Novatel Wireless NRM-3800 CDPD Data Transceiver User Manual Revised Manual Page 13

Download:
Mirror Download [FCC.gov]
Document ID	94854
Application ID	fDLBXsQlFfJgMNd5AupNUw==
Document Description	Revised Manual Page 13
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.23kB (40396 bits)
Date Submitted	2000-04-06 00:00:00
Date Available	2000-04-17 00:00:00
Creation Date	2000-04-06 13:09:34
Producing Software	Acrobat PDFWriter 4.05 for Windows NT
Document Lastmod	2000-04-06 13:10:07
Document Title	Revised Manual Page 13
Document Creator	Adobe Acrobat PDF Link - 32
Document Author:	Celia

5 Antenna Installation
When choosing an antenna for your modem installation you should select one that meets the following
specifications:
0 Cellular frequency band
- TNC connector
0 50 ohm cable
- 2.0 dBi (+/- 0.5 dB)
Note: in order to meet the FCC‘s requirements for Minimum Permissible Exposure (MPE) the antenna
must be mounted such that no persons may come within 30 cm (1 ft) of the antenna while radiating
Please follow these recommendations when installing your antenna:
. Install the antenna only according to its manufacturer instructions.
- Connect the antenna‘s TNC connector to the modem's Antenna connector.
- Only mount the antenna where designed to be mounted.
0 Do not install a glass mount antenna on metallic glass or with the antenna conductor placed over the
rear window heating wires.
0 Do not mount a roof mount antenna on a fiberglass or plastic surface.
Care should be taken when choosing the location on the vehicle for the antenna installation:
- Select the highest possible point on the vehicle to install the antenna.
. Select a location that has easy access to a cable run to simplify connecting the antenna to the
modern.
. Select a cable run that is free of hazards such as excessive heat, possible screw punctures or that
requires pinching of the cable when installing it.
. Select a cable run that allows the cable to remain fixed in place. A cable that has to move in
hoods/doors or other moveable locations on the vehicle will eventually fray and break.
0 Select a cable route that is at least 8 inches (20.3 centimeters) away from any microprocessor
controlled electronic equipment,
51 Checklng Your Modem Connections
After installing the Power cable (and checking the voltages) and installing and connecting the antenna
turn on the ignition again. Four LEDs should turn on briefly. then the SVC LED will continue to blink.
Other LEDs may also blink.
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : Adobe Acrobat PDF Link - 32
Create Date                     : 2000:04:06 13:09:34
Author                          : Celia
Producer                        : Acrobat PDFWriter 4.05 for Windows NT
Modify Date                     : 2000:04:06 13:10:07-07:00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools