Nutek ATGB ALARM DEVICE User Manual 1286516

Nutek Corporation ALARM DEVICE 1286516

Users Manual

128-81191 of 8112133*4*5BUTTON RECEIVERCHANNEL SYSTEM FUNCTIONLock And Arm Alarm, also initiate andterminates *PanicUnlock And Disarm, also initiates andterminates *Panic. Programmable tounlock drivers door and or all doors.Lock and arm/unlock and disarm. Maybe programmed to unlock driver's dooror all doors. Also will initiate andterminate *Panic.Pulsed or switched output to controlRemote Trunk Release or optionaldevice connected to channel 3.When pressed and release two times,will provide pulsed output or activate theRemote Start option when installed.When so equipped, this button can beused to operate an optional deviceconnected to channel 4.When so equipped, this button can beused to operate an optional deviceconnected to channel 5.These transmitters make use of icons (symbols) to identify the reactionyour security system/keyless entry/and or remote start system, whereapplicable, will have when any icon (button) is pressed. Theseicons are programmed at time of installation to meet the needs of theindividual and to complement the vehicle that the system is installed in.To replace a transmitter or add transmitters, please follow theprogramming instructions listed on the pages of this manual.Transmitter Programming Guide* Where So EquippedModel 07S
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution :To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu