Novatron HD36WNTD MEDIA PLAYER User Manual NTD36HD English 0811

Download:
Mirror Download [FCC.gov]
Document ID	702790
Application ID	qL8XACEXjKwlRHeaX/9cLQ==
Document Description	users manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	286.35kB (3579328 bits)
Date Submitted	2006-09-08 00:00:00
Date Available	2006-10-23 00:00:00
Creation Date	2006-09-08 15:03:43
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2006-09-08 15:03:51
Document Title	Microsoft Word - NTD36HD_English_0811.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Hak J. Kim

Federal Communication Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions :
This device may not cause harmful interference
This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the Federal Communication Commission(FCC) rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and , if not installed and used in accordance with the instructions, may
cause harmful interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
Consult the dealer or an experienced radio/television technician for help.
CAUTION! Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the user’s
authority to user’s authority to operate the euipment.
Canadian Department of Communications
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio interference Regulations of the Canadian Department
of Communications.
Hereby, NOVATRON, declares that this product is compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
CONTENTS
Introduction ··························································
Multimedia Functions······························································
Input/Output Functions····························································
Kinds of format to be supported··················································
TV Out set-up and change·······················································
Precautions·········································································
How to handle and other precautions············································
Name of each point – Top & Front···············································
10
Name of each point – Rear side··················································
11
Contents in package·······························································
12
Accessories available at shops··················································
13
Preparation to use NTD36HD ·····································
14
Procedure···········································································
14
Kinds of HDD to be installed······················································
14
HDD Installation····································································
15
Connecting with PC································································
16
To create folder and to copy files·················································
17
Disconnecting from PC····························································
18
Connecting to TV with Composite(AV) cable···································
19
Connecting with Component cable or DVI connector··························
20
Connecting with 5.1CH audio system···········································
21
Connecting with Optical or Coaxial connector··································
22
Connecting to Network····························································
23
Remote Controller & SET-UP Menu·······························
24
Structure of Remote Controller···················································
24
Booting Message & Main Menu··················································
25
Review of each Icon on Main Menu············································
26
SETUP Menu and How to set up·················································
27
VIDEO setting change·····························································
28
AUDIO setting change·····························································
29
ETC(Other) settings································································
30
NETWORK setting·································································
31
WIRELESS (Auto setting)························································
32
WIRELESS (Manual setting) ····················································
34
WIRELESS (AD-HOC setting)····················································
37
LAN Sharing setting(PC) ·························································
39
Network configuration under window 2000······································
40
IP Address Setup: Ethernet Network using a direct connection··············
45
MULTIMEDIA FILE PLAYBACK ···································
47
How to use JUKEBOX CREATOR(BGM ON) ·································
47
Enjoying movie file·································································
48
Creating DVD Library and Enjoying it············································
55
Enjoying Music Library····························································
57
Enjoying Photo Library····························································
58
External USB devices connection················································
59
Firmware update ·····················································
60
HDD Partition and Formatting ····································
61
Under Window 98SE/ME environment··········································
61
Under Window 2000/XP environment···········································
65
Troubleshooting ·····················································
69
SPECIFICATION·······················································
73
Introduction
To introduce features and functions of NTD36HD.
Multimedia Functions
To playback a recorded digital HD file
As NTD36HD supports up to 1920 x 1080 progressive scan, you can enjoy playing back
a pre-recorded HDTV program by a digital TV set-top box or person digital video
contents taken by a HD camcorder with fantastic displaying quality.
To support various video formats
NTD36HD supports various latest video formats such as a pre-recorded HD file(tp, ts),
WMV9, WMV9 HD, MPEG1/2, MPG, MPEG4(DivX, Xvid), etc.
DVD JUKE BOX Function
As NTD36HD supports ISO file and IFO file, you can store DVD titles into NTD36HD
and playback those files just like DVD Player. You can store various DVD titles into
NTD36HD and manage them forever and easily.
Auto Playback, Bookmark and Section Repeat Functions
After one file playback is ended, the next file(different in file name only) is play-backed
automatically. If you mark a specific position of a movie during playback with
“BOOKMARK” button of remote controller, you can start from the marked position again.
