Novatel Wireless NRM6834 MINSTREL S Wireless CDPD modem User Manual

Novatel Wireless, Inc. MINSTREL S Wireless CDPD modem S

a href="https://usermanual.wiki/Novatel-Wireless" itemprop="url"> Novatel Wireless >

EX9 MANUAL

August 2000 APREL Project No.: NVWB-MINSTREL S    Consulting * Research * Training * Certification Testing  Since 1981Exhibit 9Minstrel  SNovatel Wireless Technologies Ltd.FCC ID:  NBZNRM6834User’s Manual
www.novatelwireless.comToll Free: 1-888-888-9231As shown below, your Minstrel STM can be ready to download web pages and send and receive email in just a few steps.  For more detailed information on setting up your Minstrel S, read the Getting Started section of the Minstrel S User Guide.Insert the Minstrel S into the SpringboardTM expansion slot of your VisorTM.Remove the slot protector and insert the Minstrel S into the slot until the connectors are secure.  The Modem Manager software, which controls the modem’s connection to the Wireless IP network, will automatically launch.Start the Setup Wizard utility to begin configuration of the Minstrel S.Once the Minstrel screen appears, tap the Menu icon and select Setup Wizard from the Minstrel menu. Follow the directions on the screen to configure the Minstrel S.As directed, select the Wireless IP network provider you wish to use and contact the provider to set up an account.  When prompted, enter the IP and DNS addresses and test the network registration.Install email and web browsing applications on your Visor.Install any email and web browsing applications you would like to use on your Visor following the directions provided by the software manufacturer.Charge the Minstrel S battery.The Minstrel S is shipped with a partially charged battery and, therefore, it is necessary to charge the battery before the modem is used.  The battery status LED on the front of the Minstrel S flashes green when the battery is being charged and is solid green when the battery is fully charged.  Connect to the Wireless IP network.Once your Minstrel S has been configured, you can connect to the Wireless IP network simply by inserting your Minstrel S into the Visor’s expansion slot.  The Modem Manager software will automatically launch and register the modem to the network.  Congratulations!Now that your Minstrel S has registered to the Wireless IP network, you can send and receive data across the Internet using your Visor and just about any email or web browsing application you choose.  Quick Start GuideAs shown below, your Minstrel STM can be ready to download web pages and send and receive email in just a few steps.  For more detailed information on setting up your Minstrel S, read the Getting Started section of the Minstrel S User Guide.Insert the Minstrel S into the SpringboardTM expansion slot of your VisorTM.Remove the slot protector and insert the Minstrel S into the slot until the connectors are secure.  The Modem Manager software, which controls the modem’s connection to the Wireless IP network, will automatically launch.Start the Setup Wizard utility to begin configuration of the Minstrel S.Once the Minstrel screen appears, tap the Menu icon and select Setup Wizard from the Minstrel menu. Follow the directions on the screen to configure the Minstrel S.As directed, select the Wireless IP network provider you wish to use and contact the provider to set up an account.  When prompted, enter the IP and DNS addresses and test the network registration.Install email and web browsing applications on your Visor.Install any email and web browsing applications you would like to use on your Visor following the directions provided by the software manufacturer.Charge the Minstrel S battery.The Minstrel S is shipped with a partially charged battery and, therefore, it is necessary to charge the battery before the modem is used.  The battery status LED on the front of the Minstrel S flashes green when the battery is being charged and is solid green when the battery is fully charged.  Connect to the Wireless IP network.Once your Minstrel S has been configured, you can connect to the Wireless IP network simply by inserting your Minstrel S into the Visor’s expansion slot.  The Modem Manager software will automatically launch and register the modem to the network.  Congratulations!Now that your Minstrel S has registered to the Wireless IP network, you can send and receive data across the Internet using your Visor and just about any email or web browsing application you choose.  Quick Start Guidewww.novatelwireless.comToll Free: 1-888-888-9231QSG-90023060 Version BVersion BQSG-90023060
Download:
Mirror Download [FCC.gov]
Document ID114495
Application ID50wYyJSUUoMBUJ8yrtHq6A==
Document DescriptionEX9 MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize57.44kB (718056 bits)
Date Submitted2000-08-24 00:00:00
Date Available2000-10-12 00:00:00
Creation Date2000-08-21 16:03:18
Producing SoftwareAcrobat PDFWriter 4.0 for Windows
Document Lastmod2000-08-22 11:58:13
Document TitleS.PDF
Document CreatorMicrosoft Word
Document Author: ArtB
FCC ID Filing: NBZNRM6834

Navigation menu