OKAYO Electronics DLH-9 Digital Handheld Microphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4150259
Application ID	BCpUf0mlOMQW71TfvC3rcQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	108.79kB (1359932 bits)
Date Submitted	2019-01-29 00:00:00
Date Available	2019-02-01 00:00:00
Creation Date	2018-07-23 13:30:19
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2019-01-24 17:19:36
Document Title	User Manual
Document Creator	Acrobat PDFMaker 11 Word 版
Document Author:	陳芷瑩

Wireless ENG / EFP System

Dual-Antenna Receiver

Bodypack Transmitter

Handheld Microphone
Manufacturer’s Declaration
This product meets the following standards:
 Federal Communications Commission Interference Statement
 Europe – EU Declaration of Conformity
This device complies with Directive 2014/53/EU issued by the Commission
of the European Community.
 WEEE Statement
Electrical and electronic equipment
must be disposed of at the end of their
lifespan separately from household waste.
Please dispose of this equipment at your local
waste collection or recycling center. Please help to
protect our environment.
 Safety and Electromagnetic Emissions Certificates
Standard Compliance
 RoHs compliant
 European Directive 2011/65/EU
Certificates
 CE
 FCC
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device was tested for typical lap held operations
with the device contacted directly to the human body to the back side of the
notebook computer. To maintain compliance with FCC RF exposure compliance
requirements, avoid direct contact to the transmitting antenna during
transmitting.
SAR information
0.256 W/kg@1g (body)
Table of contents
p. 1 ~ p. 4
Quick start
p. 5
Package
p. 6 ~ p. 8
Illustration
p. 9 ~ p. 11

Dual-Antenna Receiver

Bodypack Transmitter

Handheld Microphone
Operation

Inserting batteries

Powering on

Adjusting channels manually

Checking frequency of selected channel

Tuning volume to appropriate level

Connecting correctly to camera or recording
device

p. 12 ~ p. 17
Powering off
Advanced operation

Finding clean channels

Pairing receiver and transmitter automatically

Adjusting settings

Back to default
p. 18
Troubleshooting (Not ready yet)
p. 19
Specification (Not ready yet)
WIRELESS ENG / EFP SYSTEM
 Quick start
Step. 1
Insert 2 supplied AA batteries into receiver, transmitter and microphone.
Step. 2
Press and hold the power button for 1 second to turn receiver, transmitter
or microphone on.
Step. 3
Receiver:
1. Press and hold the set button for 1 second until backlit screen turns to
white and channel number A flashes.
2. Press  or  button to select preferred channel A and press the set
button to confirm.
3. Channel number B will start to flash after above selection of channel A is
done.
4. Press  or  button to select preferred channel B and then press the set
button to confirm.
5. The receiver will be back to home screen after above selection of 2
channels are completed.
WIRELESS ENG / EFP SYSTEM
Bodypack Transmitter:
Press and hold the set button for 1 second until backlit screen turns to
white and channel number flashes. Press  or  button to select
preferred channel on receiver and transmitter. Press the set button again
to confirm newly selected channel.
Handheld Microphone:
Press and hold  or  button for 1 second until backlit screen turns to
white and channel number flashes. Press  or  button to select
preferred channel on microphone. The newly selected channel will
automatically be confirmed after being idled for 2 seconds.
Make sure both receiver and transmitter are set at same channel for
correct communication.
WIRELESS ENG / EFP SYSTEM
Step. 4
Connect one of supplied cable from LINE OUT jack on receiver to camera
or recording device.
Receiver with
1/8” / XLR cable
or
Receiver with
1/8” / 1/8” cable
Antennas of Receiver are recommended to be sloped at a 45degree angle as shown below to make sure best operation range.
45°
Step. 5
Connect headphone to the receiver worn by the photographer whereas
supplied lapel microphone to the transmitter or handheld microphone
carried by the host.
WIRELESS ENG / EFP SYSTEM
Step. 6
Tune the headphone and microphone volume to desired level for most
appropriate operation.
Warning!
Kindly note listening at high volume for long periods may damage your
hearing.
WIRELESS ENG / EFP SYSTEM
 Package
Standard

1 dual-antenna receiver

2 bodypack transmitter

2 lapel microphone LM-95C

1 shoe adapter SM-9

1 1/8” to XLR connecting cable

1 1/8” to 1/8” connecting cable

6 AA alkaline batteries
Optional
transmitter

Handheld microphone
WIRELESS ENG / EFP SYSTEM
 Illustration
Dual-Antenna
Receiver









