Nyko Technologies 0009260233 Network Extender User Manual

Download:
Mirror Download [FCC.gov]
Document ID	353320
Application ID	eQW24XTHI2MHNAz9Kq1Tog==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	125.11kB (1563815 bits)
Date Submitted	2003-09-04 00:00:00
Date Available	2003-09-03 00:00:00
Creation Date	2003-08-13 20:16:33
Producing Software	Adobe PDF library 5.00
Document Lastmod	2003-08-13 20:26:53
Document Title	User Manual
Document Creator	Adobe Illustrator 10

Quick Start Guide
MO
TE
STEP 1. Pre-installation
Test:
RE
BAS
or
STEP 1
Network Device
Test your wired Ethernet
connection by using your
computer to access the Internet
via a DSL or Cable Modem. For
example, go to www.nyko.com
to confirm connection. (Note:
Dial-up connections using a 28K
or 56K modem are not Ethernet
connections.)
Personal Computer, Video Game Console, Etc.
Test your wired Ethernet
connection by using your game
console to access the Internet.
Play one online game to confirm
connection.
DSL or
Cable Modem
or
Note: You can use the Ethernet
cables supplied with the Wireless
Net Extender, or your current
standard Ethernet cables.
Thank you for purchasing NYKO's Wireless Net Extender™ -- the "Invisible Ethernet Cable". This unique
product provides a wireless replacement for long Ethernet cables, at a fraction of the cost of current
wireless network equipment. The Base Unit and the Remote Unit are factory matched to one another.
They will not connect or interfere with another Wireless Net Extender set, nor with any other wireless
product. Though this product is designed for wireless online gaming with PlayStation®2 and Xbox™, this
10Base-T system can also be used with computers, printers, and any other Ethernet enabled devices.
The Base and Remote Units have a range of up to 100 feet (30 m) and can transmit through most walls,
roofs, and floors. Therefore, no costly network wiring installations are required. The Wireless Net
Extender offers the ultimate in true Plug-n-Play -- just plug in the power and Ethernet cable and it's GAME
ON -- no drivers, no software and no configuration.
NYKO® and WIRELESS NET EXTENDER™ are trademarks of NYKO Technologies, Inc. PlayStation®2 is a registered
trademark of Sony Computer Entertainment Inc. Xbox™ is a trademark of Microsoft Corporation. This is a NYKO product and
is not endorsed, manufactured or distributed by the companies listed above.
Contents
DSL or
Cable Modem
Quick Start Guide
STEP 2
Network Device
SE
BA
120V AC to
4V DC Transformer
• Connects to high-speed internet without cables
• No programming or setup -- factory configured -- plug in and
play
• Secure encrypted communication with factory matched pairs
• Use multiple sets within the same area
• Can be used for connecting most any Ethernet product: printers,
scanners, laptops, game consoles, PCs, etc. up to 100 feet
• 1.5 Mbps, low latency RF wireless link.
• Can also be used with hubs, switches or routers.
Definitions:
REM
OTE
Remote Unit
Personal Computer, Video Game Console, Etc.
Features:
x2
Power
Supply
Base Unit
Network Device
Test the
current network
configuration using
standard Ethernet
cables.
x2
Ethernet
Cable
6.5 ft (2 m) RJ45
1 - Base Unit (1 slider switch + 2
Ethernet ports)
1 - Remote Unit (1 Ethernet port)
2 - Wall Power Adaptors (120V AC 60Hz
7W to 4V DC 300mA)
2 - Ethernet Cables 6.5 feet (2m), RJ45
1 - Instruction Manual
Game Console: Any Ethernet enabled gaming device such as
PlayStation®2 or Xbox™.
Network Device: Any Ethernet enabled device. Examples
include: Game Consoles, PCs, laptops, printers and scanners.
System Requirements:
• The user must have a DSL or Cable Modem with an active
account.
• This product is designed for Ethernet enabled PlayStation®2 or
Xbox™ game consoles; it can also be used with computers,
network printers and other Network Devices.
• The model numbers of Ethernet Adaptors for the current Game
Consoles are as follows:
- PlayStation®2: Network Adaptor - Model # SCPH-10281
- Xbox™: Ethernet built in
Personal Computer, Video Game Console, Etc.
Network Device
Game Console
or
PC
or
GAME
CONSOLE
COMPUTER
any other
Ethernet enabled device
Switch
Position
Remote Unit
STEP 2: Setup for Wireless/Remote
Connection
1. Turn off the Network Device (Game Console, computer,
printer, or any other device).
2. Turn off or unplug the DSL/Cable Modem.
3. Plug in all devices as shown in this illustration. All power
adaptors MUST plug into a 120 VAC, 60 Hz source.
4. The Ethernet Cable from your DSL or Cable Modem
MUST plug into the left Ethernet port on the Base Unit.
5. Ensure that the Slider Switch on the Base Unit is set to
the GAME CONSOLE position.
6. Power up the DSL/Cable Modem -- then power up the
Network Device.
7. GAME ON. Setup is complete.
Base Unit
DSL or
Cable Modem
M
RE
Simple Wireless Setup
OT
OPTIONAL
Power Adaptor
TE
MO
RE
Network Device
Network Device
OTHER CONFIGURATIONS:
Remote Unit
Multiple Net Extenders
OPTIONAL
The best way to understand NYKO's "Wireless
Net Extender" is to view it as an "Invisible Ethernet
Cable".
Refer to the “Simple Wireless Setup”, "Multiple
Netwrok Devices: Sharing a Net Extender" and
"Multiple Net Extenders" illustrations for additional
ways the Wireless Net Extender can be used. Of
course this product can be used in other ways not
shown -- the Wireless Net Extender can replace the
Ethernet cable in any 10Base-T application.
TE
REMO
MO
RE
Remote Unit (3)
Remote Unit (2)
BA
BA
SE
SE
Network Device
Network Device
Base Unit
Personal Computer, Video Game Console, Etc.
Base Unit (3)
SE
BA
Base Unit (2)
MO
RE
Switch set to
GAME CONSOLE
position
BA
SE
Power Adaptor
Remote Unit (1)
DSL or
Cable Modem
OPTIONAL
Network Devices
NOTE: Power Adaptors and Base Unit Slide Switch
close-ups removed for clarity. Slide switches set to Game Console Mode.
Multiple Network Devices:
Sharing a Net Extender
Hub/Router*
Slide Switch
Game Console Mode
10 Base-T
Computer Mode
10/100 Base-T
MO
RE
TE
The Slide Switch on the Base Unit selects either of two modes –
GAME CONSOLE Mode or COMPUTER Mode.
The GAME CONSOLE Mode is the default position for gaming
on the net. This enables the wireless Ethernet link between the
game console and the DSL/Cable Modem. The right Ethernet cable
is disabled.
The COMPUTER Mode turns off the wireless function and
directly connects the left and right cables. This hardwires your
computer, for example, to the DSL/Cable Modem (see Step 2
illustration)
Network Devices
Personal Computer, Video Game Console, Etc.
Base Unit
SE
BA
Remote Unit
Base Unit (1)
TE
MO
RE
LED Indicator
Hub/Router
*Wireless Data Rate will be lower in this case.
DSL or
Cable Modem
No Light: No power.
Blinking Light (1/2 second on; 1/2 second off): Searching for the other
Wireless Net Extender unit.
Solid Light: Solid link established; no data flow.
Flickering Light: The Ethernet connection is active (the faster the flicker,
the faster the data flow).
Hub/
Router
DSL or
Cable Modem
Regulatory Compliance:
FCC Part 15, Industry Canada RSS-210, and cULus
Troubleshooting
Are you having connection problems -- what is the LED doing?
No Light: The Wireless Net Extender unit is not getting power. Check the
unit’s power connections.
Blinking Light (1/2 second on; 1/2 second off) does not turn to solid
or flickering:
•The other Wireless Net Extender unit is not getting power.
•The Net Extender(s) are experiencing too much interference from
another device or the two Net Extenders are too far apart in the
current surroundings. Reorient each unit to face in the general
direction of the other unit (through wall, floor, etc) or change the
location of the two Net Extenders (avoid placing the Net Extenders
close to large metal surfaces or objects, such as metal tables or metal
support pillars).
Solid Light but still no link: The Ethernet cable is not plugged into one (or
both) of the Wireless Net Extender units or other Network Devices.
Flickering Light, however the network connection is not working:
(Do the following until the problem is solved.)
1. Unplug the power to both Wireless Net Extenders for at least 5
seconds, then power up the two Net Extenders again.
2. Turn off or unplug the power to the ADSL/Cable Modem for at least 30
seconds, then power up the ADSL/Cable Modem -- the Network
Device (game console, computer, etc) may need to be rebooted, too.
This usually fixes most Internet related issues.
3. If you have a computer connected to the Base Unit, put the Slide
Switch into Computer Mode. Try to access the Internet from the
computer. If unsuccessful, you may need to reset your IP address.
Refer to the instructions from your Internet Service Provider.
Still no success?
Replace the Wireless Net Extender with an Ethernet Cable to isolate the
problem. If the Ethernet Cable works but the "Wireless Net Extender" does
not:
- go to: http://www.nyko.com/faqs.htm
- or write: support@nyko.com
NYKO Product Limited Warranty
This NYKO product is warranted to the original purchaser for the normal intended use for a
period of ninety (90) days from the date of purchase. If a defect covered under this warranty
occurs, NYKO will replace or repair the product or its defective parts, at its option, at no
charge. Warranty does not apply to defects resulting from modification or misuse of this
product. The product can be returned to the place of purchase accompanied with proof of
purchase or shipped to: NYKO Technologies, Inc., P.O. Box 46697,
Los Angeles, CA 90046 with freight charges prepaid.
Please allow 3-4 weeks for processing.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Modify Date                     : 2003:08:13 20:26:53-06:00
Create Date                     : 2003:08:13 20:16:33-06:00
Creator                         : Adobe Illustrator 10
For                             : Kip,
Title                           : NetX Manual A4 English 1-2.
Bounding Box                    : 17 13 823 576
Creator Version                 : 10
Container Version               : 9
Page Count                      : 2
Creation Date                   : 2003:08:13 20:16:33-06:00
Mod Date                        : 2003:08:13 20:26:53-06:00
Producer                        : Adobe PDF library 5.00
Creator Tool                    : Adobe Illustrator 10.0.1
Metadata Date                   : 2003:08:13 20:26:53-06:00
Image Height                    : 563
Image Width                     : 806
Image Size                      : 806x563
Megapixels                      : 0.454

EXIF Metadata provided by EXIF.tools