ODA Electronics REC410 Laser receiver and remote control User Manual REC410 27S V0411 indb

Download:
Mirror Download [FCC.gov]
Document ID	1730477
Application ID	7jX+2qOm/I8w91baeCF+yQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	119.84kB (1498013 bits)
Date Submitted	2012-06-26 00:00:00
Date Available	2012-06-26 00:00:00
Creation Date	2012-06-20 14:10:21
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2012-06-25 11:34:01
Document Title	REC410_27S_V0411.indb
Document Creator	Adobe InDesign CS5 (7.0)
Document Author:	Anthony Su

/ RRR-L
en
Operating instructions
The STABILA REC 410 Line RF is a simple-to-use receiver for the rapid capture
of laser lines. The STABILA REC 410 Line RF can only receive pulse modulated
laser beams. The receiver will not work with rotation lasers. We have endeavoured to explain the unit’s handling and functioning in as clear and comprehensible manner as possible. If, however, you still have any unanswered
questions, we should be pleased to provide advice over the telephone at any
time on the following telephone number:
0049 / 6346 / 309-0
Main components
REC 410
Line RF
(j)
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
ON/OFF
Volume
Accuracy
Automatic precision adjustment
Manual precision adjustment
Laser receiver glass
Display
LED display ( red, yellow, green)
„In line“ marks
(k)
(l)
(m)
(n)
(o)
(p)
Magnet for fixing the receiver
directly to a metal surface
Integrated steel plate to attach
the receiver directly to the
magnet of the bracket
Beeper
Battery compartment cover
Fold-out support for using the
receiver on a flat surface
Vial
Fold-out indicator notch
en
Getting started
Press the ON/OFF button (a). An audio signal, a brief flash from the display
and the LEDs confirm that the receiver is switched on. Press the ON/OFF button (a) quickly once to switch the instrument off. If the instrument is not used,
it will automatically switch itself off after 30 minutes.
9 display steps indicate the divergence from the
centre of the laser line. The central bar indicates the “in line” position of the REC 410 Line RF.
The arrow increases in size as the distance from
the “in line” position increases.
2.50 inch
65 mm
Display
REC 410
Line RF
REC 410
Line RF
REC 410
Line RF
Audio signals
Setting the volume
The volume is increased/decreased by repeatedly pressing the button (b):
Loud (1), out (2) or soft (3). If the instrument is set to “silent” only a short
beep is emitted when the laser beam is received.
(1)
(2)
10
(3)
en
Measuring modes
Accuracy:
Automatic precision adjustment:
Only operates in conjunction with a laser transmitter with the appropriate
features. The precision adjustment
≤ 50 m/164 ft
function can be used, for example, to
align laser lines exactly with the required reference lines, edges, or components. The laser transmitter continues
to rotate automatically until the laser
line is precisely “in line“ with the receiver. Using the remote operation function the laser transmitter can be aligned with the REC 410 Line RF within the
range ¹ 5°*. The receiver must be registered with the laser for this to be possible ( Registration). It is only sensible to use this function if the receiver is
positioned on a flat surface*.
* particularly in conjunction with LA180L
1. Align the laser approximately with the receiver.
2. Precision adjustment can be undertaken in two different operating modes.
A. Semi-automatic
Use the arrow buttons (e) for precision adjustment in the required direction. The laser transmitter will rotate in a single movement in the direction
indicated.
B. Fully automatic
The laser transmitter initially rotates to the limit of the operating range (¹ 5°)
and then moves in the opposite direction until it reaches the position where
the maximum strength of laser signal is received.
B1. Simple mode
The laser transmitter will rotate in a single movement until it reaches the
position where the maximum strength of laser
signal is received.
>2
sec
11
en
B2. Continuous mode
Continuous, independent rotation/ tracking of the
receiver by the laser beam.
>2
sec
Registering the receiver with the laser transmitter
Registering the REC 410 Line RF receiver with the laser transmitter
1. Switch off the laser transmitter (button 1a)
2. Press and hold down buttons (1c) and (1d).
3. Switch on the laser transmitter - (button 1a)
4. The laser transmitter is in registration mode
The LEDs (red and green) flash alternately.
5. Press the button “automatic precision alignment“ (d)
on the REC 410 Line RF receiver.
6. The red and green LEDs on the laser transmitter will flash
3 times for 3 seconds: Âť Registration was successfully completed!
Replacing the batteries
Battery display
Open the battery compartment cover (m) in the
direction of the arrow. Insert new batteries as
indicated by the symbols in the battery compartment. 3 x 1.5V miniature alkaline batteries,
size AA, LR6. Remove the batteries if the receiver will not be used for a long period.
Protective casing
Do not unscrew receiver! Do not submerge into water! Protected against dust
penetration and against water jets (from all directions) according to IP65.
Bracket
(a) Magnet: For securing the receiver.
(b) Reading reference: The edge is “in line“ and can therefore be used
for taking accurate readings on levelling staffs.
12
en
(c) Securing knob. Turning the securing knob fixes/releases the clamp
with the receiver to/from the levelling staff.
(d) Moveable clamping jaw – for fixing to the levelling staff.
Care and maintenance ▸ Cleaning
Please do not remove dust and dirt from the receiving or display window by
using dry cloths or abrasive materials as this procedure scratches the windows. A soft cloth and mild soap and water are effective. The unit can be
cleaned under a tap or with a hose with a low water pressure. Do not use any
other fluids other than water or glass-cleaner, as they may attack polymer
components.
Prohibited Uses
- Operation without instruction.
- Operation other than the intended uses.
- Opening the detector, except the battery compartment.
- Modification or conversion of the detector.