11

 Dual bendable whip antenna
 Line (Aux) – Out jack
 Headphone jack
 Rx LED indicator
 Set button
 Power button
 Backlit screen
 Talk/Mute status
of transmitter A
 Custom ID
(max. 4 codes)
 Sound quality
 Talk/Mute status
of transmitter B
 Battery status of
receiver
 Signal status of
transmitter A
 Signal status of
transmitter B
 Channel number
of transmitter A
 Channel number
of transmitter B
 Up  / Down  button
 Shoe adapter SM-9
 Belt clip
11 Charging port
WIRELESS ENG / EFP SYSTEM
Bodypack Transmitter

  






11
 Whip antenna
 XLR Microphone jack
 Talk / Mute switch
 Line (Aux) – In jack
 Tx / Talk LED indicator
 Set button
 Power button
 Backlit screen
 Frequency code
 Battery status
 Talk/Mute status
 RF power
 Sound quality
 Mic gain
 Channel number
 Up  / Down  button
 Belt clip
11 Charging port
WIRELESS ENG / EFP SYSTEM
Handheld microphone
optional








 Dynamic capsule
 Talk / Mute button
 Backlit screen
 Frequency code
 Battery status
 Talk mode
 RF power
 Sound quality
 Mic gain
 Channel number
 Charging port
 Left / Right button
 Power button
 Battery compartment
 Battery cover
WIRELESS ENG / EFP SYSTEM
 Operation
Inserting batteries
Powering on
Insert 2 AA alkaline or Ni-MH rechargeable batteries into battery
compartment of receiver, transmitter or handheld microphone.
Do not mistakenly recharge alkaline batteries via charging cable
on the device. Okayo will accept no liability for any potential
damage due to misuse charging behavior.
Press and hold the power button for 1 second to turn the
device on.
Adjusting channels Bodypack Transmitter:
1. Press and hold the set button for 1 second until the backlit
manually
screen turns to white and channel number flashes.
2. Press  or  button to select preferred channel.
3. Once newly selected channel is determined, press the set
button again to confirm the selection. New channel stops
flashing and backlit screen is back to orange.
Handheld Microphone:
1. Press and hold  or  button for 1 second until the backlit
screen turns to white and channel number flashes.
2. Press  or  button to select preferred channel.
3. Newly selected channel will be confirmed after microphone
is idled for 2 seconds. New channel stops flashing and backlit
screen is back to orange.
Checking frequency
of selected channel
Receiver
Short press the set button to check the frequency of selected
channel.
WIRELESS ENG / EFP SYSTEM
Bodypack
Transmitter
Short press the set button to check the frequency of selected
channel.
Handheld
Microphone
Short press  or  button to check the frequency of selected
channel.
Tuning volume to
appropriate level
Receiver
Short press the  button to increase volume of channel A but
decrease that of channel B and vice versa.
Bodypack
Transmitter
1. Press and hold both set and power buttons simultaneously
to turn the transmitter on and enter the “setting” mode.
2. Press  or  button to scroll the options. Find “MIC GAIN”
and press the set button again.
3. Default mic gain Mid shows up. Press  or  button to
define preferred level. Press the set button to confirm and
leave the setting of MIC GAIN.
4. To leave the “setting” mode, press  or  button to find
“EXIT” and press the set button again.
Handheld
Microphone
1. Press and hold both  and power buttons simultaneously to
turn the microphone on and enter the “setting” mode.
2. Press  or  button to scroll the options. Find “MIC GAIN”
and press the power button again.
10
WIRELESS ENG / EFP SYSTEM
3. Default mic gain Mid shows up. Press  or  button to
define preferred level. Press the power button to confirm
and leave the setting of MIC GAIN.
4. To leave the “setting” mode, press  or  button to find
“EXIT” and press the power button again.
Kindly note listening at high volume for long periods may damage
your hearing.
Connecting
correctly to
camera or
recording device
Receiver
1. Mount the receiver on the camera or recording device via
shoe adapter SM-9.
2. Connect supplied 1/8”to XLR or 1/8” to 1/8” cable (upon
preference) to camera or recording device.
3. Connect headphone with the phone jack on the receiver.
Transmitter
Connect supplied lapel microphone with the phone jack on the
transmitter.
Make sure both receiver and transmitter are at same
channel for correct communication.
Powering off
Press and hold the power button for 2 seconds to turn the
device off.
Charging via a
micro-USB cable
Device will be off automatically when being connected with a
micro-USB cable for battery charging.
The micro-USB cable will not be a charging but a power-supply
cable if device is manually turned on afterwards.
11
WIRELESS ENG / EFP SYSTEM
 Advanced operation
Finding clean
channels
(SCAN mode)
1. Press and hold both  and power button simultaneously to turn
the receiver on .
2.
shows up. The receiver is at “SCAN” mode. Please wait
for appr. 20 seconds until receiver finds clean channels.
3. When clean channels are found, the receiver will leave the SCAN
mode and be back to home screen automatically.
Pairing receiver 1. Short press the power button again when the receiver is on.
and transmitter
automatically
(SYNC mode)
Pair 1st
transmitter
2. Firstly, “SYNC” shows up on top of channel A which means the
receiver is waiting for being paired. Turn 1st transmitter on within
20 seconds.
pairing
12
Receiver
1st Transmitter
WIRELESS ENG / EFP SYSTEM
Pair 2nd transmitter
3. After 1st transmitter is paired, “SYNC” will show up on top of
channel B. Turn 2nd transmitter on within 20 seconds.
pairing
Receiver
Pairing is done
2nd Transmitter
4. When two pairing jobs are done, the receiver will leave SYNC
mode and be back to home screen automatically.
Pairing completed!
13
WIRELESS ENG / EFP SYSTEM
Adjusting settings
(SETTING mode)
1. Press and hold both set and power buttons simultaneously
to turn the receiver module on.
Receiver
2. “Setting” mode will be entered successfully for custom
adjustments.
3. Press  or  button to scroll options. See setting menu
below..
 Quality
This refers to sound quality of the receiver.
 HQ: Higher
 Q (default): Regular
Note: Only HQ is available in 902~928MHz.
 Squelch
This refers to signal quality of the receiver. The better the
signal quality, the shorter the operation range.
 Hi: Operation range will be shorter.
 Lo (default): Operation range will be greater.
 Output level
 LINE (default)
 MIC
 Channel output
 A+B (default): Both transmitter A and B will be heard.
 A/B: Either transmitter A or B will be heard.
 Receiver mode
 Dual Rx (default)
 Single Rx
 Exit
4. Press the set button again to confirm the selection and leave
the setting..
5. To leave the SETTING mode, find “EXIT” on the menu and
press the set button.
14
WIRELESS ENG / EFP SYSTEM
Transmitter
1. Press and hold both set and power buttons simultaneously
to turn the transmitter on.
2. “Setting” mode will be entered successfully for custom
adjustments.
3. Press  or  button to scroll options. See setting menu
below..
 Quality
This refers to sound quality of the receiver.
 HQ: Higher
 Q (default): Regular
Note: Only HQ is available in 902~928MHz.
 RF power
Power definition will vary upon countries.
 Hi: Operation range will be greater.
 Lo (default): Operation range will be shorter.
 Mic gain
 1~16 dB (Default: 8 dB)
 Exit
4. Press the set button again to confirm the selection and leave
the setting..
5. To leave the SETTING mode, find “EXIT” on the menu and
press the set button.
15
WIRELESS ENG / EFP SYSTEM
Handheld microphone
1. Press and hold both  and power buttons simultaneously
to turn the microphone on.
2. “Setting” mode will be entered successfully for custom
adjustments.
3. Press  or  button to scroll options. See setting menu
below.
 Quality
This refers to sound quality of the receiver.
 HQ: Higher
 Q (default): Regular
Note: Only HQ is available in 902~928MHz.
 Talk mode
 PTB (default): Push to bolt
 PTT: Push to talk
 PTM: Push to mute
 RF power
Power definition will vary upon countries.
 Hi: Operation range will be greater.
 Lo (default): Operation range will be shorter.
 Mic gain
 1~16 dB (Default: 8 dB)
 Exit
4. Press the power button again to confirm the selection and
leave the setting.
5. To leave the SETTING mode, find “EXIT” on the menu and
press the power button.
16
WIRELESS ENG / EFP SYSTEM
Back to default
Dual-Antenna
Receiver
1. When device is off, press and hold ,  and power buttons
altogether to turn the receiver, transmitter or microphone on.
2. Device will be back to default settings automatically.
3. Followings list default settings of all Receiver models.