The function of ‘Section Repeat’ lets you repeat a specific section. Section Repeat
function is useful for language study or enjoying sports moving pictures.
Music JUKE BOX Function
As NTD36HD supports various music files like MP3, Ogg Vorbis, WMA, M3U and PLS,
you can store these files into NTD36HD and enjoy them with easy. And, in case that you
make NTD36HD’s own playlist by using ‘JUKE BOX CREATOR’ function, you can enjoy
music files(playlisted) as background music(BGM function) with easy and convenient.
Digital Photo Album
You can enjoy photo with NTD36HD together with your family through big screen of TV
in your living room, as NTD36HD has ‘Photo Slide Show’ and ‘BGM(Background Music)’
functions.
Input/Output Functions
Analog 5.1CH Audio Output and 2CH Down Mix
NTD36HD can output analog audio signal(decoded signal), as it can decode digital
signal(high quality audio sound signal like AC3, DTS) into analog signal internally by
itself. So, you can enjoy 5.1CH high quality sound without an expansive additional
device like DTS decoder or Receiver. And, as NTD36HD supports 2CH down mix, users
who have 2CH speaker only also can enjoy multi channel audio track..
High Quality DVI Connector
As NTD36HD has DVI connector which output high quality digital signal, you can enjoy
high quality display without any display distortion.
Streaming through Wired/Wireless Network
Without the procedure to copy files from PC to NTD36HD through USB cable, you can
stream various media files in your PC to NTD36HD and playback them back with TV
directly through NTD36HD’s Network solution.
Installed Wireless LAN Module and Antenna
As NTD36HD has Wired LAN as well as Wireless LAN module which supports turbo
function, WEP security function and high sensitive 5dBi antenna, you can connect
NTD36HD easily with any wireless network environment.
HOST USB2.0 lets you connect with various external USB devices
As NTD36HD has two(2) USB2.0 HOST, you can attaché various external USB devices
such as external HDD, USB memory, digital camera, etc.
External Mass Storage
As NTD36HD works perfectly as an external USB mass-storage for your PC through
high speed USB2.0, you can store huge data into NTD36HD and manage it with easy.
Kinds of format to be supported
Video
HD file format(tp,ts), Windows Media 9, Windows Media 9 HD
DivX3.11, DivX4, DivX5, DivX HD, Xvid, MPEG1, MPEG2(IFO, VOB, ISO)
Subtitle
SMI, SUB, SRT
Audio
MP3, Ogg Vorbis, WMA, AC3, DTS
Picture
JPG, JPEG, BMP, PNG
Needed minimum transferring rate
Format
Wired, Wireless LAN
USB2.O(HOST)
MPEG1/2
12Mbps
10Mbps
DivX, Xvid
1.5Mbps
1.5Mbps
WMV9
8Mbps
8Mbps
• Even though a video file format is corresponding to the above table, the video file may
not be played-back properly in case that the resolution and transferring rate of the
video file is over specific value.
• Although a video file format is corresponding to the above table, the video file may not
be played-back properly according to the speed(performance) of external USB devices
or the speed(performance) of the devices to compose a network environment.
• Even though video file format is one of the above classification, the file is not played if
the file is encoded with GMC or QPEL option.
• AVI(Audio Video Interleaved) is a container format. This means that it may contain
many different combinations of codec. So, even if NTD36HD supports most of AVI files,
but, there could be AVI files not played back properly by NTD36HD.
• Subtitle is supported properly in case only that the file name of subtitle is exactly same
as that of the moving picture.
• The audio file encoded with copy protection technology is not played back properly.
• Even if NTD36HD can playback 2048 x 1352(JPEG), it may not work properly if the
JPEG size is over 1920 x 1080.
TV OUT set-up and change
TV Standard for each country
Korea, North America
Europe and else
NTSC
PAL
※ TV out mode is originally set as PAL/Composite
※ If you want to change TV out mode, you can use TV OUT button of remote controller or TV OUT button
of the front side of NTD36HD set.
※ LED light of the front side of NTD36HD moves to corresponding position when you press TV OUT button
with 2~3sec time interval.
LED of NTD36HD Front
TV OUT button for changing TV Out mode
AUDIO OUT button for changing
AUDIO Out mode
Reference
※ Each pressing TV OUT button : PAL(Composite)
480p DVI-D
576p DVI-D
480p(Component)
DVI-A VGA 800x600 60Hz
576p(Component)
NTSC(Composite)
※ You can change and select more subdivided TV out mode in SET UP menu
※ In case of no display on TV screen, try pressing TV OUT button several times to fit TV OUT mode
※ AUDIO OUT button does not work while movie is playing.
Precautions
Do not drop or give a shock. It may cause
Do not block a ventilation opening
serious damage to internal Hard Disk Drive.
Keep it away from high temperature, high
Do not touch the plug of the AC power cord
with wet hands
humidity, nearby magnetic filed and direct
sunlight.
Do not try disassembling. It may cause an
electric shock, defect or unexpected problem.
Keep it unplugged during lightning storms or
For installing or changing HDD, you may open
when unused for long period time.
the door on bottom side.
How to handle and other precautions
•
Make sure that you have to use the AC adapter supplied together with NTD36HD. If not,
it may cause unexpected problem like breakdown, fire, etc.
•
In case that NTD36HD is used or left in a completely covered and high temperature
space(like in a car) for long time, it may cause unexpected problem.
•
Do not see the light of OPTICAL connector directly. It may have a bad effect on your
eyes.
•
In case of no use for long time, get rid of battery from remote controller.
•
To clean the exterior of NTD36HD, soak a soft cloth in a mild detergent solution diluted
with water, tightly squeeze the cloth to remove the excess liquid, wipe the affected area
of the exterior, and finish by wiping with a dry cloth.
•
Make sure that NTD36HD is not powered off suddenly during its working(playing-back,
file transferring, firmware upgrading, etc). In case of sudden power-off during working,
you need to check HDD with Windows utility(Scan Disk) after connecting with your PC
system.
•
When you try disconnecting the USB cable between NTD36HD and your PC system
after finishing jobs, make sure to follow ‘USB device safety removal’ procedure.
•
When try connecting HDD to IDE cable, S-Video cable, DVI cable, be careful not to
give some damage to pins of each connector.
Name of each point – Top & Front
Button of top side
Power(On/Off) Button
SETUP Button
OK BUTTON
STOP Button
PLAY/PAUSE BUTTON
Direction,
REW/FWD and
+15/-15sec move
Button
(▲, ▼, ◀, ▶)
Button & LED of front side
IR receiver
TV OUT Button
Video / S-Video or
Component(DVD) LED
DTV Component LED
DVI-D LED
DVI-A LED
AUDIO OUT Button
2CH Stereo Audio out LED
Analog 5.1CH
Audio out LED
Digital Sound out LED
Wired/Wireless
USB Host Connection
Connection Status LED
Status LED
Power LED
HDD LED
PLAY LED
10
Name of each point – Rear Side
External IR receiver
Connector
For Wireless Antenna
USB connector
for PC
S-Video
DC FAN
Digital Sound
Optical Connector
DVI Out connector
Digital Sound
Coaxial Connector
Composite
Video Connector
2CH Stereo
or
5.1CH Analog
Audio Connector
Component Video
Connector
Wired LAN
Port(RJ-45)
USB Host port
Power12V DC
11
Contents in package
Below items are in the package of NTD36HD
□ NTD36HD
User’s Manual
□ A to B USB Cable
□ Remote Controller
□ AAA size Batteries
□ 12V DC Power Adaptor
□ Power cord
□ Composite A/V Cable
□ Component Video Cable
□ 5dBi Wireless Antenna
(Wireless model only)
12
Accessories available at shops
If below accessories needed, you can buy them at shops by yourself.
DVI to RGB Gender
DVI to HDMI Gender
DVI Single Cable
Coaxial Cable
Optical Cable
S-VIDEO Cable
LAN Cable
13
Preparation to use NTD36HD
To introduce preparation before you enjoy NTD36HD.
Procedure
1. Check whether all accessories are supplied properly.
2. Install HDD(Hard Disk Drive) into NTD36HD according to the procedure of HDD
installation(※ note : HDD jumper should be set as Master)
3. Connect AC adapter into NTD36HD, and connect NTD36HD with PC through USB
cable
4. Power on NTD36HD(with power button of top side, or with power button of remote
controller)
5. In case that the installed HDD is not formatted, please format it first according to
normal HDD format procedure
6. Copy media files in your PC to the HDD of NTD36HD
7. After finishing copying files, disconnect NTD36HD from your PC system
8. Connect NTD36HD to TV set and(or) to audio system
9. Power on NTD36HD and change set-up value in SET-UP menu if needed. It is
recommended that NTD36HD should be rebooted if you set up Network newly
10. Now, you are ready to enjoy NTD36HD freely
Kinds of HDD to be installed
HDD Size
3.5” IDE HDD
HDD Type
HDD Capacity
HDD RPM
HDD buffer
Memory
IDE 40 pin
Any capacity
available in
market
Over 4200 RPM
Over 2M
※ NTD36HD does not support S-ATA Type
14
HDD Installation
1. Push the locker to the direction(“OPEN
).
2. There is HDD fixture inside. Push it
forward(#1) slightly and pull it up(#2).
Open up the HDD door slowly.
4. Fix HDD with HDD fixture like below picture.
3. . Insert HDD carefully inside with NTD36HD
laid down slightly to minimize impact to HDD.
5. Connect IDE cable and power cable
6 Close HDD door and push the locker to the
direction(“
like picture.
POWER
IDE
15
CLOSE”).
Connecting with PC
To copy files in your PC to NTD36HD, follow below procedure.
For Windows ME/ 2000/XP Users
1. Power on your PC system.
2. Connect NTD36HD to your PC with USB Cable. Connect AC adapter to NTD36HD. And power it
on.
3. Wait until your PC recognizes NTD36HD as USB mass storage.
4. Check whether NTD36HD is properly recognized as USB mass storage by clicking and opening
“My Computer” on Windows.
For Windows 98SE Users
1. Before connecting NTD36HD to your PC, you need to install Driver for Windows 98SE to your
PC. You may download the Driver for Windows 98SE from our website(www.iamm.co.kr)
2. After downloading it, unzip it and run the file(NTD36HD_98setup)
3. Connect NTD36HD to your PC with USB cable. And connect AC adapter to NTD36HD and
power it on. Wait until your PC recognizes NTD36HD as USB mass storage.
4. Check whether NTD36HD is properly recognized as USB mass storage by clicking and
opening “My Computer” on Windows.
16
To create folder and to copy files
Follow below procedure to copy folder and file from PC to NTD36HD.
• If the HDD has no partition or the HDD is not formatted, you need to do it first.
We recommend NTFS instead of FAT32. NTD36HD supports multi partitions.
Note : Primary partition should be over one(1)
※ For HDD partition, refer to Chapter 6.
• When you make folder in the HDD of NTD36HD, it is recommended that you make
folders like ‘MOVIE’, ‘MUSIC’, ‘PHOTO’. And, you copy files to each folder
corresponding to kind of file.
- ‘MOVIE’ folder responds to ‘MOVIE’ button of remote controller and ‘MOVIE’ icon of main
menu.
- ‘MUSIC’ folder responds to ‘MUSIC’ button of remote controller and ‘MUSIC’ icon of main
menu. And, ‘PHOTO’ folder is also same.
- You may make any name of folders freely.
• Do not store too many files into one folder.
- It is recommended that you make several sub folders and store files divisionally.
- In case that you did HDD partition with FAT32, it is recommended that you do not store
over 3GB files into one folder.
• In case that file name(folder name) is too long or has so many specific characters,
blanks or period marks, the file(folder) may cause some problem.
- In this case, change or reduce file(folder) name.
• Moving picture file and subtitle file should be in same folder.
Moving picture file and subtitle file should be in same folder. And, both files name should
be same except for ‘extension name’.
Disconnecting NTD36HD from PC
after finishing file copy
After finishing file copy, make sure that you need to next page procedure for
disconnecting NTD36HD from PC. Otherwise, copied files may have some damage.
17
Disconnecting from PC
When try disconnecting USB cable between NTD36HD and PC,
Make sure to follow below procedure.
1. Do double-click the icon of “Safely
remove USB……”.
