OKAYO Electronics EJ-880T UHF-PLL Stationery Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	354101
Application ID	n4hRwfVM8SDTeSWy5stGdg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	209.77kB (2622167 bits)
Date Submitted	2003-09-05 00:00:00
Date Available	2003-09-05 00:00:00
Creation Date	2003-05-08 19:09:10
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2003-05-08 19:09:10
Document Title	User Manual
Document Creator	CorelDRAW Version 9.397
Document Author:	kk

User's Guide
UHF-PLL
STATIONERY TRANSMITTER
A. Descriptions of Parts
UHF - PLL
EJ-880T
1. POWER
Power on/off switch.
2. CH. / SEL
Selectable switch.
3. AUDIO LEVEL
Audio volume indicator
4. MIC / VOL.
Wired mic. Volume control.
5. AUX / VOL.
Aux.
6. EAR / VOL.
Earphone output volume control.
7.
Earphone output jack (3.5 o )
Input volume control.
Earphone output jack (6.3 o )
DCIN
10 ~ 15 V
MIC IN
PHANTOM
UNBAL.
RF POWER
5V
OFF / ON
AUX / IN
Low / Hi
ANTENNA
BAL.
1. DC IN
DC input connector 10V - 12V/500mA.
2. AUX /IN
RCA Aux. Input jack.
3. BAL.
Balanced female 3-pin XLR connector for audio input.
4. UNBAL.
6.3o wired microphone input jack.
5. RF POWER
RF Output power selector LOW power / Hi power.
6. ANTENNA
TNC socket for antenna
B. Setting - UP
NOTICE : Prior to setting up, check that the transmitter and
receiver are tuned to the same frequency. Two or
above system operating in the same frquency can
not be used at the same time and area, so please
select the different frequencies which can be used
simultaneously at local area.
1. Connecting the supplired antenn to the antenna TNC
connector on the backi.
2. Check that the voltage of the suplired AC adapter conforms
to the voltage available in local area. Then plug the feeder
cable of the supplired AC adapter into DC IN socket on the
transmitter. Then plug the AC adapter into a power putlet.
3. Connect 6.3 o plug for the wired microphone in MIC. In
jack on the transmitter rear panel. Turn the MIC/VOL.
Control on the transmitter in clockwise to set the transmitter
input to receiver level.
4. RCA Aux. Input could connect with CD Player or other
audio source for transmissing music to receiver, then turn
the AUX/VOL. On the transmitter in colckwise to set the
transmitter input to receiver level.
5. For monitoring the transmission audio source, connect
earphone on the front panel earphone input jack (3.5o
or 6.3o), and turn the EAR/VOL. control to proper level.
(TX - Multi Rx)
UHF - PLL
EJ-880T
Attention:
1. Keep away from rain , water or the moisture places to avoid any
damages caused.
2. Avoid and exteranl forces or impact.
3. Do not use it in high-temperature environment.
4. Do not connect with others different specific power supply.
5. Keep the wireless microphone away from sources of interference
such as operating COMPUTERS , VCD , DVD...ect
or communication equipment.
6. If the unit is not using for long period , please make sure the
batteries are moved out.
Notice : The changes or modifications not expressly aproved by the party
responsible for compliance could voide the user's authority to
operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 4
Create Date                     : 2003:05:08 19:09:10
Modify Date                     : 2003:05:08 19:09:10
Producer                        : Corel PDF Engine Version 9.397
Author                          : kk
Creator                         : CorelDRAW Version 9.397
Title                           : WT-880T-­^¤p¥U

EXIF Metadata provided by EXIF.tools