Channel: 01
Quality: Q
Squelch: Low
Output level: Line
Channel output: A+B
Receiver mode: Dual Rx
Bodypack Transmitter 



Channel: 01
Quality: Q
RF power: Low
Mic gain: 8
Handheld microphone 




Channel: 01
Quality: Q
Talk mode: PTB
RF power: Low
Mic gain: 8
17
WIRELESS ENG / EFP SYSTEM
 Troubleshooting
Not ready
18
WIRELESS ENG / EFP SYSTEM
 Specification
Not ready
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : 陳芷瑩
Comments                        : 
Company                         : 
Create Date                     : 2018:07:23 13:30:19+08:00
Modify Date                     : 2019:01:24 17:19:36+08:00
Source Modified                 : D:20180723052825
Subject                         : 
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2019:01:24 17:19:36+08:00
Creator Tool                    : Acrobat PDFMaker 11 Word 版
Document ID                     : uuid:99b5b5ac-fe92-49da-8cad-464308651d59
Instance ID                     : uuid:456bc624-febf-43e9-b2cb-e2c7693c2cc1
Format                          : application/pdf
Title                           : 
Description                     : 
Creator                         : 陳芷瑩
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Page Layout                     : OneColumn
Page Count                      : 23

EXIF Metadata provided by EXIF.tools