2. Click “Stop” button after selecting
“USB Mass Storage Device”..
3. When the message like picture is
shown, disconnect USB cable
between NTD36HD and PC.
18
Connecting to TV with Composite(AV) cable
After power off NTD36HD and TV, connect them like below procedure..
•
The Composite AV cable is needed to connect with normal TV or Video and is for connecting
Composite video signal and 2CH audio signal simultaneously.
•
Connect yellow cable to the Composite connector of NTD36HD and to the VIDEO connector of
TV set.
•
Connect red cable to the FRONT-R connector of NTD36HD and to the Sound Input(Right) of
TV or Audio system.
•
Connect white cable to the FRONT-L connector of NTD36HD and to the Sound Input(Left) of
TV or Audio system.
•
You may refer to cable colors and connector colors.
•
Please do not misunderstand Composite connectors and Component(Y, Pb, Pr) connector
which is located on the bottom line of NTD36HD rear side.
•
If you want to use digital audio output(Optical, Coaxial), you don’t need to connect with red
cable and white cable.
•
In case that your TV set has S-Video input connector, you may enjoy higher display quality by
connecting with S-Video cable.(note : As we do not supply S-Video cable, you need to
purchase it by yourself from shop)
•
For more information, refer to user’s manual supplied by TV maker
19
Connecting with Component cable
or DVI connector
When connecting HDTV or other high quality displaying devices,
connect like below picture..
Connecting with Component cable
Connecting with DVI cable
•
For safety, connect cables after power off NTD36HD, TV and audio system.
•
You have to purchase DVI cable and other genders by yourselves from shop
20
Connecting with 5.1CH audio system
If you want to connect analog 5.1Ch sound output to your speaker, please
connect audio cables like below picture.
•
You need to prepare below cables or gender by yourself as those are not supplied together
with NTD36HD. (audio cable for analog 5.1Ch, 3.5 pie gender cable, etc)
•
Connect with analog 5.1Ch cables like upper picture.
•
If the input connector of speaker or audio system is the stereo jack(3.5 pie) type, you need 3.5
pie gender cable. According to below picture, connect it to each speaker properly..
CENTER
REAR-R
(Rear-Right)
FRONT-R
(Front-Right)
REAR-L
(Rear-Left)
FRONT-R
(Front-Left)
WOOFER
21
Connecting with Optical, Coaxial connector
If you want to enjoy high quality digital audio, connect with Optical or Coaxial
connector.
•
As the audio output through Optical or Coaxial is digital signal, separate devices like
DTS Decoder(or Receiver) is needed additionally.
•
For safety, connect cables after power off NTD36HD and audio system.
•
You have to purchase Optical cable or Coaxial cable by yourselves from shop.
•
Make sure that Optical cable is not bent severely.
•
Do not see optical light which comes from Optical connector. It may have a bad effect
on your eyes.
22
Connecting to Network
To connect NTD36HD to a network, some equipment is required.
Ethernet Network using a direct connection to a PC(IP Address setup : 36 page)
Connect the NTD36HD to a PC with a crossed
cable.
◈ Equipment required.
•
A crossed cable.
•
A window PC with an Ethernet connection.
Ethernet Network using a router
Connect the NTD36HD and a PC to a router or
switch HUB with 2 straight cables.
◈ Equipment required.
•
2 straight cables.
•
A window PC with an Ethernet connection
•
A router or Switch HUB
Wireless connection using a wireless router
Connect the NTD36HD and a PC to a wireless
router with a straight cable for PC.
◈ Equipment required.
•
A straight cable for PC.
•
A window PC with an Ethernet connection
•
A wireless router
Wireless Range.
Radio signals may be reflected by some obstacles or be absorbed by
others depends on their construction.
Heavy or big media file like HD file or DVD file is not streamed properly with
wireless connection.
23
Remote Controller & SET-UP Menu
To introduce remote controller structure and set-up.
