Nxcontrol System NXREMOTE01 NxRemote Kit User Manual
Nxcontrol System Co., Ltd. NxRemote Kit Users Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3037083 |
| Application ID | ONrJImBxSMRlWICUs3N4Qw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.24kB (815448 bits) |
| Date Submitted | 2016-06-22 00:00:00 |
| Date Available | 2016-06-23 00:00:00 |
| Creation Date | 2015-12-08 10:59:59 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2015-12-17 11:59:13 |
| Document Title | Users Manual |
| Document Creator | Adobe Illustrator CS6 (Windows) |
TM
1. Download APP
TM
NxRemote
NxBee
Micro USB
Status Light
Power Light
IR Code Learning Light
Scan QR code or search “NxRemote” for downloading
APP on Google Play.
2. Plug in
3. Pair
1. Check your Android phone / tablet supporting USB
OTG function.
List of Android Phones and Tablet supports OTG Function:
http://www.nxcontrol.com/OTG.html
NxRemote Connected
IR Transmitter
4. Setup & Learn IR codes
4.1 Learn A/C (OFF Button)
Blink
Red
2MUUDE0002 2015.12
5. Try Your NxRemote
Remote Dongle
Wireless Type
ZigBee
IR Code Learning
Yes
Interface
Micro USB
Personal Scenario Setting
Yes
Operating System
Android 4.0 above, USB OTG Supported
Color
Black / White
Sizes (LxWxH)
49.8 x 22.0 x 7.0 mm
Weight
15g
Device Type
RF to IR Adapter
Wireless Type
ZigBee
Networking Range
30 m above (In door)
IR Frequency
36 KHz ~ 56 KHz
Power
3V CR2032 Lithium Battery
Color
Black / White
Sizes (RxH)
R13.0 x 7.3 mm
Weight
10g
6. Adhere NxBee
VOL
Profile
A/C
Others
APP
APP
APP
ON
1. Follow this step on APP to search
NxBee: Setting -> Device Setup and click
search button.
2. Select NxBee (Blink Red) and
Search NxBee
enter comfirmation number, it will stop
blink and show up on the screen.
3. Click NxBee icon. If it connects with
NxRemote correctly, the green light will
blink. If not, please replace battery and
try again.
Original Remote
8. Scenario Setup
John
Settings
1. Press Home key or back button on top left side
to home page, the device icons will light up.
2. Press Power key on your NxRemote APP to check
if the device works.
Green light will blink when you press the button key.
1. Place NxBee close to IR receiving
area (near power light usually) and try turn on/off.
2. Find an available IR receving area and then
adhere NxBee.
VOL
CH
VOL
Save Scenario?
OK
CH
Delay Time
CANCEL
Reading Mode
SOURCE
SOURCE
SAVE
CANCEL
Relax Mode
Important Safety Information
Limited Warranty Statement
Telephone Number: _______________________________________________________
When using this product, the safety precautions below must be taken avoid possible legal liabilities and
damages.
Address: ________________________________________________________________
Observe all warnings in the operation instructions on the product.
The Limited Warranty Statement is a voluntary manufacturer's warranty. It provides
rights separate to rights provided by consumer law, including but not limited to those
relating to non-conforming goods. As such, the Limited Warranty Statement benefits are
in addition to, and not instead of, rights provided by consumer law.
E-mail: __________________________________________________________________
Purchase Date: ____________ /____________ /____________________ (DD/MM/YYYY)
14:00
Party Mode
Exercise Mode
Retain and follow all product safety and operation instructions.
To reduce the risk of bodily injury, electric shock, fire and damage to the equipment. Observe the following
precautions.
Care
Dealer's Telephone Number: ________________________________________________
Do not open NxRemote. There are no user-serviceable parts inside. Do not allow moisture to enter the
unit. Moisture will corrode the inner electronics. Any changes or modifications not expressly approved by
NxControl void the user’s authority to operate the device and could void the warranty. The product should
only be used in environments with ambient temperatures between 0 degree C (32 degree F) and 35 degree
C (95 degree F).
Dealer's Address: _________________________________________________________
Handle Battery Carefully
NxBee contains an lithium non-rechargeable battery. Battery life is dependent upon usage. Heavy daily use
will result in shorter battery life. There is a risk of fire and burns if the battery is handle improperly. Do not
disassemble, crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a
battery to temperatures higher than 60 degree C (140 degree F).
If battery is end-of-life, consult local laws and regulations for proper battery disposal in your area. If there
are no local regulations concerning battery disposal, please dispose of the dead battery in a waste bin for
electronic devices. KEEP ALL BATTERIES OUT OF THE REACH OF CHILDREN.
Disposal and Recycling Information
The symbol indicates that your product must be disposed of properly according to local laws and
regulations. When your product reaches its end of life, contact your local authorities to learn about
recycling options.
IR transmission
direction
IR receiving area (Do NOT cover power light.)
Original Remote
End-of-life Battery Disposal Instructions
16:00
European Union – Disposal Information
The symbol above means that according to local laws and regulations your product and/or its battery shall
be disposed of separately from household waste. When this product reaches its end of like, take it to a
collection point designated by local authorities. The separate collection and recycling of your product
and/or it battery at the time of disposal will help conserve natural resources and ensure that it is recycled
in a manner that protects human health and the environment.
NxRemote Kit should only be used in environments with
ambient temperatures between 0°C (32°F) and 35°C (95°F)
1. Press record button to start up.
2. Start your control process, and click record button again
when you finish all actions.
3. Save your action to move on next step.
4. Choose your scenario icon and select user if already
add one, set delay time for each buttons if necessary,
name your mode and save it.
5. Try and enjoy your Scenario by one click.
1. Adjust the status (Temp., Mode,
Original Remote
Fan Spd, Swing, etc) on original remote
and NxRemote with the same status what you prefer.
Warranty Information Form
________________________________________________________________________
ECO Mode
2. Point your original remote at the bottom of Nx Remote,
and dick OFF key to learn the IR code.
Dealer's Name: ___________________________________________________________
Profile
TEMP
Click corresponding key on your original remote to learn
IR code. If the countdown message disappears, the button
learning process is completed.
Mr./Mrs./Ms./Miss: _______________________________________________________
Movie Mode
A/C
70
OFF
turned “ON” before learning.
1. Click “OFF” button to begin
learning process.
SWING
＊A/C remote must be turned “OFF” before learning.
2. Click “ Power ” button to begin learning process, point your
original remote at the bottom of NxRemote and click the
power key to learn the IR code.
Listen
Others
25
＊A/C remote must be
Scenario
CH
IR
3 Inch
IR
3 Inch
FAN SPEED
2. When notice message shows up, make sure to check
“Use by default for this USB device” to allow the app to
access your USB device.
(Some devices need to enable USB OTG function. e.g.
Sony : Settings -> Xperia Connectivity -> USB Connectivity
-> Detect USB device)
7. Control
CH
Settings
Reading Mode
VOL
OFF
MODE
Listen
John
Watch
Blink
Red
OFF
Scenario
Watch
©2015 NxControl System Co, Ltd. All right reserved.
All other trademarks are the property of their
respective owners.
The use of the word partner does not imply a
partnership relationship and any other company.
NxControl assures no responsibility for any errors
that may appear in the manual.
Information contained here in is subject to change
without notice.
10 seconds
10 seconds
10 seconds
Remove NxBee back cover, and pull out the battery
tab. The green light will start blinking.
Learning.....
Learning.....
Learning.....
IR Receiver
Device Type
4.2 Learn A/C (ON Button)
Safety Precaution for Small Children
Do not leave your product within the reach of small children or allow them to play with it. They could hurt
themselves or others, or could accidentally damage the product. Your product contains small parts with sharp
edges that may cause an injury or which could become detached and create chocking hazard. Consult the
doctor immediately if the accessories or battery are swallowed..
Do not disassemble it or attempt to recharge it outside the system. Do not crush, puncture, dispose of in fi re,
short the external contacts, or expose to water or other liquids. Dispose of the battery in accordance with local
regulations and instructions from your service provider.
Your hardware product is warranted against defects in materials and workmanship for a
period of ONE (1) YEAR from the date of original retail purchase ("Warranty Period"). If a
defect arises during the Warranty Period, NxControl, at its option and to the extent
permitted by law will (1) repair the product at no charge using new parts or parts that are
equivalent to new in performance and reliability, or (2) exchange the product with a
functionally equivalent product that is new or equivalent to new in performance and
reliability. This warranty excludes damage resulting from abuse, accident, modifications
or other causes that are not defects in materials and workmanship.
Other than the consumer law rights to which you are entitled, all warranties, conditions
and other terms not set out in this warranty document are excluded from the Limited
Warranty Statement. Some countries do not allow limitations on how long such
warranties, conditions and / or implied terms may last, so the limitation described above
may not apply to you. NxControl does not warrant, represent or undertake that it will be
able to repair or replace any NxControl Product under this warranty without risk to and
/ or loss of information and / or data stored on the NxControl Product. In no event shall
NxControl be liable for (a) any losses that were not caused by our breach of this warranty
document; (b) any loss or damage that was not, at the time of your purchase of the
product, a reasonably foreseeable consequence of NxControl breaching this warranty
document; or (c) losses relating to any business of yours, loss of profits, loss of data or
loss of opportunity. The provisions of this warranty document shall not apply to (i) death
or personal injury, (ii) fraud or gross negligence; or (iii) fraudulent misrepresentation; or
(iv) any other liability that cannot be limited or excluded as a matter of law.
Some countries do not allow limitations on how long an implied warranty lasts, or allow
exclusion or limitation of incidental or consequential damages, so the above limitations
or exclusions may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights, which vary from country to country. Proof of purchase may
be required to verify eligibility.
For more information and contact support, please refer to NxControl webpage at
http://www.nxcontrol.com
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2015:12:08 10:59:59+09:00 Creator : Adobe Illustrator CS6 (Windows) Modify Date : 2015:12:17 11:59:13+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : Unicorn說明書1208V01 Metadata Date : 2015:12:17 11:59:13+08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 84 Thumbnail Format : JPEG Thumbnail Image : (Binary data 12488 bytes, use -b option to extract) Instance ID : uuid:00d583df-a9b7-4451-9501-2bd47a538b9c Document ID : xmp.did:D38401ED4C9DE511BB219ABF86253ABE Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:7d09b13a-57e2-487d-88bc-324d5ff3dc65 Derived From Document ID : xmp.did:E444D951539DE511B25AE9AC063ED449 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:01E540664A3DDD11BD33D3EB8D3A1068, xmp.iid:6B6AE2A5723EDD11A6F1BABF7C5A7A51, xmp.iid:BFB9DE0A9741DD11B635A7E64BB34B63, xmp.iid:0B9FED2F200A11689FE8CB9EA85C5459, xmp.iid:99D9A2DF7848DD11BB47877F8DDF9079, xmp.iid:FA7F117407206811ACAFBB7619075ADF, xmp.iid:F97F11740720681195FEE5A36E835ED7, xmp.iid:D38401ED4C9DE511BB219ABF86253ABE History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:18 22:24:01+07:00, 2008:06:19 20:30:34-07:00, 2008:06:24 10:41:26+08:00, 2008:06:26 06:05:12-07:00, 2008:07:02 13:59:06-07:00, 2008:07:21 17:59:44+05:30, 2008:08:01 16:42:45+07:00, 2015:12:08 10:59:51+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS6 (Windows) History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Manifest Link Form : EmbedByReference Manifest Reference File Path : C:\Users\user\Desktop\static_qr_code_without_logo.jpg Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 680.000526 Max Page Size H : 219.999319 Max Page Size Unit : Millimeters Font Name : Calibri, Calibri-Bold, AdobeMingStd-Light, AdobeFanHeitiStd-Bold, BPreplay Font Family : Calibri, Calibri, Adobe 明體 Std, Adobe 繁黑體 Std, BPreplay Font Face : Regular, Bold, L, B Font Type : Open Type, Open Type, Open Type, Open Type, Unknown Font Version : Version 5.73, Version 0.90, Version 6.007;PS 6.001;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.007;PS 6.001;hotconv 1.0.67;makeotf.lib2.5.33168, Version 1.01 Font Composite : False, False, False, False, False Font File Name : calibri.ttf, ufonts.com_calibri-bold.ttf, AdobeMingStd-Light.otf, AdobeFanHeitiStd-Bold.otf, ARIALUNI.TTF Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 鮮豔 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 2EXIF Metadata provided by EXIF.tools