Important information
The person in charge of the detector must understand the instructions in this
manual and ensure other users do also. Periodically carry out test measurements, particularly after the detector has been subjected to abnormal use
and before and after important measurements.
▸ Positioning and adjustment of the instrument:
When setting up the instrument, take care that the laser beam does not produce any unwanted reflections from reflective surfaces. These reflections
may also be captured by the receiver and produce incorrect readings.
Recycling programme for our EU customers:
In accordance with the WEEE regulations, STABILA provides a disposal programme for electronic products at the end of their service
life. For more details, please contact:
0049 / 6346 / 309-0
13
en
Responsibilities
Manufacturer of the product STABILA Messgeräte Gustav Ullrich GmbH hereinafter referred to as STABILA, is responsible for supplying the product,
including the user manual and original accessories, in a completely safe
condition.
Person in charge of the product
The person in charge of the product has the following duties:
To understand the safety instructions on the product and the instructions in
the user manual. To be familiar with local regulations relating to safety and
accident prevention. To inform STABILA immediately if the product and the
application becomes unsafe.
WARNING
The person responsible for the product must ensure that it is used in
accordance with the instructions. This person is also accountable for the training and the deployment of personnel who use the product and for the safety
of the equipment in use.
Hazards of Use
WARNING!
The absence of instruction, or the inadequate imparting of instruction, can
lead to incorrect or adverse use, and can give rise to accidents with farreaching human, material, financial and environmental consequences.
Precautions
All users must follow the safety directions given by the manufacturer and the
directions of the person responsible for the product.
Electromagnetic Compatibility (EMC)
The term Electromagnetic Compatability is taken to mean the capability of
theproduct to function smoothly in an environment where electromagnetic
radiation and electrostatic discharges are present, and without causing electromagnetic disturbances to other equipment.
WARNING
Electromagnetic radiation can cause disturbances in other equipment. Although the product meets the strict regulations and standards which are in
force in this respect, STABILA cannot completely exclude the possibility that
other equipment may be disturbed.
14
en
CAUTION!
Disturbances caused by electromagnetic radiation can result in erroneous
measurements. Although the product meets the strict regulations and standards whichin this respect, STABILA cannot completely exclude the possibility product may be disturbed by very intense electromagnetic radiation, near
radio transmitters, two-way radios or diesel generators.
Precautions
Check the plausibility of results obtained under these conditions.
Technical data
Working radius:
40 31 ft
up to 100 m (328 ft),
Laser dependent
328 ft
100 m
1 ft
13 0 m
Accuracy:
fine:
medium:
wide:
Detectable spectrum:
Acoustic signals:
Batteries:
± 1,0 mm (5/128“)
± 3,0 mm (1/8“)
± 5,0 mm (25/128“)
525 - 700 nm
Loud: 100 dBA, Low: 70 dBA
3 x 1,5V Mignon cells Alkaline,
Size AA, LR6
Yes (LCD symbol)
> 50 hours of receiver operation
+ 1000 activations of the buttons
during remote operation
30 minutes
-10°C to +50°C (14°F to 122°F)
-20°C to +70°C (-4°F to 158°F)
Battery display:
Operating life:
Automatic Shut Off:
Operation temperature range:
Storage temperature range:
Guarantee terms and conditions
STABILA provides a guarantee against deficiencies and faults in the assured
characteristics because of material or manufacturing faults for a period of
24 months from date of purchase. Any faults will be eliminated at STABILA‘s
own discretion either by repairing or replacing the unit. STABILA accepts no
15
en
further claims. No liability is accepted for any faults due to inappropriate
treatment (e.g. damage caused by the unit falling, operation with the wrong
voltage or type of current, use of unsuitable current supply sources) or for
any autonomous changes made to the unit by the purchaser or a third party.
Also no claims under guarantee are accepted for natural wear and tear or any
small faults that do not significantly affect the unit‘s operation. Any guarantee claims must be made via the dealer on the duly completed guarantee
form (see last page) to be returned with the unit.
Notice for Canada
This Class B digital device meets all requirements of Candian Radio Standards Specification RSS-210.
FCC Statement, Applicable in U.S.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
WARNING!
Changes or modifications not expressly approved by the manufacturer for
compliance could void the user’s authority to operate the equipment.
Refer to below web-site for CE details:
www.stabila.de
16
en
further claims. No liability is accepted for any faults due to inappropriate
treatment (e.g. damage caused by the unit falling, operation with the wrong
Canada Statement:
voltage or type of current, use of unsuitable current supply sources) or for
This
complies
withmade
Industry
RSS-210.
Operation
subject
any device
autonomous
changes
to theCanada
unit by the
purchaser
or a thirdisparty.
toAlso
theno
following
two conditions:
(1)accepted
this device
may not
cause
interference,
claims under
guarantee are
for natural
wear
and tear
or any
and
(2)faults
this device
accept anyaffect
interference,
small
that do must
not significantly
the unit‘s including
operation.interference
Any guaranthat
cause
operation
of the
device.
tee may
claims
mustundesired
be made via
the dealer
on the
duly completed guarantee
formdevice
(see last
page)the
to be
returned with
The
meets
exemption
fromthe
theunit.
routine evaluation limits in
section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users
Notice
Canadainformation on RF exposure and compliance.
can
obtainfor
Canadian
This Class B digital device meets all requirements of Candian Radio StanThis Class B digital apparatus complies with Canadian ICES-003.
dards Specification RSS-210.
Cet appareil numĂŠrique de la classe B est conforme Ă  la norme NMB-003
du
Canada.
FCC
Statement, Applicable in U.S.
CANADIAN
CLASS
B STATEMENT:
Thistodigital
device
does
not for
exceed
This equipment
has been
tested and found
comply
with the
limits
the
Class
B limits
for radio
noise
from
set
Class
B digital
device,
pursuant
to emissions
part 15 of the
FCCdigital
Rules.apparatus
These limitsasare
designed
to provide reasonable
protection against
harmful
interference
out
in the interference
causing equipment
standard
entitled
“Digital in
a residentialICES-003
installation.
ThisDepartment
equipment generates,
uses and can radiate
Apparatus,”
of the
of Communications.
radio
frequency
energy and,
if not installed
andde
used
in accordance
with the
Cet
appareil
numerique
respecte
les limites
bruits
radioelectriques
instructions,aux
mayappareils
cause harmful
interference
to radio
applicables
numeriques
de Class
B communications.
prescrites dans Howla norme
ever, there is no guarantee that interference will not occur in a particular inssur le materiel brouilleur.“Appareils Numeriques,” NMB-003 edictee par le
tallation. If this equipment does cause harmful interference to radio or teleministre des Communications.
vision reception, which can be determined by turning the equipment off and
MODIFICATION:
Any changes
orcorrect
modifications
not expressly
approved
on, the user is encouraged
to try to
the interference
by one or
more of by
the
this device could void the user’s authority to operate the
thegrantee
followingofmeasures:
device.
- Reorient or relocate the receiving antenna.
- Increase
the separation
between the
equipment and
Toute
modification
non approuvĂŠ
explicitement
parreceiver.
le fournisseur de
- Connect
the equipment
an outlet
on a circuit
different
from that toĂ 
licence
de l’appareil
peut into
entraĂŽner
l’annulation
du droit
de l’utilisateur
which the
receiver is connected.
utiliser
l’appareil.
- Consult the dealer or an experienced radio/ TV technician for help.
WARNING!
Changes or modifications not expressly approved by the manufacturer for
compliance could void the user’s authority to operate the equipment.
16
17
zh
᪡԰䇈ᯢк
㾯ᗧᇍ5(&  /LQH 5)ᱟа⿽ᘛ䙏᧕᭦◰‫ݹ‬ሴ㓯Ⲵ᧕᭦
ಘˈ᫽֌ㆰ᱃DŽُࣙ5(&/LQH5)ර᧕᭦ಘਚ㜭᧕᭦㾯
ᗧᇍ㓯◰‫ݹ‬ԚਁࠪⲴ㜹ߢᔿ◰‫ݹ‬ሴ㓯ˈᰐ⌅᧕᭦᯻䖜ᔿ◰
‫ݹ‬㓯ʽᡁԜቭਟ㜭␵ᾊ᰾Ҷൠ䈤᰾↔ԚಘⲴ᫽֌઼ᐕ֌৏
⨶DŽྲ᷌ᛘӽ❦䘈ᴹ䰞仈Ⲵ䈍ˈᡁԜ䲿ᰦѪᛘᨀ‫⭥׋‬䈍૘
䈒DŽ⭥䈍ਧ⸱ྲл˖
Ҿ఼‫ܗ‬ӊ
ER 410
Li n
eR
ᔰ‫ޣ‬䭞
丣䟿䭞
㋮ᓖ䭞
㠚ࣘ㋮⺞ሩ߶䭞
᡻ࣘ㋮⺞ሩ߶䭞
◰‫᧕ݹ‬᭦デ
ᱮ⽪デ
/('ᱮ⽪ቿ˄㓒㢢ǃ
 哴㢢ǃ㔯㢢˅
L Āሩ߶āḷ䇠
M ⭘Ҿⴤ᧕പᇊⲴ੨ᤱ⻱䫱
N ࡙⭘⻱ᙗപᇊ൘പᇊཀྵк
 Ⲵаփᔿ䫱ᶯ
O ਁ༠ಘ
P ਁ༠ಘ
Q ⭘Ҿ≤ᒣ㖞᭮ⲴਟኅᔰⲴ
 ᭟ᷦ
R ≤߶ಘ
S ਟኅᔰⲴ⣦ᘱᤷ⽪㕪ਓ
209
zh
䇗䆩
᤹ᔰ‫ޣ‬䭞˄D˅DŽањ༠丣ؑਧԕ৺ᱮ⽪ቿ઼ਁ‫ݹ‬Ҽᶱ
㇑⸝ᲲⲴ䰚Ӟ㺘᰾Ԛಘᐢ᧕䙊DŽ⸝Ჲൠ޽᤹а⅑ᔰ‫ޣ‬䭞
˄D˅ˈ‫ޣ‬䰝ԚಘDŽԚಘ‫࠶⭘ڌ‬䫏ਾ㠚ࣘ‫ޣ‬䰝DŽ
⭘њᱮ⽪㓗࡛ᶕᱮ⽪ࡠ◰‫ݹ‬ሴ㓯
ѝᗳⲴ䐍⿫DŽѝᗳ㓯㺘⽪5(& 
/LQH 5)ⲴĀሩ߶āս㖞DŽ㇝ཤ䲿
оĀሩ߶āս㖞ѻ䰤Ⲵ䐍⿫໎བྷ㘼
ਈབྷDŽ
2.50 inch
65 mm
ᰒ⼎ሣ
ER 410
Li n
eR
REC 410
Line RF
REC 410
Line RF
ໄ䷇ֵো
䷇䞣䇗㡖
䘎㔝᤹ࣘ䭞˄E˅䈳㢲丣䟿˖
ᕪ˄˅ˈ 䶉丣˄˅ ᡆᕡ ˄˅DŽྲ᷌䶉丣ᰦ᧕᭦ࡠҶ
◰‫ݹ‬ሴ㓯ˈਚਁࠪ⸝ᲲⲴа༠૽༠DŽ
(1)
(2)
210
(3)
zh
⌟䞣῵ᓣ
㊒ᑺ
㞾ࡼ㊒⹂ᇍ‫ޚ‬
া᳝ϢⳌᑨ㺙໛ⱘ▔‫ܝ‬Ҿ䖲᥹ᠡ䍋԰⫼DŽ
≤ 50 m/164 ft
࡙⭘㋮⺞ሩ߶࣏㜭ਟԕ㋮⺞ሩ
߶ᐼᵋⲴ৲㘳㓯ǃ৲㘳䗩઼
䜘ԦㅹDŽ◰‫ݹ‬ԚՊ㠚ࣘ᯻䖜ˈ
ⴤࡠ◰‫ݹ‬ሴ㓯㋮⺞Āሩ߶ā᧕
᭦ಘDŽُࣙ䚕᧗࣏㜭ਟԕ൘f
e Ⲵ㤳ത޵䈳㢲◰‫ݹ‬Ԛ֯
ަሩ߶5(&  /LQH 5)DŽѪ
↔ˈ◰‫ݹ‬Ԛᗵ享‫ݸ‬䇶࡛᧕᭦ಘ
˄ϩ䇶࡛˅DŽ䘉亩࣏㜭ਚ൘᧕
᭦ಘ༴Ҿ≤ᒣս㖞ᰦ ᡽ਟᴹ
᭸࡙⭘DŽ ⢩࡛ᱟо/$/㔃ਸ֯⭘
ᇚ▔‫ܝ‬Ҿ㉫⬹ഄᇍ‫᥹ޚ‬ᬊ఼ʽ
㊒⹂䇗ᭈࡳ㛑᳝⾡ϡৠⱘᎹ԰ᮍᓣ
$ञ㞾ࡼ˖
⭘㇝ཤ䭞˄H˅㋮䈳ሩ߶ᡰᐼᵋⲴᯩੁDŽ◰‫ݹ‬Ԛа⅑ᙗ䖜ࣘ
ࡠᤷᇊⲴᯩੁDŽ
%ܼ㞾ࡼ
ᢺ◰‫ݹ‬Ԛ‫ݸ‬䖜ࣘࡠᐕ֌㤳ത˄f e˅Ⲵᴰ㓸ս㖞ˈ❦ਾ
䘶ੁ䘄എࡠ◰‫ݹ‬ሴ㓯᧕᭦䟿ᴰབྷⲴս㖞кDŽ
%ϔ⃵ᗻ῵ᓣ˖
◰‫ݹ‬Ԛа⅑ᙗ䖜ࣘࡠ◰‫ݹ‬ሴ㓯᧕᭦䟿ᴰབྷⲴ
>2
ս㖞кDŽ
sec
%ᣕ㓁ᗻ῵ᓣ˖
ᤱ㔝ൠǃ㠚ࣘൠ֯◰‫ݹ‬ሴ㓯᯻‫ޕ‬ԕ৺ᡆ
㘵ᗞ䈳ሩ߶᧕᭦ಘDŽ
>2
sec
211
zh
▔‫ܝ‬Ҿᇍ᥹ᬊ఼ⱘ䆚߿
◰‫ݹ‬Ԛሩ5(&/LQH5)ර᧕᭦ಘⲴ䇶࡛
 ‫ޣ‬䰝◰‫ݹ‬Ԛ˄䭞D˅
᤹տ䭞˄F˅઼˄G˅
᧕䙊◰‫ݹ‬Ԛ˄䭞D˅
◰‫ݹ‬Ԛ༴Ҿ䇶࡛⁑ᔿDŽ
 ਁ‫ݹ‬Ҽᶱ㇑˄㓒㢢઼㔯㢢˅Ӕᴯ䰚ӞDŽ
൘5(&/LQH5)ර᧕᭦ಘк᤹տ
 Ā㠚ࣘ㋮⺞ሩ߶ā䭞˄G˅DŽ
◰‫ݹ‬ԚкⲴ㓒㢢઼㔯㢢ਁ‫ݹ‬Ҽᶱ㇑䰚Ӟ⅑ˈ
 ⇿⅑。䫏˖ᡀ࣏ᆼᡀ䇶࡛ʽ
᳈ᤶ⬉∴
ᰒ⼎ሣ
᤹㇝ཤᯩੁᢃᔰ⭥⊐ⴂ˄P˅ˈሶᯠ⭥
⊐᤹➗ㅖਧ㻵‫޵ⴂ⊐⭥ޕ‬DŽ[9অ
փ⻡ᙗ⭥⊐ˈ$$ර⭥⊐ˈ/5DŽ䮯ᰦ䰤
н֯⭘ᰦ䈧ਆࠪ⭥⊐ʽ
ֱᡸ໪໇
ֱᡸ໪໇ϡ㽕ᢻᓔʽ䰆ℶ♄ᇬ䖯ܹҾ఼‫ݙ‬DŽ䰆ℶ஋∈
Ң৘Ͼᮍ৥Ϟⱘ 䖯ܹҾ఼‫ݙ‬ʽ
೎ᅮ།
D ⻱䫱˖⭘Ҿപᇊ᧕᭦ಘDŽ
E 䈫ᮠ৲㘳˖䗩䀂սҾĀሩ߶āս㖞ˈ
 ⭘ᶕӾ⍻䟿ᵶк߶⺞䈫ᮠDŽ
F പᇊ㷪ṃ˖䙊䗷᯻䖜ˈ
212
zh
ᢺപᇊཀྵ઼᧕᭦ಘപᇊ൘⍻䟿ᵶкᡆᶮᔰDŽ
G ਟ〫ࣘⲴཀྵඇ˖⭘Ҿപᇊ൘⍻䟿ᵶкDŽ
ֱ‫ݏ‬੠㓈ᡸ
⏙⋕
нᗇ֯⭘ᒢᣩᐳᡆ␵⌱ࡲᶕ␵⨶᧕᭦ᡆᱮ⽪デкⲴ⚠ቈ઼
㜿⢙ˈ੖ࡉՊ൘デਓк⮉л࡞ⰅDŽᡁԜᔪ䇞֯⭘Ḅ䖟Ⲵᣩ
ᐳˈѝᙗ␵⌱ࡲ઼≤ᶕ䘋㹼␵⨶DŽਟԕ൘≤嗉ཤлߢ⍇Ԛ
ಘˈᡆ⭘≤㇑൘վ≤঻лߢࡧʽнᗇ֯⭘䲔Ҷ≤ᡆ⧫⪳␵
⌱ࡲԕཆⲴަᆳ⏢փˈഐѪ੖ࡉՊᦏൿກᯉ㺘䶒DŽ
ϡ‫ܕ‬䆌ⱘՓ⫼㣗ೈ
⋑ᴹᤷሬⲴᛵߥл䘋㹼֌ъ
֯⭘ⴞⲴѻཆⲴᓄ⭘
ᢃᔰ᧕᭦ಘˈਆࠪ⭥⊐ⴂ
᭩ਈᡆ᭩䙐ӗ૱
䇈ᯢ
 ᫽֌᧕᭦ಘⲴӪઈˈᗵ享һ‫ݸ‬䙊䈫઼⨶䀓䈤᰾ҖѝⲴ䈤
᰾ˈ൘ሶԚಘӔԈ࡛Ӫ֯⭘ᰦ㾱⌘᜿ˈަԆӪҏ㾱䘉ṧ
‫ڊ‬DŽ
ᇊᵏ䘋㹼䈳ṑᡆỰ⍻⍻䟿ˈ⢩࡛ᱟ൘нᒣᑨⲴ㢠㤖ᶑԦл
֯⭘ਾˈԕ৺䟽㾱Ⲵ⍻䟿ࡽਾDŽ
◰‫ݹ‬ԚⲴ᭮㖞઼䈳㢲˖
൘᭮㖞◰‫ݹ‬Ԛᰦ㾱⌘᜿ˈ൘৽‫Ⲵݹ‬㺘䶒༴нᗇӗ⭏ᴹ⺽֌
ъⲴ৽‫ˈݹ‬ഐѪ䘉Ӌ৽‫ݹ‬ҏՊ㻛᧕᭦ಘ᧕᭦ˈӾ㘼ሬ㠤ᱮ
⽪䭉䈟ʽ
ᇍ⃻ⲳᅶ᠋ⱘಲᬊ᳡ࡵ
㾯ᗧᇍ൘Ԛಘ֯⭘ሯભ㔃ᶏਾ᤹➗:(((˄‫ޣ‬Ҿᣕᓏ
⭥ᆀ⭥ಘ䇮༷ᤷԔ˅Ⲵ㿴ᇊᨀ‫⭥׋‬ᆀӗ૱Ⲵᓏᔳ༴
⨶ᴽ࣑DŽᴤཊؑ᚟䈧૘䈒˖
213
zh
䋷ӏ㣗ೈ
㾯ᗧᇍ⍻䟿Ԛ‫ޜ‬ਨˈㆰ〠㾯ᗧᇍˈ䍏䍓‫׋‬ᓄᆹ‫ޘ‬ᢰᵟᆼྭ
ⲴԚಘˈवᤜ֯⭘䈤᰾᡻޼઼৏㻵䱴ԦDŽ
䋷ӏҎ
Ҿ఼䋷ӏҎ᳝ϟ߫Нࡵ˖
⨶䀓ӗ૱кⲴ‫؍‬ᣔؑ᚟઼⭘ᡧ᡻޼ѝⲴᤷሬ䈤᰾DŽ⟏ᚹᖃ
ൠ઼ԱъⲴᆹ‫઼ޘ‬һ᭵䱢㤳㿴ᇊDŽྲ᷌Ԛಘᡆ൘ԚಘⲴ֯
⭘ѝࠪ⧠ᆹ‫ޘ‬䰞仈ˈ䈧・ণ䙊⸕㾯ᗧᇍ‫ޜ‬ਨDŽ
䄺ਞʽ
ԚಘⲴ䍓ԫӪᗵ享᤹➗䈤᰾֯⭘Ԛಘˈᓄ䍏䍓ަ֯⭘Ӫઈ
Ⲵᣅ‫ޕ‬৺ᤷሬԕ৺ԚಘⲴ᫽֌ᆹ‫ޘ‬DŽ
Փ⫼Ёⱘॅ䰽
䄺ਞʽ
ᰐ᫽֌ᤷሬᡆ᫽֌ᤷሬнᆼ༷ਟ㜭ሬ㠤᫽֌᭵䳌ᡆ䘍㿴֯
⭘ˈӾ㘼䙐ᡀѕ䟽ⲴӪ࣋ǃ⢙࣋ǃ䍒࣋ᦏཡ઼⧟ຳ⹤ൿDŽ
