Nutek ATDB Remote Vehicle Control System User Manual CA 150 owners revC1

Download:
Mirror Download [FCC.gov]
Document ID	1088871
Application ID	EtJHq81kp32kioPLWjesjQ==
Document Description	DIYTX user s manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.6kB (520019 bits)
Date Submitted	2009-04-01 00:00:00
Date Available	2009-04-02 00:00:00
Creation Date	2009-03-10 10:42:04
Producing Software	pdfFactory Pro 2.45 (Windows XP Professional Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	CA-150 owners revC1.pdf
Document Creator	pdfFactory Pro www.pdffactory.com
Document Author:	100195

CDDE ALARITI
Remote Vehicle Control System
Vehicle Security System
With Remote Keyless Entry
IMPORTANT NOTE: The operation at the Security and Conven enoe System as described in this manual is
applinahle tn most vehides Hnwever‘ due “0 the. configuration nf some vehicles, some. flnrjinns ANniOR
SAFETY PRECAUTIONS may net apply. Please see your install no dealer lor more intermahon,
Table of Contents
Using Your Remote Transmitter ......
Arming the Security System
Pre-enn Mode
Disarming the Security System
Disablrngltnabling oonflrmatlor chi'ps
Allerrrplet: Inlrusiun Identification
Using Your Remote Transmitter AAAAAA
Two Stage Door Unlock (optionall’
Acn‘vatrng tre Trunk Release Feature (Optionan‘
Turning on the Veiude's Hpadligh’s (nptinrarr
Usrng the Car Finder Feature
Personal Dmtectim Alarm (Panic)
Using the Tra'tsmltter Flashlight Feature
Using Valet Mode
Automatic Convenience Options
Illumhated Entry
Automatic Armlng
Ignition Lock
Ignition Unlock
When Yourseeurity Syslem is Triggered .....
Optional Songbird Feature
Replacing Rem our: Control Batterlcs ..
Emergency Override Procedure
Standard Emergercy Override Prowdure
Code-J Override Procedure
Prcgrammrng Your personal override Code
Code Systems. Inc. Limited Liteu'me Warranty
’ Mar lemme additional inera-‘IaLro/r labor: mrwonenls and Installation cost
Using Your Remote Transmmer
Arming the Slcurlly System
To arm the system. exit the vehicle. close all doors. then press the IOCK icon button
on the transmitter The how will honk Mice and lhe parking lights wlll flash twice.
indicating the system is armed The doors will also look at this time (it equipped and
connected). blue dashboard status indicator light will blink steadily. once per second.
To arm the system silently. press and hold the LOCK icon button 'or 2 seconds The
parking lights will flash 2 times. indicatm the system is armed. has looked the doors
(il equipped and connected) and armed the semmy system The blue dash mountec
status indicator light will bllnk steadily. orce pei second
Pro-arm Mode
If the hon honks and the parking lights flash only once. mis ndicates that the vehicles interior light is
on or an entrance is Ielt open. Check to see that all doors hood and t'urlk are closed properly Once all
entrances arc socurcd (and the interior light is oft}. lhc systcm wl|| hank/flash again. The system is
now leIy armed. (If the entrance is not secured within 4 mithes. the system will arm and ignore the
unsecured entrance until it is closed)
Disarmirrg the Security System
To disarm the system press the UNLOCK icon button. The horn wil chirp and the parking lights will
flash once. and the doors will unlock (it equipped and connected). To disarm the system silently.
press and held the UNLOCK lam button lor 2 seconds The parking lights will flash, irdicatlng the
system is disarmed and has unlocked the doors (It eculppea and connected).
Disabllny/Erlaltllny Confirmation Chirps
1 Turn t'le I'flitiDfl key ON then OFF
2. Vflt’lin 10 scconds push and noloasc the valor/override button 3 times,
3. The lDUlll will llullk 2 lillles to disable llulll llullks or 1 lirlle to enable Ilolll “lurlks.
Attempted intrusion Mortification
This system will inform you i" an ntrusiun attempt has occurred while you were away iron the vehicle. lr
an intrusion attempt occurred, the horn will hank 4 times and the parking lights Wlll flash 3 times when
disarrring the system. Enter the vehicle an observe the dash n'ounted status indicatcr light to identity
which zcne was Iriggered,
1. ITvs Inzerior Thelt Sense” 1 flash. pause 1 flash, etc.
2. Hood or Trunk Pinswilct- 2 flashes WLSe 2 flashes etc.
3. Door Erltly- 3 flashes. pause 31laslles.elc.
The intrusion wanting indicators are stored in the system's memory and Will oe erased wren the ignition
key is tuned cln.
'ThronghoLII Ulls manual. “press refers lo plesslng fol less than 1 second
Using Your Remote Transmitter
Two Stage Door Unlock (Optional)
If this leature in enablec on your system. pressing the JNLOCK icon button one time on the transmitter
will unlcck only the driver‘s dour. Press the UNLOCK icon DLflOn again wlthln 15 seconds to unlock
the remaining doors.
Activating the Trunk Release Feature (Optional)
ll this leature is enabled on your system. pressing and hnlcing the TRUNK icon button on the
transmitter for 2 seconds will open the vehlcles "runk or hatch.
Turning on the Vehicle’s Headlights (Optional)
"this leaturc is enabled on your system, maxing and holcing the LODK icon button on the transmitter
for 2 aewiids will lulu uii [lie vehicle‘s headlights lui 30 seconds
Using the Progressive Car Finder Feature
Press the * icor button on the transmmer to locate your vehicle. The hour will honk 5 times at low
volume increasing in volume each of 3 til-tee the button is pressed.
Using the Personal Protection Alarm (Panic)
Press and hold the at icnn bii'tnn nri the. transrritter lnr 3 semnrls to activate. the. personal protection
alarm The horn will pulse lor 30 seconds. Pressing any button 01 the transmitter will turn the
personal protection alarm ow.
Using the Transmitter Flashlight Feature
The 6 button transmitters included with your system have a tashlight bulb built into the top olthe
