Novatel Wireless NRMUNDP-1D UNDP-1PCI EXPRESS MINI CARD User Manual XFR D630 Service Manual
Novatel Wireless, Inc. UNDP-1PCI EXPRESS MINI CARD XFR D630 Service Manual
Contents
User Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1111033 |
| Application ID | eMTpjdqJA8kTOsyssahwQw== |
| Document Description | User Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 95.1kB (1188770 bits) |
| Date Submitted | 2009-05-15 00:00:00 |
| Date Available | 2009-05-15 00:00:00 |
| Creation Date | 2009-01-08 21:16:53 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2009-01-08 21:17:19 |
| Document Title | XFR D630 Service Manual |
| Document Creator | Acrobat PDFMaker 8.1 for Word |
| Document Author: | Monica Melson |
Dell™ Latitude™ E6400 XFR Setup and Features Information WARNING: A WARNING indicates a potential for property damage, personal injury, or death. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. NOTE: A NOTE indicates important information that helps you make better use of your computer. Front View 28 27 26 25 24 23 22 10 11 21 12 13 20 14 19 December 2008 15 18 17 16 Dell™ Latitude™ E6400 XFR Setup and Features Information Microphone Camera light (optional) Display latch and release Camera (optional) DirectVue™ Outdoor-Readable Display (optional touchscreen) Keyboard status lights Volume control buttons Power button USB connectors (2) 10 Wi-Fi Catcher™ Network Locator 11 Wireless switch 12 Audio connectors (2) 13 Right speaker 14 SIM card reader 15 Media bay (with optical drive) 16 PC or PC-Express card slot (base dependent) 17 IEEE 1394a connector 18 Fingerprint reader (optional) 19 Contactless smart-card reader (see Smart Cards) 20 Secure Digital (SD) memory-card reader 21 Handle (with optional touchscreen stylus) 22 Touch pad buttons/Track stick buttons 23 Touch pad 24 Left speaker 25 Track stick (not available on sealed rubber keyboard) 26 Keyboard 27 Device status lights 28 Ambient light sensor Back View 13 12 11 10 PR-481™ Ultra-Performance Chassis Material RJ-11 modem connector RJ-45 network connector Battery access panel Page 2 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information Battery/power lights Multimode DisplayPort AC adapter Security cable slot Video connector 10 eSATA/USB connector 11 USB PowerShare connector 12 Hard Disk Drive 13 Smart-card reader (see Smart Cards) WARNING: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your Dell™ computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire. The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a problem with the fan or the computer. Bottom View QuadCool™ thermal management Battery access panel Sliding cover to docking device connector Battery latch release RF pass-through connectors (see RF Passthrough) Battery Removal CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The battery is designed to work with your Dell computer. Do not use a battery from other computers with your computer. CAUTION: Before removing or replacing the battery, turn off the computer, disconnect Page 3 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information the AC adapter from the electrical outlet and the computer, disconnect the modem from the wall connector and computer, and remove any other external cables from the computer. 1. Release the rear panel. a. Push the latch to the right, to its unlocked position. b. Then, press the latch down. 2. Lower the rear panel. 3. Press in the two battery release latches on the bottom of the computer. Page 4 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information 4. Use the tab on the edge of the battery to remove the battery from the computer. Battery Installation 1. 2. 3. Insert battery until you hear a click and a mechanical stop. Push the latch down and rotate the door into place. Ensure the door is in the fully closed position, raise the latch up and then push the latch to the left into the locked position. Hard Disk Drive Removal 1. Page 5 Open the hard disk drive door located on the left side panel by pushing the latch towards the rear of the computer, 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information and rotating the door down. 2. To remove the hard disk drive: a. While pressing in the release tab on the right side of the hard disk drive compartment, b. Use the tab on the edge of the hard disk drive to pull the hard disk drive from the compartment. Hard Drive Installation 1. 2. Insert hard drive until you hear a click and a mechanical stop. Rotate the door into place and press until it clicks into its closed position. Operation of the PrimoSeal™ Doors Page 6 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information Docking Device Connector Door The docking device connector door is opened by sliding the door towards the front of the computer until it clicks into its open position. Reverse this procedure to close the door. Press-Fit Door The press-fit door is opened by inserting a finger into the door slot and pulling the door away from the computer. To close the door, rotate it back into its closed position and press until it you hear it click into position. Latch Door The latch door is opened by sliding the latch towards the rear of the computer, and then rotating the door down. To close the door, rotate the door back into its closed position and press until you hear it click into position. Page 7 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information Slide Insert Door The slide insert door is opened by sliding the door to its open position until it clicks into position. Reverse the procedure to close the door. Quick Setup WARNING: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. WARNING: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage. CAUTION: When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly but gently to avoid damaging the cable. When you wrap the AC adapter cable, ensure that you follow the angle of the connector on the AC adapter to avoid damaging the cable. NOTE: Some devices may not be included if you did not order them. NOTE: It is recommended that you turn on and shut down your computer at least once before you install any cards or connect the computer to a docking device or other external device, such as a printer. 