Structure of Remote Controller
POWER
AUDIO OUT SELECT
MOVIE FODER HOT KEY
TV OUT SELECT
JUKEBOX CREATOR
MUSIC FOLDER HOT KEY
GOTO
PHOTO FODER HOT KEY
BOOKMARK
CLEAR ALL(JUKEBOX)
SLEEP TIMER
DELETE FILE(JUKEBOX)
RETURN / CANCEL
MUTE
SLOW FOWARDING
PLAY & PAUSE
BGM ON/OFF
SETUP
STOP
INFO/CURRENT TIME
+15SEC FWD/UP ▲
OK/SELECT
REVERSE /LEFT ◀
FORWARD/RIGHT ▶
-15SEC REV/DOWN ▼
-32~+32X FWD/REV
VOLUME
REPEAT/SHUFFLE
PREV./NEXT FILE
(DVD CHAPTER)
POINT TO POINT
SYNC SUBTITLE
ODD EJECT
ZOOM / SCROLL
COLOR SETTING
DVD TITLE/MENU
DUBBING AUDIO
DVD ANGLE
SUBTITLE
24
Booting Message & Main Menu
If power on NTD36HD, it is booted up like below picture.
1. Booting Message
This picture is displayed during bootingup.
In case of no –display.
TV Out mode is originally set as PAL/Composite. If no-display on TV screen
after booting up, try changing TV Out mode by pressing TV OUT button of
remote controller or on the front side of NTD36HD set with 2~3seconds time
interval.
2. Screen of Main Menu
Main Menu screen is displayed like below picture after completing booting up.
Main Menu is composed of several icons such as MOVIE, MUSIC, PHOTO, USB HOST, Network
and JUKE BOX(BGM). For explanation of each icon, refer to next page.
25
Review of each icon on Main Menu
Main Menu has several icons like below. If you select each icon, you can see
files stored in corresponding folder or storage.
MOVIE icon
If selecting MOVIE icon, it shows all contents in MOVIE folder of the basic
HDD. It will be convenient for you to use or manage files if you make “MOVIE”
folder in the root directory of HDD in advance.
MUSIC icon
If selecting MUSIC icon, it shows all contents in MUSIC folder of the basic
HDD. It will be convenient for you to use or manage files if you make “MUSIC”
folder in the root directory of HDD in advance.
PHOTO icon
If selecting PHOTO icon, it shows all contents in PHOTO folder of the basic
HDD. It will be convenient for you to use or manage files if you make “PHOTO”
folder in the root directory of HDD in advance.
USB 1 or 2 icon
In case that some devices are connected to USB HOST ports, these USB Icons
are activated. Once activated, those icons can be selected. Otherwise, you can
not click or select it.
NETWORK icon
In case that NTD36HD is connected to network properly through Wired or
Wireless LAN, this icon is activated and can be selected. Otherwise, you can
not select it.
JUKE BOX icon
In case that you made PLAYLIST with “JUKEBOX CREATOR” function, you
can enjoy music at any time by pressing BGM button of remote controller. The
title of playing music is displayed in the box of JUKE BOX icon.
In case of no folder like MOVIE, MUSIC, PHOTO.
In case of no folder(‘MOVIE’, ‘MUSIC’, or ‘PHOTO’ ) in HDD, all files and all folders in
the root directory of HDD are shown.
26
SETUP Menu and How to set up
If needed to change setting values before using NTD36HD, you can open
SETUP Menu like below picture by pressing SETUP button of remote controller
or NTD36HD set.
• SETUP Menu is classified like VIDEO, AUDIO, ETC, NETWORK, WIRELESS, EXIT. You can
select each item with Left/Right (◀, ▶) button of remote controller or NTD36HD set.
• To change setting values, if selecting main item, sub items are listed up. You can select each
item with Up/Down(▼, ▲) button.
• After selecting sub item, press OK button. Then, changeable setting values are displayed.
• Once you select one of changeable setting values with Up/Down(▼, ▲) button, press OK
button. Then, the value is saved and applied.
• If you want to go out without changing setting values, press RETURN button before you press
OK button for confirming any selected value. Pressing RETURN button, it makes you go to
previous step.
• After completing new setting, you can go back to main menu by pressing RETURN button
several times, by pressing SETUP button or selecting EXIT icon.
27
VIDEO Setting Change
In SETUP Menu, if selecting VIDEO icon, sub items related to video are listed up
like picture.