transmitter. 2rcssirig and holding the LIGHT icon button on the transmitter will activate the flashlight
urilil llie bulluii is released.
Using Valet Mode
To engage valet mode:
1. Turn the ignition key to the ON position
2. Press and hold the valet/override buttm until the blue dash nourted status indicator
light turrs on SOlICI. Indicating that the system has entered valet mode.
When valet mode is activated the blue dash mounted status ndicatnr light will light solid. and all
security tundicns will be disabled.
To disengage valet Mode:
1. Turn the ignition key to the ON position.
2. Press and release the valet/override buttun the blue dash maunted szatus indicator
light will turn all Indicating that the system has exited vale“ mode.
When the valet mode has been deactivated the blue dash mounted status indicator light will turn 0"
and all security functions Will be enabled the next time the system is armed
Automatic Convenience Options
illuminated Envy
When the system is UNLOCKED. the mantle oocrtesy lights will turn on for 30 secunds. or until
the vehicle ls started or the system is re—Iocked,
Automatic Arminq
If his feature is enabled on your system, the security system will a'm automatically 1 mirlute
after the igriiion key is turned off and the last vehicle door rs closed, The dash mounted status
LED Will hash rapidly indicating the 1 ‘ninute countdown. This sequence can be aborted by
opening one of the vehicle's doors.
Ignition Lock
If all doors are closed and the vehicle is started with the key. the doors will autcmatically luck.
If vehicle is started with vehicle doors open. the doors will not look and will rerrain unlocked
even after doors are cosed
Ignition Unlock
When removing the key from the Ig him, the doors wII automatically u1lock
When Your Security System ls Triggered
The security system will trigger it one orihe ioliowing events occurs while the system is
armed.
1 Any protected entrance is opened.
2. The velicle's ignitlon is turned on.
3. The vehicle isjclted hard enough to trager the IT-s sensor.
When the system is triggered. the vehicle's ho'n will produce a series of random iiorn honks
called “Real Panic sound" Ihe system erI trigger for 30 seconds and then reerm, Ihe
system will also silence ii the UNLOCK icon button is pressed. disarming the system and
unlockhg the vehicle's chrs.
The blue dash mcunted status indicator light is a hgh intensity blue lig'tt that is momted on
the vehicle's dash The blue dash mounted status ndiaator light is used to warn a would-be
thief that the vehicle is protected Theblue dash mounted status indicator light is also used to
alert ycu or the vehicles status.
"the blue daeh mounted ...,.Then the Security System
status indicator light “a .....
Flashing slowly is armed
Oil is disarmed
Flashing qLiukly is auluiiiuliu aiiri wuirlduwri
Flashing intermittently has been triggered (Intrusion Identification)
On solid is in valet mode
Optional Songbird Feature
The optio'ral songbird lecture (Code Alarm part a 581 and labor required) allows you to program
songs and tones to your system (Le Setting a different tone ‘or Lock actlvatlor anc unlock activauon).
Turning Songbird On: Press and release ‘he TRUNK icon button on the remote control. then press and
hold the LOCK imn button on the remote control within 2 seconds The 531 speaker will give rotrficatorr
that Sut‘glritu has be hunted ONl
Turning Songbird Off: Press and release the TRUNK icon button on the remote conzrol. then press and
hold the LN_OCK icon button on the remote control witrin 2 seconds The 551 speaker wil give
notification that Songbird has be armed OFF.
Setting Songbird Tones: Press and release the TRUNK icon button on the remote control, then press
the OPT button on the. remote nontml within 2 seconds Press the. I OCK imn button or the remote.
control or UNLOCK lW‘t button on the remote control to scroll through he different tones,
While in this mode the TRUNK iccn button on the remote control w H change the length or version of
the tone.
Press the OPT button on the emote control to select “he desired tone and exit programming
Please see your sales assoc-ate for details on Song Bird or any other Code Alarm acoesso'y,
Replacing Remote Control Batteries
The two (2) 3 volt lithium batteries (model CRZDZ5) Inside each remote control shou d last
approximately 1 year under normal use When the batteries become weak you will rotice t'te
transmitter range (the distance from the ve'ticle the remote control will worki deterlorate and the small
indicator Ilght on the remote control will dim. To replace the remote control batteries
1 Using a small (an) philllps screwdriver, remove the screw on the sack of the remote control
2 Gently unenap the halves oi the remote control apart,
3 Slice the 2 lithium batteries out at the circut board‘ observtng the +l- symbols on the
batteries and replace with new litt'ium 3 volt batteries (model CR2025)
Gently snap the halves ot the remote control back together and reinstall the phillips screw
on the back of the remote control
Test the operation at the remote control,
Emergency Override Procedure
If your transmitter is lost or disabled, it will be necessary Jse the emergency override button
to turn the security system oil‘i There are two types at emergency override procedures,
Check With your installing dealer to find out what has been activated on your system.
Standard Emergenw Override Prooedu'e
1. Enler the ve'ricle (the security system vaI trigger
2. Turn zhe ignition 
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : CA-150 owners revC1.pdf
Author                          : 100195
Creator                         : pdfFactory Pro www.pdffactory.com
Producer                        : pdfFactory Pro 2.45 (Windows XP Professional Chinese)
Create Date                     : 2009:03:10 10:42:04+08:00
Page Count                      : 9

EXIF Metadata provided by EXIF.tools