OBI Connect FZE MV1 Worldphone User Manual Obi MV1 QSG AR8 12042015

Download:
Mirror Download [FCC.gov]
Document ID	2932561
Application ID	4bDMtfjaJEPaL7GePWBGOg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.41kB (442563 bits)
Date Submitted	2016-03-17 00:00:00
Date Available	2016-03-17 00:00:00
Creation Date	2015-12-04 15:02:45
Producing Software	Adobe PDF library 11.00
Document Lastmod	2016-03-11 10:05:47
Document Title	Obi_MV1_QSG_AR8_12042015
Document Creator	Adobe Illustrator CC 2014 (Macintosh)

Obi QSG (English) – MV1 [formerly known as SJ2.5]
Prepared by Ammunition
AR8 04 December 2015
100% Black
Pantone 1795 C
Crease/folds must be in the
direction of paper grain.
Pantone Cool Gray 8 C
Safety & Precautions
CAUTION
To prevent any damage to the device or any injury to
you, please read the safety information before using
the device.
Battery Model Number: OB2500HI
Rating: 2500mAh, 3.8V, 9.5Wh
Manufacturer: Ningbo Veken Battery Co., Ltd.
No.2, Area 0212, West Zone, Free Trade Zone,
Ningbo, Zhejiang Province, China
• Do not use the device with wet hands.
• Do not use damaged power cords.
• Never try to pull the charger from the cord.
• Avoid using any non-Obi chargers.
• Keep the device dry. Precipitation, humidity, liquids
or moisture can contain minerals that will corrode
the electronic circuits. If your device does get
wet, allow the device to dry completely before
using it. In case of any issues, visit your nearest
Obi Service Centre.
• Do not use or store the device in dusty, dirty areas.
• Do not store the device in extreme heat or
cold temperatures.
• Do not attempt to open the device other than as
instructed in this guide.
• Do not drop, knock, or shake the device.
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the device. Only use
a soft, clean, dry cloth to clean the surface of
the device.
Disassembled Product
Never take your Obi phone apart.
Unauthorized repairs could void your warranty.
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
Around Children
Keep your Obi phone out of children’s reach.
It should never be used as a toy.
Original Accessories
Only use the original accessories supplied
with your Obi phone or those approved by
the manufacturer.
Traffic Safety
Avoid using your Obi phone while driving.
Please follow all safety warnings and
regulations when using your Obi phone.
Do not use the device if doing so causes
danger or interference with other
electronic equipment.
Near Explosives
Turn off mobile devices in or near areas where
flammable or explosive materials are stored
or used.
Emergency Calls
To make an emergency call your Obi phone
must be turned on and in an area where
there’s network coverage. Dial the national
emergency number and press “Send”. Explain
exactly where you are and stay on the call
until help has arrived.
Near Sensitive Electronics
Your phone may cause interference
when used near TVs, radios or automated
office equipment.
While Flying
Mobile devices can cause interference with
aircraft equipment. Please follow all aircraft
and crew regulations, and power off your Obi
phone or select Airplane Mode when directed.
Working Temperature
The working temperature for your Obi phone
is between 0º and 40º C. Using the device
outside of this range may cause malfunction
and lead to long-term damage.
In Medical Facilities
Mobile devices may interfere with the normal
operation of medical equipment. Please follow
all medical facility regulations, and power off
your Obi phone or select Airplane Mode
when directed.
Safe Volume Levels
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
Prolonged exposure to high volume levels
through your handset or ear buds/headset
can damage your hearing. Exposure to high
volumes while driving may cause distraction
and increase your risk of an accident.
At a Fuel Station
It’s not advisable to use mobile devices at
fuel stations.
Specific Absorption Rate (SAR) Information
Your Obi phone is a radio transmitter and receiver.
It has been designed to comply with applicable
safety requirements for exposure to radio waves.
The radio wave exposure guidelines employ a unit of
measurement called Specific Absorption Rate (SAR).
Maximum SAR for this device is as mentioned:
Head SAR: 0.399 Watt/Kg for 10g
Body-worn SAR: 0.908 Watt/Kg for 10g
Head SAR: 0.541 Watt/Kg for 1g
Body-worn SAR: 1.22 Watt/Kg for 1g
• Use your Obi phone when the signal strength is good.
Keep your calls short, use a headset or send a text
message. This advice applies especially to children,
adolescents and pregnant women.
• Polybrominated biphenyls (PBBs) – not over 0.1%
by weight;
• Polybrominated diphenyl ethers (PBDEs) – not over
0.1% by weight.
Some content may differ from your device depending
on the region, service provider, or software version
and is subject to change without prior notice.
Android is a trademark of Google Inc. All trademarks,
logos, mark symbols and offer details mentioned
here are trade names, trademarks or service marks of
their perspective owners. Obi holds no responsibility
of the partner logos and content. All images are for
representation purposes only.