• TV Standard
NTSC :Korea, North America
PAL : Europe and else
• TV Type
4:3 (for normal TV)
16:9(for Wide TV such as HDTV or
Plasma TV
• Display
Original(Letter Box) :
Select this option in case of playing a wide movie(16:9) with an ordinary
4:3 TV. There will be margins on the upper and lower sides of the screen.
Pan & Scan :
Select this option if you want a wide movie(16:9) to be adjusted fully to the
screen of ordinary 4:3 TV. The left/right of the movie is cut, and the margin of
top/bottom is disappeared.
Full Screen : Select this option if you want to adjust a movie fully to the
screen of TV with no consideration of original ratio. In this case, according to
the ratio of original movie, displaying size is enlarged upward/downward or to
the left/right.
• Video Out
Composite/S-Video : In case of connecting with TV through Composite, S-Video or
Component 480i output connector.
Component(each Mode) : In case of connecting with TV through Component(Y, Pb, Pr)
output connector.
DVI (Auto or each Mode ) : In case of connecting with TV through DVI connector.
VGA (each Mode ) : In case of connecting with Monitor through DVI to RGB Gender
connector.
※ By pressing TV OUT button of remote controller(or NTD36HD unit) several times,
you can change TV standard and Video Out mode in order. Standard modes
changeable in order is seven(7) level.
28
AUDIO setting change
In SETUP Menu, if selecting AUDIO icon, sub items related to audio are displayed
like picture..
• SPDIF
Down mix : If selecting this option, all kind of
digital audio(PCM, MP3, AC3, DTS) are decoded
into analog signal. So, you can hear sound
without any separate DTS Decoder(or Receiver).
Pass through : If selecting this option, digital
signal is outputted directly without decoding
process. So, you need a separate Receiver or
Decoder to hear sound in case of using digital
audio connectors(Optical, Coaxial)
• Audio Channels
2 ch : If selecting this option, it outputs analog
audio signal with 2CH. If you use 2CH speaker,
please select this option.
5.1 ch :
If selecting this option, it outputs
analog audio signal with 5.1CH. Without any
separate Decoder or Receiver, you can connect
with 5.1CH speaker directly
• Sound Effects
On : When power off and on NTD36HD, sound
effect comes out.
Off : No sound effect in power on/off..
• Music Play Mode
Single Play : It plays only selected music file.
Folder : It plays all music files in same folder
Shuffle: It plays all music file randomly in same
folder.
29
ETC(Other) settings
In SETUP Menu, if selecting ETC icon, sub items are listed up like below picture.
• Slideshow Interval : To control time delay for displaying next picture file during
slideshow.
3sec, 5sec, 10sec ~ 60sec (total 9 levels)
• OSD Lang. : To change OSD languages.
• Sub. Color : To change subtitle color when playing back a moving picture.
total nine(9) kinds available.
• Sub. Size : To change size of subtitle when playing back a moving picture.
total two(2) kinds(Large/Small) available.
• User defined background : To change the background of main menu with other picture
file that you want.
You choose a picture file in the basic
HDD or in folder through network.
• Use default background : To use original background by canceling the user defined
background.
• Factory reset : To clear all values set by user and to initialize NTD36HD with values set
at factory.
• Firmware Update: To select firmware bin file and to update with new firmware.
30
NETWORK setting
The sub option related to network will be displayed by selection of NETWORK icon.
• Network Connection : Select either “Wired Net.” (for the Ethernet connection) or
“Wireless Net.” depending on the type of network connection
you want to set up.
• Connection Status : It shows current network connection status.
• Address Setup:
DHCP(Auto IP) : IP address will be assigned automatically with using a router.
Static IP : IP address should be assigned manually by user with Ethernet networking using a
direct connection to the computer. Input the IP address, Netmask and Default gateway.
• MAC (wired) : It shows MAC address of wired LAN.
31
WIRELESS(Auto setting)
This section shows how to make wireless network setup automatically to
communicate with devices under network environment. You don’t need to change
any setting value manually.
AP SEARCH
Click “AP SEARCH” to look for AP
available.
List of AP available
You can select the AP that you want
to use and press “OK” button.
In case that you set ESSID as ‘hidden’ or you set
‘Password’ for your AP.