䰆⊏᥾ᮑ
ᡰᴹⲴ֯⭘㘵ᗵ享䚥ᗚ⭏ӗল୶Ⲵᆹ‫ޘ‬㿴ᇊ઼Ԛಘ䍓ԫӪ
ⲴᤷሬDŽ
⬉⺕‫ݐ‬ᆍᗻ (0&
⭥⻱ެᇩᙗᱟᤷԚಘ൘ࠪ⧠⭥⻱䗀ሴ઼᭮⭥Ⲵ⧟ຳл↓⺞
ᐕ֌㘼нሩަᆳ䇮༷䙐ᡀᒢᢠⲴ㜭࣋DŽ
䄺ਞ
⭥⻱䗀ሴ㜭ཏሩަᆳ䇮༷䙐ᡀᒢᢠDŽ㲭❦ᵜӗ૱൘䘉ᯩ䶒
┑䏣⴨‫ޣ‬ᤷԔ઼ḷ߶ⲴѕṬ㾱≲ˈն㾯ᗧᇍԚಘӽ❦нᆼ
‫ᧂޘ‬䲔ሩަԆԚಘ䙐ᡀᒢᢠⲴਟ㜭DŽ
ᇣᖗʽ
⭥⻱䗀ሴᕅ䎧Ⲵᒢᢠ㜭䙐ᡀ⍻䟿ᡀ᷌ᴹ䈟DŽ㲭❦ᵜӗ૱൘
䘉ᯩ䶒┑䏣⴨‫ޣ‬ᤷԔ઼ḷ߶ⲴѕṬ㾱≲ˈն㾯ᗧᇍԚಘӽ
❦нᆼ‫ᧂޘ‬䲔㻛ᕪ⭥⻱䗀ሴ˄ྲ䶐䘁ᰐ㓯⭥ᒯ᫝ਁሴਠǃ
ᰐ㓯⭥䙊䈍㻵㖞ǃḤ⋩ਁ⭥ᵪㅹ˅ᒢᢠⲴਟ㜭DŽ
214
zh
䰆⊏᥾ᮑ
ྲ᷌൘䘉ӋᶑԦл䘋㹼⍻䟿ˈ䴰Ựḕ⍻䟿㔃᷌Ⲵ↓⺞ᙗDŽ
ᡔᴃখ᭄
ᴰ䎯P IW ˈ
ਆߣҾ◰‫ݹ‬
40 31 ft
ᐕ֌ॺᖴ˖
328 ft
100 m
1 ft
13 0 m
㋮ᓖ˖
 ㋮㓶˖
 ѝㅹ
 ㋇㌉
᧕᭦㤳ത˖
༠丣ؑਧ˖
⭥⊐
⭥⊐ᱮ⽪
⭥⊐Ⲵ֯⭘ᵏ
㠚ࣘ‫ޣ‬ᵪ
ᐕ֌⑙ᓖ
ᆈ᭮⑙ᓖ
fPP Ā
fPP Ā
fPP Ā
QP
ᕪG%$ᕡG%$
[9অփ⻡ᙗ⭥⊐
$$ර⭥⊐ˈ/5
ᴹ˄/&'ㅖਧ˅
! ਟ‫᧕׋‬᭦ಘᐕ֌䎵䗷њ
ሿᰦ䚕᧗⅑᤹䭞᫽֌
࠶䫏
e&e&
e)e)
e&e&
e)e)
ֱׂᴵӊ
⭡Ҿᶀᯉᡆ⭏ӗ㕪䲧䙐ᡀԚಘᓄᴹⲴᙗ㜭ࠪ⧠㕪䲧ᡆᐞ
䭉ˈ㠚䍝Ҡѻᰕ䎧њᴸ޵ˈ㾯ᗧᇍ䍏䍓‫؞؍‬DŽᡁԜỰḕ
ṨᇎਾˈሩԚಘ䘋㹼᭩䘋ᡆ䈳ᦒˈԕ⎸䲔䘉Ӌ㕪䲧DŽަᆳ
㍒䎄㾱≲ˈ㾯ᗧᇍᾲн᧕ਇDŽ⭡Ҿн᤹᫽֌㿴〻֯⭘Ԛಘ
215
zh
䙐ᡀⲴ㕪䲧˄ֻྲ⭡Ҿඐ㩭ǃ֯⭘нਸ䘲Ⲵ⭥঻⭥⍱ᯩ
ᔿˈ֯⭘нਸ䘲Ⲵ⭥Ⓚ䙐ᡀⲴᦏൿ˅ԕ৺⭡⭘ᡧᡆㅜй㘵
㠚㹼᭩ࣘԚಘ㘼䙐ᡀⲴ㕪䲧ˈᵜলᾲн䍏䍓DŽ਼ṧˈሩҾ
㠚❦⼘ᦏԕ৺ሩԚಘ࣏㜭⋑ᴹᵜ䍘ᖡ૽Ⲵሿ㕪䲧ˈᵜলҏ
нҸ‫؞؍‬DŽྲ⺞ᇎ኎‫؞؍‬㤳തˈ䈧ປྭ‫؞؍‬অ˄㿱ᴰਾа
亥˅઼Ԛಘа䎧䘱Ӕ䬰୞୶DŽ
以下网站可查询有关CE 认证详情:
www.stabila.de
216
zh
217
Adresse:
Address:
Adresse:
Indirizzo:
DirecciĂłn:
Kunde:
Customer:
Client:
Cliente:
Cliente:
rf
Händler (Stempel, Unterschrift):
Dealer (stamp, signature):
Concessionnaire (cachet, signature):
Rivenditore (timbro, firma):
Comerciante (sello y firma):
Kaufdatum:
Purchase date:
Date d‘achat:
Data di acquisto:
Fecha de compra:
Bon de garantie pour STABILA REC 410 Line RF
it Certificato di garanzĂ­a per il REC 410 Line RF STABILA
es Certificado de garantĂ­a para el REC 410 Line RF de STABILA
de Garantieschein fĂźr STABILA REC 410 Line RF
en Guarantee form for STABILA REC 410 Line RF
218
Adres:
Endereço:
Adresse:
Osoite:
Adresse:
Klant:
Cliente:
Kunde:
Asiakas:
Kunde:
Leverancier (stempel, handtekening):
Loja (carimbo, assinatura):
Forhandler (Stamp, Underskrift):
Myyjä (leima, allekirjoitus):
Forhandler (stempel, underskrift):
Koopdatum:
Data da compra:
Kjøpsdato:
Ostopäivämäärä:
Købsdato:
Garantiseddel for STABILA REC 410 Line RF
fi Takuulomake laitteelle STABILA REC 410 Line RF
da Garantibevis til STABILA REC 410 Line RF
ln Garantiebewijs voor STABILA REC 410 Line RF
t CartĂŁo de garantia para o STABILA REC 410 Line RF
219
Adress:
Adres:
Adresa:
Adresa:
Adres:
Kund:
Müșteri:
ZĂĄkaznĂ­k:
ZĂĄkaznĂ­k:
Klient:
Återförsäljare (stämpel, signatur):
Yetkili Bayii (Kaşe, İmza):
ObchodnĂ­k:
Predajca (pečiatka, podpis):
Punkt sprzedaĹźy (stempel, podpis):
KĂśpdatum:
SatÄąn Alma Tarihi:
Datum nĂĄkupu:
DĂĄtum nĂĄkupu:
Data zakupu:
sk Zåru¢ný list pre STABILA REC 410 Line RF
lp Karta gwarancyjna dla STABILA REC 410 Line RF
cs Zåru¢ní list pro STABILA REC 410 Line RF
sv Garantiformulär fÜr: STABILA REC 410 Line RF
rt STABILA REC 410 Line RF Garanti Belgesi
220
Naslov:
Adresa:
CĂ­m:
Adresa:
Διεύθυνση:
Stranka:
Kupac ime i prezime:
Vevő:
Client:
Πελάτης:
Trgovec (Ĺžig, podpis):
Pečat i potpis prodavaoca:
Kereskedő (pecsét, aláírás):
Distribuitor (stampila, semnatura)
Έμπορος (Σφραγίδα, Υπογραφή):
Datum nakupa:
Datum prodaje:
A vĂĄsĂĄrlĂĄs dĂĄtuma:
Data cumparare:
Ημερομηνία αγοράς:
h Garancia jegy a STABILA REC 410 Line RF tĂ­pusĂş kĂŠszĂźlĂŠkhez
r Formular de garantie pentru STABILA REC 410 Line RF
el Εγγύηση για STABILA REC 410 Line RF
ls Garancija za linijski sprejemnik STABILA REC 410 Line RF
r Jamstveni list STABILA REC 410 Line RF
221
ओકਚ
Адрес клиента/покупателя:
Adres:
Aadress:
Adresas:
ओභ঻੡
Клиент/покупатель:
Klients:
Klient:
Pirkėjas:
Продавец (штамп, подпись):
Dileri (Zimogs, Paraksts):
Mßßja (tempel, allkiri):
Predajca (pečiatka, podpis):
ओභো঩
Дата покупки:
Pirkuma datums:
Ostu kuupäev:
Pirkimo data:
tl Garantinis talinas aparatui: STABILA REC 410 Line RF
j STABILA REC 410 Line RF
et Garantii seadmele: STABILA REC 410 Line RF
ru Гарантийное свидетельство для STABILA REC 410 Line RF
lv Garantija priekĹĄ STABILA REC 410 RF Line
222
ൠ൰˖
࣯‫ܕ‬
䍝Ҡᰕᵏ˖
ᇒᡧ˖
࠶䬰୶˄ㆮᆇˈⴆㄐ˅˖
˱ࢎΤज
˱֐ࢉ
ko
STABILA REC 410 Line RF
z 䍘‫؍‬Җ STABILA REC 410 Line RF
223

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 26
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 6.0 (Windows)
Trapped                         : False
GTS PDFX Version                : PDF/X-3:2002
GTS PDFX Conformance            : PDF/X-3:2002
Create Date                     : 2012:06:20 14:10:21+08:00
Metadata Date                   : 2012:06:25 11:34:01+01:00
Modify Date                     : 2012:06:25 11:34:01+01:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 3003 bytes, use -b option to extract), (Binary data 8296 bytes, use -b option to extract)