1. Page 8 Connect the AC adapter to the AC adapter connector on the computer and to the electrical outlet. 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information 2. Connect the network cable. 3. Connect USB devices, such as a mouse or keyboard. 4. Connect IEEE 1394 devices, such as a DVD player. 5. Open the computer display and press the power button to turn on the computer. Page 9 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information Smart Cards Smart (CAC) cards are laptop credit-card shaped devices with internal integrated circuits. Using smart cards can improve system security by combining something a user has (the smart card) with something only the user should know (a PIN) to provide more secure user-authentication than passwords alone. There are two main types of Smart Cards: • Contact Smart Cards — These cards have a contact area with many gold plated connection pads. When inserted into a card reader, the information from the chip can be read and written. • Contactless Smart Cards — These cards do not require any physical contact with the reader. The chip communicates with the card reader through RFID induction technology. These cards require only close proximity to an antenna of a card reader to complete transaction. GPS To be determined… RF Pass-Through In the event the XTG notebook has an integrated WiFi and/or Broadband radio, the RF signals can be passed through a docking station to external TNC antenna connectors (LAN/WAN). This supports the connection and use of external, vehicle-mounted antennas (purchased separately) for improved radio performance. DirectVue™ Touch Display Information If you purchased your E6400 XFR Fully Rugged Notebook with the optional DirectVue Touch Display please review the following user instructions and tips. The E6400 XFR provides an optional touch screen display for entering and selecting data using an approved pointing device such as your finger, a passive stylus or any non-abrasive smooth blunt object that will not damage the touch display. NOTICE: To ensure you properly care for and maintain your touch display, adhere to the care instructions regarding the display. Page 10 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information CAUTION: The optional DirectVueTM Touch Display has been designed to accept finger touch as well as passive stylus input directly onto the screen. With the optional DirectVueTM Touch Display, a stylus is included with the E6400 XFR for use in selecting items on the touch screen. Other pointing devices can be used with the touch screen such as any non-abrasive, smooth or blunt object that will not damage the touch screen display. The touch screen surface can be damaged by ink pens, marker pens or other pointed or abrasive objects. The use of non-approved input devices that cause damage to the digitizer or LCD may not be covered by the limited warranty. The touch screen is pre-configured and pre-calibrated at the factory, but may require further calibration to improve accuracy for entering or selecting data on the touch display. Please see the Tools section for information on Calibrating your E6400 XFR Touch Display and using your stylus. Accessing Drivers and Documentation Your E6400 XFR DirectVue Touch Display’s drivers, touch-input parameters and documentation have been pre-loaded at the factory. For experienced users or IT administrators - if you need to re-install drivers, set up your E6400 XFR Touch Display or modify parameters please refer to the pre-loaded E6400 XFR Touchkit Utility documentation for detailed instructions and refer to the summary provided in Touchkit Configuration Utility. You can launch the pre-loaded documentation by selecting Start -> Programs -> Touchkit -> Document. Touchkit Configuration Utility Your E6400 XFR DirectVue Touch Display system incorporates EETI technology. Touchkit is a software utility tool that allows you to configure various touch features. You can launch Touchkit by clicking Start -> Programs -> Touchkit -> Configure Utility. NOTE: The touch screen is pre-configured and pre-calibrated at the factory, but may require further calibration to improve accuracy for entering or selecting data on the touch display, or to further configure it to your specific application. Please refer to the pre-loaded documentation for the Touchkit Configuration Utility for a complete description of all its capabilities and functionality. You can launch the pre-loaded documentation for the Touchkit Configuration Utility by selecting Start -> Programs -> Touchkit -> Document -> User Guide for Windows 2000/XP -> Touchkit Utility. The Touchkit software utility consists of tabs that allow you to determine the best settings for your touch screen configuration. • • • • • • • The General tab shows all of the touchkit touch screen controllers installed in your system The Tools tab provides access to calibration