xmp.iid:BB3EC5A79B20681188C6A780B7F8AAD8, xmp.iid:9D2B90BDA920681192B0A187175340D0, xmp.iid:2EEC4E55852068118083DB1CE0E83143, xmp.iid:BD9A211A9D2068118083DB1CE0E83143, xmp.iid:B0CE06A8A22168118083A672C8F81549, xmp.iid:A503BB22932568118083ED6C1AEB07C4, xmp.iid:D34B5A30AF2568118083ED6C1AEB07C4
History When                    : 2012:08:22 10:41:41-04:00, 2012:08:22 10:47:53-04:00, 2012:08:22 10:47:53-04:00, 2012:08:22 12:07:31-04:00, 2012:08:22 12:08:06-04:00, 2012:08:22 12:09:24-04:00, 2012:08:22 12:12:39-04:00, 2012:08:22 12:47:03-04:00, 2012:08:22 12:50:49-04:00, 2012:08:22 12:56:13-04:00, 2012:08:22 13:44:29-04:00, 2012:08:22 13:50:17-04:00, 2012:08:22 13:51:54-04:00, 2012:08:22 14:00:21-04:00, 2012:08:22 14:04:48-04:00, 2012:08:22 14:06:57-04:00, 2012:08:22 14:12:50-04:00, 2012:08:22 14:13:24-04:00, 2012:08:29 10:01:10-04:00, 2012:08:29 12:26:42-04:00, 2012:08:29 12:27:49-04:00, 2012:08:29 12:30:48-04:00, 2012:08:29 12:48:08-04:00, 2012:08:29 12:58:41-04:00, 2012:08:29 13:08:34-04:00, 2012:08:29 13:09:01-04:00, 2012:08:29 13:09:34-04:00, 2012:08:29 13:31:40-04:00, 2012:08:29 13:33:03-04:00, 2012:08:29 13:37:31-04:00, 2012:08:29 13:37:50-04:00, 2012:08:29 13:39:28-04:00, 2012:08:29 13:42:40-04:00, 2012:08:29 16:34:37-04:00, 2012:08:29 16:34:37-04:00, 2012:08:29 16:58:18-04:00, 2012:08:29 17:20:47-04:00, 2012:08:29 18:03:56-04:00, 2012:08:30 12:37:07-04:00, 2012:09:06 11:02:03-04:00, 2012:09:06 15:01:32-04:00, 2012:09:16 08:56:12-04:00, 2012:09:17 14:16:54-04:00, 2012:09:17 16:57:35-04:00, 2012:09:18 18:16-04:00, 2012:09:19 11:02:52-04:00, 2012:11:16 13:52:31-05:00, 2012:12:18 16:24:49-05:00, 2012:12:20 15:15:54-05:00, 2013:02:22 16:31:25-05:00, 2013:02:22 16:39-05:00, 2013:05:01 16:20:56-04:00, 2013:05:25 08:48:48-04:00, 2015:05:13 11:32:41-04:00, 2015:07:01 10:35:22-04:00, 2015:07:01 13:25:30-04:00, 2015:08:24 13:43:39-04:00, 2016:01:07 10:18:44-05:00, 2016:01:07 13:39:32-05:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Doc Change Count                : 1979
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 16
Creator                         : Adobe InDesign CS5 (7.0)

EXIF Metadata provided by EXIF.tools

Norton 7200 Electromechanical Closer 43063

Navigation menu

Versions of this User Manual:

Views

Navigation