Instance ID                     : uuid:488ec858-1474-45c6-860f-bffc32791d92
Document ID                     : xmp.did:C50F173C9269E011ABC0E79789BB4462
Original Document ID            : xmp.did:27AFF37A660BE0118C619DB79CDE6D0F
Rendition Class                 : proof:pdf
Version ID                      : 1
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:27AFF37A660BE0118C619DB79CDE6D0F, xmp.iid:28AFF37A660BE0118C619DB79CDE6D0F, xmp.iid:29AFF37A660BE0118C619DB79CDE6D0F, xmp.iid:2AAFF37A660BE0118C619DB79CDE6D0F, xmp.iid:2BAFF37A660BE0118C619DB79CDE6D0F, xmp.iid:2CAFF37A660BE0118C619DB79CDE6D0F, xmp.iid:2DAFF37A660BE0118C619DB79CDE6D0F, xmp.iid:2EAFF37A660BE0118C619DB79CDE6D0F, xmp.iid:2FAFF37A660BE0118C619DB79CDE6D0F, xmp.iid:30AFF37A660BE0118C619DB79CDE6D0F, xmp.iid:05CE48D3730BE0118C619DB79CDE6D0F, xmp.iid:06CE48D3730BE0118C619DB79CDE6D0F, xmp.iid:07CE48D3730BE0118C619DB79CDE6D0F, xmp.iid:08CE48D3730BE0118C619DB79CDE6D0F, xmp.iid:5A388045AB11E011B4E88F5F624B124C, xmp.iid:5B388045AB11E011B4E88F5F624B124C, xmp.iid:5C388045AB11E011B4E88F5F624B124C, xmp.iid:7848A4666528E011931AA9BB64C8A75E, xmp.iid:7E48A4666528E011931AA9BB64C8A75E, xmp.iid:8048A4666528E011931AA9BB64C8A75E, xmp.iid:599BCA0C6628E011931AA9BB64C8A75E, xmp.iid:5A9BCA0C6628E011931AA9BB64C8A75E, xmp.iid:5B9BCA0C6628E011931AA9BB64C8A75E, xmp.iid:5C9BCA0C6628E011931AA9BB64C8A75E, xmp.iid:5D9BCA0C6628E011931AA9BB64C8A75E, xmp.iid:609BCA0C6628E011931AA9BB64C8A75E, xmp.iid:ACDDF1026C28E011931AA9BB64C8A75E, xmp.iid:62E212F8C748E011829C996AF8EFF21D, xmp.iid:65E212F8C748E011829C996AF8EFF21D, xmp.iid:8828E753CE48E011829C996AF8EFF21D, xmp.iid:8C28E753CE48E011829C996AF8EFF21D, xmp.iid:8D28E753CE48E011829C996AF8EFF21D, xmp.iid:9128E753CE48E011829C996AF8EFF21D, xmp.iid:1D345FA1D148E011829C996AF8EFF21D, xmp.iid:0B14DC18D248E0119B6592DE89096130, xmp.iid:88DCCABB8249E011AF18D304B6CD909F, xmp.iid:3E68EE688449E011AF18D304B6CD909F, xmp.iid:07B539718549E011AF18D304B6CD909F, xmp.iid:625C4BDD8549E011AF18D304B6CD909F, xmp.iid:71519FDE8C49E011AF18D304B6CD909F, xmp.iid:DCD38AFC8C49E011AF18D304B6CD909F, xmp.iid:FDA725CC9049E011AF18D304B6CD909F, xmp.iid:FDB51E8F9849E011AF18D304B6CD909F, xmp.iid:FC1A85F59849E011AF18D304B6CD909F, xmp.iid:F5BEFB9D7050E01198CAF7A32B52BC5A, xmp.iid:587238346866E0118CE2B7645788CC81, xmp.iid:487BD5476866E0118CE2B7645788CC81, xmp.iid:63F7F33B9269E011ABC0E79789BB4462, xmp.iid:C50F173C9269E011ABC0E79789BB4462