and touch position tools. The Setting tab provides access to the configuration of beeps, clicks and mouse emulation as well as selection of 9 point or 25 point calibration for linearization. The Display tab provides the tools for mapping the touch screen area to specific areas of the display. The default is full screen. The Edge Parameters tab provides configuration for selecting items near the edge of the touch screen. The Hardware tab provides the model and firmware version of the Touchkit touch screen controller. The About tab provides the version of the Touchkit driver as well as providing a link for downloading the latest driver. Page 11 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information General The general property page shows all the Touchkit touch screen controllers installed including RS232, USB and PS2 interfaces. The E6400 XFR touch screen controller is a USB device. Tools The Tools property page provides the following information and functions which are selected by pressing the push buttons. NOTE: Your touch screen is configured and calibrated at the factory. However, if you notice that the calibration is not as precise as you would like, you can use the 4 Points Calibration and/or the Linearization tool to provide a more accurate alignment of the touch screen. • • • • • Graph of the Linearization Curve of the touch screen – for reference and troubleshooting purposes. See its usage in the discussion of the Linearization function. 4 Points Calibration – Calibration aligns the touch panel with the video screen. The touch screen must be calibrated to allow for positional accuracy of the stylus or finger touch inputs. Clear and Calibrate – Clears the calibration/linearization parameters and allows you to perform the 4 points calibration again. Linearization (9 or 25 points linearization is set within the Setting tab) – the linearization function provides for more precise mapping of the stylus or finger touch inputs. After linearization is completed, the linearity of the touch screen will be shown in the Linearization Curve window. Draw Test - used for accuracy and performance checking. Page 12 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information 1. 4 Points Calibration The touch screen must be calibrated before it can work accurately. This function pops up a new window to guide you through the 4 points calibration. You should follow the guide to touch and hold the blinking X symbol in the calibration window until it does not blink to make sure that the utility can gather enough data for computation. In addition, a time line bar is shown in the bottom of the window to indicate time elapsed. If the touch screen is not touched before the time line bar reaches the right end, the calibration task will be terminated automatically. 2. Linearization This function provides for more accurate touch screen positional alignment. The linearization function pops up a new window to guide you through the 9 or 25 points calibration. Configuring the function for 9 or 25 points calibration is accessed in the Setting tab. You should follow the guide to touch and hold the blinking X symbol in the calibration window until it does not blink to make sure that the utility can gather enough data for computation. In addition, a time line bar is shown in the bottom of the window to indicate the time elapsed. If the touch screen is not touched before the time line bar reaches the right end, the calibration task will be terminated automatically. Page 13 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information 3. Draw Test This function is used for accuracy and performance checking. You can use the stylus or finger touch to draw or write across the displayed area. You can press the Clear button to clear the window. Press the Quit button to terminate the draw test. Page 14 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information Setting The Setting property page provides the following buttons and check boxes: 1. Beep • Beep On Touch Check this check box to enable driver to generate a beep sound when touch touchscreen state is switched from untouched to touched state. • Beep On Release Check this check box to enable driver to generate a beep sound when touchecreen state is switched from touched state to untouch state. • Frequency Adjust this frequency to control the beep sound frequency generated by the driver. • Duration Adjust this duration to control the beep sound duration. 2. Linearization Style The Touchkit utility provides you with both 9 points and 25 points calibration for linearization. You can select the suitable kind of linearization type with this setting. The Linearization function is accessed under the Tools tab. 3. Double Click Time The double Click Time group is used to set system double click time. Changing this value will affect the double click behavior for all of the mice devices in the system. Two continuous clicks at the same area within this specified time period will be recognized as a double click event. 4. Double Click Area The double click area group is used to set the system double click area. Changing this value will affect the double click behavior for all of the mice devices in the system. Two continuous clicks within the specified area in the specified double click time will be recognized as a double click event. 