In case that you set ESSID as ‘hidden’ or you set ‘password’ with your AP, you
need to enter ESSID name or Password by yourself. For entering ESSID name or
Password, NTD36HD will show you the specific window.
32
Check “ESSSID”
You can make sure whether the setting
value(ESSID, Channel, etc) is right or
not. The setting values should be match
with your wireless router(or AP) or PC.
Then, you may press “RETURN” button
to store this setting and exit.
Getting IP address
The NTD36HD will try to get new IP
address from your router. It takes about
30 ~ 60 seconds.
With Adhoc mode
If you are using Ad-hoc mode, you
have to enter IP address manually on
“NETWOKR” section.
Check NETWORK icon activation
NETWORK icon will be activated if the
network is connected successfully.
Network
icon
activation
According to network security setting,
network status, etc, sometimes it will
take 5 ~ 10 seconds for the network
icon to be activated. So, you need to
wait for some time until the network
icon is activated.
33
WIRELESS (Manual setting)
This section shows how to make wireless network setup manually to communicate
with devices under network environment.
Before setting this section, check that Connection should be set Wireless
net. on NETWORK section.
If you are running wireless network, all device on your network need to
share the same ESSID, CHANNEL, Wireless security and Encryption key in
order for them to communicate each other. If you do not know what method
of authentication is enabled in your wireless router/AP, please refer to its
manual on how to see or set it up.
ESSID
The ESSID of NTD36HD should be
exactly same as that of the wireless
router or the AP(access point) that
you use under network environment.
WORDING.
The “SSID” is also referred to as the
“ESSID” or “Extended Service Set ID”
CHANNEL
The 802.11g and b specifications
supports up to 14 overlapping
channels for radio communication.
You can select from AUTO to CH13.
The selected channel of NTD36HD
should be as that of the wireless
router or the AP(access point) that
you use under network environment.
34
Wireless Security
(Authentication Method)
You can set different authentication
methods which determine different
encryption schemes. There are 6
authentication methods(WEP Auto,
WEP SHARED, WEP OPEN,
WPAPSK, WPANONE, WPA2PSK).
Encryption algorithm
(WEP or WPA)
The encryption algorithm determines
the authentication method you
select.
Relation.
Authentication
Method
Encryption
Algorithm
WEP Auto
WEP SHARED
WEP OPEN
NONE
WEP
WPAPSK
TKIP
WPA NONE
WPA2PSK
AES
Encryption (WEP)
Encryption(WEP) option should be
applied in case that “WEP”
encryption algorithm is used.
The encryption setting of NTD36HD
should be exactly same as that of
the wireless router or the AP(access
point) you use under network
environment.
35
Encryption(WPA ,Pre-Shared Key)
Encryption(WPA) option should be
applied in case that “TKIP” or “AES”
encryption algorithm is used.
The encryption key of NTD36HD
should be exactly same as that of
the wireless router or AP(access
point) that you use under network
environment.
MAC (wireless)
It shows MAC address of wireless
LAN
Review of wording related to Wireless, Security.
Each manufacturer may use different wording when naming each function. Make
your reference for below wordings.
ESSID : referred to as SSID or Extended Service Set ID
ASCII when WEP key or WPA key input : referred to as Characters
HEX when WEP key or WPA key input : referred to as Hexadecimal
Wireless security : referred to as Authentication method or Type.
Encryption : referred to as Encryption Algorithm or Encryption Type
NONE : referred to as NULL
WPAPSK : referred to as WPA P-Key, WPA Pre-Shared Key or Network Key
Key : referred to as Key Value
36

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2006:09:08 15:03:51-04:00
Create Date                     : 2006:09:08 15:03:43-04:00
Metadata Date                   : 2006:09:08 15:03:51-04:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : Microsoft Word - NTD36HD_English_0811.doc
Creator                         : Hak J. Kim
Document ID                     : uuid:14e54eb1-cf61-4d36-a9e5-241558247381
Instance ID                     : uuid:3ebca6dd-dc80-42eb-a14a-790e0911f43b
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Page Count                      : 37
Author                          : Hak J. Kim

EXIF Metadata provided by EXIF.tools