• If you are using a Bluetooth headset device, please
make sure it has a low power emitter.
Proper Disposal
This symbol with or without a solid bar
on the device, batteries, and/or the
packaging, indicates that the device and
its electrical accessories and batteries
should not be disposed of as household
garbage. These items should be taken to
a certified collection point for recycling
or proper disposal.
For the purpose of recycling to facilitate
effective utilization of resources, please
return this product to a nearby authorized
collection centre, registered dismantler
or recycler, or Obi service centre when
disposing of this product.
Getting Started
Environmental Compliances
As per rules laid down by government for
environmental concerns and safety, your device
has been made to comply and conform to the
respective regulations listed below.
The product is in conformity with the requirements
of Rule 13 of e-waste Rules. The content of hazardous
substance with the exception of the applications listed
in SCHEDULE II of the e-waste Rules:
• Lead (Pb) – not over 0.1% by weight;
• Cadmium (Cd) – not over 0.01% by weight;
• Mercury (Hg) – not over 0.1% by weight;
• Hexavalent chromium (Cr6+) – not over 0.1%
by weight;
This model is CE Certified from
Notified Body:
Crease/folds must be in the
direction of paper grain.
0890
Before you get started, please read below:
Charge the Battery
The battery in your Obi phone will need a full charge
before using the device. Make sure to fully charge the
battery before using the device.
Choose a Rate Plan Wisely
Apps or services that send or receive data over a
cellular network can result in additional charges.
Before using your Obi phone, we strongly recommend
you discuss your service plan and data billing rates
with your mobile carrier.
Know About Privacy Laws
Some countries have strict laws about how and when
you can record phone conversations and share your
own or someone else’s personal data. Learn the privacy
laws in your region before you use your phone for any
type of recording, and before sharing personal
information of any kind.
And finally, a few important words from our legal team.
Limitation of Damages
To the maximum extent permitted by applicable
law, in no event shall Obi or its affiliates be liable to
you, any user, or third party for any indirect, special,
consequential, incidental or punitive damages of any
kind, arising in contract, tort, or otherwise, including,
but not limited to, injury, loss of revenue, loss of
goodwill, loss of business opportunity, loss of data,
and/or loss of profits, regardless of the foreseeability
thereof or whether Obi or its affiliates have been
advised of the possibility of such damages. And in
no event shall the total liability of Obi or its affiliates
exceed the amount received from you, regardless
of the legal theory under which the cause of action
is brought.
09
The foregoing does not affect any statutory rights
which may not be disclaimed.
Disclaimer
Thank you for choosing Obi Worldphone MV1 mobile
device. This device is built to provide you with a
high-quality smartphone experience. Please read
this guide carefully and keep it for future use.
10
11
What’s in the Box
Obi Worldphone MV1
Battery
MV1 Overview
Touch Display
Front Camera
Wall Plug
Power/Wake Key
Rear Camera
and Flash
Volume Keys
Micro USB
Connector
• The items supplied with your device and available
accessories may vary depending on your region or
service provider.
14
Installing
Memory Card
Power On/Off &
Basic Operations
You can also use a microSD card in the MV1 to store
extra photos, videos, and music.
Power On
Press the Power/Wake key until your phone vibrates.
When you power on your Obi phone for the first time,
you’ll need to follow the on-screen prompts to set up
your device.
3) Remove the battery, as shown below.
1) Power the phone off before inserting or removing
the microSD card.
4) Place the SIM card(s) into the slots with the
contacts facing down and cut-off corner facing
out, as detailed below.
2) Hold the phone with the touch display facing down.
Use your thumb to remove the battery cover, as
illustrated below.
5) Secure battery and battery cover onto phone.
3) Remove the battery, as shown below.
4) Place the microSD card into the appropriate slot
with the contacts facing down and cut-off corner
facing out, as detailed below.
5) Secure battery and battery cover onto phone.
• Obi is not liable for performance issues or
incompatibilities caused by edited registry
settings or modified operations system software.
• If the device is rooted, it is liable to void its warranty.
01
1) Power the phone off before inserting or removing
SIM cards.
2) Hold the phone with the touch display facing
down. Use your thumb to remove the battery
cover, as illustrated below.
Headset Jack
• Other accessories may not be compatible
with your device; likewise the supplied items
are designed only for your device and may be
incompatible with other devices.
13
Installing SIM Cards
Charging Cable
• The content and pictures in this manual may differ
from the product, or from the software provided
by service providers or carriers, and are subject to
change without prior notice.
• The additional compatible accessories may be
available at nearby retail stores.
12
Power Off
Press and hold the Power/Wake key for a few seconds
and tap Power Off on the touch display.
Standby Mode
To go into standby mode, press the Power/Wake key
once and the display will dim.
To wake from standby mode, press the Power/Wake
key once and the display will illuminate.
Make a Call
There are several ways to make a call from
your Obi phone.