History When                    : 2010:12:19 12:52:39+01:00, 2010:12:19 12:55:34+01:00, 2010:12:19 12:55:34+01:00, 2010:12:19 13:31:59+01:00, 2010:12:19 13:38:09+01:00, 2010:12:19 13:48:20+01:00, 2010:12:19 13:52:11+01:00, 2010:12:19 13:56:50+01:00, 2010:12:19 14:13:59+01:00, 2010:12:19 14:26:32+01:00, 2010:12:19 14:28:11+01:00, 2010:12:19 14:36:22+01:00, 2010:12:19 14:57:20+01:00, 2010:12:19 15:03:47+01:00, 2010:12:27 12:23:40+01:00, 2010:12:27 12:23:40+01:00, 2010:12:27 12:25:45+01:00, 2011:01:25 10:27:59+01:00, 2011:01:25 10:31:04+01:00, 2011:01:25 10:32:38+01:00, 2011:01:25 10:32:38+01:00, 2011:01:25 10:34:40+01:00, 2011:01:25 10:34:40+01:00, 2011:01:25 10:42:55+01:00, 2011:01:25 10:58:32+01:00, 2011:01:25 10:58:32+01:00, 2011:01:25 11:15:19+01:00, 2011:03:07 16:06:10+01:00, 2011:03:07 16:06:10+01:00, 2011:03:07 16:19:42+01:00, 2011:03:07 16:38:16+01:00, 2011:03:07 16:41:56+01:00, 2011:03:07 16:42:15+01:00, 2011:03:07 16:43:27+01:00, 2011:03:07 16:46:41+01:00, 2011:03:08 13:51:06+01:00, 2011:03:08 14:03:06+01:00, 2011:03:08 14:10:30+01:00, 2011:03:08 14:13:31+01:00, 2011:03:08 15:03:40+01:00, 2011:03:08 15:04:30+01:00, 2011:03:08 15:31:47+01:00, 2011:03:08 16:27:20+01:00, 2011:03:08 16:30:12+01:00, 2011:03:17 09:29:03+01:00, 2011:04:14 09:24:16+02:00, 2011:04:14 09:24:48+02:00, 2011:04:18 10:02:41+02:00, 2011:04:18 10:02:41+02:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata
Derived From Instance ID        : xmp.iid:63F7F33B9269E011ABC0E79789BB4462
Derived From Document ID        : xmp.did:65E212F8C748E011829C996AF8EFF21D
Derived From Original Document ID: xmp.did:27AFF37A660BE0118C619DB79CDE6D0F
Derived From Rendition Class    : default
Doc Change Count                : 1098
Format                          : application/pdf
Title                           : REC410_27S_V0411.indb
Creator                         : Anthony Su
Author                          : Anthony Su

EXIF Metadata provided by EXIF.tools