Novatel Wireless NRMR900 Merlin for Ricochet Wireless Modem User Manual user warning

Novatel Wireless, Inc. Merlin for Ricochet Wireless Modem user warning

User Manual demonstrating compliance statements

Download: Novatel Wireless NRMR900 Merlin for Ricochet Wireless Modem User Manual user warning
Mirror Download [FCC.gov]Novatel Wireless NRMR900 Merlin for Ricochet Wireless Modem User Manual user warning
Document ID116409
Application IDfl4AtSGuCbDkLJuf6yufXQ==
Document DescriptionUser Manual demonstrating compliance statements
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize10.99kB (137409 bits)
Date Submitted2000-09-08 00:00:00
Date Available2000-10-02 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareAcrobat PDFWriter 3.02 for Windows
Document Lastmod0000-00-00 00:00:00
Document Titleuser_warning.pdf
Document CreatorMicrosoft Word
Document Author: Unknown

Ricochet GT Wireless Modem
Model NRM-R900
Merlin for Ricochet Wireless Modem Model NRM-R900
Safety and Regulatory Notices
SAFETY WARNING
This product is not to be used in any environment where radio frequency equipment is prohibited or restricted in its use.
This includes aircraft/airports, hospitals, and other sensitive electronic areas. To ensure that your modem is deactivated
you should remove it from your computer under the above conditions.
SAFETY WARNING
Under extended operation the Merlin for Ricochet modem will generate a noticeable amount of heat. Like all PC Cards, the
modem generates heat during normal operations and is also heated by the host computer. For this reason it is
recommended that you allow the modem to cool down after extensive operation so that it is cool to the touch when you
remove it from your computer.
REGULATORY NOTICES
Federal Communications Commission Radio Frequency Interference Statement
This equipment has been certified to comply within the limits of a class B digital device pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in residential situations. This
equipment generates, uses, and can radiate radio frequency energy, and, if not properly installed and used in accordance
with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning
the equipment on and off. You are encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna of the television, radio or cordless telephone.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for additional suggestions.
ICES-003 Statement
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.
Caution:
This device is required to comply with FCC RF exposure requirements
for mobile transmitting devices. A separation distance of 20 cm (8
inches) or more must be maintained between the antenna and all
persons during device operations to satisfy RF exposure compliance.
FCC ID: NBZ-NRM R900
Merlin for Ricochet Modem Manager Application
Welcome
This help file contains information on the Merlin for Ricochet Modem Manager application. Please take a moment to read
through this Help file to acquaint yourself with the Modem Manager application’s features.
Features of the Merlin for Ricochet Modem Manager
Application
The Merlin for Ricochet Modem Manager application provides you with a graphical view of your Merlin modem’s
connection status with the Ricochet network. Modem Manager gives information on the following:
•
•
Found Network—tells if the modem was unable to find a network connection or if at least
one network connection was found.
•
•
Registered on Network—tells if the modem actually registered to the network.
•
•
Connected to Network—indicates if a data session is active.
•
•
Antenna Strength—indicates relative antenna signal strength with an active, multi-colored
bar graph.
Status application can also be used to obtain additional information about the Metricom modem. See About Status
Application for additional information.
Starting Modem Manager
Once the Merlin PCMCIA card and the Setup program with Modem Manager have been installed, the Modem Manager
window will launch.
A blue Question mark indicates that the modem is attempting to complete the related task. In the following example, the
modem is querying the system for information. The Status bar at the bottom of the window indicates that modem
initialization is taking place.
A red X indicates that the related task could not be completed. In the following example, the modem has not been able to
find, register, or connect to the network. The Status bar at the bottom of the window indicates that the modem is attempting
to find a network.
A green Checkmark indicates that the related task has been completed. In the following example, the modem has found,
registered and connected to the network.
The active Antenna Strength bar graph indicates that the antenna signal strength is good. The Status bar at the bottom of
the window indicates that the modem is now connected to the network via dial-up networking.
Modem Manager Windows
Use the File, Device and Help menus from the Modem Manager window to control the operation of the modem and to
obtain additional modem information.
File
Always On Top
To make the Modem Manager window always visible, click File, and then select Always On Top.
Shutdown
To disconnect the service, click File, and then select Shutdown.
The Modem Manager application will disconnect and the Modem Manager window will close.
Close
To close the Modem Manager window without disconnecting the application, click File, and then select Close.
The window will then minimize to the tray icon.
To obtain information about the modem, click Device and select Modem Information.
The Modem Information window will be displayed.
To see the Modem Manager application Help Table of Contents and Index, click Contents and Index.
Tray Icons
When the Merlin for Ricochet Modem Manager has been loaded, one of the following icons will show in the system icon
tray.
Modem not ready for use (unregistered)
Modem ready for use (registered)
Modem transmitting or receiving data (flashing icon)
Right click on these tray icons to open the application window or to completely shut down the application.
1.
To open the Modem Manager window, click Open.
2.
To shut down the application, click Shutdown.
About the Modem Manager Application
To obtain additional information about the Merlin for Ricochet Modem Manager application, click the Help menu, and then
select About Modem Manager…
The About Merlin Ricochet Status Information window will open, indicating the version number of the Modem
Manager application software.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 7
Creator                         : Microsoft Word
Create Date                     : Friday, September 08, 2000 3:23:30 PM
Title                           : user_warning.pdf
Author                          : Unknown
Producer                        : Acrobat PDFWriter 3.02 for Windows
Subject                         : User Document FCC Warning
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NBZNRMR900

Navigation menu