From the Home screen, tap the Phone icon:
1. Use the keypad to enter a number
2. Enter a name or number in the search field
Make one-touch calls:
• From the Recents call log
• From your Contacts
• From the Speed Dial (Favourites)
• From any message or web page containing
a phone number
Messaging
1. From the Home screen, tap “Messaging”
2. Tap “+”
3. Enter a contact name or mobile number in
the “TO” field
4. Tap the area that says “Type message”, and
then enter your message
5. Tap the Send icon at the bottom right of
the screen to send the message, or tap
the Back arrow at the top left corner of
the screen to save the message as a draft
For detailed user manual and specifications
of the phone please log on to
http://www.obiworldphone.com
Fully understand this Quick Start Guide before
using the device.
02
03
04
Dieline: SJ1.5_QuickStartQuide_Rev2_102615
Artwork: MV1_QuickStartQuide
157gsm cover C2S, PP matte lamination (both sides), Z-fold, 5PP max thickness, 3c offset printed
05
06
07
08
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This Worldphone meets the government's requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure the safety of all
persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6
W/kg averaged over one gram of tissue. Device types: Worldphone (FCC ID:
2AGBLMV1) has also been tested against this SAR limit. The highest SAR value
reported under this standard during product certification for use at the ear is
0.637W/Kgand when properly worn on the body is 0.925 W/Kg. This device was tested
for typical body-worn operations with the back of the handset kept5mm from the
body. To maintain compliance with FCC RF exposure requirements, use accessories
that maintain a 5mm separation distance between the user's body and the back of the
handset. The use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be
avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 5mmmust be maintained
between the user’s body and the handset, including the antenna. Third-party belt-clips,
holsters, and similar accessories used by this device should not contain any metallic
components. Body-worn accessories that do not meet these requirements may not
comply with RF exposure requirements and should be avoided. Use only the supplied
or an approved antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2015:12:04 15:02:45-08:00
Creator                         : Adobe Illustrator CC 2014 (Macintosh)
Modify Date                     : 2016:03:11 10:05:47+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : Adobe Illustrator CC 2014 (Macintosh)
Metadata Date                   : 2016:03:11 10:05:47+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 160
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 18341 bytes, use -b option to extract)
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 591.090358
Max Page Size H                 : 362.618198
Max Page Size Unit              : Millimeters
Font Name                       : Arial-Black, FrutigerLTStd-Light, FrutigerLTStd-Roman, GothamRounded-Light, GothamRounded-Book, GothamRounded-Bold, MyriadPro-Regular
Font Family                     : Arial Black, Frutiger LT Std, Frutiger LT Std, Gotham Rounded, Gotham Rounded, Gotham Rounded, Myriad Pro
Font Face                       : Regular, 45 Light, 55 Roman, Light, Book, Bold, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.00.1x, Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 1.002, Version 1.002, Version 1.002, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : Arial Black.ttf, FrutigerLTStd Light.otf, FrutigerLTStd Roman.otf, GothamRounded Light.otf, GothamRounded Book.otf, GothamRounded Bold.otf, MyriadPro Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 8 C, PANTONE 1795 C, Artios_Crease
Swatch Groups Colorants L       : 57.647060
Swatch Groups Colorants A       : 0
Swatch Groups Colorants B       : -2
Swatch Groups Group Name        : Dieline
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: AutoCAD measurements
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 100.000000
Swatch Groups Colorants Magenta : 100.000000
Swatch Groups Colorants Yellow  : 0.000000
Swatch Groups Colorants Black   : 0.000000
Format                          : application/pdf
Title                           : Obi_MV1_QSG_AR8_12042015
Rendition Class                 : proof:pdf
Document ID                     : xmp.did:2f17b9cc-24d5-4477-8dc8-7de88265efa9
Instance ID                     : uuid:d958155d-e24a-484d-91f5-eabf31e8e0d0
Original Document ID            : xmp.did:d4346b72-8c01-45ce-bdf1-be238a4cb761
Derived From Instance ID        : uuid:e8724c18-2ba7-c043-b7a6-f9943d24b6da
Derived From Document ID        : xmp.did:18a950b3-9d1c-4ec6-a8a2-5c8067249305
Derived From Original Document ID: xmp.did:d4346b72-8c01-45ce-bdf1-be238a4cb761
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:d4346b72-8c01-45ce-bdf1-be238a4cb761, xmp.iid:2f17b9cc-24d5-4477-8dc8-7de88265efa9
History When                    : 2015:10:22 19:15:07-07:00, 2015:12:04 15:02:44-08:00
History Software Agent          : Adobe Illustrator CC 2014 (Macintosh), Adobe Illustrator CC 2014 (Macintosh)
History Changed                 : /, /
Producer                        : Adobe PDF library 11.00
Page Count                      : 3
For                             : freelance,
Bounding Box                    : 12 -1022 1660 -11
Container Version               : 11
Creator Version                 : 18

EXIF Metadata provided by EXIF.tools