5. Mouse Emulation mode There are 5 mouse emulation modes for the Touchkit touch screen controllers. Press on the button to change the emulation mode. • Normal Mode You can select this mode to select objects, and drag objects. • Click On Touch With this Click On Touch mode, the driver emulates a mouse click event when the touch Page 15 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information • • • screen state is switched from un-touched state to touched state. Then, the driver always generates a mouse move event and tracks the touch position until the touch screen state switches to the un-touch state. Click On Release With this Click On Release mode, the driver emulates a mouse click event when the touch screen state is switched from touched state to un-touched state. Click On Touch without moving cursor With this mode, the driver behaves similarly to the Click On Touch mode. The cursor does not move to the touch position except for the first touch point. Click On Release without moving cursor With this mode, the driver behaves similarly to the Click On Release mode. The cursor does not move to the touch position except for the lift-off point. 6. Option You can access advanced configuration functions with the Option button. Press the button, and the following window will appear. Display The Touchkit driver supports multiple monitor and display systems. To work with multiple monitor systems, you need to perform the proper configuration to map the touch screen working area to the correct system display area using the Display property page. Page 16 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information Edge Parameters For some special touch screen applications where the edge area of the full screen cannot be reached, Touchkit provides you with this edge compensation tool to solve the problem and allow for touching the edge area without accuracy loss. Hardware The Hardware property page shows the model and firmware version of the Touchkit controller. The software will query the hardware information from the controller and show the information as illustrated here. Page 17 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information About The About property page shows information regarding the Touchkit driver, including providing a link to allow you to download the latest driver. Page 18 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information Specifications NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start -> Help and Support and select the option to view information about your computer. Video NOTE: Your Dell™ computer has both integrated and discrete video options. Video type Integrated and discrete on system board, hardware accelerated Data bus Integrated video or PCI-Express video x16 Video controller Integrated video: Intel® Graphics Media Accelerator 4500 MHD Discrete video: nVIDIA Quadro NVS 160M Video memory: Integrated video: Up to 1 GB (with 2 GB or more system memory – Microsoft® Windows® XP) Up to 1.7 GB (with 4GB or more system memory – Windows Vista®) Discrete video: 256 MB dedicated memory Battery Type 12-cell “smart” lithium ion prismatic rugged slice (84 Whr) 6-cell “smart” lithium ion (56 Whr) 4-cell “smart” lithium ion (35 Whr) Dimensions: 4-cell and 6-cell lithium-ion batteries: Depth 206 mm (8.11 inches) Height 19.8 mm (0.78 inches) 12-cell lithium-ion rugged slice battery: Depth 14.48 mm (0.57 inches) Height 217.24 mm (8.55 inches) Weight: 4-cell primary battery 0.24 kg (0.53 lb) 6-cell primary battery 0.33 kg (0.73 lb) 12-cell slice battery 0.85 kg (1.87 lb) Voltage 4-cell battery 14.8 VDC 6-cell battery 11.1 VDC 12-cell rugged slice battery 14.8 VDC Temperature range: Page 19 Operating -290 to 600C (-200 to 1400F) Storage -510 to 710C (-600 to 1600F) 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information Coin-cell battery CR-2032 AC Adapter Input voltage 100-240 VAC Input current (maximum) 1.5 A Input frequency 50-60 Hz Temperature range: Operating Storage 00 to 350C (320 to 950F) -400 to 650 (-400 to 1490F) PA-12 65 W Travel AC adapter: Output voltage 19.5 V DC Output current 3.34 A Height 15 mm (0.6 inches) Width 66 mm (2.6 inches) Depth 127 mm (5.0 inches) Weight 0.29 kg (0.64 lb) PA-10 90 W D-Series AC adapter: Output voltage 19.5 V DC Output current 4.62 A Height 32 mm (1.3 inches) Width 60 mm (2.4 inches) Depth 140 mm (5.5 inches) Weight 0.425 kg (0.9 lb) PA-3E 90 E-Series AC adapter: Page 20 Output voltage 19.5 V DC Output current 4.62 A Height 15 mm (0.6 inches) Width 70 mm (2.8 inches) Length 147 mm (5.8 inches) Weight 0.345 kg (0.76 lb) 01/08/09 Dell™ Latitude™ E6400 XFR Setup and Features Information Information in this document is subject to change without notice. © 2008 Dell Inc. All rights reserved. Printed in the U.S.A. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, Latitude, Wi-Fi Catcher, and the DELL logo are trademarks of Dell Inc.; Augmentix and QuadCool are registered trademarks,, and PR-481, and DirectVue are trademarks of Augmentix Corporation; Intel is a registered trademark of Intel Corporation in the U.S. and other countries; Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Model P02G Page 21 01/08/09
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Creator Tool : Acrobat PDFMaker 8.1 for Word Modify Date : 2009:01:08 21:17:19-06:00 Create Date : 2009:01:08 21:16:53-06:00 Metadata Date : 2009:01:08 21:17:19-06:00 Producer : Acrobat Distiller 8.1.0 (Windows) Format : application/pdf Creator : Monica Melson Title : XFR D630 Service Manual Document ID : uuid:7d8ee9d3-da35-4237-982b-de2cdb1e8a85 Instance ID : uuid:33512380-8b12-47bf-abd9-bf67163e7eb5 Company : Augmentix Corporation Page Count : 21 Page Layout : OneColumn Author : Monica MelsonEXIF Metadata provided by EXIF.tools